Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “continuous models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

The reduced detailed configuration accounting (RDCA) model for the NLTE plasma special calculations

The purpose of this work is to continue development of a model to provide a fast and accurate in-line NLTE capability for calculating plasma spectral properties in large-scale radiation-transport hydrodynamic simulations. A method has recently been developed to transform the large detailed atomic models into very small models that can be used for fast in-line calculations. The reduced model is more accurate than the average-atom models conventionally used in such simulations. In the present work, spectra calculated with the reduced model are compared to the original detailed model and the average-atom model. The spectra of iron and gold plasmas under various plasma conditions are compared.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectral comparison of continuous Global Positioning System and strainmeter measurements of crustal deformation

Temporal power spectral density models of noise in continuous crustal deformation measurements obtained with the Global Positioning System (GPS) and high-quality strainmeters are compared. The crossover frequency at which GPS measurement noise is less than that of strainmeters is determined. Assuming GPS precision of 0.1 to 1 cm in horizontal components for baselines up to 100 km in length, local deformation monitoring with GPS may be preferable to strainmeters for observations of short-term deformation in under 6 months of continuous (at least daily) measurements. Short-period tropospheric path delays and multipath effects, which may obscure GPS-determined strain signals in local network measurements, also are discussed.

Tralli, David M.↗

Comment on “Review of experimental studies of secondary ice production” by Korolev and Leisner (2020)

Abstract. This is a comment on the review by Korolev and Leisner (2020, hereafter KL2020). The only two laboratory/field studies ever to measure the breakup in ice–ice collisions for in-cloud conditions were negatively criticised by KL2020, as were our subsequent theoretical and modelling studies informed by both studies. First, hypothetically, even without any further laboratory experiments, such theoretical and modelling studies would continue to be possible, based on classical mechanics and statistical physics. They are not sensitive to the accuracy of lab data for typical situations, partly because the nonlinear explosive growth of ice concentrations continues until some maximum concentration is reached. To a degree, the same final concentration is expected regardless of the fragment number per collision. Second, there is no evidence that both lab/field observational studies characterising fragmentation in ice–ice collisions are either mutually conflicting or erroneous such that they cannot be used to represent this breakup in numerical models, contrary to the review. The fact that the ice spheres of one experiment were hail sized (2 cm) is not a problem if a universal theoretical formulation, such as ours, with fundamental dependencies, is informed by it. Although both lab/field studies involved head-on collisions, rotational kinetic energy for all collisions generally is only a small fraction of the initial collision kinetic energy (CKE) anyway. Although both lab/field experiments involved fixed targets, that is not a problem since the fixing of the target is represented via CKE in any energy-based formulation such as ours. Finally, scaling analysis suggests that the breakup of ice during sublimation can make a significant contribution to ice enhancement in clouds, again contrary to the impression given by the review.

54 ENVIRONMENTAL SCIENCES↗

Effective Interpolation of Incomplete Satellite-Derived Leaf-Area Index Time Series for the Continental United States

Many earth science modeling applications employ continuous input data fields derived from satellite data. Environmental factors, sensor limitations and algorithmic constraints lead to data products of inherently variable quality. This necessitates interpolation of one form or another in order to produce high quality input fields free of missing data. The present research tests several interpolation techniques as applied to satellite-derived leaf area index, an important quantity in many global climate and ecological models. The study evaluates and applies a variety of interpolation techniques for the Moderate Resolution Imaging Spectroradiometer (MODIS) Leaf-Area Index Product over the time period 2001-2006 for a region containing the conterminous United States. Results indicate that the accuracy of an individual interpolation technique depends upon the underlying land cover. Spatial interpolation provides better results in forested areas, while temporal interpolation performs more effectively over non-forest cover types. Combination of spatial and temporal approaches offers superior interpolative capabilities to any single method, and in fact, generation of continuous data fields requires a hybrid approach such as this.

Jasinski, Michael F.↗

A detailed study of pre-heating effects in electron beam melting powder bed fusion process

Metal-based additive manufacturing processes, such as powder bed fusion with electron beam (PBF-EB) process, also referred to as electron beam melting (EBM), can produce high-density parts with minimal residual stresses due to the uniform and coherent preheating of the powder bed. However, understanding and controlling the multiple stages of preheating is required to enable the production of high-quality, consistent parts of various materials. This work presents a large-scale, multi-layer, three-dimensional numerical analysis focused on studying the preheating stages for predicting thermal history during the PBF-EB process. The model follows a continuous multi-stage cyclic process, that incorporates all the main stages of the PBF-EB process for 316 L stainless steel. This includes the gradual deposition of a new powder layer, the first and second preheating levels of the powder bed, and the energy deposition during melting (excluding the actual melt-pool behavior simulation). The model employs an adaptive time-scaling approach that automatically adjusts the energy deposition for each solution time-increment. This allows for localized changes in time-resolution over an otherwise computationally expensive multi-layer procedure. The material property variations are also taken into account, with an emphasis on the subtle irreversible changes in powder effective thermal conductivity after the two requisite preheating stages of the powder bed. This effect is studied using simplified conductivity models from the literature for partially sintered powder, validated by a dedicated experiment and numerical simulation. The large-scale model is then used to estimate the actual temperatures during first and second preheating levels for 316 L steel, which is not yet fully supported commercially for PBF-EB. Model predictions are corroborated by experiments, using and analyzing IR images, taken at the completion of each layer by the machine’s built-in infrared camera. The current model also incorporates a qualitative assessment for the effects of conductivity change during pre-heating, as well as evaluates the applicability of the time-scaling approach.

36 MATERIALS SCIENCE↗

Optimization of Airport Runway Configuration with Forecast-Augmented Offline Reinforcement Learning

Runway configuration Management (RCM) governs the optimal utilization of runways based on variables such as traffic and meteorological conditions, making it a daunting task in air traffic management due to its dependency on volatile operational and environmental factors. This paper improves upon our previous work [1] on using offline model-free reinforcement learning for creating a Runway Configuration Assistance (RCA) decision-support tool. A novel integration of forecast data from LAMP (Localized Aviation Model Output Statistics Program) and TAF (Terminal Area Forecast) is introduced, enhancing the tool’s accuracy and also its adaptability to quick wind changes. The performance is evaluated using two major US airports, Charlotte Douglas International Airport (CLT) and Denver International Airport (DEN). To counter scalability issues presented by the addition of discrete forecast variables, we transitioned to a continuous state space model, ensuring scalability and inclusion of longer forecast data. The results of our experiments reflect significant improvements in the RCA tool’s prediction accuracy.

Sumanth Nethi↗

Evaluation of trends in wheat yield models

Trend terms in models for wheat yield in the U.S. Great Plains for the years 1932 to 1976 are evaluated. The subset of meteorological variables yielding the largest adjusted R(2) is selected using the method of leaps and bounds. Latent root regression is used to eliminate multicollinearities, and generalized ridge regression is used to introduce bias to provide stability in the data matrix. The regression model used provides for two trends in each of two models: a dependent model in which the trend line is piece-wise continuous, and an independent model in which the trend line is discontinuous at the year of the slope change. It was found that the trend lines best describing the wheat yields consisted of combinations of increasing, decreasing, and constant trend: four combinations for the dependent model and seven for the independent model.

Ferguson, M. C.↗

Enhancement of detachment control with simplified real-time modelling on the KSTAR tokamak

Abstract Detachment control based on ion saturation current I sat measurements from Langmuir probes (LPs) is implemented in the KSTAR tokamak and shown to be capable of following dynamic and constant target trajectories with good accuracy, in H-mode, by moderating the flow rate of nitrogen or deuterium. I sat controllers normalize I sat in order to form attachment fraction ( A frac ) as their control parameter. The KSTAR implementation of A frac control differs from previous work in that it continuously calculates a model for attached I sat and uses that as the denominator in A frac , whereas prior implementations either record peak I sat at rollover as they pass it or take estimated I s a t , r o l l o v e r as a manual input prior to the shot. The KSTAR controller therefore does not need to keep track of rollover status and keep separate targets for pre- and post-rollover states, and it can automatically adapt to changes in scenario at any time. It is also less vulnerable to noise as it will not lock in an outlier as a rollover point.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In-Situ Detection and Prediction of WAAM Cross Feature Geometry

Abstract Wire arc additive manufacturing (WAAM) is increasingly used by manufacturers due to its relatively low cost and high deposition rate compared to other metal AM methods, but the parts produced by WAAM can be subject to localized variations in part quality. One such variation is the cross-feature defect, whereby a localized part height increase occurs due to the crossing of deposition toolpaths. Mitigation of this defect is typically achieved using manual path planning strategies, but closed-loop control is underutilized. Since the nature of this defect and of the WAAM process is such that the previous layer’s geometry influences that of the subsequent layer’s, the cross-feature defect geometry changes throughout the deposition. Therefore, any closed-loop control strategy will need to incorporate the dynamic trait of this defect. The present work seeks to implement an in-situ process modeling approach where a regression model can be continuously updated to predict the defect geometry of the subsequent deposition layer based on the historical process data. Several multi-layer cross-feature geometries are deposited and current, voltage, and optical camera data is taken for each layer. The resulting cross-feature geometries are characterized using 3D scanning and the performance and accuracy of the in-situ modeling approach is evaluated.

Thien, Austen↗

Calculations of particle-laden flows by second-moment closures

A differential second-moment closure is applied to calculate nonswirling turbulent particle-laden jet flow. The closure is effected by extending constant-density single-phase turbulence models to the continuous (carrier) phase of two-phase flow. The dispersed (discrete) phase is treated by stochastic-Lagrangian technique. To reduce the effects of numerical (false) diffusion on the predicted results, a higher order differencing scheme, namely the flux-spline, is employed. In addition, an experimental study is conducted to provide data of good quality, especially near the inlet, for model assessment. The experiment consists of a confined coaxial jet flow of air with glass beads. The beads' diameter is 105 microns and is injected from the inner jet with a mass loading ratio of 0.9. The computed results are in good agreement with experimental data, especially for the carrier phase. However, the predicted turbulence fluctuations associated with the discrete phase are lower than the data at the downstream region of the flow field.

Nikjooy, M.↗

Modes of interconnected lattice trusses using continuum models, part 1

This represents a continuing systematic attempt to explore the use of continuum models--in contrast to the Finite Element Models currently universally in use--to develop feedback control laws for stability enhancement of structures, particularly large structures, for deployment in space. We shall show that for the control objective, continuum models do offer unique advantages. It must be admitted of course that developing continuum models for arbitrary structures is no easy task. In this paper we take advantage of the special nature of current Large Space Structures--typified by the NASA-LaRC Evolutionary Model which will be our main concern--which consists of interconnected orthogonal lattice trusses each with identical bays. Using an equivalent one-dimensional Timoshenko beam model, we develop an almost complete continuum model for the evolutionary structure. We do this in stages, beginning only with the main bus as flexible and then going on to make all the appendages also flexible-except for the antenna structure. Based on these models we proceed to develop formulas for mode frequencies and shapes. These are shown to be the roots of the determinant of a matrix of small dimension compared with mode calculations using Finite Element Models, even though the matrix involves transcendental functions. The formulas allow us to study asymptotic properties of the modes and how they evolve as we increase the number of bodies which are treated as flexible. The asymptotics, in fact, become simpler.

Balakrishnan, A. V.↗

SLOW HEATING MODEL OF GAMMA-RAY BURST: PHOTON SPECTRUM AND DELAYED EMISSION

We propose a new mechanism for the prompt emission of gamma-ray burst. In our model, electrons are continuously accelerated in the post-shock region via plasma turbulence. Using the Monte Carlo technique, we mimic the second-order Fermi acceleration due to plasma turbulence and obtain photon spectra. Since the acceleration balances with the synchrotron cooling, the observed low-energy spectral index is naturally explained. The resultant spectra can be consistent with observed spectra at least below approx1 MeV. The model also predicts delayed GeV-TeV emission due to inverse Compton and broad pulse profile of optical emission in some cases. Although nontrivial assumptions are required to reproduce MeV-GeV power-law spectra, the model implies the possibility of explaining various kinds of luminosity correlations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Patches in the polar ionosphere: UT and seasonal dependence

The seasonal and Universal Time (UT) dependencies of patches in the polar ionosphere are simulated using the Utah State University time dependent ionospheric model (TDIM). Patch formation is achieved by changing the plasma convection pattern in response to temporal changes in the interplanetary magnetic field (IMF) B(sub y) component during periods of southwrd IMF. This mechanism redirects the plasma flow from the dayside high-density region, which is the source of the tongue of ionization (TOI) density feature, through the throat and leads to patches, rather than a continuous TOI. The model predicts that the patches are absent at winter solstice (northern hemisphere) between 0800 and 1200 UT and that they have their largest seasonal intensity at winter solstice between 2000 and 2400 UT. Between winter solstice and equinox, patches are strong and present all day. Patches are present in summer as well, although their intensity is only tens of percent above the background density. These winter-to-equinox findings are also shown to be consistent with observations. The model was also used to predict times at which patch observations could be performed to determine the contributions from other patch mechanisms. This observational window is +/- 20 days about winter solstice between 0800 and 1200 UT in the northern hemisphere. In this observational window the TOI is either absent or reduced to a very low density. Hence the time dependent electric field mechanism considered in this study does not produce patches, and if they are observed, then they must be due to some other mechanism.

Sojka, J. J.↗

Effect of photochemical models on calculated equilibria and cooling rates in the stratosphere

The determination of the relaxation time of a temperature perturbation in the stratosphere must take into account the effects of the absorption of solar energy by ozone, while the ozone density itself is dependent on temperature. A photochemical model, consisting of continuity equations for each of 29 constituents with reaction rates and adjustment times, is used to obtain the vertical distribution of ozone. The altitude range from 35 to 60 km in non-Arctic regions is shown to be in approximate joint radiative-photochemical equilibrium. The temperature and ozone distributions are thus well buffered. Modest changes in ozone and temperature were calculated on the basis of this model from large changes in cooling rates and reaction rates, and the results are shown to be more in line with actual observations. The importance of estimating the mixing ratios for NO and H2O is emphasized.

Blake, D.↗

Photochemistry and dynamics of the ozone layer

The paper presents a broad review of the photochemical and dynamic theories of the ozone layer. The two theories are combined into the MIT three-dimensional dynamic-chemical quasi-geostrophic model with 26 levels in the vertical spaced in logarithmic pressure coordinates between the ground and 72-km altitude. The chemical scheme incorporates the important odd nitrogen, odd hydrogen, and odd oxygen chemistry, but is simplified in the sense that it requires specification of the distributions of NO2, OH and HO2. The prognostic equations are the vorticity equation, the perturbation thermodynamic equation, and the global mean and perturbation continuity equations for ozone; diagnostic equations include the hydrostatic equation, the balance condition, and the mass continuity equation. The model is applied to the investigation of the impact of supersonic aircraft on the ozone layer.

Prinn, R. G.↗

The Impact of IBM Cell Technology on the Programming Paradigm in the Context of Computer Systems for Climate and Weather Models

The call for ever-increasing model resolutions and physical processes in climate and weather models demands a continual increase in computing power. The IBM Cell processor's order-of-magnitude peak performance increase over conventional processors makes it very attractive to fulfill this requirement. However, the Cell's characteristics, 256KB local memory per SPE and the new low-level communication mechanism, make it very challenging to port an application. As a trial, we selected the solar radiation component of the NASA GEOS-5 climate model, which: (1) is representative of column physics components (half the total computational time), (2) has an extremely high computational intensity: the ratio of computational load to main memory transfers, and (3) exhibits embarrassingly parallel column computations. In this paper, we converted the baseline code (single-precision Fortran) to C and ported it to an IBM BladeCenter QS20. For performance, we manually SIMDize four independent columns and include several unrolling optimizations. Our results show that when compared with the baseline implementation running on one core of Intel's Xeon Woodcrest, Dempsey, and Itanium2, the Cell is approximately 8.8x, 11.6x, and 12.8x faster, respectively. Our preliminary analysis shows that the Cell can also accelerate the dynamics component (~;;25percent total computational time). We believe these dramatic performance improvements make the Cell processor very competitive as an accelerator.

97 MATHEMATICS AND COMPUTING↗

Projecting spatiotemporally explicit effects of climate change on stream temperature: A model comparison and implications for coldwater fishes

Conservation planners and resource managers seek information about how the availability and locations of cold-water habitats will change in the future and how these predictions vary among models. In this work, we used a physical process-based model to demonstrate the implications of climate change for streamflow and water temperature in two watersheds with distinctive flow regimes: the Snoqualmie watershed (WA) and Siletz watershed (OR), USA. Our model incorporated a downscaled ensemble of global climate model outputs and was calibrated with in situ and remotely sensed water temperatures. Furthermore, we compared predictions from our processed-based model to those from a publicly available and widely used statistical model. The process-based model projected greater changes in summer maximum water temperatures for the mixed-rain-snow Snoqualmie watershed than for the rain-dominated Siletz watershed as a result of the near-complete loss of winter snowpack and significant reduction in summer flow in the Snoqualmie watershed expected by the 2080s. Both models projected generally similar future spatial patterns of maximum water temperature in the two rivers, with cool reaches distributed farther upstream and fewer in number. However, the process-based model projected higher spatial heterogeneity in water temperature due to our spatially explicit simulation of streamflow and because we calibrated the model with spatially continuous remotely sensed water temperature data. We used stream temperature projections to assess the vulnerability of Pacific salmon and trout to changes in the spatial distribution of cold-water habitats during August by the 2080s. Results suggest that salmonids may have fewer summertime cold-water habitats in both watersheds. Projected stream warming may further limit particular species and life stages, especially in the Snoqualmie watershed. Our comparison of models highlights the importance of considering what might be gained by using a process-based model for evaluating and prioritizing management actions that mitigate climate impacts on cold-water habitats for stream fishes.

54 ENVIRONMENTAL SCIENCES↗

Curating Carbon Storage Data for Reuse: Enabling Research and Modeling from Earth’s Surface to Subsurface

The volume of public geologic carbon storage (GCS) data resources has continued to increase in recent years as the result of an increase in funding from government, industry, and academia towards national, basin, regional and field scale studies to ensure carbon capture and storage becomes a commercially viable operation. Despite the increasing volume of data, GCS data applied towards analyses such as geologic, cost, and risk modeling continues to be multi-sourced and often disparate in nature, published across government agencies, websites, data repositories and buried in derivative reports and documents. Much of the time preparing for an analysis and derivative product development is spent collecting, aggregating, transforming and preparing input data. There have been significant efforts within the DOE National Energy Technology Laboratory’s Carbon Storage Program to optimize multi-source, multi-scale subsurface geologic data curation and aggregation to support data discovery, interoperability, and reuse. Methods include the use of artificial intelligence, machine learning, and data science techniques. This talk will discuss the workflows, best practices, and processes developed to support the aggregation and curation of data through the whole system – surface to subsurface data - that support multi-scale, multi-purpose analysis for carbon storage research.

Morkner, Paige↗