Components for atomistic-to-continuum multiscale modeling of flow in micro- and nanofluidic systems.
Abstract not provided.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract not provided.
Runoff and soil moisture are two key components of the global hydrologic cycle that should be validated at local to global scales in Earth System Models (ESMs) used for climate projection. Here, we have evaluated the runoff and surface soil moisture output by the Community Climate System Model (CCSM) along with 8 other models from the Coupled Model Intercomparison Project (CMIP5) repository using satellite soil moisture observations and stream gauge corrected runoff products. A series of Community Land Model (CLM) runs forced by reanalysis and coupled model outputs was also performed to identify atmospheric drivers of biases and uncertainties in the CCSM. Results indicate that surface soil moisture simulations tend to be positively biased in high latitude areas by most selected CMIP5 models except CCSM, FGOALS, and BCC, which share similar land surface model code. With the exception of GISS, runoff simulations by all selected CMIP5 models were overestimated in mountain ranges and in most of the Arctic region. In general, positive biases in CCSM soil moisture and runoff due to precipitation input error were offset by negative biases induced by temperature input error. Excluding the impact from atmosphere modeling, the global mean of seasonal surface moisture oscillation was out of phase compared to observations in many years during 1985–2004. The CLM also underestimated runoff in the Amazon, central Africa, and south Asia, where soils all have high clay content. We hypothesize that lack of a macropore flow mechanism is partially responsible for this underestimation. However, runoff was overestimated in the areas covered by volcanic ash soils (i.e., Andisols), which might be associated with poor soil porosity representation in CLM. Finally, our results indicate that CCSM predictability of hydrology could be improved by addressing the compensating errors associated with precipitation and temperature and updating the CLM soil representation.
Principal Component Analysis can be used to reduce the cost of Computational Fluid Dynamics simulations of turbulent reacting flows by reducing the dimensionality of the transported variables through projection of the thermochemical state onto a lower-dimensional manifold. However, because of the nonlinearity of the principal component source terms, nonlinear regression techniques must be utilized for the source terms in terms of the principal components. Unfortunately, widely available and utilized nonlinear regression techniques can have prohibitive computational requirements and/or accuracy that is highly dependent on user experience in ad hoc tuning of model architecture and hyperparameters. Here, in this work, a new nonlinear regression approach is proposed that is both computationally efficient and automated so does not require any user input. The approach is evaluated through a priori prediction of principal component source terms using data from a Direct Numerical Simulation of a turbulent nonpremixed n-heptane/air jet flame. In particular, the proposed framework consists of local regressions whose complexity is adapted according to the local nonlinearity of the data: local linear regression when accurate enough and local Artificial Neural Networks when nonlinear regression is required. The number of local clusters for local regression is determined automatically using the Davies-Bouldin index. In addition, Bayesian optimization is utilized for model training (i.e., to select the best architectures and hyperparameters of the nonlinear regressions in an unsupervised fashion), eliminating ad hoc hand-tuning and/or expensive grid searches. Overall, compared to a single, global neural network, the new local adaptive regression approach is shown to have comparable accuracy but 69% less training time due to the utilization of local linear regression and faster training of local neural networks.
Extracellular deposits containing hydroxyapatite, lipids, proteins, and trace metals that form between the basal lamina of the RPE and the inner collagenous layer of Bruch’s membrane are hallmarks of early AMD. We examined whether cultured RPE cells could produce extracellular deposits containing all of these molecular components. Retinal pigment epithelium cells isolated from freshly enucleated porcine eyes were cultured on Transwell membranes for up to 6 months. Deposit composition and structure were characterized using light, fluorescence, and electron microscopy; synchrotron x-ray diffraction and x-ray fluorescence; secondary ion mass spectroscopy; and immunohistochemistry. Apparently functional primary RPE cells, when cultured on 10-lm-thick inserts with 0.4-lm-diameter pores, can produce sub-RPE deposits that contain hydroxyapatite, lipids, proteins, and trace elements, without outer segment supplementation, by 12 weeks. In conclusion, the data suggest that sub-RPE deposit formation is initiated, and probably regulated, by the RPE, as well as the loss of permeability of the Bruch’s membrane and choriocapillaris complex associated with age and early AMD. This cell culture model of early AMD lesions provides a novel system for testing new therapeutic interventions against sub-RPE deposit formation, an event occurring well in advance of the onset of vision loss.
The grant supported the development of new tools to accelerate the spin up of the marine biogeochemical component of earth system models. The grant also supported the development of new diagnostic tools based on the application of these tools.
This dataset contains supporting documents and images for ESS-DIVE terrestrial model data archiving guidelines.Terrestrial models are broadly defined as numerical models that couple both land dynamics and energy, water, carbon, or nutrient fluxes. We created these guidelines based on input from the U.S. Department of Energy’s Biological and Environmental Research land modeling community. The guidelines are intended to help modelers determine which components of their terrestrial model data associated with publication should be archived. Based on input from the land modeling community, the guidelines recommend archiving both model input and testing data, as well as code, script, and metadata. The guidelines also recommend archiving model data output, depending on the limitations set by data repositories. Lastly, we provide recommendations for bundling data files for publication as well as a discussion about tools that can facilitate model data archiving and reuse.This dataset is an archive of the associated GitHub repository for our model archiving guidelines (https://github.com/ess-dive-community/essdive-model-data-archiving-guidelines). The ‘README.pdf’ file gives a general introduction to the guidelines, and the ‘instructions.pdf’ file provides more detailed steps for following the guidelines. We also provide 2 figures in this data package: 1) a decision tree (model_data_guidelines_decision_tree.png) that can help users determine which components of their model data to archive. and 2) the ‘model_data_guidelines_flmd.png’ file depicts the different files that can be archived in addition to the model data itself. Lastly, we include 3 digitized tables from our associated manuscript and 3 CSV files with anonymized input from DOE scientists about the importance of different aspects of model data archiving from which we developed the guidelines.Dataset updates for v1.1.0: We updated this data package on 2021-11-22 in response to review comments on our related manuscript. In this update we removed one figure so that the model archiving guidelines are conveyed in text rather than an image. We updated the file-level metadata (FLMD) figure to be in accord with the most recent FLMD recommendations. We made minor edits to the README file to update the recommended citation and added two co-authors. We also added 6 new data files (3 are anonymized input from DOE scientists that helped to inform guidelines, and 3 are digitized tables from our manuscript.
We formulate an analytical model of the coronal-phase acceleration observed in the beginning of major solar energetic particle (SEP) events, before the main-phase acceleration associated with coronal mass ejections (CMEs) in solar wind. The model is driven and constrained by the broadband observations of SEPs and CMEs, in particular SEP data from the particle telescope of the Energetic and Relativistic Nuclei and Electron (ERNE) experiment on the Solar and Heliospheric Observatory (SOHO) spacecraft, solar radio spectrograms, and low-corona observations of CMEs. The model is also verified against observations of solar high-energy neutrons and neutron-decay protons. The model suggests SEP acceleration above {approx} 50 MeV nucleon{sup -1} by coronal shock and the shock-amplified turbulence in closed magnetic structures, and particle release at magnetic reconnection between the closed structure of expanding CME and pre-existing open magnetic flux tubes. The analytical model connects parameters of coronal shocks and structures and the SEP parameters in space, which facilitates analysis of multiwavelength data and will assist in further development of coronal acceleration models.
The paper describes a case study of an information technology office building with a radiant cooling system and a conventional variable air volume (VAV) system installed side by side so that performancecan be compared. First, a 3D model of the building involving architecture, occupancy, and HVAC operation was developed in EnergyPlus, a simulation tool. Second, a different calibration methodology was applied to develop the base case for assessing the energy saving potential. This paper details the calibration of the whole building energy model to the component level, including lighting, equipment, and HVAC components such as chillers, pumps, cooling towers, fans, etc. Also a new methodology for the systematic selection of influence parameter has been developed for the calibration of a simulated model which requires large time for the execution. The error at the whole building level [measured in mean bias error (MBE)] is 0.2%, and the coefficient of variation of root mean square error (CvRMSE) is 3.2%. The total errors in HVAC at the hourly are MBE = 8.7% and CvRMSE = 23.9%, which meet the criteria of ASHRAE 14 (2002) for hourly calibration. Different suggestions have been pointed out to generalize the energy saving of radiant cooling system through the existing building system. So a base case model was developed by using the calibrated model for quantifying the energy saving potential of the radiant cooling system. It was found that a base case radiant cooling system integrated with DOAS can save 28% energy compared with the conventional VAV system.
3C 400.2 belongs to the mixed-morphology supernova remnant class, showing center-filled X-ray and shell-like radio morphology. We present a study of 3C 400.2 with archival Suzaku and Fermi -LAT observations. We find recombining plasma (RP) in the Suzaku spectra of north–east and south–east regions. The spectra of these regions are well described by two-component thermal plasma models: the hard component is in RP, while the soft component is in collisional ionization equilibrium (CIE) conditions. The RP has enhanced abundances, indicating that the X-ray emission has an ejecta origin, while the CIE has solar abundances associated with the interstellar material. The X-ray spectra of north–west and south–west regions are best fitted by a two-component thermal plasma model: an ionizing and a CIE plasma. We have detected GeV gamma-ray emission from 3C 400.2 at the level of ∼5 σ , assuming a point-like source model with a power-law (PL) type spectrum. We have also detected a new GeV source at the level of ∼13 σ, assuming a Gaussian extension model with a PL-type spectrum in the neighborhood of the supernova remnant. We report the analysis results of 3C 400.2 and the new extended gamma-ray source, and discuss the nature of gamma-ray emission of 3C 400.2 in the context of existing NANTEN CO data, Dominion Radio Astrophysical Observatory H i data, and the Suzaku X-ray analysis results.
This report provides models for predicting composition-properties for tellurite glasses, namely specific gravity and glass transition temperature. Included are the partial specific coefficients for each model, the component validity ranges, and model fit parameters.
A framework for a fully implicit solution method is implemented into (1) the High Order Methods Modeling Environment (HOMME), which is a spectral element dynamical core option in the Community Atmosphere Model (CAM), and (2) the Parallel Ocean Program (POP) model of the global ocean. Both of these models are components of the Community Climate System Model (CCSM). HOMME is a development version of CAM and provides a scalable alternative when run with an explicit time integrator. However, it suffers the typical time step size limit to maintain stability. POP uses a time-split semi-implicit time integrator that allows larger time steps but less accuracy when used with scale interacting physics. A fully implicit solution framework allows larger time step sizes and additional climate analysis capability such as model steady state and spin-up efficiency gains without a loss in scalability. This framework is implemented into HOMME and POP using a new Fortran interface to the Trilinos solver library, ForTrilinos, which leverages several new capabilities in the current Fortran standard to maximize robustness and speed. The ForTrilinos solution template was also designed for interchangeability; other solution methods and capability improvements can be more easily implemented into the models as they are developed without severely interacting with the code structure. The utility of this approach is illustrated with a test case for each of the climate component models.
This report summarizes a joint effort between Argonne National Laboratory, Idaho National Laboratory, and Los Alamos National Laboratory to develop and deploy constitutive models targeted at predicting the life of Grade 91 alloy components subjected to high temperature environments typical of those that structural components in advanced nuclear reactors would experience. Two distinct, but complementary constitutive modeling approaches have been taken here. The first employs a phenomenological viscoplastic model for which parameters have been calibrated based on experimental data for a wide range of Grade 91 alloy that has undergone a variety of processing. A Bayesian approach was used to derive distributions of uncertain parameters for this model based on this data set. The second approach is a reduced order model suitable for engineering-scale analysis that is based on the results of a large set of mesoscale simulations. Mesoscale models allow for the microstructure and composition of a particular alloy to be directly taken into account in the computation of the viscoplastic response, but are computationally expensive, which makes it impractical to directly call those models for the material constitutive response in an engineering-scale simulation. The reduced-order representation of the response of the underlying model used here allows for an engineering-scale model to take into account the characteristics of the underlying microstructure, while only incurring a reasonable computational expense. Both of these approaches have different strengths, and are applicable for different parts of the design/analysis process. The phenomenological models can be readily parameterized based on a set of experimental data for a given class of materials and used for scoping calculations. Once a specific material is chosen and adequately characterized, the reduced order models can accurately predict the response of that specific alloy, and because the models are based on predictive models of the underlying microstructure, they can be used to more confidently predict the response under conditions in regions where there is limited experimental data. Both of these models have been integrated in the Grizzly code, which is used here to perform proof-of-concept uncertainty quantification analyses of a simple component under prototypical conditions. The built- in stochastic analysis capabilities in the MOOSE framework that Grizzly is built on are used here to run large sets of simulations for this uncertainty quantification analysis. As would be expected, because the reduced order models are developed for a much more tightly defined alloy, they predict tighter distributions of the time to failure than the phenomenological models, which are calibrated to a broader set of data. Also important is that these simulations demonstrate that a reduced order modeling approach can be successfully deployed to propagate uncertainties from the material scale to practical engineering-scale component simulations.
The XA region of the Cygnus Loop is a bright knot of X-ray emission on the eastern edge of the supernova remnant. The emission results from the interaction of the supernova blast wave with density enhancements at the edge of a precursor formed cavity. However, this interaction is complex given the irregular morphology of the cavity wall. To study the nature and origin of the X-ray emission, we use high spatial resolution images from Chandra. We extract spectra from these images to analyze the physical conditions of the plasma. Our goal is to probe the density of various regions to form a picture of the cavity wall and characterize the interaction between this supernova and the local interstellar medium. We find that a series of regions along the edge of the X-ray emission appears to trace out the location of the cavity wall. The best-fit plasma models result in two temperature component equilibrium models for each region. The low-temperature components have densities that are an order of magnitude higher than the high-temperature components. The high-density plasma may exist in the cavity wall where it equilibrates rapidly and cools efficiently. The low-density plasma is interior to the enhancement and heated further by a reverse shock from the wall. Calculations of shock velocities and timescales since shock heating are consistent with this interpretation. Furthermore, we find a bright knot of emission indicative of a discrete interaction of the blast wave with a high-density cloud in the cavity wall with a size scale {approx}0.1 pc. Aside from this, other extractions made interior to the X-ray edge are confused by line-of-sight projection of various components. Some of these regions show evidence of detecting the cavity wall but their location makes the interpretation difficult. In general, the softer plasmas are well fit at temperatures (kT){approx} 0.11 keV, with harder plasmas at temperatures of (kT){approx} 0.27 keV. All regions displayed consistent metal depletions most notably in N, O, and Ne at an average of 0.54, 0.55, and 0.36 times solar, respectively.
The component concentration limits that most influence the predicted Hanford life-cycle HLW glass volume by HTWOS were re-evaluated. It was assumed that additional research and development work in glass formulation and melter testing would be performed to improve the understanding of component effects on the processability and product quality of these HLW glasses. Recommendations were made to better estimate the potential component concentration limits that could be applied today while technology development is underway to best estimate the volume of HLW glass that will eventually be produced at Hanford. The limits for concentrations of P2O5, Bi2O3, and SO3 were evaluated along with the constraint used to avoid nepheline formation in glass. Recommended concentration limits were made based on the current HLW glass property models being used by HTWOS (Vienna et al. 2009). These revised limits are: 1) The current ND should be augmented by the OB limit of OB ≤ 0.575 so that either the normalized silica (NSi) is less that the 62% limit or the OB is below the 0.575 limit. 2) The mass fraction of P2O5 limit should be revised to allow for up to 4.5 wt%, depending on CaO concentrations. 3) A Bi2O3 concentration limit of 7 wt% should be used. 4) The salt accumulation limit of 0.5 wt% SO3 may be increased to 0.6 wt%. Again, these revised limits do not obviate the need for further testing, but make it possible to more accurately predict the impact of that testing on ultimate HLW glass volumes.
It is well-known that distributed parameter computational fluid dynamics (CFD) models provide more accurate results than conventional, lumped-parameter unit operation models used in process simulation. Consequently, the use of CFD models in process/equipment co-simulation offers the potential to optimize overall plant performance with respect to complex thermal and fluid flow phenomena. Because solving CFD models is time-consuming compared to the overall process simulation, we consider the development of fast reduced order models (ROMs) based on CFD results to closely approximate the high-fidelity equipment models in the co-simulation. By considering process equipment items with complicated geometries and detailed thermodynamic property models, this study proposes a strategy to develop ROMs based on principal component analysis (PCA). Taking advantage of commercial process simulation and CFD software (for example, Aspen Plus and FLUENT), we are able to develop systematic CFD-based ROMs for equipment models in an efficient manner. In particular, we show that the validity of the ROM is more robust within well-sampled input domain and the CPU time is significantly reduced. Typically, it takes at most several CPU seconds to evaluate the ROM compared to several CPU hours or more to solve the CFD model. Two case studies, involving two power plant equipment examples, are described and demonstrate the benefits of using our proposed ROM methodology for process simulation and optimization.
A building energy analysis system includes a building component library configured to store a plurality of building components, a modeling tool configured to access the building component library and create a building model of a building under analysis using building spatial data and using selected building components of the plurality of building components stored in the building component library, a building analysis engine configured to operate the building model and generate a baseline energy model of the building under analysis and further configured to apply one or more energy conservation measures to the baseline energy model in order to generate one or more corresponding optimized energy models, and a recommendation tool configured to assess the one or more optimized energy models against the baseline energy model and generate recommendations for substitute building components or modifications.
In the nuclear industry, risk monitors are intended to provide a point-in-time estimate of the system risk given the current plant configuration. Current risk monitors are limited in that they do not properly take into account the deteriorating states of plant systems, structures, and components (SSCs), which are unit-specific. Current approaches to computing risk monitors use probabilistic risk assessment (PRA) techniques, but the assessment is typically a snapshot in time. Living PRA models attempt to address limitations of traditional PRA models in a limited sense by including temporary changes in plant and system configurations. However, information on plant component health are not considered. This often leaves risk monitors using living PRA models incapable of conducting evaluations with dynamic degradation scenarios evolving over time. There is a need to develop enabling approaches to solidify risk monitors to provide time and condition-dependent risk by integrating traditional PRA models with condition monitoring and prognostic techniques [1]. This paper presents a novel hazard-rate based model of incorporating degradation of nuclear SSCs into an existing PRA model. Time-varying instantaneous hazard-rate of component is used to model degradation based on time-varying performance measure. The instantaneous hazard-rate is used to determine and update time-varying probability of failure of the components in their PRA models. The method is applied to estimate evolution of probability of failure of an in-service pump using vibration measurement taken while the pump undergoes degradation.