Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “commissioning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

The LCLS-II Photo-Injector Drive Laser System

We present the new drive laser system for the photo-injector of the LCLS-II XFEL at SLAC, including the first commissioning results and challenges encountered due to high power, high repetition rate ultraviolet laser operation.

43 PARTICLE ACCELERATORS↗

Concrete Testing Case for Closure of Handford’s 241-C Underground Storage Tanks

Sixty percent of the nation's highly toxic and radioactive mixed wastes are stored at Hanford in 177 deteriorating underground storage tanks. To close or remove these storage tanks from service and place them in a condition that is protective of human health and the environment, the tanks must be physically stabilized to prevent subsidence once wastes have been retrieved. Remaining residual liquid waste in the tanks that cannot be removed must be solidified and the solid wastes encapsulated to meet the Nuclear Regulatory Commission, Department of Energy, Environmental Protection Agency, and the State of Washington requirements. The Department of Energy has developed cementitious flowable concretes to restrict access and provide chemical stabilization for radionuclides. Formulation, laboratory, and field testing for application at Hanford began with flowable, self-leveling structural and non-structural fills. A slump flow equal to or greater than 610 mm, 0% bleed water, and 0.1% (by volume) shrinkage measurements were key parameters guiding reformulation efforts that resulted in highly flowable, self-consolidating concretes that met Hanford 241-C Tank closure short- and long-term regulatory and engineering performance requirements.

formula development↗

Updated U.S. Low-Temperature Heating and Cooling Demand by County and Sector

This dataset includes U.S. low-temperature heating and cooling demand at the county level in major end-use sectors: residential, commercial, manufacturing, agricultural, and data centers. Census division-level end-use energy consumption, expenditure, and commissioned power database were dis-aggregated to the county level. The county-level database was incorporated with climate zone, numbers of housing units and farms, farm size, and coefficient of performance (COP) for heating and cooling demand analysis. This dataset also includes a paper containing a full explanation of the methodologies used and maps. Residential data were updated from the latest Residential Energy Consumption Survey (RECS) dataset (2015) using 2020 census data. Commercial data were baselined off the latest Commercial Building Energy Consumption Survey (CBECS) dataset (2012). Manufacturing data were baselined off the latest Manufacturing Energy Consumption Survey (MECS) dataset (2021).

15 GEOTHERMAL ENERGY↗

Comminty Geothermal: Planning and Design of a Heating and Cooling System in Framingham, Massachusetts

These reports, plans, and drawings review the achievements of Home Energy Efficiency Team (HEET) and its partners to plan and design a network of interconnected ground-source heat pump systems, or geothermal network, in an area encompassing multiple environmental justice (EJ) neighborhoods in the City of Framingham, MA. The materials provided in this dataset include, a) stakeholder and design best practices, b) study on optimal method to interconnect geothermal loops, c) guidelines for monitoring and metering, d) operations and maintenance plans, e) permitting guidelines and f) 10-day driller tutorial curriculum. These materials can guide the efficient and ethical design of future geothermal networks nationwide. The capacity of the system is estimated at 217 tons and is designed to provide 100% of heating and cooling needs for the buildings connected to the loop. In this project, 80 boreholes are used as the main thermal resources, the distribution system (or loop) consists of 0.61 miles of an 8-inch single-pipe at ambient temperature, with the capacity to connect 44 buildings, including 13 apartment buildings from the Framingham Housing Authority, one transitional home, one school building and 29 single family homes. While Framingham already has a geothermal network loop that is currently in the commissioning stage, our proposed project is unique because it is the first utility-led expansion loop (2nd loop) project that will connect to an adjacent existing geothermal loop (1st loop) in a pre-existing neighborhood. Both the 1st and 2nd loops are being installed, owned and operated by Eversource Energy, the utility Deployment Partner.

15 GEOTHERMAL ENERGY↗

Standard atomic weights of the elements 2021 (IUPAC Technical Report)

Following the reviews of atomic-weight determinations and other cognate data in 2015, 2017, 2019 and 2021, the IUPAC (International Union of Pure and Applied Chemistry) Commission on Isotopic Abundances and Atomic Weights (CIAAW) reports changes of standard atomic weights. The symbol A r°(E) was selected for standard atomic weight of an element to distinguish it from the atomic weight of an element E in a specific substance P, designated A r(E, P). The CIAAW has changed the values of the standard atomic weights of five elements based on recent determinations of terrestrial isotopic abundances. The standard atomic weight of argon and lead have changed to an interval to reflect that the natural variation in isotopic composition exceeds the measurement uncertainty of A r(Ar) and A r(Pb) in a specific substance. The standard atomic weights and/or the uncertainties of fourteen elements have been changed based on the Atomic Mass Evaluations 2016 and 2020 accomplished under the auspices of the International Union of Pure and Applied Physics (IUPAP). A r° of Ho, Tb, Tm and Y were changed in 2017 and again updated in 2021.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Optimization of the BDX experiment for Light Dark Matter searches at JLab

The Light Dark Matter (LDM) hypothesis postulates the existence of a new class of sub GeV particles, neutral under Standard Model (SM) interactions. In its simplest form, LDM consists of particles ¿ with masses below 1 GeV/c2, interacting with SM particles via a new force mediated by a light, spin-1 boson A0, commonly referred to as “Dark Photon”. This framework envisions a distinct “Dark Sector” with its own particles and interactions, offering a theoretically well motivated explanation for Dark Matter, consistent with astrophysical observations and a thermal production mechanism. The Beam Dump eXperiment (BDX) is an approved experiment at Jefferson Lab designed to search for Light Dark Matter. BDX will utilize an 11 GeV electron beam impinging on a thick target to produce a forward-boosted secondary beam of Light Dark Matter particles, which will then be detected by a dedicated downstream detector. Approved in 2018, BDX is expected to be commissioned in 2026 and run in 2027-2029. My thesis focuses on the preparatory work to deploy the BDX experiment. The detector design has been optimized to balance practicality with enhanced Light Dark Matter detection capabilities. Extensive characterization of detector components has been performed to ensure a precise understanding of detector response. A custom Monte Carlo framework has been developed to simulate Light Dark Matter signal and explore various theoretical models of interest. Additionally, a comprehensive data analysis framework has been developed to maximize the experiment sensitivity to Light Dark Matter, with optimizations based on expected detector performance. The ultimate goal of this thesis is to optimize BDX as a flagship experiment in Light Dark Matter searches, enabling it to probe different Dark Matter models.

Spreafico, M. [Univ. of Genova (Italy)]↗

2011 Atlanta, Georgia, Regional Travel Survey

The 2011 Regional Travel Survey collected trip data from households across 20 counties in and around Atlanta, Georgia, to improve regional travel demand forecasts. The survey was conducted by PTV NuStats, GeoStats, and PG Americas Inc. on behalf of the Atlanta Regional Commission. The goal was to collect trip data from a minimum of 10,000 households with a subsample of 1,000 households providing global positioning system (GPS) data. The GPS add-on consisted of two sample groups. The first sample group was provided with GPS devices to install in their personal vehicles (797 vehicles) to collect the speed and location of a vehicle during an assigned study period. The second sample group (1,653 participants) was provided with a wearable GPS device to collect the speed and location of an individual during an assigned study period. People participating in the wearable add-on part of the study were chosen because their travel diaries reported use of public transit in day-to-day travel. Each GPS participant was grouped into either the spring phase (March to May 2011) or the fall phase (July to September 2011), and data were recorded for a maximum of seven days for vehicle units and three days for wearable units.

1Hz data↗

2015-2017 California Vehicle Survey

The 2015-2017 California Vehicle Survey of residential and commercial light-duty vehicle owners in California assessed consumer preferences for vehicles and included a targeted sample of plug-in electric vehicle (PEV) owners. Resource Systems Group conducted the survey on behalf of the California Energy Commission. In addition to economic and demographic data, the survey integrated light-duty vehicle holding and use information with vehicle choice data collected via the stated preferences survey's set of eight vehicle and fuel type choice exercises. The PEV owner survey participants provided additional data on charging behavior, electricity rates, and their main motivations for purchasing PEVs.

1Hz data↗

2013 California Vehicle Survey

The 2013 California Vehicle Survey (CVS) collected data on household and commercial vehicle usage, and on future vehicle purchases. ICF International conducted the survey on behalf of the California Energy Commission. Approximately 8,000 respondents, from California households and businesses, completed the survey. The household component of the CVS included a selection of households from the 2010-2012 California Household Travel Survey (CHTS), who had stated their intention to purchase a vehicle in the near future. Both household surveys used the same survey ID numbers enabling the integration of responses. The commercial vehicle component of the CVS—a stand-alone survey of commercial fleet owners in California—asked vehicle owners questions pertaining to economic and demographic attributes, current fleets, and preferences about planned vehicle purchases.

1Hz data↗

2007 Chicago Regional Household Travel Inventory

To provide data for developing and refining travel demand forecast models, the 2007 Regional Household Travel Inventory studied the demographic and travel behavior characteristics of residents in the greater Chicago area. It included households in eight counties in Illinois and three in Indiana. The Chicago Metropolitan Agency for Planning conducted the study in coordination with the Illinois Department of Transportation, the Northwestern Indiana Regional Planning Commission, and the Indiana Department of Transportation. Travel and activity information for all household members (regardless of age) was collected during a randomly assigned 24- or 48-hour period. It relied on the willingness of households to provide detailed information about their members and vehicles, and to record all travel and associated activity during the collection period. This study also featured a subsample of households collecting data via in-vehicle and wearable global positioning system devices.

1Hz data↗

2012-2013 Delaware Valley Household Travel Survey

The 2012-2013 Delaware Valley Household Travel Survey collected data for multiple planning purposes such as the calibration of a new activity-based travel demand model. It features data from households across nine counties in the region, including southern New Jersey and southeastern Pennsylvania. The Delaware Valley Regional Planning Commission (DVRPC) sponsored the survey, which was administered by Abt Srbi Inc. A sampling strategy was designed to recruit households for survey participation that would best represent overall regional travel trends. Households were selected randomly, but with special consideration given to under-represented geographies and transit propensity. On their assigned travel day, households were asked to record all trips made within a 24-hour period. Additionally, select households were chosen to participate in a wearable global positioning system (GPS) technology-based component of the study. A total of 811 participants wore the GPS system.

1Hz data↗

2014 Southern Nevada Household Travel Survey

The 2014 Southern Nevada Household Travel Survey collected information from residents in the Las Vegas area to update the regional travel demand model and assess travel behavior. The Regional Transportation Commission of Southern Nevada contracted with Westat to conduct the survey. The survey was conducted in two phases—from March to May 2014 and from August to October 2014. Participants provided demographic and travel data (via a travel log). A 10% subsample (1,694 participants) was randomly selected to take part in a wearable global positioning system (GPS) technology-based component of the study, the purpose of which was to assess the level of trip under-reporting in the self-reported travel logs. Participants in the GPS portion of the study were instructed to record trips in their travel logs on the first day only, while passively recording their travel for three full days.

1Hz data↗

2001 Atlanta Household Travel Survey

The 2001 Atlanta Household Travel Survey collected demographic, socioeconomic, and travel information on work and non-work travel behavior for a 48-hour travel period. The study was conducted on behalf of the Atlanta Regional Commission, and it is an essential element in the transportation planning and modeling efforts for the 13-county Atlanta region. The main objective of the study was to produce data that could be used to develop and calibrate travel demand models for use in travel forecasting, land use planning, and air quality planning to improve the transportation system. The second component in the survey was the deployment of an electronic travel diary with person-based GPS and an accelerometer to collect health and activity information. Travel data includes trip generation, trip distribution, and modal choice. The survey recruited a total of 12,184 households to participate in the study. Of these, 8,069 households (66%) completed travel. The 8,069 households, when weighted, represent 21,323 persons, 14,449 vehicles, and 126,127 places visited from April 2001 through April 2002. This dataset is part of the Metropolitan Travel Survey Archive, which includes travel surveys from numerous public agencies across the United States and is archived by the Transportation Secure Data Center to ensure their continued public availability.

1Hz data↗

2002 Champaign-Urbana Urbanized Area Transportation Study

This travel survey, conducted by Champaign County Regional Planning Commission, collected daily weekday travel data from 395 urbanized-area households—accounting for every individual 12 years old or older—in the Champaign-Urbana-Savoy region. The information gathered from the survey was used to forecast future transportation demand and update the Champaign Urbana Urbanized Area Transportation Study Long Range Transportation Plan 2035. Of the 395 households recruited for the study, 362 completed their travel logs. The household travel survey was completed during the summer and fall of 2002, and it was the first large-scale attempt at collecting single-weekday travel data in Champaign, Urbana, and Savoy.

1Hz data↗

2008 NIRPC Household Travel Inventory

The Northwestern Indiana Regional Planning Commission (NIRPC) Household Travel Inventory, also sponsored by the Indiana Department of Transportation, is a comprehensive study of the demographic and travel of residents of Lake, Porter, and La Porte counties in northwest Indiana. The primary objective of the study was to provide data for the continued development and refinement of the Indiana regional travel demand forecast models. 3,838 households from northwest Indiana participated in the survey, which entailed the collection of activity and travel information for all household members regardless of age during a randomly assigned 24- or 48-hour period. NIRPC travel survey data provided the information required on base-year daily trips made by study area residents to the Chicago CBD. This travel market is treated separately because of the importance of transit for its travelers.

1Hz data↗

1988/1989 Maricopa Household Travel Study

This study was commissioned by the Maricopa Association of Governments (MAG) Transportation and Planning Office. The primary objectives of this study were to update the trip generation rates used in the MAG travel demand forecasting process and to provide data to validate the MAG trip distribution model. Demographic, socioeconomic, and travel data was collected for 2,992 households residing within the MAG Urban Planning Area. Respondents were asked to record their travel and activities for a 24-hour period. A total of 26,733 trips were recorded by 6,463 people.

1Hz data↗

2000 Bay Area Travel Survey

In 2000, the San Fransisco Bay Area Metropolitan Transportation Commission launched its fifth travel survey effort in the nine-county Bay Area. More than 15,000 households participated. The survey was an activity-based travel survey that collected information on all in-home and out-of-home activities over a two-day period, including weekday and weekend pursuits. Like the 1990 survey, the 2000 Bay Area Travel Survey also included an additional sample of 3,000 households using Bay Area Rapid Transit. Respondents were asked to report detailed information regarding their travel, including trip locations, mode of transportation, trip start and end times, trip purpose, and trip activities. Demographic variables include gender, age, employment status, occupation, income, education level, ethnicity, as well as whether a respondent held a valid driver's license, was a student, and had a disability.

1Hz data↗

2005 Washoe County Travel Characteristics Study

The primary objective of the 2005 Washoe County Travel Characteristics Study was to document travel behavior data characteristics of regional households in Washoe County, Nevada, in order to update the regional transportation model. The household travel survey, which was conducted from October through November, was one of several surveys conducted in the fall of 2005 for the Regional Transportation Commission (RTC) of Washoe County, with the other surveys focusing on documenting transit usage, visitor travel behavior, and external travel through the region. The data collected were drawn from 1,174 households within the RTC planning area and contain information about 2,679 household members, 2,138 vehicles, and 11,077 unlinked trips. The household travel survey entailed the collection of activity and travel information for all household members regardless of age during a specific 24-hour period. The survey relied on the willingness of regional households to 1) provide demographic information about their household, its members, and its vehicles and 2) have all household members record all travel and activity for a specific 24-hour period, including address information for all locations visited, trip purpose, mode, and travel times.

1Hz data↗