Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “characteristics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Cellulolytic enzyme-aided extraction of hemicellulose from switchgrass and its characteristics

The isolation of biomass components with their intact structure is integral for understanding the characteristics of biomass. Compared to other major biomass components such as cellulose and lignin, hemicellulose remains a challenging component to be isolated from the plant cell wall without significant depolymerization and modification. Here, a novel cellulolytic enzyme-aided hemicellulose (CEH) isolation method was developed to isolate hemicellulose with a near-native branched structure from switchgrass. The structural characteristics of CEH were investigated and compared with hemicelluloses isolated by conventional alkaline extracted hemicellulose (AEH) and DMSO extracted hemicellulose (DMSOH) methods. Gel permeation chromatography (GPC) analysis indicated that CEH had a weight-average molecular weight of 44 kDa, which was comparable to that of AEH (43 kDa) but higher than that of DMSOH (37 kDa). The chemical composition analysis revealed that CEH retained a higher proportion of glucuronic acid compared to AEH and DMSOH. The 2D 13 C– 1 H heteronuclear single quantum coherence (HSQC) NMR spectra containing the β-(1,4)-linked-D-xylan backbone, non-reducing-end peaks and both α- and β-reducing-end peaks in CEH were comparable to the spectra of the commercial beechwood xylan. CEH showed a highly branched hemicellulose structure, which retained methoxyl groups, O -acetyl groups, and 4- O -methyl-glucuronic acid attached to the xylan backbone.

59 BASIC BIOLOGICAL SCIENCES↗

Engineering of flat bands and Dirac bands in two-dimensional covalent organic frameworks (COFs): relationships among molecular orbital symmetry, lattice symmetry, and electronic-structure characteristics

Two-dimensional covalent organic frameworks (2D-COFs), also referred to as 2D polymer networks, display unusual electronic-structure characteristics, which can significantly enrich and broaden the fields of electronics and spintronics. In this Focus article, the objective of this report is to lay the groundwork for the conceptual description of the fundamental relationships among the COF electronic structures, the symmetries of their 2D lattices, and the frontier molecular orbitals (MOs) of their core and linker components. We focus on monolayers of hexagonal COFs and use tight-binding model analyses to highlight the critical role of the frontier-MO symmetry, in addition to lattice symmetry, in determining the nature of the electronic bands near the Fermi level. We rationalize the intriguing feature that, when the core unit has degenerate highest occupied MOs [or lowest unoccupied MOs], the COF highest valence band [or lowest conduction band] is flat but degenerate with a dispersive band at a high-symmetry point of the Brillouin zone; the consequences of having such band characteristics are briefly described. Multi-layer and bulk 2D COFs are found to maintain the salient features of the monolayer electronic structures albeit with a reduced bandgap due to the interlayer coupling. This Focus article is thus meant to provide an effective framework for the engineering of flat and Dirac bands in 2D polymer networks.

36 MATERIALS SCIENCE↗

Revealing the structure and electronic characteristics of Te-rich threshold switching materials for high-density integration

Ovonic threshold switching (OTS) selectors play an important role in the integration of advanced three-dimensional memory. Selectors based on tellurium (Te)-containing materials exhibit significant promise due to their low threshold voltages and superior consistency. Here we have theoretically studied the structure and electronic properties of a typical OTS material, amorphous GeTe 6 , to explore the switching mechanisms using ab initio molecular dynamics simulations. The results indicate that Ge atoms tend to bond with Te atoms, forming stable chemical bonds. The Te-centered clusters are predominantly in the form of distorted octahedrons, while the Ge-centered clusters are in the form of both octahedrons and tetrahedrons. Notably, the proportion of tetrahedrons within the 4-coordinated Ge-centered clusters reaches an impressive 66.9%. These tetrahedrons are randomly dispersed throughout the simulated cell, leading to a stable amorphous configuration. The mid-gap state observed in the mobility bandgap originates from the atomic chain composed of both over-coordinated Ge and Te atoms. It is the inherent stability of the chemical environment within amorphous GeTe 6 that enables it to maintain its amorphous phase under a repeated threshold voltage, a characteristic that distinguishes it from non-OTS materials, such as amorphous tellurium. Furthermore, our findings provide an in-depth understanding of the structure and electronic characteristics of amorphous GeTe 6 , which can promote the design and application of the Te-rich threshold switching materials.

36 MATERIALS SCIENCE↗

Exploring the Effects of Population and Employment Characteristics on Truck Flows: An Analysis of NextGen NHTS Origin-Destination Data

Truck transportation remains the dominant mode of US freight transportation because of its advantages, such as the flexibility of accessing pickup and drop-off points and faster delivery. Because of the massive freight volume transported by trucks, understanding the effects of population and employment characteristics on truck flows is critical for better transportation planning and investment decisions. The US Federal Highway Administration published a truck travel origin-destination data set as part of the Next Generation National Household Travel Survey program. This data set contains the total number of truck trips in 2020 within and between 583 predefined zones encompassing metropolitan and nonmetropolitan statistical areas within each state and Washington, DC. In this study, origin-destination-level truck trip flow data was augmented to include zone-level population and employment characteristics from the US Census Bureau. Census population and County Business Patterns data were included. The final data set was used to train a machine learning algorithm-based model, Extreme Gradient Boosting (XGBoost), where the target variable is the number of total truck trips. Shapley Additive ExPlanation (SHAP) was adopted to explain the model results. Results showed that the distance between the zones was the most important variable and had a nonlinear relationship with truck flows.

Uddin, Majbah↗

Moisture exposure to different layers in organic light-emitting diodes and the effect on electroluminescence characteristics

Moisture effect on electroluminescence characteristics, including current density versus voltage, luminance versus voltage, luminous efficiency versus current density, dark spot formation, and operational stability of organic light-emitting diodes, has been systematically investigated by exposing each layer of the devices to moisture at room temperature. Moisture has a different effect on each of the interfaces or surfaces, and the influence increases as exposure time increases. There is a slight effect on the electroluminescence characteristics after the anode surface has been exposed to moisture. However, severe luminance decrease, dark spot formation, and operational stability degradation take place after the light-emitting layer or the electron-transporting layer is exposed to moisture. It is also demonstrated that the effect of moisture can be substantially reduced if the exposure to moisture is in a dark environment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface reformation and electro-optical characteristics of liquid crystal alignment layers using ion beam irradiation

The surface modification characteristics of liquid crystal (LC) alignment layers irradiated with various argon (Ar) ion beam (IB) energies were investigated as a substitute for rubbing technology. Various pretilt angles were created on the IB-irradiated polyimide (PI) surfaces after IB irradiation, but the Ar ions did not alter the morphology on the PI surface, indicating that the pretilt angle was not due to microgrooves. The chemical bonding states of the IB-irradiated PI surfaces were analyzed in detail by x-ray photoelectron spectroscopy to verify the compositional behavior for the LC alignment. Chemical structure analysis showed that the alignment ability of LCs was due to the preferential reorientation of the carbon network due to the breaking of C=O double bonds in the imide ring parallel to the incident IB direction. The potential of applying nonrubbing technology to display devices was further supported by the superior electro-optical characteristics compared to rubbed PI.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparison of n-type and p-type GaAs oxide growth and its effects on frequency dispersion characteristics

The electrical characteristics of n- and p-type gallium arsenide (GaAs) capacitors show a striking difference in the ''accumulation'' capacitance frequency dispersion. This difference has been attributed by some to a variation in the oxide growth, possibly due to photoelectrochemical properties of the two substrates. We show that the oxide growth on n- and p-type GaAs substrates is identical when exposed to identical environmental and chemical conditions while still maintaining the diverse electrical characteristics. The difference in electron and hole trap time constants is suggested as the source of the disparity of the frequency dispersion for n-type versus p-type GaAs devices.

36 MATERIALS SCIENCE↗

Effect of electron temperature on dynamic characteristics of two-dimensional sheath in Hall thrusters

The Debye sheath has a significant effect on the performance of Hall thrusters. The dynamic characteristics of the two-dimensional sheath is investigated using the 2D-3V particle-in-cell method in this paper. The numerical results show that while the sheath exhibits the one-dimensional stability when the electron temperature is relatively low, it behaves as a two-dimensional (both in time and space) oscillating characteristic when the electron temperature is high. Moreover, it is found that the oscillating frequency is the same order as the electron plasma frequency and the spatial wavelength is equal to the length of the electrostatic wave.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Oxygen induced hysteretic current-voltage characteristics of iron-phthalocyanine thin films

Electrical transport has been investigated in amorphous and polycrystalline ({alpha}-phase) iron phthalocyanine (FePc) thin films grown by molecular beam epitaxy. Measurements carried out in the temperature range of 150-300 K showed hysteric current-voltage (I-V) characteristics at temperatures above 200 K. The I-V characteristics measured during the increasing voltage scan showed a transition from the Ohmic conduction to the trap controlled space charge limited conduction followed by a trap free conduction. During the decreasing voltage scan, trap free conduction was observed in full voltage range. The I-V hysteresis is attributed to the filling of deep surface traps created by chemisorbed oxygen. Amorphous films showed higher hysteresis as well as chemisorbed oxygen content.

36 MATERIALS SCIENCE↗

On the physical origin of the nozzle characteristic and its connection with the double-arcing phenomenon in a cutting torch

The nozzle current-voltage characteristic for a cutting arc is presented in this work. The measurements are reported using a high energy density cutting arc torch with a nozzle bore radius of 0.5 mm. The arc current was fixed at 30 A while the plenum pressure and the oxygen gas mass flow rate were varied in the range of 0.55-0.65 MPa and 0.32-0.54 g s{sup -1}, respectively. The results show a very low electron density and the lack of electron attachment at the plasma boundary layer. No ion saturation current was found. For the smallest mass flow rate value gas breakdown was found for a biasing nozzle potential close to that of the cathode, but no evidence of such breakdown was found for the larger mass flow rate values. Using an expression for the ion speed at the entry of the collisional sheath formed between the nonequilibrium plasma and the negatively biased nozzle wall together with a generalized Saha equation coupled to the ion branch of the characteristic, the radial profile of the electron temperature, the spatial distribution of the plasma density at the plasma boundary, and the sheath thickness were obtained. In particular, the obtained thickness value at the breakdown condition was in good agreement with that obtained from the oxygen Paschen's curve. An electron temperature of about 4700-5700 K and a corresponding plasma density of the order of 10{sup 19}-10{sup 20} m{sup -3} were found close to the nozzle wall. A physical interpretation on the origin of the double-arcing phenomenon is presented, that explains why the double-arcing (that it is established when the sheath breaks down) appears at low values of the gas mass flow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Particle-In-Cell Simulation on the Characteristics of a Receiving Antenna in Space Plasma Environment

We applied the electromagnetic Particle-In-Cell simulation to the analysis of receiving antenna characteristics in space plasma environment. In the analysis, we set up external waves in a simulation region and receive them with a numerical antenna model placed in the simulation region. Using this method, we evaluated the effective length of electric field antennas used for plasma wave investigations conducted by scientific spacecraft. We particularly focused on the effective length of an electric field instrument called MEFISTO for a future mission to Mercury: BepiColombo. We first confirmed that the effective length of the MEFISTO-type antenna is basically longer than that of a simple dipole antenna for both electrostatic and electromagnetic plasma waves. By applying the principle of a voltmeter, the effective length of the MEFISTO-type antenna is predicted to become identical to the separation between two sensor-conductor's midpoints. However, the numerical result revealed that the actual effective length becomes shorter than the prediction, which is caused by the shorting-out effect due to the presence of a center boom conductor between the two sensor conductors. Since the above effect is difficult to treat theoretically, the present numerical method is a powerful tool for further quantitative evaluation of the antenna characteristics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Period-two discharge characteristics in argon atmospheric dielectric-barrier discharges

Period multiplication and chaos behaviors in atmospheric glow discharges are important to understand atmospheric glow plasma stability and to optimize its applications. In this paper, we study the period-two discharge characteristics in argon atmospheric dielectric-barrier discharges using a one-dimension fluid model. Under certain conditions, period-two discharges can occur at different excitation frequencies and exhibit different current and voltage behaviors. When the discharge current becomes highly symmetrical the period-two discharge can reach to a steady state, which sustains over a broad frequency range. At the sufficiently high excitation frequency, the period-two discharge in atmospheric argon shows noticeably different behaviors from the discharges generated at kilohertz frequency. The spatial characteristics of period-two discharge as well as the influence of driving frequency on period-two discharge behaviors are also investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of activation by proton irradiation on silicon particle detector electric characteristics

After irradiation with 7 and 9 MeV protons, activation-induced effects were encountered in measurements of current-voltage (IV) and capacitance-voltage (CV) characteristics for Czochralski and float-zone grown silicon particle detectors prepared on printed circuit boards with copper electrodes. With the present detector construction, the {sup 30}Si(p,n){sup 30}P and {sup 63}Cu(p,n){sup 63}Zn reactions induce dominant interference in such measurements. The daughter nuclides are positron emitters with half-lives of 2.5 and 38.5 min, respectively, and the slowing down of the emitted positrons generates a significantly large concentration of electron-hole pairs in the detector volume increasing the leakage current level and decreasing the breakdown voltage. The observed time-dependent characteristics were verified by modeling the activation of the detector structure and the resulting leakage current. As a result, the electrical measurements cannot be performed immediately after irradiation due to silicon activation, and, generally, materials becoming easily activated should be avoided in the detector concept.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

ICRF Antenna Characteristics and Comparison with 3-D Code Calculation in the LHD

The plasma coupling characteristics and local heat spots of an ion cyclotron range of frequencies (ICRF) antenna in the Large Helical Device (LHD) are compared with the results of 3-D computing simulator code calculation. We studied several dependences of antenna loading resistances with plasma experimentally and observed a clear relation between the maximum injection power and the loading resistance. Realistic three-dimensional configuration of the ICRF antenna was taken into account to simulate the coupling characteristics and the local heat absorption near the ICRF antenna, which has a helically twisted geometry in the LHD. The electromagnetic field distribution and the current distribution on the antenna strap were calculated. We compared the RF absorption distribution on the antenna structure with the temperature rise during steady state operation and found that the temperature rise was well explained by comparing with the model simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement of Thermopower and Current-Voltage Characteristics of Molecular Junctions to Identify Orbital Alignment

We report an experimental technique that concurrently measures the Seebeck coefficient and the current-voltage (I-V) characteristics of a molecular junction to determine the identity and the effective energetic separation of the molecular orbital closest to the electrodes’ Fermi level. Junctions created by contacting a gold-coated atomic force microscope tip with a monolayer of molecules assembled on a gold substrate were found to have a Seebeck coefficient of (+16.9±1.4) μV/K. This positive value unambiguously shows that the highest occupied molecular orbital (HOMO) dominates charge transport. Further, by analyzing the (I-V) characteristics, the HOMO level is estimated to be ~ 0.69 eV with respect to the Fermi level.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of vacuum ultraviolet and ultraviolet Irradiation on capacitance-voltage characteristics of low-k-porous organosilicate dielectrics

High frequency capacitance-voltage (C-V) measurements are used to determine the effects of vacuum ultraviolet (VUV) and ultraviolet (UV) irradiation on defect states in porous low-k organosilicate (SiCOH) dielectrics. The characteristics show that VUV photons depopulate trapped electrons from defect states within the dielectric creating trapped positive charge. This is evidenced by a negative shift in the flat-band voltage of the C-V characteristic. UV irradiation reverses this effect by repopulating the defect states with electrons photoinjected from the silicon substrate. Thus, UV reduces the number of trapped positive charges in the dielectric and can effectively repair processing-induced damage.

36 MATERIALS SCIENCE↗

Etching characteristics of organic low-k films interpreted by internal parameters employing a combinatorial plasma process in an inductively coupled H{sub 2}/N{sub 2} plasma

The development of plasma etching technology is being held back due to the use of trial and error methods when scaling down and high integration. Such a continuous development could result in enormous losses in term of cost and time. It is impossible to overcome without a different approach. In this study, we have tried to accumulate a large amount of data on internal parameters and based on database, the etching characteristics could be interpreted with a high reproducibility. In order to realized faster data acquisitions, we developed a combinatorial plasma process (CPP) for obtaining a large amount of data in a single trial from spatially inhomogeneous plasma distribution regarding etching of organic low-k films in H{sub 2}/N{sub 2} plasmas. In addition, synergetic effects of other internal parameters such as vacuum ultraviolet radiation and radicals without ion bombardment were clarified. Finally, the high performance of CPP for faster data acquisitions was shown and the etching characteristics in terms of internal parameters such as ion fluxes and the H/(H+N) radical flux ratio were demonstrated.

36 MATERIALS SCIENCE↗

Interface characteristics of n-n and p-n Ge/SiC heterojunction diodes formed by molecular beam epitaxy deposition

In this article, we report on the physical and electrical nature of Ge/SiC heterojunction layers that have been formed by molecular beam epitaxy (MBE) deposition. Using x-ray diffraction, atomic force microscopy, and helium ion microscopy, we perform a thorough analysis of how MBE growth conditions affect the Ge layers. We observe the layers developing from independent islands at thicknesses of 100 nm to flat surfaces at 300 nm. The crystallinity and surface quality of the layer is shown to be affected by the deposition parameters and, using a high temperature deposition and a light dopant species, the layers produced have large polycrystals and hence a low resistance. The p-type and n-type layers, 300 nm thick are formed into Ge/SiC heterojunction mesa diodes and these are characterized electrically. The polycrystalline diodes display near ideal diode characteristics (n<1.05), low on resistance and good reverse characteristics. Current-voltage (I-V) measurements at varying temperature prove that all the layers have two-dimensional fluctuations in the Schottky barrier height (SBH) due to inhomogeneities at the heterojunction interface. Capacitance-voltage analysis and the SBH size extracted from I-V analysis suggest strongly that interface states are present at the surface causing Fermi-level pinning throughout the bands. A simple model is used to quantify the concentration of interface states at the surface.

36 MATERIALS SCIENCE↗