Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “catalyst utilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Suppressing CO formation in low-temperature methanol steam reforming via Ce-modified CuZnGa layered oxide catalysts

Cu-based layered double hydroxides (LDHs) are widely recognized as effective catalysts for low-temperature methanol steam reforming, yet achieving high hydrogen productivity together with near-complete suppression of CO formation remains challenging. Here, we report the synthesis and evaluation of a series of CuZnGa LDH-derived catalysts and Ce-modified analogues prepared via an aqueous miscible organic method, which enables high metal dispersion and precise structural control. The optimized CuZnGa catalyst exhibits a hydrogen production rate of 16.9 µmol H 2 ·g cat −1 ·s −1 at 180 °C with an H 2 /CO ratio exceeding 3500, outperforming many state-of-the-art low-temperature systems. Importantly, the incorporation of small amounts of Ce further suppresses CO formation while maintaining high hydrogen productivity. Combined spectroscopic characterization and density functional theory calculations reveal that Ce is incorporated into the LDH lattice by substituting Ga 3+ sites up to a critical threshold, beyond which highly dispersed CeO x species are formed. These species provide mobile lattice oxygen that participates in a Mars-van Krevelen-type pathway, selectively oxidizing CO and suppressing the reverse water-gas shift reaction. This study establishes a clear relationship between Ce speciation, oxygen mobility, and catalytic selectivity in LDH-derived systems. The resulting catalysts demonstrate the potential of interface-engineered Cu-based materials for efficient low-temperature hydrogen production with minimal CO contamination.

09 BIOMASS FUELS↗
DOE OSTI2022

Triplet Photosensitized para -Hydrogen Induced Polarization

Despite its enormous utility in structural characterization, nuclear magnetic resonance (NMR) spectroscopy is inherently limited by low spin polarization. One method to address the low polarization is para-hydrogen (p-H 2 ) induced polarization (PHIP) which uses the singlet spin isomer of H 2 to generate disparate nuclear spin populations to amplify the associated NMR signals. PHIP often relies on thermal catalysis or, more infrequently, UV-activated catalytic hydrogenation. Light-activated hydrogenation enables direct and timed control over the hyperpolarization of target substrates, critical for identifying short-lived intermediates. Here, we use an established Ir(III) triplet photosensitizer (PS) to visible light sensitize the triplet ligand-field states in the d6-transition metal dihydride Ru(CO)(PPh 3 ) 3 (H) 2 (1). Excitation inside a 9.4 T NMR spectrometer with the PS and a 420 nm blue LED, under 3 atm of p-H 2 , successfully photosensitized hyperpolarization in 1 and in a range of unsaturated substrates at and below room temperature, up to 1630-fold. In otherwise identical experimental conditions without light activation, no polarization was realized in 1 or the substrates evaluated. We believe triplet-sensitized PHIP (Trip- PHIP) represents a facile experimental means for probing triplet sensitized light activation in transition metal catalysts possessing low-lying triplet ligand-field states, providing mechanistic insight of potentially tremendous value in chemical catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Revealing protonation states and tracking substrate in serine hydroxymethyltransferase with room-temperature X-ray and neutron crystallography

Pyridoxal 5’-phosphate (PLP)-dependent enzymes utilize a vitamin B 6 -derived cofactor to perform a myriad of chemical transformations on amino acids and other small molecules. Some PLP-dependent enzymes, such as serine hydroxymethyltransferase (SHMT), are promising drug targets for the design of small-molecule antimicrobials and anticancer therapeutics, while others have been used to synthesize pharmaceutical building blocks. Understanding PLP-dependent catalysis and the reaction specificity is crucial to advance structure-assisted drug design and enzyme engineering. Here we report the direct determination of the protonation states in the active site of Thermus thermophilus SHMT (TthSHMT) in the internal aldimine state using room-temperature joint X-ray/neutron crystallography. Conserved active site architecture of the model enzyme TthSHMT and of human mitochondrial SHMT (hSHMT2) were compared by obtaining a room-temperature X-ray structure of hSHMT2, suggesting identical protonation states in the human enzyme. The amino acid substrate serine pathway through the TthSHMT active site cavity was tracked, revealing the peripheral and cationic binding sites that correspond to the pre-Michaelis and pseudo-Michaelis complexes, respectively. At the peripheral binding site, the substrate is bound in the zwitterionic form. By analyzing the observed protonation states, Glu53, but not His residues, is proposed as the general base catalyst, orchestrating the retro-aldol transformation of L-serine into glycine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A novel solid oxide electrolytic cell with reduced endothermic load for CO 2 electrolysis using (La 0.80 Sr 0.20 ) 0.95 MnO 3-δ cathode

CO 2 conversion to CO via solid oxide electrolysis provides a potentially efficient method for converting CO 2 into an industrially relevant product. A solid oxide electrolysis cell with (La 0.80 Sr 0.20 ) 0.95 MnO 3-δ (LSM) as the CO 2 reduction cathode, yttrium stabilized zirconia (YSZ) as electrolyte, and nickel as the H 2 oxidation anode was operated 800 °C and 850 °C. Thermogravimetric analysis of the LSM material showed no catalyst oxidation at operating temperatures allowing for CO 2 electrolysis without reducing safe gas. In addition, no cathode material mass gain was observed in the presence of CO suggesting little to no carbon deposition occurred above 750 °C. The formation rates of CO for the cell reached 1.15 mL∙min-1∙ cm -2 for an applied current of 150 mA∙cm -2 achieving a faradaic efficiency of 100 %. Furthermore, the cell displayed good stability in the short-term CO 2 electrolysis test with a nominal voltage drop of 4 mV h -1 for 10 h at 850°C. This study shows the feasibility of operating a solid oxide CO 2 electrolysis cell for CO production with H 2 at the anode to reduce endothermic process load.

(La0.80Sr0.20)0.95MnO3-δ↗
DOE OSTI2021

Graphitized Biocarbon Derived from Hydrothermally Liquefied Low-Ash Corn Stover

Graphitized biocarbon can be utilized for energy storage applications such as supercapacitors. The scientific community have geared their attention to obtain such value-added product from abundantly available and low-cost biomass feedstock agricultural residues such as corn stover. Lignocellulosic components embedded within the cell wall of biomass substrates can provide a fine template for enhanced ion storage, transport, and rate capabilities, desirable for electrochemical storage. Presented is the utilization of homogenized low ash content corn stover milled and sieved to desired specifications, which underwent hydrothermal liquefaction in the presence of Ni-based catalytic salts at 275 o C. The hydrochar obtained by solid residue extracted from the reaction slurry was washed to acid neutral and subjected to catalytic activation using ZnCl 2 , followed by thermal annealing at 400 o C for morphological and pore size enhancement of the resulting biochar. Carbonization was performed on acid neutralized hydrochar at 850 °C to further enhance pore structures and increase graphitization for improved conductivity. Catalytic materials exhibited a specific capacitance of 316 F g -1 and held a 100% retention beyond 10,000 cycles. BET, Raman, XRD, cyclic voltammetry, chronopotentiometry, and EIS are discussed herein.

Biomass↗
DOE OSTI2022

Solar reduction of carbon dioxide on copper-tin electrocatalysts with energy conversion efficiency near 20%

Abstract Copper catalysts modified with tin have been demonstrated to be selective for the electroreduction of carbon dioxide to carbon monoxide. However, such catalysts require the precise control of tin loading amount. Here, we develop a copper/tin-oxide catalyst with dominant tin oxide surface being formed via a spontaneous exchange reaction between sputtered tin and copper oxide. Even though the surface of this catalyst is tin-rich, it achieves an excellent performance towards carbon monoxide production in a flow cell. This contrasts with copper/tin-oxide prepared via atomic layer deposition since it yields selectivity towards carbon monoxide only on a copper-rich surface. Mechanism studies reveal that the tin sites on the tin-rich copper/tin-oxide surface achieve a suitable binding with adsorbed carbon monoxide under the presence of copper. Powered by a triple-junction solar cell, the copper/tin-oxide based electrolyzer sets a new benchmark solar-to-chemical energy conversion efficiency of 19.9 percent with a Faradaic efficiency of 98.9 percent towards carbon monoxide under simulated standard air mass 1.5 global illumination.

14 SOLAR ENERGY↗
DOE OSTI2023

Direct Evidence for Excited Ligand Field State-based Oxidative Photoredox Chemistry of a Cobalt(III) Polypyridyl Photosensitizer

Increasing interest in sustainable chemistry coupled with the quest to explore new reactivity has spurred research on first-row transition metal complexes for potential applications in a variety of settings. One of the more active areas of research is photoredox catalysis, where the synthetically tunable nature of their electronic structures provides a rich palette of options for tailoring their reactivity to a desired chemical transformation. Understanding the mechanism of excited-state reactivity is critical for the informed development of next-generation catalysts, which in turn requires information concerning the propensity of their electronic excited states to engage in the desired electron or energy transfer processes. Herein we provide direct evidence of the highly oxidizing nature of the lowest-energy ligand-field (LF) excited state of a first-row d 6 -low-spin Co(III) photosensitizer [Co(4,4'-Br 2 bpy) 3 ] 3+ (where 4,4'-Br 2 bpy is 4,4'-dibromo-2,2'-bipyridine). The redox potential associated with the LF excited state of the Co(III) complex was bracketed by performing bimolecular quenching studies by using a series of simple organic electron donors. Time-resolved absorption spectroscopy confirmed a dynamic quenching process attributed to reductive quenching of the lowest-energy ligand-field excited state of the Co(III) chromophore. Analysis of the Stern–Volmer plots for each chromophore-quencher pair revealed a limiting value of E red * ~ 1.25 V vs Fc/Fc + for the metal-centered excited state, which is significantly stronger than that of more commonly employed transition metal-based photoredox agents such as [Ru(bpy) 3 ] 2+ (E red * = 0.32 V vs Fc/Fc + ) and [Ir(ppy) 2 (bpy)] + (E red * = 0.27 V vs Fc/Fc + ). Finally, these results suggest that this class of chromophores could find utility in applications requiring the activation of oxidatively resistant organic substrates for photoredox catalysis.

14 SOLAR ENERGY↗
DOE OSTI2024

Co-Hydrotreatment of Pyrolytic Lignin and Waste Cooking Oil to Produce Hydrocarbons

The co-hydrotreatment of pyrolysis bio-oils and vegetable oils could facilitate the integration of bioderived fuels into existing fuel infrastructures without significant modifications. Co-hydrotreatment studies with different PL/WCO blend ratios (0, 10, 20, 30, and 40 wt %) were conducted over the NiMo/γ-Al 2 O 3 catalyst. The coke formation value for WCO was 0.7 wt % and ranged between 1.5 and 2.5 wt % with the increase of pyrolytic lignin in the blend. The data suggest that coke is formed from both the sugar- and lignin-derived oligomers since the coke yield reported in this study is comparable with the coke yield obtained by coprocessing the bio-oil fraction without light oxygenate compounds, based on previous studies. All blends are recommended for co-hydrotreatment based on coke yield. The resulting organic phase was distilled into hydrocarbons at <150 °C, 150 to 250 °C, and 250 to 350 °C. The organic product’s overall hydrocarbon distribution was strongly dependent on the pyrolytic lignin concentration. The yield of the distillation cut with a boiling point range between 250 and 350 °C was higher in the hydrotreated samples, with more than 20% during distillation. Two-dimensional GC×GC was used to determine carbon distribution on the combustibles. FTIR and UV fluorescence spectra showed that most feedstocks were converted to potential combustibles for transportation applications after hydrotreatment. The distillation cuts properties, such as density, viscosity, and surface tension, were reported and compared to transportation fuel properties. Hydrocarbon yields reveal the potential of cohydrotreatment to upgrade pyrolytic lignin into valuable products. Furthermore, these findings provide useful insights into utilizing pyrolytic lignin to produce promising combustibles suitable for transportation applications.

co-hydrotreatment↗
DOE OSTI2024

Mono-Ether and Alcohol Bioblendstocks to Reduce the Fuel Penalty of Mixing Controlled Compression Ignition (MCCI) Engine Aftertreatment

An integrated approach utilizing catalysis experiments, process systems engineering, fuel property modeling, and engine testing was utilized in this project to optimize the production process and composition of a #2 diesel bioblendstock produced from ethanol consisting primarily of long-chain mono-ethers. The primary objective of the project was to determine the composition and to design the production process for a bioblendstock for #2 diesel fuel with > 50% reduction in greenhouse gas emissions relative to conventional diesel fuel. The desired bioblendstock needed to be blendable with #2 diesel fuel at > 5 vol. % while still meeting ASTM D975 diesel fuel specification properties and achieving improvements in fuel properties: increased cetane number, decreased sooting, and reduced pour point and cloud point temperatures. At the same time, it needed to reduce the fuel energy penalty associated with MCCI engine aftertreatment resulting in improved system efficiency. The findings of the current project demonstrate that primary objective of the work has been met, i.e., to determine the composition and to design the production process for a bioblendstock for #2 diesel fuel with > 50% reduction in greenhouse gas emissions relative to conventional diesel fuel. Additionally, the results indicate that the property objectives (increased cetane number, reduced pour and cloud points, and reduced sooting propensity) for the designed bioblendstock composition have also been met. Engine testing performed has also confirmed that the increased reactivity of the bioblendstock can be used to improve catalyst heating operation and to reduce the fuel penalty associated with this operation mode. The fuel property results demonstrate that >5 vol.% blending is easily achieved while meeting the ASTM D975 #2 diesel fuel property specifications tested in this work, as this was achieved for a blend with 43 vol. % of the bioblendstock. The results provide a foundation for future work to scaleup the catalytic production process designed in this work, with many of the challenges and areas for improvement being identified in this work to enable economic production with low GHG lifecycle emissions.

09 BIOMASS FUELS↗
DOE OSTI2025

Machine Learning-Guided Optimization of SABRE Hyperpolarization for α-Ketoglutarate in Acetone–Water

Signal amplification by reversible exchange (SABRE) is a hyperpolarization method that polarizes target nuclei of metabolites quickly and efficiently. Recent SABRE advances, including Ace-SABRE, yield biocompatible, aqueous solutions of hyperpolarized markers for metabolic monitoring. Building on recent advancements, expanding the substrate scope of Ace-SABRE is desirable. However, SABRE polarization is sensitive to many different parameters; therefore, traditional optimization approaches are experimentally time-consuming. In this proof-of-concept application of machine learning (ML), Bayesian optimization (BO) is used for four important input parameters to model the complex SABRE dynamics while saving experimental time. The presented ML model also provides chemical insights that enable predictions of sample compositions for increased polarization levels. In this paper, we transition from an original average free polarization of p = ∼0.90% to a maximum observed free polarization of p = ∼6.6% for 1- 13 C alpha-ketoglutarate (AKG) with 13 C at natural abundance, utilizing both direct outputs as well as chemical insights revealed by the ML model.

Catalysts↗
DOE OSTI2025

Identification and evolution of active sites in isomorphously substituted Fe-ZSM-5 catalysts for methane dehydroaromatization (MDA)

Methane dehydroaromatization (MDA) enables the catalytic conversion of methane into aromatics, mainly benzene, along with hydrogen, in a single-step process under non-oxidative conditions. In this study, we prepared a series of isomorphously substituted Fe-ZSM-5 catalysts with exclusively isolated or low-oligomerized sites up to 3.2% Fe weight loading by adding ethylenediaminetetraacetic acid (EDTA) to the crystallization gel. These catalysts exhibit no induction/activation period and a significantly higher maximum product yield compared to Fe/ZSM-5 catalysts prepared by the incipient wetness impregnation method and containing extensively aggregated FeOx. This investigation focuses on the evolution of Fe sites during the post-synthetic treatments. Most importantly, we demonstrate the quantitative relation between Fe site isolation and catalytic activity, proving that isolated or low-oligomerized Fe species at the exchange sites formed during post-synthetic retreatment are the active sites for methane activation.

02 PETROLEUM↗
DOE OSTI2022

Valorizing the carbon byproduct of methane pyrolysis in batteries

While low-cost natural gas remains abundant, the energy content of this fuel can be utilized without greenhouse gas emissions through the production of molecular hydrogen and solid carbon via methane pyrolysis. In the absence of a carbon tax, methane pyrolysis is not economically competitive with current hydrogen production methods unless the carbon byproducts can be valorized. In this work, we assess the viability of the carbon byproduct produced from methane pyrolysis in molten salts as high-value-added anode or conductive additive for secondary Li-ion and Na-ion batteries. Raman characterization and electrochemical differential capacity analysis demonstrate that the use of molten salt mixtures with catalytically-active FeCl 3 - or MnCl 2 result in more graphitic carbon co-products. These graphitic carbons exhibit the best electrochemical performance (up to 272 mAh/g of reversible capacity) when used as Li-ion anodes. For all carbon samples studied here, disordered carbon domains and retained salt species trapped and/or intercalated into the carbon structure were identified by X-ray photoelectron and multinuclear solid-state nuclear magnetic resonance spectroscopy. The latter lead to reduced electrochemical activity and reversibility, and poorer rate performance compared to commercial carbon anodes. The electronic conductivity of the pyrolyzed carbons is found to be highly dependent on their purity, with the purest carbon exhibiting an electronic conductivity nearly on par with that of commercial carbon additives. These findings suggest that more effective removal of the salt catalyst could enable applications of these carbons in secondary batteries, providing a financial incentive for the large-scale implementation of methane pyrolysis for “low-carbon” hydrogen production.

08 HYDROGEN↗
DOE OSTI2022

Variable hydrazine coordination modes from reactions with dichlorotris(triphenylphosphine)ruthenium(II)

The reactivity of the prominent ruthenium(II) catalyst and precursor, RuCl 2 (PPh 3 ) 3 , was explored with hydrazine and its derivatives. The reactions produced 6-coordinate ruthenium(II) products that bond with the hydrazine moiety in bridging (NH 2 NH 2 or NH 2 NHMe), end-on (NH 2 NHMe, NH 2 NHPh, or NH 2 NMe 2 ), or side-on (NH 2 NMe 2 ) fashions. The products have been characterized by single crystal X-ray diffraction and 31 P NMR spectroscopy. With NH 2 NH 2 , the dimeric product, [RuCl 2 (PPh 3 ) 2 ] 2 ($μ$-N 2 H 4 ) 2 , was formed under all conditions used. For other hydrazines, the reaction stoichiometry governed product formation to yield either bimetallic or monomeric products. When the RuCl 2 (PPh 3 ) 3 to hydrazine derivative ratio was 1:1 or lower, bimetallic complexes were formed while a 1:2 ratio produced monomeric compounds. The exception to the latter occurs with the production of the monomeric compound, RuCl 2 (PPh 3 ) 2 ($η$ 2 -NH 2 NMe 2 ), that forms employing a 1:1 ratio. In addition to stoichiometry, steric factors and hydrogen bonding played a significant role in dictating the bonding mode of hydrazines. The bimetallic complexes were further reacted to yield the corresponding monomeric products, adopting the form RuCl 2 (PPh 3 ) 2 (L) 2 (L = NH 2 NHMe, NH 2 NHPh, or NH 2 NMe 2 ). Reactions utilizing less than a 1:2 ratio of RuCl 2 (PPh 3 ) 3 to NH 2 NMe 2 produced a mixture of products that appear to be in equilibrium. In conclusion, FT calculations were performed to gain insight into the reaction energetics and molecular stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A mathematical analysis of carbon fixing materials that grow, reinforce, and self-heal from atmospheric carbon dioxide

Carbon fixing materials are a new class of self-healing, self-reinforcing materials we have introduced that utilize ambient CO 2 to chemically add to an ever extending carbon backbone. This class of materials can utilize biological or non-biological photocatalysts and support a wide range of potential backbone chemistries. However, there is no analysis to date that describes their fundamental limits in terms of chemical kinetics and mass transfer. In this computational study, we employ a reaction engineering, and materials science analysis to answer basic questions about the maximum growth rate, photocatalytic requirements and limits of applicable materials. Our proposed mathematical framework envelops three main functions required for carbon fixing materials: (1) adsorption of CO 2 from air, (2) photocatalytic reduction of CO 2 into selected monomers, and (3) polymerization of CO 2 -derived monomers. First, by performing a Damköhler number analysis, we derive criteria for the cross over from kinetic control to mass transfer limited growth, setting upper limits on performance of a potential photocatalyst. Next, we analyze photocatalytic reduction of CO 2 to single carbon products, using known catalytic pathways and kinetic data. We identify formaldehyde as a C1 intermediate having unique potential for incorporation into the material backbone of carbon fixing materials. As an example, we find that a diamond-shaped reaction network graph for CO 2 reduction, passing through CO and HCOOH intermediates, accurately describes kinetic data for cobalt-promoted TiO 2 nanoparticles at room temperature and 1 atm CO 2 . Finally, as an applied case study, we consider and analyze the example of a carbon fixing poly(oxymethylene) system with embedded catalyst promoting the photocatalytic reduction of CO 2 to formaldehyde. The latter then trimerizes to a trioxane monomer which subsequently polymerizes to polyoxymethylene. This reaction engineering analysis introduces benchmarks for carbon fixing materials with respect to achievable rates of photocatalysis, adsorption, and polymerization. These results should prove valuable for the design, evaluation, and benchmarking of this emergent and new class of environmentally sustainable materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

PCET-Based Ligand Limits Charge Recombination with an Ir(III) Photoredox Catalyst

Upon photoinitiated electron transfer, charge recombination limits the quantum yield of photoredox reactions for which the rates for the forward reaction and back electron transfer are competitive. Taking inspiration from a proton-coupled electron transfer (PCET) process in Photosystem II, here a benzimidazole-phenol (BIP) has been covalently attached to the 2,2'-bipyridyl ligand of [Ir(dF(CF 3 )ppy) 2 (bpy)][PF 6 ] (dF(CF 3 )ppy = 2-(2,4-difluorophenyl)-5-(trifluoromethyl)pyridine; bpy = 2,2'-bipyridyl). Excitation of the [Ir(dF(CF 3 )ppy) 2 (BIP-bpy)][PF 6 ] photocatalyst results in intramolecular PCET to form a charge-separated state with oxidized BIP. Subsequent reduction of methyl viologen dication (MV 2+ ), a substrate surrogate, by the reducing moiety of the charge separated species demonstrates that the inclusion of BIP significantly slows the charge recombination rate. The effect of ~24-fold slower charge recombination in a photocatalytic phthalimide ester reduction resulted in a greater than 2-fold increase in reaction quantum efficiency.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Engineering bimetallic interfaces and revealing the mechanism for carbon dioxide electroreduction to C 3+ liquid chemicals

Reduction reaction of CO 2 (CO 2 RR) to liquid C 3+ chemicals is a net-zero-carbon process and can increase local resiliency to power outages and fuel consumption. The mechanism and the catalyst design rules of CO 2 RR-to-C 3+ are unknown. Engineering bimetallic interface (e.g., Pd/Au) to tune the intermediate adsorption is promising for promoting C 3+ formation. Our density functional theory (DFT) calculations find that *CH 2 could be the key intermediate and C 1 -CH 2 coupling could be the rate-limiting step to generate C 3+ . High CO surface coverages can promote the bimetallic interfacial sites, lower the energetics of the C 1 -CH 2 coupling step, and enhance the C 3+ formation. We further construct a volcano plot of C 1 -CH 2 kinetics as a function of the binding strength of key intermediate *CH 2 via engineering the d-band center of the interfacial site. Our findings could guide the rational design of bimetallic interfaces and their near-surface microenvironment for enhancing CO 2 RR-to-C 3+ .

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Heterointercalation in Chevrel-Phase Sulfides: A Model Periodic Solid for the Investigation of Chain Electron Transfer

Modulation of electron density localization on periodic crystal solids through electron transfer from interstitial cations can directly influence the bonding configurations of small-molecule intermediates at the catalyst binding site. This study presents the microwave-assisted solid-state synthesis of four heterointercalant Chevrel-phase (CP) sulfides with varying metal cation intercalants with compositional and electronic structure investigations of the electron density redistribution as a result of intercalation. The heterointercalant CP sulfides, with the general formula Cu x M y Mo 6 S 8 (where M = Cr, Mn, Fe, Ni; x, y = 1.5−2.5), are presented here for the probe reaction of electrochemical CO 2 reduction. A change in product selectivity is observed toward the production of methanol at low overpotentials of −0.5 V vs reversible hydrogen electrode (RHE), as a result of the intercalant combination present within the CP interstitial cavity. Structural confirmation of all materials was examined through Rietveld refinement of the powder X-ray diffraction (PXRD) data, high-resolution transmission electron microscopy (HR-TEM), and selected-area electron diffraction (SAED). Electron transfer from the intercalated metal cations to the Mo 6 S 8 cluster was investigated via X-ray photoelectron spectroscopy (XPS) of the intercalated metal cations and the chalcogenide cluster. Electron transfer was further confirmed through X-ray absorption analysis (XAS) of the K-edges of Mo and intercalants. Intermediate studies of electrochemical reduction of formaldehyde to methanol resulted in a faradaic efficiency of ∼78% methanol production on Cu x Ni y Mo 6 S 8 . The results presented herein identify distinct principles for materials design that can be utilized in other compositional spaces within the broad families of periodic crystal solids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Renewable Ammonia as An Energy Fuel for Ocean Exploration and Transportation

Renewable power generated from wave energy has faced technological and cost barriers to entry into utility-scale electricity markets. As an alternative, the production of chemical fuels, such as ammonia (NH3) which has high energy density (11.5 MJ/L) and facile storage properties, may open wave energy to new markets including ocean exploration and transportation. The electrochemical method has been studied to synthesize NH3 from air and water at ambient conditions. Based on some recent work on the electrochemical synthesis of NH3, it is possible to achieve an overall conversion efficiency of 10% from wave energy to NH3 through an electrochemical reaction between air and water. If all the recoverable wave energy in the United States (1170 TWh/yr) is used to produce renewable NH3 fuel replacing hydrocarbon fuels, this can help reduce over 300 million tons of CO2 emission every year. Several potential application scenarios at sea have been proposed for renewable NH3 fuel including production and storage for marine shipping and seasonal energy storage for Arctic exploration. Liquefied NH3 has much higher energy density, both gravimetric and volumetric, than a variety of batteries but the energy efficiency of NH3 is lower than modern batteries such as Li-ion. The Levelized cost of storing NH3 prepared using electric energy is less than $0.2/kWh and the storage time can exceed 10,000 hours which indicates that NH3 can be a promising energy storage solution to make use of abundant wave energy. However, there are some safety and environmental concerns involved in the usage of NH3 at sea. The challenges in the electrochemical catalyst for the NH3 synthesis and how molecular simulation may help to screen electrocatalyst with high efficiency and selectivity were also briefly discussed.

Liu, Jian↗