Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atomic ordering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Defect Structure of Beta NiAl Using the BFS Method for Alloys

The semiempirical BFS method for alloys is generalized by replacing experimental input with first-principles results thus allowing for the study of complex systems. In order to examine trends and behavior of a system in the vicinity of a given point of the phase diagram a search procedure based on a sampling of selected configurations is employed. This new approach is applied to the study of the beta phase of the Ni-Al system, which exists over a range of composition from 45-60 at.% Ni. This methodology results in a straightforward and economical way of reproducing and understanding the basic features of this system. At the stoichiometric composition, NiAl should exist in a perfectly ordered B2 structure. Ni-rich alloys are characterized by antisite point defects (with Ni atoms in the Al sites) with a decrease in lattice parameters. On the Al-rich side of stoichiometry there is a steep decrease in lattice parameter and density with increasing Al content. The presence of vacancies in Ni sites would explain such behavior. Recent X-ray diffraction experiments suggest a richer structure: the evidence, while strongly favoring the presence of vacancies in Ni sites, also suggests the possibility of some vacancies in Al sites in a 3:1 ratio. Moreover, local ordering of vacant sites may be preferred over a random distribution of individual point defects.

Bozzolo, Guillermo↗
DOE OSTI2021

Study of the crystal structure of SnS thin films by atomic layer deposition

Tin monosulfide, SnS, absorbs visible light and holds promise for thin-film photovoltaics. However, the optoelectronic properties of this material vary among the different structural phases, and control over the phase of vapor deposited SnS thin films is not well understood. In order to study the phases and crystallographic orientations of SnS films, films with thicknesses of 90 nm–750nm were prepared by atomic layer deposition (ALD) at temperatures between 80 °C and 200 °C on amorphous silicon dioxide (a-SiO2) and single-crystal sodium chloride (NaCl). We show that the crystal structures and orientations of the ALD-SnS thin films vary with deposition temperature, film thickness, and substrate. We confirm the presence of metastable cubic π-SnS in co-existence with the thermodynamically stable orthorhombic α-SnS and find that the π phase is more prevalent at lower deposition temperatures. The films grown on a-SiO2 are textured, the degree of texturing increases with lower temperature or higher thickness, and the deposited phase is also thickness dependent. Upon annealing, which is known to promote SnS grain growth, all films revert to orthorhombic α-SnS. The films grown on the NaCl(100) substrate exhibit a much higher degree of texturing and show different preferred orientations dependent on the phase: π-(400) and α-(111) or α-(040). In addition, we demonstrate a proof-of-concept device made from the highly oriented SnS grown on NaCl.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Characterizing the surface compositions of supported bimetallic PtSn clusters: Effects of cluster-support interactions and surface adsorbates

PtSn bimetallic clusters on TiO2(110) and highly oriented pyrolytic graphite (HOPG) surfaces have been characterized by scanning tunneling microscopy, low energy ion scattering (LEIS), Xray photoelectron spectroscopy, and temperature programmed desorption (TPD); density functional theory (DFT) calculations have also been performed to better understand adsorption of CO and D2 on the PtSn surfaces. On TiO2 at coverages of 2 ML of Pt and 2 ML of Sn, exclusively bimetallic clusters are formed for both orders of deposition because clusters of the first metal completely cover the surface such that all atoms of the second metal are incorporated into the existing clusters. In contrast, on HOPG, the high mobility and weak cluster-support interactions on HOPG result in much larger 2 ML monometallic clusters (~30 Å high) that do not completely cover the surface, and deposition of the second metal produces larger clusters as well as smaller ones. Despite the difference in cluster morphologies for the different orders of deposition and supports, the LEIS experiments demonstrate that in all cases, the PtSn clusters are rich in Sn at the surface, as expected based on the lower surface free energy for Sn compared to Pt. Furthermore, the +0.2 eV shift in the Sn(3d5/2) binding energy observed on all surfaces in the presence of Pt is consistent with PtSn alloy formation. Deposition of 2 ML of Sn on TiO2 produces two-dimensional clusters with oxidation of Sn and reduction of titania at the clustersupport interface, but addition of Pt to the Sn clusters causes Sn to diffuse away from this interface, leaving Sn in the metallic state. TPD experiments on 2 ML Pt/TiO2 with increasing coverages of Sn show that the number of adsorption sites for D2 sharply decreases to nearly zero at 0.5 ML, while CO adsorption decreases to zero only at much higher Sn coverages of 2 ML. DFT studies for Sn modified Pt surfaces and bulk structures demonstrate that for CO adsorption at low Sn coverages (<0.25 ML), the strong Pt-CO interactions induce diffusion of Pt to the cluster surface and the formation of a bulk Pt3Sn alloy, whereas D2 adsorption does not lead to interactions with the Pt surface that are strong enough to induce alloy formation. A single Sn adatom prevents D2 adsorption on four neighboring Pt atoms via site-blocking and the donation of electron density to Pt.

Li, Fangliang↗
DOE OSTI2023

Decoherence from long-range forces in atom interferometry

Atom interferometers provide a powerful means of realizing quantum coherent systems with increasingly macroscopic extent in space and time. These systems provide an opportunity for a variety of novel tests of fundamental physics, including ultralight dark matter searches and tests of modifications of gravity, using long drop times and microgravity environments. However, as experiments operate with longer periods of free fall and become sensitive to smaller background effects, key questions start to emerge about the fundamental limits to future atom interferometry experiments. Here we study the effects on atomic coherence from hard-to-screen backgrounds due to baths of ambient particles with long-range forces, such as gravitating baths and charged cosmic rays. Our approach—working in the Heisenberg picture for the atomic motion—makes proper inclusion of the experimental apparatus feasible and clearly shows how to handle long-range forces. We find that these potential backgrounds are likely negligible for the next generation of interferometers, as aggressive estimates for the gravitational decoherence from a background bath of dark matter particles gives a decoherence timescale on the order of years.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Bulk and boundary quantum phase transitions in a square Rydberg atom array

Motivated by recent experimental realizations of exotic phases of matter on programmable quantum simulators, we carry out a comprehensive theoretical study of quantum phase transitions in a Rydberg atom array on a square lattice, with both open and periodic boundary conditions. In the bulk, we identify several first-order and continuous phase transitions by performing large-scale quantum Monte Carlo simulations and develop an analytical understanding of the nature of these transitions using the framework of Landau-Ginzburg-Wilson theory. Remarkably, we find that under open boundary conditions, the boundary itself undergoes a second-order quantum phase transition, independent of the bulk. These results explain recent experimental observations and provide important insights into both the adiabatic state preparation of novel quantum phases and quantum optimization using Rydberg atom array platforms.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Enhanced cutoff energies for direct and rescattered strong-field photoelectron emission of plasmonic nanoparticles

Abstract The efficient generation, accurate detection, and detailed physical tracking of energetic electrons are of applied interest for high harmonics generation, electron-impact spectroscopy, and femtosecond time-resolved scanning tunneling microscopy. We here investigate the generation of photoelectrons (PEs) by exposing plasmonic nanostructures to intense laser pulses in the infrared (IR) spectral regime and analyze the sensitivity of PE spectra to competing elementary interactions for direct and rescattered photoemission pathways. Specifically, we measured and numerically simulated emitted PE momentum distributions from prototypical spherical gold nanoparticles (NPs) with diameters between 5 and 70 nm generated by short laser pulses with peak intensities of 8.0 × 10 12 and 1.2 × 10 13 W/cm 2 , demonstrating the shaping of PE spectra by the Coulomb repulsion between PEs, accumulating residual charges on the NP, and induced plasmonic electric fields. Compared to well-understood rescattering PE cutoff energies for strong-field photoemission from gaseous atomic targets (10× the ponderomotive energy), our measured and simulated PE spectra reveal a dramatic cutoff-energy increase of two orders of magnitude with a significantly higher contribution from direct photoemission. Our findings indicate that direct PEs reach up to 93 % of the rescattered electron cutoff energy, in contrast to 20 % for gaseous atoms, suggesting a novel scheme for the development of compact tunable tabletop electron sources.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Coupled cluster benchmarks of large noncovalent complexes: The L7 dataset as well as DNA–ellipticine and buckycatcher–fullerene

In this work, benchmark binding energies for dispersion-bound complexes in the L7 dataset, the DNA–ellipticine intercalation complex, and the buckycatcher–C60 complex with 120 heavy atoms using a focal-point method based on the canonical form of second-order Møller−Plesset theory (MP2) and the domain based local pair natural orbital scheme for the coupled cluster with single, double, and perturbative triple excitations [CCSD(T)] extrapolated to the complete basis set (CBS) limit are reported. This work allows for increased confidence given the agreement with respect to values recently obtained using the local natural orbital CCSD(T) for L7 and the canonical CCSD(T)/CBS result for the coronene dimer (C2C2PD). Therefore, these results can be considered pushing the CCSD(T)/CBS binding benchmark to the hundred-atom scale. The disagreements between the two state-of-the-art methods, CCSD(T) and fixed-node diffusion Monte Carlo, are substantial with at least 2.0 (∼10%), 1.9 (∼5%), and 10.3 kcal/mol (∼25%) differences for C2C2PD in L7, DNA–ellipticine, and buckycatcher–C60, respectively. Such sizable discrepancy above “chemical accuracy” for large noncovalent complexes indicates how challenging it is to obtain benchmark binding interactions for systems beyond small molecules, although the three up-to-date density functionals, PBE0+D4, ωB97M-V, and B97M-V, agree better with CCSD(T) for these large systems. In addition to reporting these values, different basis sets and various CBS extrapolation parameters for Hartree–Fock and MP2 correlation energies were tested for the first time in large noncovalent complexes with the goal of providing some indications toward optimal cost effective routes to approach the CBS limit without substantial loss in quality.

Ballesteros, Francisco (ORCID:0000000325732307)↗
NASA NTRS1989

The effects of atomic oxygen on the thermal emittance of high temperature radiator surfaces

Radiator surfaces on high temperature space power systems such as SP-100 space nuclear power system must maintain a high emittance level in order to reject waste heat effectively. One of the primary materials under consideration for the radiators is carbon-carbon composite. Since carbon is susceptible to attack by atomic oxygen in the low earth orbital environment, it is important to determine the durability of carbon composites in this environment as well as the effect atomic oxygen has on the thermal emittance of the surface if it is to be considered for use as a radiator. Results indicate that the thermal emittance of carbon-carbon composite (as low as 0.42) can be enhanced by exposure to a directed beam of atomic oxygen to levels above 0.85 at 800 K. This emittance enhancement is due to a change in the surface morphology as a result of oxidation. High aspect ratio cones are formed on the surface which allow more efficient trapping of incident radiation. Erosion of the surface due to oxidation is similar to that for carbon, so that at altitudes less than approximately 600 km, thickness loss of the radiator could be significant (as much as 0.1 cm/year). A protective coating or oxidation barrier forming additive may be needed to prevent atomic oxygen attack after the initial high emittance surface is formed. Textured surfaces can be formed in ground based facilities or possibly in space if emittance is not sensitive to the orientation of the atomic oxygen arrival that forms the texture.

Rutledge, Sharon K.↗
DOE OSTI2020

Short-Range Order in VI 3

We present a detailed investigation of the crystal structure of VI 3 , a two-dimensional van der Waals material of interest for studies of low-dimensional magnetism. As opposed to the average crystal structure that features $R\bar{3}$ symmetry of the unit cell, our Raman scattering and X-ray atomic pair distribution function analysis supported by density functional theory calculations point to the coexistence of short-range ordered $P\bar{3}$1c and long-range ordered $R\bar{3}$phases. The highest-intensity peak, A 1g 3 , exhibits a moderate asymmetry that might be traced back to the spin–phonon interactions, as in the case of CrI 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1992

The interstellar gas experiment: Analysis in progress

The interstellar gas experiment (IGE) exposed thin metallic foils in order to collect neutral interstellar particles which penetrate the solar system due to their motion relative to the sun. These atoms were entrapped in the collecting foils along with precipitating magnetospheric ions and with ambient atmospheric atoms. For the entire duration of the LDEF mission, seven of the foils collected particles arriving from seven different directions as seen from the spacecraft. In the mass spectrometric analysis of the trapped noble gas component, we detected the He-3, He-4, Ne-20, and Ne-22 isotopes. In order to infer the isotopic ratios in the interstellar medium from the measured concentrations found in the foil piece, several lines of investigation had to be initiated. The flux of incident noble gas atoms from the ambient atmosphere was estimated by detailed calculations. The contributions proved to be negligible, supporting the experimental evidence. Foil and machine backgrounds for the four isotopes which were measured had to be assessed individually. While this was easy for He-4, spurious foil background of He-3 had to be monitored carefully by analyzing unflown foil pieces. Trapped Ne concentrations are not far above the background. During the flight, a stuck electrical relay precluded the foil-trays from sequencing as designed. Therefore, we could not use the seasonal variation of the direction of the incoming interstellar atoms to make the distinction between interstellar and magnetospheric components of the trapped particles. Instead, we had to try the method of stepwise heating to extract the interstellar component at lower temperatures than we use to extract the magnetospheric component (the interstellars hit the foil with lower energies than most of the magnetospherics). New limiting values for the isotopic composition of the interstellar medium, unavailable yet from any other method of measurement, are emerging from this analysis.

Buehler, F.↗
DOE OSTI2022

Generation of Intense Low-Divergence Isolated Soft-X-Ray Attosecond Pulses in a Gas-Filled Waveguide Using Three-Color Synthesized Laser Pulses

Isolated attosecond pulses (IAPs) in the soft-x-ray (SXR) region have been successfully produced via high-order harmonic generation in a gas medium at several laboratories, but pulse energies are much lower compared to the IAPs in the extreme ultraviolet. Here, we show that in a gas-filled hollow waveguide, an efficient gating method using a few-cycle three-color synthesizer is able to generate stronger SXR IAPs. We show that an 104-as IAP in the SXR region (central energy of 210 eV) with a higher pulse energy (0.9 nJ) and a lower divergence (within 1.5 mrad) can be generated with a three-color laser beam for input pulse energy at 0.62 mJ, under the condition of optimal gas pressure and waveguide length. The enhancement of the IAP is attributed to favorable phase matching of SXR high harmonics caused by the evolution of the three-color waveform during its propagation in the waveguide, which can be understood by analyzing the time shift of the waveform due to the interplay of the waveguide mode, atomic dispersion, and plasma dispersion. We check that the gating method is quite robust with respect to the phase jitter in the waveform. The advantage of this method is further demonstrated by comparing the generation of SXR high harmonics and attosecond pulses with two other schemes: the three-color waveform in a gas cell and a previously optimized two-color waveform in a gas-filled waveguide.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Structural Stability of Graphene-Supported Pt Layers: Diffusion Monte Carlo and Density Functional Theory Calculations

In this study, we used a combination of diffusion Monte Carlo and density functional theory calculations to investigate the stability and interlayer binding of various layered structures of Pt atoms adsorbed on graphene. Our findings show that vertically buckled Pt monolayer and bilayer with (111)-packing order are more energetically favorable than the corresponding buckled (100) or flat (100)-packing structures. This can be attributed to the significant lattice mismatch (>10%) between pristine graphene and a free-standing (100)-packing Pt layer. Additionally, our calculations reveal that among the (100)-packing Pt layers, an incommensurate structure with a Pt/C atomic ratio less than 1/2 may be more stable than the commensurate structures registered at the bridge sites, which aligns with recent experimental findings of incommensurate (100)-packing Pt layers on graphene. The interlayer binding between the Pt layer and graphene is found to be primarily driven by van der Waals interaction, except for the AA-stacked buckled-(100) Pt bilayer where the bottom Pt atoms show chemisorption to the graphene surface. In conclusion, this research offers a comprehensive examination of the stability and interlayer binding of metallic Pt layers, providing valuable insights for potential applications as a next-generation catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Molecular simulations and NMR reveal how lipid fluctuations affect membrane mechanics

Lipid bilayers form the main matrix of functional cell membranes, and their dynamics underlie a host of physical and biological processes. Here we show that elastic membrane properties and collective molecular dynamics (MD) are related by the mean-square amplitudes (order parameters) and relaxation rates (correlation times) of lipid acyl chain motions. We performed all-atom MD simulations of liquid-crystalline bilayers that allow direct comparison with carbon-hydrogen (CH) bond relaxations measured with NMR spectroscopy. Previous computational and theoretical approaches have assumed isotropic relaxation, which yields inaccurate description of lipid chain dynamics and incorrect data interpretation. Instead, the new framework includes a fixed bilayer normal (director axis) and restricted anisotropic motion of the CH bonds in accord with their segmental order parameters, enabling robust validation of lipid force fields. Simulated spectral densities of thermally excited CH bond fluctuations exhibited well-defined spin-lattice (Zeeman) relaxations analogous to those in NMR measurements. Their frequency signature could be fit to a simple power-law function, indicative of nematic-like collective dynamics. Moreover, calculated relaxation rates scaled as the squared order parameters yielding an apparent K C modulus for bilayer bending. Our results show a strong correlation with K C values obtained from solid-state NMR studies of bilayers without and with cholesterol as validated by neutron spin-echo measurements of membrane elasticity. The simulations uncover a critical role of interleaflet coupling in membrane mechanics and thus provide important insights into molecular sites of emerging elastic properties within lipid bilayers.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Radiation-Enhanced Anion Transport in Hematite

The influence of radiation-induced (1 MeV energy H+ to ~0.1 dpa at 450°C), non-equilibrium point defect populations on mass transport is studied with an integrated campaign of experimental and theoretical methods. Using epitaxial thin films of hematite with embedded 18O tracer layers and nanoscale atom probe tomography measurements, it is shown that anion self-diffusion is enhanced by at least 2 orders of magnitude under irradiation compared to thermal diffusion alone. Complementary scanning transmission electron microscopy of vacuum annealed specimens, reveals associated microstructural changes in the oxide films, including local phase transformation to Fe3O4 and the development of nanoscale voids from vacancy coalescence. Point defect formation and migration energies were computed from density functional theory and applied within the context of chemical rate theory to analyze contributions from both interstitial and vacancy mechanisms to self-diffusion in thermal and irradiation conditions. Comparisons are made between calculated, literature and newly measured self-diffusion values, revealing good agreement on the magnitude of radiation-enhanced anion diffusion. Further, the model suggests a transition from vacancy to interstitialcy mechanisms at low temperatures and high oxygen activity, consistent with the varied activation energies reported from prior studies.

iron oxides, isotopic tracers, atom probe tomograp↗
DOE OSTI2024

Diabatic Valence-Hole Concept

A global diabatization scheme, based on the “valence-hole” concept, has been previously applied to model webs of avoided crossings that exist in four electronic-state symmetry manifolds of C 2 ( 1 Π g , 3 Π g , 1 Σ u + , and 3 Σ u + ). Here, this model is extended to the electronically excited states of four more molecules: CN ( 2 Σ + ), N 2 ( 3 Π u ), SiC ( 3 Π), and Si 2 ( 3 Π g ). Many strangenesses in the spectroscopic observations (e.g., energy level structure, predissociation linewidths, and radiative lifetimes) for all four electronic state systems discussed here are accounted for by this unified model. The key concept of the model is valence-hole electron configurations: 3σ 2 4σ 1 1π 4 5σ 2 in CN ( 2 Σ + ), 2σ g 2 2σ u 1 1π u 4 3σ g 2 1π g 1 in N 2 ( 3 Π u ), 5σ 2 6σ 1 7σ 2 2π 3 in SiC ( 3 Π), and 4σ g 2 4σ u 1 5σ g 2 2π u 3 in Si 2 ( 3 Π g ), all of which have a triply occupied “valence-core” (i.e., 2σ g 2 2σ u 1 or the equivalent). These valence-hole configurations have a nominal bond order of three or higher and correlate with high-energy separated-atom limits with an np ← ns (n = 2, 3) promotion in one of the atomic constituents. On its way to dissociation, the strongly bound diabatic valence-hole state crosses multiple weakly bound or repulsive states, which belong to electron configurations with a completely filled valence-core. These curve crossings between diabatic potentials result in a network of many avoided crossings among multiple electronic states, analogous to the well-studied electronic structure landscape of ionic-covalent crossings in strongly ionic molecules. In conclusion, considering the unique role of valence-hole states in shaping the global electronic structure, the valence-hole concept should be added to our intuitive framework of chemical bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Spin Reorientation in Antiferromagnetic Layered FePt 5 P

FePt 5 P, a substitutional variant of the anti-CeCoIn 5 structure type in the space group P4/mmm, was synthesized by a high-temperature solid-state method and structurally characterized by X-ray diffraction. FePt 5 P contains layers of FePt 12 clusters formed by magnetically active Fe and heavy Pt with strong spin-orbit coupling (SOC); the layers are separated by P atoms. The various Fe–Pt distances in FePt 12 clusters generate complex magnetic orders in FePt 5 P. According to temperature-dependent magnetic and specific heat measurements, FePt 5 P shows a stripe-type antiferromagnetic order at T N ≈ 90 K, which is also confirmed by resistivity measurements. Furthermore, a spin reorientation occurs at ~74 and ~68 K in and out of the ab plane based on the specific heat measurements. The temperature-dependent neutron powder diffraction patterns demonstrate the antiferromagnetic order in FePt 5 P, and the spins orientate up to 58.4° with respect to the c axis at 10 K. First-principles calculations of FePt 5 P show the band splitting at the Fermi level by strong SOC and the s–d hybridization between P and Fe/Pt electrons enhances the structural stability and affects the magnetic ordering.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Electronic structure factors and the importance of adsorbate effects in chemisorption on surface alloys

The chemisorption energy is an integral aspect of surface chemistry, central to numerous fields such as catalysis, corrosion, and nanotechnology. Electronic-structure-based methods such as the Newns-Anderson model are therefore of great importance in guiding the engineering of material surfaces with optimal properties. However, existing methods are inadequate for interpreting complex, multi-metallic systems. Herein, we introduce a physics-based chemisorption model for alloyed transition metal surfaces employing primarily metal d-band properties that accounts for perturbations in both the substrate and adsorbate electronic states upon interaction. Importantly, we show that adsorbate-induced changes in the adsorption site interact with its chemical environment leading to a second-order response in chemisorption energy with the d-filling of the neighboring atoms. We demonstrate the robustness of the model on a wide range of transition metal alloys with O, N, CH, and Li adsorbates yielding a mean absolute error of 0.13 eV versus density functional theory reference chemisorption energies.

36 MATERIALS SCIENCE↗