20% wind energy by 2030: Increasing wind energy's contribution to U.S. electricity supply
Report on the requirements needed to generate twenty percent of the nation's electricity from wind energy by the year 2030.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Report on the requirements needed to generate twenty percent of the nation's electricity from wind energy by the year 2030.
A report on the impact of wind energy development on air pollution.
Now is the time to plan to integrate significant quantities of distributed renewable energy into the electricity grid. Concerns about climate change, the adoption of state-level renewable portfolio standards and incentives, and accelerated cost reductions are driving steep growth in U.S. renewable energy technologies. The number of distributed solar photovoltaic (PV) installations and wind farms are growing rapidly. The potential for concentrated solar power (CSP) also continues to grow. As renewable energy technologies mature, they can provide a significant share of our nation’s electricity requirements.
Report on the specific factors driving wind-power-related economic development and on the impact of specific economic development variables on new wind project economic benefits.
A review of wind-diesel power generation systems in Arctic conditions.
Report on the economic impacts of 1000 MW of wind power development in Colorado.
Executive summary of a report on the requirements needed to generate twenty percent of the nation's electricity from wind energy by the year 2030.
The report summarizes the major developments in the U.S. wind energy market in 2008.
This report uses statistical analysis to evaluate the impact of wind power projects on property values, and fails to uncovers conclusive evidence of the existence of any widespread property value impacts.
As the size and number of wind power plants (WPP) increases, power system planners will need to study their impact on the power system in more detail. As the level of wind power penetration into the grid increases, the transmission system integration requirements will become more critical. A very large WPP may contain hundreds of megawatt-size wind turbines. These turbines are interconnected by an intricate collector system. While the impact of individual turbines on the larger power system network is minimal, collectively, wind turbines can have a significant impact on the power systems during a severe disturbance such as a nearby fault. Since it is not practical to represent all individual wind turbines to conduct simulations, a simplified equivalent representation is required. This paper focuses on our effort to develop an equivalent representation of a WPP collector system for power system planning studies. The layout of the WPP, the size and type of conductors used, and the method of delivery (overhead or buried cables) all influence the performance of the collector system inside the WPP. Our effort to develop an equivalent representation of the collector system for WPPs is an attempt to simplify power system modeling for future developments or planned expansions of WPPs. Although we use a specific large WPP as a case study, the concept is applicable for any type of WPP.
This report provides an overview of the Wind Program's accomplishments and activities in 2010.
The report summarizes the major developments in the U.S. wind energy market in 2009.
This is the executive summary for the 2009 Wind Technologies Market Report, which covers the major developments in the U.S. wind energy market in 2009.
This report provides a comprehensive overview of trends in the U.S. wind power market in 2010. The report analyzes trends in wind power capacity, industry, manufacturing, turbines, installed project costs, project performance, and wind power prices. It also describes trends among wind power developers, project owners, and power purchasers, and discusses financing issues.
This study assesses the potential to deliver hydrogen through the existing natural gas pipeline network as a hydrogen and natural gas mixture to defray the cost of building dedicated hydrogen pipelines. Blending hydrogen into the existing natural gas pipeline network has also been proposed as a means of increasing the output of renewable energy systems such as large wind farms.
Wind applications require the ability to simulate rotating blades. To support this use-case, a novel design-order sliding mesh algorithm has been developed and deployed. The hybrid method combines the control volume finite element methodology (CVFEM) with concepts found within a discontinuous Galerkin (DG) finite element method (FEM) to manage a sliding mesh. The method has been demonstrated to be design-order for the tested polynomial basis (P=1 and P=2) and has been deployed to provide production simulation capability for a Vestas V27 (225 kW) wind turbine. Other stationary and canonical rotating ow simulations are also presented. As the majority of wind-energy applications are driving extensive usage of hybrid meshes, a foundational study that outlines near-wall numerical behavior for a variety of element topologies is presented. Results indicate that the proposed nonlinear stabilization operator (NSO) is an effective stabilization methodology to control Gibbs phenomena at large cell Peclet numbers. The study also provides practical mesh resolution guidelines for future analysis efforts. Application-driven performance and algorithmic improvements have been carried out to increase robustness of the scheme on hybrid production wind energy meshes. Specifically, the Kokkos-based Nalu Kernel construct outlined in the FY17/Q4 ExaWind milestone has been transitioned to the hybrid mesh regime. This code base is exercised within a full V27 production run. Simulation timings for parallel search and custom ghosting are presented. As the low-Mach application space requires implicit matrix solves, the cost of matrix reinitialization has been evaluated on a variety of production meshes. Results indicate that at low element counts, i.e., fewer than 100 million elements, matrix graph initialization and preconditioner setup times are small. However, as mesh sizes increase, e.g., 500 million elements, simulation time associated with \setup-up" costs can increase to nearly 50% of overall simulation time when using the full Tpetra solver stack and nearly 35% when using a mixed Tpetra- Hypre-based solver stack. The report also highlights the project achievement of surpassing the 1 billion element mesh scale for a production V27 hybrid mesh. A detailed timing breakdown is presented that again suggests work to be done in the setup events associated with the linear system. In order to mitigate these initialization costs, several application paths have been explored, all of which are designed to reduce the frequency of matrix reinitialization. Methods such as removing Jacobian entries on the dynamic matrix columns (in concert with increased inner equation iterations), and lagging of Jacobian entries have reduced setup times at the cost of numerical stability. Artificially increasing, or bloating, the matrix stencil to ensure that full Jacobians are included is developed with results suggesting that this methodology is useful in decreasing reinitialization events without loss of matrix contributions. With the above foundational advances in computational capability, the project is well positioned to begin scientific inquiry on a variety of wind-farm physics such as turbine/turbine wake interactions.
Renewable energy has grown throughout the years. It is not just something for today. With the United States power electrical grid being 100 plus years old, renewable energy is the future. There are many different types of renewable energy. Solar photovoltaic array units and wind turbines seem to be the most common community scale renewable energy systems. There are new solar and wind farms popping up in more and more places each day. It is said that installing the farms is a fast process as compared to dotting the "i's" and crossing the "t's" (paper work), which is really the most time-consuming part of the entire project. During the internship at Sandia, the Indian Energy interns attended many field visits to various tribal reservations. On these field visits, the interns were able to experience first-hand some amazing renewable energy plans and projects which have now become a reality. With each site visit, the success of tribal projects is seen where hard work and persistence pays off. It brings joy to see these tribes making their dreams a reality. It is heartwarming to hear the stories of why the tribe chose to bring renewable projects to their people. It is also very informative because the tribal hosts encourage as many questions as can be asked. The field visits are what make ideas possible and to dream of what could be pursued. Research is a big part making these goals and dreams a reality. Without the field visits and knowledge shared by the tribal staff and leaders, a relevant research topic would have been difficult to focus on. Returning for a second summer as an intern at Sandia National Laboratories' Indian Energy program, several research topics were considered. Ultimately, this research paper's focus is to incorporate renewable energy specifically to take care of Mother Nature as well as the Turtle Mountain Band of Chippewa Indian people. There have been many deaths on North Dakota Highway 281, which it is the main road of the Turtle Mountain Band of Chippewa reservation. The highway has a high volume of traffic every day, in addition to many people who frequently walk this road. There is no walking or bike path along the road; most people tend to walk the shoulders of the road. This research paper is a way to help protect these pedestrians with an idea of lighting the highway from the west end of Belcourt to one of are housing developments that is 5.34 miles to the west of town. This research paper will look at the various types of street lighting methods and provide recommendations for a suitable and economical project.
The Texas Tech University (TTU) research group is actively studying wind turbine wake development, as part of developing innovative wake control strategies to improve the performance of wind farms. The team has a set of eight ground lidars to perform field measurements at the Sandia National Laboratories SWiFT site. This document describes tests details including configurations, timeframe, hardware, and the required collaboration from the Sandia team. This test plan will facilitate the coordination between both TTU and the Sandia team in terms of site accessibility, staff training, and data sharing to meet the specific objectives of the tests.