Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Visual Programming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Three-Centimeter Doppler Radar Observations of Wingtip-Generated Wake Vortices in Clear Air

This report documents a high risk, high pay-off experiment with the objective of detecting, for the first time, the presence of aircraft wake vortices in clear air using X-band Doppler radar. Field experiments were conducted in January 1995 at the Wallops Flight Facility (WFF) to demonstrate the capability of the 9.33 GHz (I=3 cm) radar, which was assembled using an existing nine-meter parabolic antenna reflector at VVTT and the receiver/transmitter from the NASA Airborne Windshear Radar-Program. A C-130-aircraft, equipped with wingtip smoke generators, created visually marked wake vortices, which were recorded by video cameras. A C-band radar also observed the wake vortices during detection attempts with the X-band radar. Rawinsonde data was used to calculate vertical soundings of wake vortex decay time, cross aircraft bearing wind speed, and water vapor mixing ratio for aircraft passes over the radar measurement range. This experiment was a pathfinder in predicting, in real time, the location and persistence of C-130 vortices, and in setting the flight path of the aircraft to optimize X-band radar measurement of the wake vortex core in real time. This experiment was conducted in support of the NASA Aircraft Vortex Spacing System (AVOSS).

Marshall, Robert E.↗
NASA NTRS2009

Clogging of Joule-Thomson Devices in Liquid Hydrogen Handling

Experiments conducted at the NASA Glenn Research Center indicate that Joule-Thomson devices become clogged when transferring liquid hydrogen (LH2), operating at a temperature range from 20.5 to 24.4 K. Blockage does not exist under all test conditions but is found to be sensitive to the inlet temperature of the LH2. At a subcooled inlet temperature of 20.5 K blockage consistently appears but is dissipated when the fluid temperature is raised above 24.5 K. Clogging steadily reduced flow rate through the orifices, eventually resulting in complete blockage. This tendency poses a threat to spacecraft cryogenic propulsion systems that would utilize passive thermal control systems. We propose that this clogging is due to trace amounts of neon in the regular LH2 supply. Neon freezes at 24.5 K at one atmosphere pressure. It is postulated that between 20.5 and 24.5 K, neon remains in a meta-stable, supercooled liquid state. When impacting the face of an orifice, liquid neon droplets solidify and accumulate, blocking flow over time. The purpose of this test program was to definitively quantify the phenomena experimentally by obtaining direct visual evidence of orifice clogging by accretion from neon contaminates in the LH2 flow stream, utilizing state of the art imaging technology. Tests were conducted with LH2 flowing in the temperature range of 20.5 to 24.4 K. Additional imaging was also done at LH2 temperatures with no flow to verify clear view through the orifice.

Jurns, John M.↗
NASA NTRS2009

Mars Public Engagement Overview

This viewgraph presentation reviews the Mars public engagement goal to understand and protect our home planet, explore the Universe and search for life, and to inspire the next generation of explorers. Teacher workshops, robotics education, Mars student imaging and analysis programs, MARS Student Imaging Project (MSIP), Russian student participation, MARS museum visualization alliance, and commercialization concepts are all addressed in this project.

public outreach↗
NASA NTRS2016

Technical Challenges and Lessons from the Migration of the GLOBE Data and Information System to Utilize Cloud Computing Service

The Global Learning and Observation to Benefit the Environment (GLOBE) Data and Information System supports an international science and education program with capabilities to accept local environment observations, archive, display and visualize them along with global satellite observations. Since its inception twenty years ago, the Web and database system has been upgraded periodically to accommodate the changes in technology and the steady growth of GLOBEs education community and collection of observations. Recently, near the end-of-life of the system hardware, new commercial computer platform options were explored and a decision made to utilize Cloud services. Now the GLOBE DIS has been fully deployed and maintained using Amazon Cloud services for over two years now. This paper reviews the early risks, actual challenges, and some unexpected findings as a result of the GLOBE DIS migration. We describe the plans, cost drivers and estimates, highlight adjustments that were made and suggest improvements. We present the trade studies for provisioning, for load balancing, networks, processing, storage, as well as production, staging and backup systems. We outline the migration teams skills and required level of effort for transition, and resulting changes in the overall maintenance and operations activities. Examples include incremental adjustments to processing capacity and frequency of backups, and efforts previously expended on hardware maintenance that were refocused onto application-specific enhancements.

GLOBE↗
NASA NTRS2017

Technical Challenges and Lessons from the Migration of the GLOBE Data and Information System to Utilize Cloud Computing Service

The Global Learning and Observation to Benefit the Environment (GLOBE) Data and Information System supports an international science and education program with capabilities to accept local environment observations, archive, display and visualize them along with global satellite observations. Since its inception twenty years ago, the Web and database system has been upgraded periodically to accommodate the changes in technology and the steady growth of GLOBEs education community and collection of observations. Recently, near the end-of-life of the system hardware, new commercial computer platform options were explored and a decision made to utilize Cloud services. Now the GLOBE DIS has been fully deployed and maintained using Amazon Cloud services for over two years now. This paper reviews the early risks, actual challenges, and some unexpected findings as a result of the GLOBE DIS migration. We describe the plans, cost drivers and estimates, highlight adjustments that were made and suggest improvements. We present the trade studies for provisioning, for load balancing, networks, processing, storage, as well as production, staging and backup systems. We outline the migration teams skills and required level of effort for transition, and resulting changes in the overall maintenance and operations activities. Examples include incremental adjustments to processing capacity and frequency of backups, and efforts previously expended on hardware maintenance that were refocused onto application-specific enhancements.

GLOBE Data↗
DOE OSTI2014

Ravel

Ravel is a tool for analyzing and visualizing parallel execution traces. It deduces a logical structure of parallel program events from the trace records and calculates comparative metrics. It displays the results of this analysis using multiple views at varying levels of detail to allow interactive exploration of the trace.

Source record↗
NASA NTRS2022

Robotics Verification and Validation Strategies for Perseverance Rover Sampling and Caching

The Mars 2020 Sampling and Caching Subsystem(SCS) is the most complex robotic system ever fielded on a MarsRover. It includes a 5 degree-of-freedom Robotic Arm, coringdrill, gas Dust Removal Tool, interfaces for two turret-mountedinstruments, and an Adaptive Caching Assembly (ACA). TheACA is itself a complex robotic system, containing hardware tosupport docking and bit exchange, a 3 degree-of-freedomSample Handling Assembly for manipulating sample tubes,storage for several drill bits and sample tubes, and mechanismsto support observing and sealing samples collected by the drill.To successfully verify and validate the SCS hardware andsoftware and its integration with the Mars 2020 flight systemseveral key strategies were employed.The SCS Verification and Validation (V&V) program utilizedmultiple test venues with tiered levels of fidelity. These includedsimulation and visualization software environments, low fidelitydevelopment testbeds, testbeds with high fidelity SCS hardwareand commercial off-the shelf avionics, integrated systemtestbeds with flight-like avionics, and environmental testbedscapable of simulating Martian surface temperature andpressure. Multiple units of each SCS hardware componentmoved fluidly between test venues to accomplish myriadstandalone and coordinated test objectives. Test preparationand executions were performed by a diverse team of engineerswith training and technical ownership tailored for individualexperience and role. Despite significant differences between testvenues, the SCS V&V team established efficient and consistentprocesses and tools for procedure development, test execution,and data review that enabled personnel, as well as technicalproducts such as sequences and parameter configurations, toflow between venues effectively. A series of benchmark testsprovided evidence of performance consistency as elements weretransferred between venues and as system capability evolved.This paper provides an overview of the SCS V&V program andexplores several overarching strategies that enabled successfuloperation in the face of unprecedented complexity. Keyoutcomes of the SCS validation effort are summarized, alongwith lessons learned and beneficial integrations of validationtool and process innovations into Mars surface operations.

Brooks, Sawyer↗
DOE OSTI2020

Enhanced Visualization Capabilities in OpenMC: Report of Activities under a DOE GAIN Voucher

This work was performed under a Cooperative Research and Development Agreement (CRADA) through the U.S. Department of Energy’s Gateway for Accelerated Innovations in Nuclear (GAIN) program in partnership with Oklo Inc., the industry participant. The broad goal of this project was to improve the visualization capabilities of OpenMC related to model development and simulation results. OpenMC is a Monte Carlo particle transport code that is developed and maintained by a broad community of contributors, of which Argonne National Laboratory plays a leading role.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2001

Bi-Component Droplet Combustion in Reduced Gravity

This research deals with reduced-gravity combustion of bi-component droplets initially in the mm size range or larger. The primary objectives of the research are to study the effects of droplet internal flows, thermal and solutal Marangoni stresses, and species volatility differences on liquid species transport and overall combustion phenomena (e.g., gas-phase unsteadiness, burning rates, sooting, radiation, and extinction). The research program utilizes a reduced-gravity environment so that buoyancy effects are rendered negligible. Use of large droplets also facilitates visualization of droplet internal flows, which is important for this research. In the experiments, droplets composed of low- and high-volatility species are burned. The low-volatility components are initially present in small amounts. As combustion of a droplet proceeds, the liquid surface mass fraction of the low-volatility component will increase with time, resulting in a sudden and temporary decrease in droplet burning rates as the droplet rapidly heats to temperatures close to the boiling point of the low-volatility component. This decrease in burning rates causes a sudden and temporary contraction of the flame. The decrease in burning rates and the flame contraction can be observed experimentally. Measurements of burning rates as well as the onset time for flame contraction allow effective liquid-phase species diffusivities to be calculated, e.g., using asymptotic theory. It is planned that droplet internal flows will be visualized in future flight and ground-based experiments. In this way, effective liquid species diffusivities can be related to droplet internal flow characteristics. This program is a continuation of extensive ground based experimental and theoretical research on bi-component droplet combustion that has been ongoing for several years. The focal point of this program is a flight experiment (Bi-Component Droplet Combustion Experiment, BCDCE). This flight experiment is under development. However, supporting studies have been performed. Because of space limitations, only some of the research performed over the last two years (since the 5th Microgravity Combustion Workshop) is summarized here.

Shaw, B. D.↗
DOE OSTI2019

Double-Shell Tank Primary Bottom Inspection Development - 19067

Double-Shell Tank (DST) integrity at Hanford is maintained with a variety of activities such as ultrasonic and visual inspections, chemistry controls, corrosion monitoring and structural analyses methods [1]. A pressing need for the Double-Shell Tank Integrity Program is the ability to inspect the bottom of the tanks. Though the DSTs' annulus spaces (the space between the internal and external tank walls) have been inspected visually since 1992 and with Ultrasonic Testing (UT) since 1996, WRPS has been unable to conduct inspections of the tank bottoms due to limitations of available technology, omitting about 40 percent of the tank surface below the maximum fill level from routine inspection. Visual inspections of the tank annulus have been conducted up to five times in some DSTs and the annulus space for all of the DSTs has been inspected twice with UT. The annulus region includes the walls of the primary tank and secondary liner along with accessible portions of the secondary liner bottom. Due to the lack of under-tank inspection technology, degradation of the primary tank bottom in Tank AY-102 was undetected until the tank leaked into its annulus space, confirmed in 2012 [2]. Since that time, WRPS has been working with the nondestructive examination community and the Pacific Northwest National Laboratory to evaluate potential technologies to conduct these challenging remote inspections. Recent work has included the development, testing, and deployment of several remote visual inspection technologies to observe the condition of the primary tank bottom of the DSTs by leveraging air distribution slots in the refractory pad on which it rests. Robotic solutions to conduct this inspection were developed with a detailed understanding of the physical configuration and operational logistics. Understanding and subsequent communication of these details to vendors within the robotics and nondestructive examination community was a critical component to the successful production of these new tools. In total, two remote visual inspection tools were produced by two vendors. The first tool was designed to leverage existing ultrasonic testing magnetic wall crawler technology in use within the double-shell tank annuli at Hanford. This resulted in a cost savings, immediate familiarization with the equipment, and a more streamlined shop to field experience. The second tool was developed from the ground up, and represents a more tailored and purpose-built solution to the problem. While costlier and more complex, it is also more versatile and capable of future growth or adaptation. Initial design of both tools began in early FY17 with fabrication and testing completed in early FY18. The tools were designed to be deployed alongside existing inspection operations and expand coverage. Development of visual inspection tools to evaluate the primary tank bottom region of the double-shell tanks was planned as the first stage of inspection. Continued development of volumetric sensors and incorporation of these inspection tools into Hanford's ongoing Double-Shell Tank Integrity Program are the next steps, continuously seeking to expand understanding of asset integrity and remaining useful life. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1988

Ice/frost/debris assessment for space shuttle mission STS-26R

An Ice/Frost/Debris Assessment was conducted for Space Shuttle Mission STS-26R. Debris inspections of the flight elements and launch pad are performed before and after launch. Ice/Frost conditions are assessed by use of computer programs, nomographs, and infrared scanner data during cryogenic loading of the vehicle followed by an on-pad visual inspection. High speed photography is viewed after launch to identify ice/debris sources and evaluate potential vehicle damage. The Ice/Frost/Debris conditions of Mission 26R and their effect on the Space Shuttle Program is documented.

Stevenson, Charles G.↗
NASA NTRS2013

Scalable Adaptive Graphics Environment (SAGE) Software for the Visualization of Large Data Sets on a Video Wall

The use of collaborative scientific visualization systems for the analysis, visualization, and sharing of "big data" available from new high resolution remote sensing satellite sensors or four‐dimensional numerical model simulations is propelling the wider adoption of ultra‐resolution tiled display walls interconnected by high speed networks. These systems require a globally connected and well‐integrated operating environment that provides persistent visualization and collaboration services. This abstract and subsequent presentation describes a new collaborative visualization system installed for NASA's Shortterm Prediction Research and Transition (SPoRT) program at Marshall Space Flight Center and its use for Earth science applications. The system consists of a 3 x 4 array of 1920 x 1080 pixel thin bezel video monitors mounted on a wall in a scientific collaboration lab. The monitors are physically and virtually integrated into a 14' x 7' for video display. The display of scientific data on the video wall is controlled by a single Alienware Aurora PC with a 2nd Generation Intel Core 4.1 GHz processor, 32 GB memory, and an AMD Fire Pro W600 video card with 6 mini display port connections. Six mini display‐to‐dual DVI cables are used to connect the 12 individual video monitors. The open source Scalable Adaptive Graphics Environment (SAGE) windowing and media control framework, running on top of the Ubuntu 12 Linux operating system, allows several users to simultaneously control the display and storage of high resolution still and moving graphics in a variety of formats, on tiled display walls of any size. The Ubuntu operating system supports the open source Scalable Adaptive Graphics Environment (SAGE) software which provides a common environment, or framework, enabling its users to access, display and share a variety of data‐intensive information. This information can be digital‐cinema animations, high‐resolution images, high‐definition video‐teleconferences, presentation slides, documents, spreadsheets or laptop screens. SAGE is cross‐platform, community‐driven, open‐source visualization and collaboration middleware that utilizes shared national and international cyberinfrastructure for the advancement of scientific research and education.

Jedlovec, Gary↗
DOE OSTI2022

LANL Regular Employee Population and Demographics, FY15-21

This document summarizes an effort to compile and analyze the LANL regular employee population’s demographic attributes and trends between FY15-FY21 using MicroStrategy, a web-based data analytics and visualization tool. LANL’s HR Division collected and prepared data for the Weapons Program’s annual reporting activities for the 2017 through 2023 NNSA Stockpile Stewardship and Management Plan (SSMP). Los Alamos workforce data represent the fiscal year-end snapshot of the permanent employee population who are categorized by the Common Occupational Classification System (COCS). This work enables further analyses, including trends for all workforce attributes presented in the SSMPs as well as a definition of a crosswalk between COCS categorization and the internal laboratory job classification hierarchy. Data for other sites and the federal workforce, as shown in the SSMPs, are included and corresponding figures can be visualized within the MicroStrategy tool. A portable, Excel-based version of the tool was developed and shared with the multi-site workforce working group. This summary highlights selected aspects of the LANL regular workforce. The data analyses and visualizations communicate insights within three major themes regarding permanent LANL employees: 1) demographic transformation, 2) attrition, and 3) skills. Regarding demographic transformation, and consistent with the general trend across the enterprise, early career regular employees are the fastest growing group, with growth ranging between 12-34% year-to-year over the seven-year period analyzed. The data also reflect effects of internal and external factors on attrition; the large spike in separations in FY18 aligns with the contract transition from LANS to Triad and the dip in attrition between FY20-FY21 is likely a result of the global pandemic. The population of regular employees in general management, engineer, and operator COCS categories have the fastest growth rates amongst all the occupational categories. The MicroStrategy and Excel tools provide additional details and trends.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS1974

Robots in space exploration

A brief outline of NASA's current robotics program is presented. Efforts are being concentrated on a roving surface vehicle for Mars exploration. This vehicle will integrate manipulative, locomotive, and visual functions and will feature an electromechanical manipulator, stereo TV cameras, a laser rangefinder, a minicomputer, and a remote off-line computer. The program hinges on the iterative development of complex scenarios describing the robot's mission and the interrelationships among its various subsystems.

Dobrotin, B. M.↗
DOE OSTI2015

Ordering Traces Logically to Identify Lateness in Message Passing Programs

Event traces are valuable for understanding the behavior of parallel programs. However, automatically analyzing a large parallel trace is difficult, especially without a specific objective. We aid this endeavor by extracting a trace's logical structure, an ordering of trace events derived from happened-before relationships, while taking into account developer intent. Using this structure, we can calculate an operation's delay relative to its peers on other processes. The logical structure also serves as a platform for comparing and clustering processes as well as highlighting communication patterns in a trace visualization. We present an algorithm for determining this idealized logical structure from traces of message passing programs, and we develop metrics to quantify delays and differences among processes. We implement our techniques in Ravel, a parallel trace visualization tool that displays both logical and physical timelines. Rather than showing the duration of each operation, we display where delays begin and end, and how they propagate. As a result, we apply our approach to the traces of several message passing applications, demonstrating the accuracy of our extracted structure and its utility in analyzing these codes.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1992

Distributed Visualization for Computational Fluid Dynamics

Distributed concurrent visualization and computation in computational fluid dynamics (CFD) is not a new concept. Specialized applications such as Realtime Interactive Particle-tracer (RIP) and vendor specific tools like Distributed Graphics Language (DGL) have been in use for some time. This paper describes a current project underway at NASA Lewis Research Center to provide the CFD researcher with an easy method for incorporating distributed processing concepts into program development. Details on the FORTRAN capable interface to a set of network and visualization functions are presented along with some results from initial CFD case studies that employ these techniques.

Don J Sosoka↗
NASA NTRS1990

Flow studies in close-coupled ventral nozzles for STOVL aircraft

Flow in a generic ventral nozzle system was studied experimentally and analytically with the PARC3D computational fluid dynamics program in order to evaluate the program's ability to predict system performance and internal flow patterns. A generic model of a tailpipe with a rectangular ventral nozzle, about 1/3 of full size, was tested with unheated air at steady state pressure ratios up to 4.0. The end of the tailpipe was closed to simulate a blocked exhaust nozzle. Flow behavior into and through the ventral duct is discussed and illustrated with paint streak flow visualization photographs. PARC3D graphic images are shown for comparison with the experimental photographs. The program successfully predicted internal flow patterns; it also computed thrust and discharge coefficients within 1 pct. of measured values.

Mcardle, Jack G.↗
NASA NTRS1989

Ice/frost/debris assessment for space shuttle mission STS-27R, December 2, 1988

An Ice/Frost/Debris assessment was conducted for Space Shuttle Mission STS-27R. Debris inspections of the flight elements and launch pad are performed before and after launch. Ice/frost conditions are assessed by the use of computer programs, nomographs, and infrared scanner data during cryogenic loading of the vehicle followed by an on-pad visual inspection. High speed photography is viewed after launch to identify ice/debris sources and evaluate potential vehicle damage. The Ice/Frost/Debris conditions of Mission STS-27R and their effect on the Space Shuttle Program are documented.

Katnik, Gregory N.↗