Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “U”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Magnetic field-aligned electric potentials in nonideal plasma flows

The electric field component parallel to the magnetic field arising from plasma flows which violate the frozen-in field condition of ideal magnetohydrodynamics is discussed. The quantity of interest is the potential U = integral E parallel ds where the integral is extended along field lines. It is shown that U can be directly related to magnetic field properties, expressed by Euler potentials, even when time-dependence is included. These results are applicable to earth's magnetosphere, to solar flares, to aligned-rotator models of compact objects, and to galactic rotation. On the basis of order-of-magnitude estimates, these results support the view that parallel electric fields associated with nonideal plasma flows might play an important role in cosmic particle acceleration.

Schindler, K.↗
NASA NTRS1991

Multi-resolution analysis for ENO schemes

Given an function, u(x), which is represented by its cell-averages in cells which are formed by some unstructured grid, we show how to decompose the function into various scales of variation. This is done by considering a set of nested grids in which the given grid is the finest, and identifying in each locality the coarsest grid in the set from which u(x) can be recovered to a prescribed accuracy. This multi-resolution analysis was applied to essentially non-oscillatory (ENO) schemes in order to advance the solution by one time-step. This is accomplished by decomposing the numerical solution at the beginning of each time-step into levels of resolution, and performing the computation in each locality at the appropriate coarser grid. An efficient algorithm for implementing this program in the 1-D case is presented; this algorithm can be extended to the multi-dimensional case with Cartesian grids.

Harten, Ami↗
NASA NTRS1991

Laser studies of the photodissociation dynamics of cometary radicals

In the past year, it was shown that in the 193 nm photolysis of C2H, the C2 radical is produced in a variety of electronic, vibrational, and rotational states. The relative population of the vibrational and rotational states of C2(A 1 Pi u), C2(B 1 Sigma g +), and C2(A 3 Pi u) were determined in a static gas cell and in a pulsed molecular beam. It seems as though the original angular momentum of the C2H molecule appears as part of the angular momentum of the C2 radical. A attempt is being made to discover the mathematical relationship that governs this mapping. New information about the bond dissociation energy of the C2 radical was produces. C2(b 3 Sigma g -) and C2( 1 Delta g) were detected in the photolysis of C2H via time resolved infrared emission spectroscopy. In the former case, vibrational excitation up to v'' = 4 is observed. All of the results suggest that the C2 models in comets need to consider the presence of vibrationally excited C2 radicals in comets. The laser induced fluorescence spectra of the C3 was observed as a product of the 193 nm photolysis of allene and propyne. The populations of the rotational levels are identical in both cases. This result has led us to conclude that an isomerization reaction occurs in the photolysis of propyne which leads to the same C3H2 intermediate that is formed in the photolysis of C3H4. Since the former molecule is one of the most abundant in the interstellar medium it is also likely that its precursor is also present in comets. This would explain why C3 is observed in comets.

Jackson, William M.↗
NASA NTRS1991

Permanent wire splicing by an explosive joining process

The invention is an apparatus and method for wire splicing using an explosive joining process. The apparatus consists of a prebent, U-shaped strap of metal that slides over prepositioned wires. A standoff means separates the wires from the strap before joining. An adhesive means holds two ribbon explosives in position centered over the U-shaped strap. A detonating means connects to the ribbon explosives. The process involves spreading strands of each wire to be joined into a flat plane. The process then requires alternating each strand in alignment to form a mesh-like arrangement with an overlapped area. The strap slides over the strands of the wires, and the standoff means is positioned between the two surfaces. The detonating means then initiates the ribbon explosives that drive the strap to accomplish a high velocity, angular collision between the mating surfaces. This collision creates surface melts and collision bonding results in electron sharing linkups.

Bement, Laurence J.↗
NASA NTRS1992

Interim Service ISDN Satellite (ISIS) hardware experiment design for advanced ISDN satellite design and experiments

The Interim Service Integrated Services Digital Network (ISDN) Satellite (ISIS) Hardware Experiment Design for Advanced Satellite Designs describes the design of the ISDN Satellite Terminal Adapter (ISTA) capable of translating ISDN protocol traffic into time division multiple access (TDMA) signals for use by a communications satellite. The ISTA connects the Type 1 Network Termination (NT1) via the U-interface on the line termination side of the CPE to the V.35 interface for satellite uplink. The same ISTA converts in the opposite direction the V.35 to U-interface data with a simple switch setting.

Pepin, Gerard R.↗
NASA NTRS1992

Interfacial tension measurement of immiscible liq uids using a capillary tube

The interfacial tension of immiscible liquids is an important thermophysical property that is useful in the behavior of liquids both in microgravity (Martinez et al. (1987) and Karri and Mathur (1988)) and in enhanced oil recovery processes under normal gravity (Slattery (1974)). Many techniques are available for its measurement, such as the ring method, drop weight method, spinning drop method, and capillary height method (Adamson (1960) and Miller and Neogi (1985)). Karri and Mathur mention that many of the techniques use equations that contain a density difference term and are inappropriate for equal density liquids. They reported a new method that is suitable for both equal and unequal density liquids. In their method, a capillary tube forms one of the legs of a U-tube. The interfacial tension is related to the heights of the liquids in the cups of the U-tube above the interface in the capillary. Our interest in this area arose from a need to measure small interfacial tension (around 1 mN/m) for a vegetable oil/silicon oil system that was used in a thermocapillary drop migration experiment (Rashidnia and Balasubramaniam (1991)). In our attempts to duplicate the method proposed by Karri and Mathur, we found it quite difficult to anchor the interface inside the capillary tube; small differences of the liquid heights in the cups drove the interface out of the capillary. We present an alternative method using a capillary tube to measure the interfacial tensions of liquids of equal or unequal density. The method is based on the combined capillary rises of both liquids in the tube.

Rashidnia, N.↗
NASA NTRS1991

An ab initio study of the C3(+) cation using multireference methods

The energy difference between the linear 2 sigma(sup +, sub u) and cyclic 2B(sub 2) structures of C3(+) has been investigated using large (5s3p2d1f) basis sets and multireference electron correlation treatments, including complete active space self consistent fields (CASSCF), multireference configuration interaction (MRCI), and averaged coupled-pair functional (ACPF) methods, as well as the single-reference quadratic configuration interaction (QCISD(T)) method. Our best estimate, including a correction for basis set incompleteness, is that the linear form lies above the cyclic from by 5.2(+1.5 to -1.0) kcal/mol. The 2 sigma(sup +, sub u) state is probably not a transition state, but a local minimum. Reliable computation of the cyclic/linear energy difference in C3(+) is extremely demanding of the electron correlation treatment used: of the single-reference methods previously considered, CCSD(T) and QCISD(T) perform best. The MRCI + Q(0.01)/(4s2p1d) energy separation of 1.68 kcal/mol should provide a comparison standard for other electron correlation methods applied to this system.

Taylor, Peter R.↗
NASA NTRS1992

Entropic uncertainty relation at finite temperature

We discussed how much information is lost when a particle is in equilibrium with the thermal reservoir of temperature T = 1/beta. The universal temperature correction to the r.h.s. of U(X,P:psi) greater than or = 1 + ln(pi) is determined. For this purpose, it is convenient to employ the framework of thermo-field dynamics (TFD). This formulation of finite-temperature (T not = 0) quantum theory utilizes the doubled Hilbert space, the normal operator (A) acting on the objective space, and its corresponding tildian operator on the fictitious space. The physical probability density associated with the measurement of the normal operator, A, is given, and the information entropy at T not = 0 is defined. The results describe how the thermal disturbance effects in S sub X or S sub P (delta X or delta P) can be suppressed by squeezing with keeping U = S sub X + S sub P (delta X x delta P) its minimum value.

Abe, Sumiyoshi↗
NASA NTRS1992

Interim Service ISDN Satellite (ISIS) hardware experiment development for advanced ISDN satellite designs and experiments

The Interim Service Integrated Service Digital Network (ISDN) Satellite (ISIS) Hardware Experiment Development for Advanced Satellite Designs describes the development of the ISDN Satellite Terminal Adapter (ISTA) capable of translating ISDN protocol traffic into Time Division Multiple Access (TDMA) signals for use by a communications satellite. The ISTA connects the Type 1 Network Termination (NT1) via the U-interface on the line termination side of the CPE to the RS-499 interface for satellite uplink. The same ISTA converts in the opposite direction the RS-499 to U-interface data with a simple switch setting.

Pepin, Gerard R.↗
NASA NTRS1992

Relativistic Coulomb Fission

Nuclear fission reactions induced by the electromagnetic field of relativistic nuclei are studied for energies relevant to present and future relativistic heavy ion accelerators. Cross sections are calculated for U-238 and Pu-239 fission induced by C-12, Si-28, Au-197, and U-238 projectiles. It is found that some of the cross sections can exceed 10 b.

Norbury, John W.↗
NASA NTRS1992

Magnetic flux relaxation in YBa2Cu3O(7-x) thin film: Thermal or athermal

The magnetic flux relaxation behavior of YBa2Cu3O(7-x) thin film on LaAlO3 for H parallel c was studied in the range of 4.2-40 k and 0.2-1.0 T. Both the normalized flux relaxation rate (S) and the net flux pinning energy (U) increase continuously from 1.3 x 10 exp -2 to 3.0 x 10 exp -2 and from 70-240 meV respectively, as the temperature (T) increases from 10 to 40 K. This behavior is consistent with the thermally activated flux motion model. At low temperatures, however, S is found to decrease much more slowly as compared with kT, in contradiction to the thermal activation model. This behavior is discussed in terms of the athermal quantum tunneling of flux lines. The magnetic field dependence of U, however, is not completely understood.

Vitta, Satish↗
NASA NTRS1991

High-speed multicolor photometry of V834 Centaurus

Results are presented of high-speed photometric observations of the Am Her object, V834 Centaurus which, during its high state, revealed the 0.3-0.9 Hz quasi-period oscillations (QPOs) with rms amplitudes of 3.3 +/-1.1 percent and 2.5 +/-0.8 percent in the V and R bands, respectively, while the U-band amplitude was consistent with zero on one night but was 2.5 +/-1.2 percent on the following night. The QPOs in the B band were always consistent with zero. The data were obtained on the nights of June 16-21, 1990, when the average V magnitude of V834 Cen was about 15.3, confirming the high-luminosity state. The dominance of the QPOs by V-band emission is in contrast to earlier studies by Larsson which found that the QPOs were dominated by emission in the B and R band, depending upon the luminosity state of V834 Cen. In all cases, the QPOs of V834 have frequencies of 0.3-0.9 Hz. It is inferred that the color of the QPOs could be highly variable between luminosity states and may be variable in the U band within the high-luminosity state.

Middleditch, John↗
NASA NTRS1991

Radioactive dating of the elements

The extent to which an accurate determination of the age of the Galaxy, and thus a lower bound on the age of the universe, can be obtained from radioactive dating is discussed. Emphasis is given to the use of the long-lived radioactive nuclei Re-187, Th-232, U-238, and U-235. The nature of the production sites of these and other potential Galactic chronometers is examined along with their production ratios. Age determinations from models of nucleocosmochronology are reviewed and compared with age determination from stellar sources and age constraints form cosmological considerations.

Cowan, John J.↗
NASA NTRS1991

The particle size of Martian aeolian dunes

The effective particle size of unconsolidated materials on the Martian surface can be determined from thermal inertia, due to a pore size dependence of thermal conductivity at Martian atmospheric pressures. Because dunes consist of a narrow range of well-sorted, unconsolidated particles, they provide for a test of the relationship between particle size and thermal inertia calculated from midinfrared emission data for the Martian surface. Two independent approaches are used. First, thermal inertia data indicate that Martian dunes have an average particle size of about 500 +/-100 microns, or medium to coarse sand. Second, expected dune particle sizes are determined from grain trajectory calculations and the particle size transition from suspension to saltation. On earth, the transition occurs for a grain when the ratio of the terminal fall velocity to the wind friction speed, u*(t) is near unity; for grains at u*(t) this occurs at about 52 microns. Terrrestrial dune sands have a mean of 250 microns and are composed entirely of grains greater than 52 microns. The corresponding Martian transition grain size is about 210 microns, suggesting that Martian dunes should be significantly coarser than terrestrial dunes. Grain saltation path length as a function of particle size also shows that, under Martian conditions, larger grains than on earth will become suspended. Both approaches indicate that Martian dune sand should be coarser than terrestrial dune sand. These results closely match the grain sizes determined from thermal inertia models, providing the first direct test of the validity of these models for actual Martian surface materials.

Edgett, Kenneth S.↗
NASA NTRS1992

Low-Reynolds-number effects in a fully developed turbulent channel flow

Low-Reynolds-number effects are observed in the inner region of a fully developed turbulent channel flow, using data obtained either from experiments or by direct numerical simulations. The Reynolds-number influence is observed on the turbulence intensities and to a lesser degree on the average production and dissipation of the turbulent energy. In the near-wall region, the data confirm Wei and Willmarth's (1989) conclusion that the Reynolds stresses do not scale on wall variables. One of the reasons proposed to account for this behavior, namely, the 'geometry' effect or direct interaction between inner regions on opposite walls, was investigated in some detail by introducing temperature at one of the walls, both in experiment and simulation. Although the extent of penetration of thermal excursions into the opposite side of the channel can be significant at low Reynolds numbers, the contribution these excursions make to the Reynolds shear stress and the spanwise vorticity in the opposite wall region is negligible. In the inner region, spectra and cospectra of the velocity fluctuations u and v change rapidly with the Reynolds number, the variations being mainly confined to low wavenumbers in the u spectrum.

Antonia, R. A.↗
NASA NTRS1992

Direct numerical simulation of instabilities in parallel flow with spherical roughness elements

Results from a direct numerical simulation of laminar flow over a flat surface with spherical roughness elements using a spectral-element method are given. The numerical simulation approximates roughness as a cellular pattern of identical spheres protruding from a smooth wall. Periodic boundary conditions on the domain's horizontal faces simulate an infinite array of roughness elements extending in the streamwise and spanwise directions, which implies the parallel-flow assumption, and results in a closed domain. A body force, designed to yield the horizontal Blasius velocity in the absence of roughness, sustains the flow. Instabilities above a critical Reynolds number reveal negligible oscillations in the recirculation regions behind each sphere and in the free stream, high-amplitude oscillations in the layer directly above the spheres, and a mean profile with an inflection point near the sphere's crest. The inflection point yields an unstable layer above the roughness (where U''(y) is less than 0) and a stable region within the roughness (where U''(y) is greater than 0). Evidently, the instability begins when the low-momentum or wake region behind an element, being the region most affected by disturbances (purely numerical in this case), goes unstable and moves. In compressible flow with periodic boundaries, this motion sends disturbances to all regions of the domain. In the unstable layer just above the inflection point, the disturbances grow while being carried downstream with a propagation speed equal to the local mean velocity; they do not grow amid the low energy region near the roughness patch. The most amplified disturbance eventually arrives at the next roughness element downstream, perturbing its wake and inducing a global response at a frequency governed by the streamwise spacing between spheres and the mean velocity of the most amplified layer.

Deanna, R. G.↗
NASA NTRS1992

Propagation velocity and space-time correlation of perturbations in turbulent channel flow

A database obtained from direct numerical simulation of a turbulent channel flow is analyzed to extract the propagation velocity V of velocity, vorticity, and pressure fluctuations from their space-time correlations. A surprising result is that V is approximately the same as the local mean velocity for most of the channel, except for the near-wall region. For y(+) is less than or equal to 15, V is virtually constant, implying that perturbations of all flow variables propagate like waves near the wall. In this region V is 55 percent of the centerline velocity U(sub c) for velocity and vorticity perturbations and 75 percent of U(sub c) for pressure perturbations. Scale-dependence of V is also examined by analyzing the bandpass filtered flow fields. Comprehensive documentation of the propagation velocities and space-time correlation data, which should prove useful in the evaluation of Taylor's hypothesis is presented. An attempt was made to explain some of the data in terms of our current understanding of organized structures, although not all of the data can be explained this way.

Kim, John↗
NASA NTRS1992

The structure of particle cloud premixed flames

The structure of premixed flames propagating in combustible systems containing uniformly distributed volatile fuel particles in an oxidizing gas mixture is analyzed. This analysis is motivated by experiments conducted at NASA Lewis Research Center on the structure of flames propagating in combustible mixtures of lycopodium particles and air. Several interesting modes of flame propagation were observed in these experiments depending on the number density and the initial size of the fuel particle. The experimental results show that steady flame propagation occurs even if the initial equivalence ratio of the combustible mixture based on the gaseous fuel available in the particles, phi sub u, is substantially larger than unity. A model is developed to explain these experimental observations. In the model, it is presumed that the fuel particles vaporize first to yield a gaseous fuel of known chemical composition which then reacts with oxygen in a one-step overall process. The activation energy of the chemical reaction is presumed to be large. The activation energy characterizing the kinetics of vaporization is also presumed to be large. The equations governing the structure of the flame were integrated numerically. It is shown that the interplay of vaporization kinetics and oxidation process can result in steady flame propagation in combustible mixtures where the value of phi sub u is substantially larger than unity. This prediction is in agreement with experimental observations.

Seshadri, K.↗