Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transmission Electron Microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Effect of hydration on morphology of thin phosphonate block copolymer electrolyte membranes studied by electron tomography

The morphological changes of phosphonate polypeptoid electrolyte membranes, poly-N-(2-ethyl)hexylglycine-block-poly-N-phosphonomethylglycine (pNeh m -b-pNpm n ), in hydrated and dry states were characterized by cryogenic transmission electron microscopy (cryo-TEM) and cryogenic electron tomography (cryo-ET). The analysis of 3D tomograms revealed that the pNeh 9 -b-pNpm 9 thin films absorbed a large amount of water, resulting in the formation of membranes that were nearly flat and giant multicompartment vesicles dispersed in the water phase. A simple lamellar phase appeared when the films were dried. In contrast, pNeh 18 -b-pNpm 18 thin films absorbed little water and formed small highly curved unilamellar and multilamellar vesicles. Water was located mainly outside the closely-packed vesicles. When water was removed by drying, the walls of adjacent vesicles collapsed to form honeycomb-like capsules. Here, the changes in domain size reflected changes in chain conformations. The pNpm9 blocks were saturated by water and fully extended, while pNpm 18 blocks were neither saturated by water nor fully extended. In addition, the thicknesses of hydrophobic blocks in the hydrated films of both pNeh 9 -b-pNpm 9 and pNeh 18 -b-pNpm 18 were smaller than those in the dry films, reflecting an increase of the average distance between the neighboring junctions of polypeptoid molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Molecular beam epitaxy and crystal structure of majority a -plane-oriented and substrate-strained Mn 3 Sn thin films grown directly on sapphire (0001)

The Kagome antiferromagnet Mn 3 Sn has garnered much attention due to the presence of exciting properties such as anomalous Hall and Nernst effects. This paper discusses the synthesis of crystalline Mn 3 Sn thin films, prepared on Al 2 O 3 (0001) substrates at 453 ± 5°C using molecular beam epitaxy. The growth is monitored in situ using reflection high energy electron diffraction and measured ex situ using x-ray diffraction, Rutherford back-scattering, and cross-sectional scanning transmission electron microscopy. Our analysis shows the in-plane lattice constants of a 1,M = 4.117 ± 0.027 Å and a 2,M = 4.943 ± 0.033 Å, which is a very unexpected result when compared to the bulk a-plane Mn 3 Sn. This indicates a strain in the film and makes it challenging to provide a straightforward explanation. In an effort to explain our results, we discuss two possible orientation relationships between the Mn 3 Sn films and the sapphire substrates. Samples prepared under these conditions appear to have smooth surfaces locally, but overall the film has a 3D island morphology. First-principles calculations provide atomic models of the Mn 3 Sn (112¯0) lattice on Al 2 O 3 (0001) high symmetry sites, indicating that the L3-R90° is the most stable configuration. A detailed discussion of the experimental data and theoretical results, as well as strain effects, is provided.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Formation of distinctive nanostructured metastable polymorphs mediated by kinetic transition pathways in germanium

High-pressure β -Sn germanium may transform into diverse metastable allotropes with distinctive nanostructures and unique physical properties via multiple pathways under decompression. However, the mechanism and transition kinetics remain poorly understood. Here, we investigate the formation of metastable phases and nanostructures in germanium via controllable transition pathways of β -Sn Ge under rapid decompression at different rates. High-resolution transmission electron microscopy reveals three distinct metastable phases with the distinctive nanostructures: an almost perfect st12 Ge crystal, nanosized bc8/r8 structures with amorphous boundaries, and amorphous Ge with nanosized clusters (0.8–2.5 nm). Fast in situ x-ray diffraction and x-ray absorption measurements indicate that these nanostructured products form in certain pressure regions via distinct kinetic pathways and are strongly correlated with nucleation rates and electronic transitions mediated by compression rate, temperature, and stress. This work provides deep insight into the controllable synthesis of metastable materials with unique crystal symmetries and nanostructures for potential applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Precursor Identity and Surfactant Concentration Influence Shape of UO 2 Nanoparticles

A fundamental step toward studying the unique properties of actinide nanomaterials is control over the shape of actinide nanoparticles. Toward this goal, this work demonstrates the effects of precursor identity and surfactant concentration on the shape of uranium dioxide (UO 2 ) nanoparticles. UO 2 nanoparticles were synthesized by thermal decomposition of different precursors in the presence of oleylamine and oleic acid as surfactants. The size, shape, phase, and chemical composition of the nanoparticles was evaluated using transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), electron diffraction (ED), and U L 3 -edge X-ray absorption fine-structure (XAFS) spectroscopy. Anisotropic UO 2 nanocubes of ∼ 4 nm were obtained only with low surfactant concentrations, while increasing the surfactant concentration resulted in formation of nanoparticles with an isotropic, sphere morphology. The importance of precursor identity was also investigated by employing U(hfa) 4 , U(acac) 4 , UO 2 (acac) 2 , and UO 2 (hfa) 2 ·H 2 O (where hfa = hexafluoracetylacetone and acac = acetylacetone) as precursors. The nanocube morphology was only observed when U(hfa) 4 was used as a precursor. XAS allowed for comparison of the disorder in anisotropic vs isotropic UO 2 nanoparticles.

Nanocubes↗
DOE OSTI2025

Defect-Driven Redox Interplay on Anatase TiO 2 : Surface-Structure Dependent Activation for CO 2 Hydrogenation Catalysis

Titanium dioxide (TiO 2 ) is one of the most extensively studied oxides as an active catalyst or catalyst support, particularly in energy and environmental applications, but the atomistic mechanisms governing its dynamic response to reactive environments and their correlation to reactivity remain largely elusive. Using in situ environmental transmission electron microscopy (ETEM), synchrotron X-ray diffraction (XRD), ambient-pressure X-ray photoelectron spectroscopy (AP-XPS), temperature-programmed reduction (TPR), reactivity measurements, and theoretical modeling, we reveal the dynamic interplay between oxygen loss and replenishment of anatase TiO 2 under varying reactive conditions. Under H 2 exposure, anatase TiO 2 undergoes surface reduction via lattice oxygen loss, forming Ti 3 O 5 . In contrast, CO 2 exposure induces oxygen replenishment, reversing stoichiometry. In mixed H2/CO 2 environments, the reverse water–gas shift (RWGS) reaction proceeds selectively on stepped and high-indexed TiO 2 surfaces, whereas the thermodynamically stable TiO 2 (101) surface remains inactive and intact. Critically, H 2 pretreatment generates oxygen vacancies on TiO 2 (101), transforming it into an active Ti 3 O 5 or defect-rich surface that catalyzes RWGS. By correlating surface structure, defect dynamics, and gas-phase interactions, this work deciphers the competition between H 2 -driven reduction and CO 2 -driven oxidation pathways at the atomic scale. Furthermore, these insights establish defect engineering as a strategic lever to activate inert TiO 2 facets, advancing the design of adaptive catalysts for sustainable fuel synthesis technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2023

In situ observation of medium range ordering and crystallization of amorphous TiO 2 ultrathin films grown by atomic layer deposition

The evolution of medium range ordering (MRO) and crystallization behavior of amorphous TiO 2 films grown by atomic layer deposition (ALD) were studied using in situ four-dimensional scanning transmission electron microscopy. The films remain fully amorphous when grown at 120 °C or below, but they start showing crystallization of anatase phases when grown at 140 °C or above. The degree of MRO increases as a function of temperature and maximizes at 140 °C when crystallization starts to occur, which suggests that crystallization prerequires the development of nanoscale MRO that serves as the site of nucleation. In situ annealing of amorphous TiO 2 films grown at 80 °C shows enhancement of MRO but limited number of nucleation, which suggests that post-annealing develops only a small portion of MRO into crystal nuclei. The MRO regions that do not develop into crystals undergo structural relaxation instead, which provides insights into the critical size and degree of ordering and the stability of certain MRO types at different temperatures. In addition, crystallographic defects were observed within crystal phases, which likely negate corrosion resistance of the film. Our result highlights the importance of understanding and controlling MRO for optimizing ALD-grown amorphous films for next-generation functional devices and renewable energy applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Unsupervised machine learning discovery of structural units and transformation pathways from imaging data

We show that unsupervised machine learning can be used to learn chemical transformation pathways from observational Scanning Transmission Electron Microscopy (STEM) data. To enable this analysis, we assumed the existence of atoms, a discreteness of atomic classes, and the presence of an explicit relationship between the observed STEM contrast and the presence of atomic units. With only these postulates, we developed a machine learning method leveraging a rotationally invariant variational autoencoder (VAE) that can identify the existing molecular fragments observed within a material. The approach encodes the information contained in STEM image sequences using a small number of latent variables, allowing the exploration of chemical transformation pathways by tracing the evolution of atoms in the latent space of the system. The results suggest that atomically resolved STEM data can be used to derive fundamental physical and chemical mechanisms involved, by providing encodings of the observed structures that act as bottom-up equivalents of structural order parameters. The approach also demonstrates the potential of variational (i.e., Bayesian) methods in the physical sciences and will stimulate the development of more sophisticated ways to encode physical constraints in the encoder–decoder architectures and generative physical laws and causal relationships in the latent space of VAEs.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Finding simplicity: unsupervised discovery of features, patterns, and order parameters via shift-invariant variational autoencoders *

Abstract Recent advances in scanning tunneling and transmission electron microscopies (STM and STEM) have allowed routine generation of large volumes of imaging data containing information on the structure and functionality of materials. The experimental data sets contain signatures of long-range phenomena such as physical order parameter fields, polarization, and strain gradients in STEM, or standing electronic waves and carrier-mediated exchange interactions in STM, all superimposed onto scanning system distortions and gradual changes of contrast due to drift and/or mis-tilt effects. Correspondingly, while the human eye can readily identify certain patterns in the images such as lattice periodicities, repeating structural elements, or microstructures, their automatic extraction and classification are highly non-trivial and universal pathways to accomplish such analyses are absent. We pose that the most distinctive elements of the patterns observed in STM and (S)TEM images are similarity and (almost-) periodicity, behaviors stemming directly from the parsimony of elementary atomic structures, superimposed on the gradual changes reflective of order parameter distributions. However, the discovery of these elements via global Fourier methods is non-trivial due to variability and lack of ideal discrete translation symmetry. To address this problem, we explore the shift-invariant variational autoencoders (shift-VAEs) that allow disentangling characteristic repeating features in the images, their variations, and shifts that inevitably occur when randomly sampling the image space. Shift-VAEs balance the uncertainty in the position of the object of interest with the uncertainty in shape reconstruction. This approach is illustrated for model 1D data, and further extended to synthetic and experimental STM and STEM 2D data. We further introduce an approach for training shift-VAEs that allows finding the latent variables that comport to known physical behavior. In this specific case, the condition is that the latent variable maps should be smooth on the length scale of the atomic lattice (as expected for physical order parameters), but other conditions can be imposed. The opportunities and limitations of the shift VAE analysis for pattern discovery are elucidated.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Capturing the softening in T91 steel annealed with molten LBE through interfacial gradient plasticity

In order to study the effect of annealing with molten lead–bismuth eutectic alloy (mLBE) on the mechanical properties of T91 steel, micropillar compression tests were analyzed through the consideration of mechanical interface energy terms within gradient plasticity. The stress–strain curves of the micropillars showed significant stochastic effects, characterized by a different elastic and plastic behavior response for each pillar. Among the various pillars, some exhibited a similar trilinear behavior. Scanning electron microscopy (SEM) images of these specimens demonstrated localized slip deformation and slip planes after compression, while transmission electron microscopy (TEM) images showed the presence of a severe slip zone along the random grain boundaries (RGBs), indicating that the GBs played a dominant role in the deformation/slip. By employing interfacial gradient plasticity that can explicitly account for the presence of GBs, the trilinear response was captured, allowing for the determination of the mechanical interface parameter. As anticipated the pillars which underwent severe slip at the GBs had a lower value for the mechanical interface parameter. Finally, annealing with mLBE can, therefore, in some cases result in softening in the overall stress–strain, as it lowers the mechanical interface energy of GBs.

36 MATERIALS SCIENCE↗
NASA NTRS1983

Observation of defects in mercury cadmium telluride crystals grown by chemical vapor transport

A mixture of nitric and hydrochloric acids was found to yield etch pits on mercury cadmium telluride crystals grown by chemical vapor transport using iodine or mercuric iodide as the transport agent. Two types of pits were observed by optical microscopy: triangular pyramidal and round saucer shaped pits. Transmission electron microscopy confirmed that two types of defects were present: dislocations and second phase occlusions. The present study suggests that the defects are near the crystal surface and therefore will probably not significantly affect the electrical characteristics.

Irene, E. A.↗
NASA NTRS1988

Superconductivity in the high-Tc Bi-Ca-Sr-Cu-O system - Phase identification

Four phases are observed in superconducting Bi-Ca-Sr-Cu-O samples. The superconducting phase, with onset temperature near 120 K, is a 15.4-A-layered compound with composition near Bi2Ca1Sr2Cu2O9 and an A-centered orthorhombic unit subcell 5.41 x 5.44 x 30.78 A. X-ray diffraction and electron microscopy data are consistent with a structure of alternating perovskite and Bi2O2 layers. High-resolution transmission electron microscopy images reveal a b-axis superstructure of 27.2 A, numerous (001) stacking faults, and other defects.

Hazen, R. M.↗
NASA NTRSDate not supplied

Contamination, Transportation or Transmutation in LENR Material Analyses

LENR experiments using various loading and triggering mechanisms rely on a variety of elemental and isotopic assays to determine LENR effects. These assays include optical microscopy, Scanning Electron Microscopy with Energy Dispersive X-Ray Analysis (SEM/EDX), X-Ray Photoelectron Spectroscopy (XPS) and Transmission Electron Microscopy (TEM). All of these methods observe the surface of a material. By dissolving or vaporizing the sample, Inductively Coupled Plasma Optical Element Spectroscopy (ICP-OES) can determine elemental composition (ppb) or with mass spectroscopy, isotopes (ICP/MS). One can use a focused ion beam (FIB) to cut open a sample and observe the “cut” with either SEM/EDX, or Time-of-Flight Secondary Ion Mass Spectroscopy (TOF-SIMS). High Purity Gamma Ray Spectroscopy (HPGe) and alpha/ beta Liquid Scintillator spectroscopy can be used. We’ve employed these assay methods in our NASA GRC research under both the Advanced Energy Conversion and Lattice Confinement Fusion Projects. However, there are limitations associated with each of these methods ranging from handling contamination, instrumental limitations including sensitivity and field of view, and sample preparation.

Low Energy Nuclear Reactions↗
DOE OSTI2022

Multi-Modal Characterization of Nuclear Fuels and Materials at the Idaho National Laboratory Materials & Fuels Complex

The Idaho National Laboratory (INL) leads cutting-edge research pertaining to the advancement of nuclear reactor technologies, including nuclear fuels and materials. The INL Irradiated Materials Characterization Laboratory (IMCL), Electron Microscopy Laboratory (EML), and future Sample Preparation Laboratory (SPL) are available to the nuclear research community to assess the behavior of nuclear fuels and materials, efficiently and comprehensively characterizing from the engineering to atomistic scale. The IMCL is a unique, 12,000-square-foot facility located at the INL Materials and Fuels Complex designed for analysis of irradiated materials. The facility operates advanced characterization instruments that are sensitive to vibration, temperature, and electromagnetic interference in modular radiological shielding and confinement systems, granting researchers the ability to assess the microstructural, chemical, mechanical and thermophysical properties of nuclear materials, especially irradiated fuels. The EML is dedicated to advanced characterization of materials with optical and electron microscopy tools, including scanning electron microscopy/focused-ion beam (SEM/FIB) and transmission electron microscopy (TEM). Upon construction, the SPL will be a 3 story, 49,000 sq. ft facility, that is the most modern reactor structural materials testing and analysis facility in the world, designed to investigate reactor structural materials in support of life-extension programs and development of advanced reactor concepts, including mechanical testing and advanced characterization capabilities. This presentation will showcase some of the main capabilities available at both IMCL, EML, and SPL, specifically illustrating how these characterization techniques are incorporated into multi-modal characterization work scopes to elucidate the degradation of nuclear structural materials and irradiated fuels.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A comparison of carbon impurities in pre- and post-melt uranium Part 2: Scanning/Transmission electron microscopy analysis

We report the speciation and morphology of U carbide inclusions in pre- and post-melt U metal have been explored using high-resolution analytical electron microscopy (AEM). This report presents Part 2 of our study, in which aberration (C s ) corrected transmission and scanning transmission electron microscopy (S)TEM was used to elementally and crystallographically characterize C-containing impurities and defect features in U samples for comparison with results obtained by scanning electron microscopy (SEM) in Part 1, previously published by this journal. Elemental mapping and unit cell matching of inclusions by (S)TEM are consistent with phases observed by SEM, and new dislocations can be observed associating with some inclusion morphologies and not others.

36 MATERIALS SCIENCE↗
DOE OSTI2026

4D-STEM Coupled with Unsupervised Machine Learning to Reveal at Large-Scale the Microstructural Evolution in Li- and Mn-Rich Cathodes

Li- and Mn-rich (LMR) layered oxides are known to exhibit a thin surface reconstruction layer, which grows during electrochemical cycling in a manner that depends on exposed crystallographic facets, cycling conditions, and electrolyte chemistry. Direct characterization of this layer has traditionally relied on high-resolution electron microscopy, which is inherently limited to small fields of view. Here, we employ four-dimensional scanning transmission electron microscopy (4D-STEM) combined with unsupervised machine-learning clustering to quantitatively map phase distributions over large areas and track their evolution in LMR cathodes during electrochemical aging. Our results show that the surface reconstruction layer consists predominantly of a rocksalt phase, whose thickness varies across different facets following activation cycling and becomes substantially thicker and more uniform during calendar aging. In contrast, a spinel-like phase is observed within the particle bulk. Large-area phase mapping and correlative high-resolution imaging reveal that this spinel-like phase preferentially nucleates at bulk crystallographic defects, including boundaries between 60°-rotated layered domains and associated mixed-phase regions, rather than exclusively at the particle surface. Our findings establish a mechanistic distinction between surface-driven rocksalt formation and bulk-defect-mediated spinel nucleation while demonstrating the unique capability of 4D-STEM to provide statistically robust, mesoscale insight into complex phase-evolution processes in LMR cathodes.

4D-STEM↗
NASA NTRS2007

Multifunctional, High-Temperature Nanocomposites

In experiments conducted as part of a continuing effort to incorporate multifunctionality into advanced composite materials, blends of multi-walled carbon nanotubes and a resin denoted gPETI-330 h (wherein gPETI h is an abbreviation for gphenylethynyl-terminated imide h) were prepared, characterized, and fabricated into moldings. PETI-330 was selected as the matrix resin in these experiments because of its low melt viscosity (<10 poise at a temperature of 280 C), excellent melt stability (lifetime >2 hours at 280 C), and high temperature performance (>1,000 hours at 288 C). The multi-walled carbon nanotubes (MWCNTs), obtained from the University of Kentucky, were selected because of their electrical and thermal conductivity and their small diameters. The purpose of these experiments was to determine the combination of thermal, electrical, and mechanical properties achievable while still maintaining melt processability. The PETI-330/MWCNT mixtures were prepared at concentrations ranging from 3 to 25 weight-percent of MWCNTs by dry mixing of the constituents in a ball mill using zirconia beads. The resulting powders were characterized for degree of mixing and thermal and rheological properties. The neat resin was found to have melt viscosity between 5 and 10 poise. At 280 C and a fixed strain rate, the viscosity was found to increase with time. At this temperature, the phenylethynyl groups do not readily react and so no significant curing of the resin occurred. For MWCNT-filled samples, melt viscosity was reasonably steady at 280 C and was greater in samples containing greater proportions of MWCNTs. The melt viscosity for 20 weightpercent of MWCNTs was found to be .28,000 poise, which is lower than the initial estimated allowable maximum value of 60,000 poise for injection molding. Hence, MWCNT loadings of as much as 20 percent were deemed to be suitable compositions for scale-up. High-resolution scanning electron microscopy (HRSEM) showed the MWCNTs to be well dispersed in the polymer matrices, while high-resolution transmission electron microscopy shows splits in the walls of the MWCNTs but no catastrophic breakage of tubes. To further assess processing characteristics prior to scale-up, samples containing 10, 15, and 20 weight-percent of MWCNTs were processed through a laboratory melting extruder. HRSEM of the extruded fibers shows significant alignment of MWCNTs in the flow direction (see figure). For the samples containing 20 weight-percent of MWCNTs, difficulties were encountered during feeding, and the temperature of a rotor in the extruder rose to 245 C because of buildup of frictional heat; this indicates that materials of this type having MWCNT concentrations .20 weight- percent may not be melt-processable. On the basis of the results from the foregoing characterizations, samples containing 10, 15, and 20 weight-percent of MWCNTs were scaled up to masses of .300 g and used to make specimens having dimensions of 10.2 by 15.2 by 0.32 cm. These specimens were molded by (1) injecting the mixtures, at temperatures between 260 and 280 C, into a tool made of the low-thermal-expansion alloy InvarR and then (2) curing for 1 hour at 371 C. The tool was designed to impart shear during the injection process in an attempt to achieve some alignment of the MWCNTs in the flow direction.

Connell, John W.↗
DOE OSTI2024

Relationship between molecular structure and corrugations in self-assembled polypeptoid nanosheets revealed by cryogenic electron microscopy

Designing conformationally dynamic molecules that self-assemble into predictable nanostructures remains an important unmet challenge. This paper describes how atomic-scale cryogenic transmission electron microscopy (cryo-TEM) can be used to explore the relationship between molecular structure and self-assembly of block copolymers. We examined sheetlike micelles formed in water using a series of diblock copolypeptoids with the same hydrophilic block and three distinct crystalline hydrophobic blocks. Our cryo-TEM images revealed all the structures share nansoscale features, but differ in their intermolecular packing geometries. Different molecular arrangements, parallel and antiparallel V-shaped crystal motifs, were revealed by two-dimensional atomic-scale through-plane images. However, images from tilted samples revealed an unexpected feature when the hydrophobic polypeptoid block comprised phenyl rings with substituted bromine atoms at the para position. The nanosheets contained atomic-scale corrugations that were absent in the other systems which comprised unsubstituted aliphatic and aromatic side chains. We hypothesize that these corrugations are due to the dipolar characteristics of the brominated phenyl group and interactions between this group and water molecules. Published by the American Physical Society 2024

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of CMAS viscosity on the infiltration depth in thermal barrier coatings of different microstructures

Calcium magnesium aluminum silicate (CMAS) is one of the leading concerns for the gas turbine industry. The effects of CMAS viscosity and the coating microstructure on CMAS infiltration depth were explored by conducting a time dependent interaction study. Three CMAS compositions were used from literature, and their viscosities predicted through FactSage viscosity module were drastically different. The interaction was carried out on three different TBCs synthesized using the solution precursor plasma spray process (SPPS): two of the TBCs were made of yttrium aluminum garnet (YAG) having different microstructures that promote different modes of CMAS infiltration, and one TBC was made of gadolinium zirconate (GZO). All samples had stress relieving vertical cracks and different intensities of horizontally banded porosity, (inter pass boundaries IPBs). A concentration of 100 mg/cm 2 of CMAS was applied on the TBCs which were then subjected to a 5-minute interaction at 1300 °C. Samples were analyzed using scanning electron microscopy (SEM), electron dispersive X-ray spectroscopy (EDXS), and transmission electron microscopy (TEM). Low viscosity CMAS readily penetrated the TBCs while more viscous CMAS showed less penetration. The depth of CMAS infiltration depended on the coating microstructure. In the YAG with IPBs, the CMAS spread horizontally in the IPBs before infiltrating deeper, resulting in reduced infiltration depth compared to other samples in spite of having wider vertical cracks. TEM and EDXS analysis were performed to investigate the phases present in the CMAS-TBC interaction region in YAG. Two regions were chosen, the top TBC surface in direct contact with the sea of CMAS, and the region at the CMAS penetration ended within the coating. Finally, the results showed that no secondary phases like apatite were observed in YAG, thus it can be concluded that the arrest of CMAS happened solely because of CMAS viscosity and the short infiltration time.

36 MATERIALS SCIENCE↗