Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transitional flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Experimental and analytical investigation of 0 G condensation in a mechanical refrigeration system application

Basic equations of momentum and energy are presented and discussed with respect to heat transfer and pressure drop for forced flow condensation in horizontal tubes under 1-g and 0-g conditions. Some experimental results are presented for condensing refrigerant-12 in a system of three parallel-connected quartz tubes (3-mm inside diameter, G = 1.037 to 3.456 x 105 lbm/hr-sq. ft). From high speed photographs, measurements were obtained of film thickness, phase velocities, disturbance wavelengths, and flow regimes and their transitions. Based upon these measurements various dimensionless force ratios (flow and instability parameters) were calculated. Under 0-g conditions a uniformly thick redistribution of liquid condensate about the tube walls was found to result in a lowered heat transfer coefficient as compared with 1-g conditions, based upon fundamental heat transfer theory. A model is proposed that takes into account the difference in heat transfer due to condensate distribution under 1-g and 0-g conditions.

Keshock, E. G.↗
NASA NTRS1985

Hypersonic aerothermodynamics status report

This survey paper gives an overview of NASA's Aerothermodynamics program. The purpose is to present the elements of, example results from, and projected technology needs for hypersonic fluid and thermal physics. The NASA program is focused on improving the fundamental understanding of aerodynamic and aerothermodynamic flow phenomena over hypersonic vehicles operating in the continuum, transitional, and free molecule flow regime. Vehicle design capabilities, computational fluid dynamics, computational chemistry, turbulence modeling, aerothermal loading, Shuttle Orbiter flight data analysis, and aerothermal facilities are discussed.

Graves, R. A., Jr.↗
NASA NTRS1981

Three-dimensional instability of plane channel flows at subcritical Reynolds numbers

A three-dimensional instability that predicts subcritical transition in plane channel flows in good agreement with experiment is discussed. Both full simulations of the Navier-Stokes equations and a three-dimensional linear analysis about two-dimensional finite amplitude states confirm that two-dimensional secondary flows are strongly unstable to small three-dimensional perturbations.

Orszag, S. A.↗
NASA NTRSDate not supplied

Effect of Roughness on Transition on the BOLT-1a Geometry in Supersonic Flow

Infrared thermography measurements on an 8.8% scale BOLT-1a model were made in the NASA Langley Probe Calibration Tunnel for freestream unit Reynolds numbers from 7.7 × 10^ -6 /m to 30.7 × 10^ -6 /m, a freestream Mach number of 3.5, and nominal angle of attack of 0 degrees. The model was printed from polycarbonate and tested before and after fine-grit sanding to evaluate the effect of surface roughness on transition. Global surface roughness measurements were obtained using a 3D optical profilometer. The temperature distributions on the upper and lower experimental surfaces of the test article were simultaneously captured using two infrared cameras. Prior to testing, the facility’s freestream environment was characterized. At a freestream unit Reynolds number of approximately 17 × 10^ -6 /m, the nozzle-wall boundary layer began to transition non-uniformly, inducing transition on the model. The boundary-layer state was determined by analyzing Stanton number distributions computed from the surface temperature measurements. The present supersonic conditions that were examined on BOLT-1a were found to display both similarities and disparities in comparison to previous hypersonic experiments.

boundary layer transition↗
NASA NTRS1987

Studies of vortex dominated flows; Proceedings of the Symposium, Hampton, VA, July 9-11, 1985

Papers are presented on waves and bifurcations in vortex filaments, a ring-vortex representation of an axisymmetric vortex sheet, and comparison of experiment with the dynamics of the von Karman vortex trail. Also considered are force-free and loss-free transitions between vortex flow states, a vortex breakdown simulation based on a nonlinear inviscid method, and the prediction of highly vortical flows using an Euler equation model. Other topics include the theory of high-Reynolds-number flow past a blunt body, progress on the calculation of large-scale separation at high Reynolds numbers, and viscous-inviscid interaction solvers and computation of highly separated flows. Papers are also presented on simulation studies of vortex dynamics of a leading edge vortex flap, methods for numerical simulation of leading edge vortex flow, and comparison of measured and computed pitot pressures in a leading edge vortex from a delta wing.

Hussaini, M. Y.↗
NASA NTRS1991

An evaluation of three two-dimensional computational fluid dynamics codes including low Reynolds numbers and transonic Mach numbers

Full-potential, Euler, and Navier-Stokes computational fluid dynamics (CFD) codes were evaluated for use in analyzing the flow field about airfoils sections operating at Mach numbers from 0.20 to 0.60 and Reynolds numbers from 500,000 to 2,000,000. The potential code (LBAUER) includes weakly coupled integral boundary layer equations for laminar and turbulent flow with simple transition and separation models. The Navier-Stokes code (ARC2D) uses the thin-layer formulation of the Reynolds-averaged equations with an algebraic turbulence model. The Euler code (ISES) includes strongly coupled integral boundary layer equations and advanced transition and separation calculations with the capability to model laminar separation bubbles and limited zones of turbulent separation. The best experiment/CFD correlation was obtained with the Euler code because its boundary layer equations model the physics of the flow better than the other two codes. An unusual reversal of boundary layer separation with increasing angle of attack, following initial shock formation on the upper surface of the airfoil, was found in the experiment data. This phenomenon was not predicted by the CFD codes evaluated.

Hicks, Raymond M.↗
NASA NTRS1991

Oscillation phase relations in a Bridgman system

The thermal conditions under which convection in a tin melt undergoes the transition from steady flow to time-dependent flow are investigated. Previously, it has been shown that crystals that are directionally solidified from a time-dependent melt will have a larger defect density and increased chance of compositional striations. Thus, it is important for this transition to be well characterized. The experimental results to be presented were obtained from a two-zone Bridgman furnace with a middle insulation zone. Thermocouples were placed on the axis and on the outer wall of a cylindrical vitreous silica tube which contained molten tin. The phase relations between temperature oscillations measured at different positions in the cell are discussed. Fourier transforms are used to investigate the increasing complexity of convection as the temperature gradient is increased.

Knuteson, David J.↗
NASA NTRS1981

Advanced stability analysis for laminar flow control

Five classes of problems are addressed: (1) the extension of the SALLY stability analysis code to the full eighth order compressible stability equations for three dimensional boundary layer; (2) a comparison of methods for prediction of transition using SALLY for incompressible flows; (3) a study of instability and transition in rotating disk flows in which the effects of Coriolis forces and streamline curvature are included; (4) a new linear three dimensional instability mechanism that predicts Reynolds numbers for transition to turbulence in planar shear flows in good agreement with experiment; and (5) a study of the stability of finite amplitude disturbances in axisymmetric pipe flow showing the stability of this flow to all nonlinear axisymmetric disturbances.

Orszag, S. A.↗
NASA NTRS1993

Small hydrogen/oxygen rocket flowfield behavior from heat flux measurements

The mixing and heat transfer phenomena in small rocket flow fields with fuel film cooling is not well understood. An instrumented, water-cooled chamber with a gaseous hydrogen/gaseous oxygen injector was used to gather steady-state inner and outer wall temperature profiles. The chamber was tested at 414 kPa (60 psia) chamber pressure, from mixture ratios of 3.41 to 8.36. Sixty percent of the fuel was used for film cooling. These temperature profiles were used as boundary conditions in a finite element analysis program, MSC/NASTRAN, to calculate the local radial and axial heat fluxes in the chamber wall. The normal heat fluxes were then calculated and used as a diagnostic of the rocket's flow field behavior. The normal heat fluxes determined were on the order of 1.0 to 3.0 MW/meters squared (0.6 to 1.8 Btu/sec-inches squared). In the cases where mixture ratio was 5 or above, there was a sharp local heat flux maximum in the barrel section of the chamber. This local maximum seems to indicate a reduction or breakdown of the fuel film cooling layer, possibly due to increased mixing in the shear layer between the film and core flows. However, the flow was thought to be completely laminar, as the throat Reynolds numbers were below 50,000 for all the cases. The increased mixing in the shear layer in the higher mixture ratio cases appeared not to be due to the transition of the flow from laminar to turbulent, but rather due to increased reactions between the hydrogen film and oxidizer-rich core flows.

Reed, Brian D.↗
NASA NTRS1987

Unsteady motion and transition to turbulence in developing curved duct flow

An experiment was performed to further the understanding of developing flows in curved ducts of square cross-section. Unlike most earlier works, attention was paid to investigating the time-dependent character of the motion. Mean and unsteady flow characteristics were determined using flow visualization and a laser-Doppler velocimeter. Only one velocity component, that aligned in the longitudinal (streamwise) coordinate direction, was measured. Notwithstanding, the time histories, autocorrelations and spectra derived reveal a time-periodic motion that becomes turbulent with increasing Reynolds number. The results are of intrinsic fundamental value and also illustrate the danger of imposing symmetry of the conservation equations on numerical solutions of this flow.

Arnal, M.↗
NASA NTRS1982

Bifurcation and stability of low-order steady flows in horizontally and vertically forced convection

A nonlinear spectral model of two-dimensional, shallow Boussinesq convection which responds to heating in both the horizontal and vertical directions is examined. The governing partial differential system is converted to an infinite set of ordinary differential equations and truncated to a small set to permit detailed study of the number and types of transitions from one flow configuration to another. The Hadley number and the Rayleigh number are defined as the horizontal and vertical thermal forcing mechanisms, respectively, for inclusion in the nonlinear spectral model, which is composed of three equations. The model is then used to describe steady states, linearly stable solutions, and balancing factors in unstable stratification. The number and the distribution of the steady states are found to be qualitatively independent of the aspect ratio and the Prandtl number.

Yost, D. A.↗
NASA NTRS1991

Comparison of laser transit anemometry data analysis techniques

Two techniques for the extraction of two-dimensional flow information from laser transit anemometry (LTA) data sets are presented and compared via a simulation study and experimental investigation. The methods are a probability density function (PDF) estimation technique and a marginal distribution analysis technique. The simulation study builds on the results of previous work and provides a quantification of the accuracy of both techniques for various LTA data acquisition scenarios. The experimental comparison consists of using an LTA system to survey the flow downstream of a turbulence generator in a small low-speed wind tunnel. The collected data sets are analyzed and compared.

Humphreys, William M., Jr.↗
NASA NTRSDate not supplied

The Effect of Drag Model on Heatshield Recession due to Particle Impacts for Martian Spacecraft

A spacecraft entering the Martian atmosphere during a dust storm may experience recession to the heatshield due to dust particle impacts. Aerodynamic drag is the primary force that determines the trajectory of the dust particles through the shock layer. This paper examines the effect of particle drag model on the heatshield recession. Three particle drag models are assessed including two that are intended to be applicable over a wide range of particle flow conditions. Particle trajectories are computed in conditions measured during the 2007 major global dust storm. It was found that accounting for Knudsen number and compressibility effects made a large difference in the estimated particle impact velocity. The two drag models that were valid for transitional, compressible particle flow environments predicted only slightly-different amounts of heatshield recession due to dust particle impacts. A brief description of the effects of non-spherical particles on drag coefficients is provided.

Heatshield↗
NASA NTRSDate not supplied

The Effect of Drag Model on Heatshield Recession due to Particle Impacts for Martian Spacecraft

A spacecraft entering the Martian atmosphere during a dust storm may experience recession to the heatshield due to dust particle impacts. Aerodynamic drag is the primary force that determines the trajectory of the dust particles through the shock layer. This paper examines the effect of particle drag model on the heatshield recession. Three particle drag models are assessed including two that are intended to be applicable over a wide range of particle flow conditions. Particle trajectories are computed in conditions measured during the 2007 major global dust storm. It was found that accounting for Knudsen number and compressibility effects made a large difference in the estimated particle impact velocity. The two drag models that were valid for transitional, compressible particle flow environments predicted only slightly-different amounts of heatshield recession due to dust particle impacts. A brief description of the effects of non-spherical particles on drag coefficients is provided.

Heatshield↗
DOE OSTI2022

Towards optimal gas cooling with minimal aero-optical distortion for a laser amplifier head

Next-generation lasers combining high-peak-power, ultrashort pulses with high repetition rates have the potential to efficiently deliver the high-average-power outputs required by many emerging technologies and areas of research. This work introduces a three-stage workflow consisting of low- and high-fidelity fluid simulations, in addition to aero-optical analyses. The final goal is to optimize gas cooling within a laser amplifier head while maintaining minimal aero-optical distortions. Low-fidelity RANS simulations are used to obtain mean flow solutions and transition locations. High-fidelity LES simulations, informed by their RANS counterparts, provide solutions containing density fluctuations, which are then passed on to the aero-optical analysis. The aero-optical analysis provides insight into the optical quality of the laser beam passing through the flow found in the LES results.

42 ENGINEERING↗