Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TRAJECTORIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Identifying recharge processes into a vast “fossil” aquifer based on dynamic groundwater 81 Kr age evolution

Water in deep aquifers in arid regions is often considered to be "fossil" when modern recharge rates are negligible relative to the reservoir capacity. Over the past five decades, the Nubian Sandstone Aquifer (NSA) in the arid region of the Sinai Peninsula (Egypt) and the Negev Desert (Israel) has been considered to contain fossil water based on 14 C dating, which revealed 14 C ages of about 30 kyr over most of the aquifer. However, this relatively homogeneous age distribution contradicts the expected increase in groundwater age in the direction of decreasing piezometric head along the flow trajectories. Here, dating results with the longer-lived 81 Kr radioisotope (t 1/2 = 229 ± 11 kyr) are presented, highlighting a wide age range of 40 kyr to 630 kyr in the confined sections of the aquifer, all with very low 14 C activity (<1 pmC). Elevated 81Kr and 14 C activities were only observed within or close to the system's recharge areas. These findings support a new perception of groundwater replenishment during different epochs from the early mid- Pleistocene to the Holocene. By tracking the downstream age evolution, rejuvenation was identified in places where the confinement had been breached. At other locations, the existence of an older groundwater body contributing to the aquifer was detected by means of strongly depleted 81 Kr activity. High spatial heterogeneity in groundwater ages close to the discharge zone of the system is attributed to pronounced age stratification with depth. Calculated ages in the more isolated sections of the system were used to assess regional flow velocity, hydraulic conductivity, and their agreement with present recharge rates. We conclude that regional aquifers in which low 14 C activity suggests homogeneous ancient groundwater age should be reevaluated with 81Kr. With an effective age range beyond one million years, this may enable the restoration of recharge history and provide crucial information for the management of groundwater resources.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Performance of discontinuity-free components produced by additive turning computer aided manufacturing strategy

Computer aided manufacturing (CAM) techniques for directed energy deposition (DED) affect the material properties of the manufactured component based on the scan strategy used. In this study, we investigate the material characteristics of turning-style toolpath strategies to generate axisymmetric components with additive manufacturing (AM), referred to in this research as additive turning. This novel approach leverages existing CAM technology for turning, where the component rotates around a stationary cutting tool, to generate toolpath trajectories for DED with varying wall-thicknesses and controlled deposition angles. This strategy allows for entire components to be deposited in one continuous deposition, resulting in reduced cycle-time and improved material usage efficiency compared to conventional AM strategies where the beam is switched off at the end of every layer. Results from this study show that the use of additive turning can produce over 99 % dense components with less variation and anisotropy in texture and hardness, as well as a lower variation in elongation to failure when compared to conventional strategies. This research highlights that various CAM strategies could be deployed for AM to improve process efficiency or enable localized control over part performance.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Stress-controlled fatigue of HfNbTaTiZr high-entropy alloy and associated deformation and fracture mechanisms

The stress-controlled fatigue tests are carried out at a stress ratio of 0.1 and a frequency of 10 Hz, and span both low-cycle and high-cycle regimes by varying the applied stress amplitudes. The high-cycle fatigue regime gives a fatigue strength of 497 MPa and a fatigue ratio of 0.44. At equivalent conditions, the alloy's fatigue strength is greater than all other high-entropy alloys (HEAs) with reported high-cycle fatigue data, dilute body-centered cubic alloys, and many structural alloys such as steels, titanium alloys, and aluminum alloys. Through in-depth analyses of crack-propagation trajectories, fracture-surface morphologies and deformation plasticity by means of various microstructural analysis techniques and theoretical frameworks, the alloy's remarkable fatigue resistance is attributed to delayed crack initiation in the high-cycle regime, which is achieved by retarding the formation of localized persistent slip bands, and its good resistance to crack propagation in the low-cycle regime, which is accomplished by intrinsic toughening backed up by extrinsic toughening. Additionally, the stochastic nature of the fatigue data is neatly captured with a 2-parameter Weibull model.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Molecular dynamics studies of lattice defect effects on tritium diffusion in zirconium

Tritium diffusion in α-Zr containing point defects such as vacancies or self-interstitial atoms (SIAs) is simulated using molecular dynamics. Point defects rapidly aggregate to form extended defects, such as 3D nanoclusters and Frank loops. The geometry of extended defects is affected by the presence of tritium. At low temperature and in the absence of tritium, vacancies aggregate to form stacking fault pyramids. Addition of tritium at these temperatures promotes aggregation of vacancies to form 3D nanoclusters, within which the tritium concentration can be sufficiently high to suggest that these defects may serve as nucleation sites for hydride precipitation. Trapping of tritium in vacancy nanocluster reduces the calculated bulk diffusivity by an amount proportional to the vacancy concentration. At high temperature, vacancy clusters change shape to form planar basal dislocation loops, which bind tritium less strongly, leading to a sharp reduction in the fraction of trapped tritium and a corresponding increase in tritium diffusivity at high temperature. In contrast, SIAs increase tritium diffusion through α-Zr. Analysis of atomic trajectories shows that tritium does not interact directly with SIAs. In conclusion, diffusion enhancement is instead related to expansion of the lattice.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Phonon modal analysis of thermal transport in ThO 2 with point defects using equilibrium molecular dynamics

Defects can significantly degrade the thermal conductivity of ThO 2 , an advanced nuclear fuel material as well as a surrogate for other fluorite-structured materials. Here, we investigate how point defects in ThO 2 impact phonon mode-resolved thermal transport. By incorporating phonon modes from lattice dynamics, we decompose the trajectory and heat flux to phonon normal mode space and extract key phonon properties, including phonon relaxation times and their contributions to thermal conductivity. We implement two methods. The first method is based on the Green Kubo formalism to resolve the contribution of each phonon mode to thermal conductivity. The second resolves the lifetime of individual phonon modes and the thermal conductivity is calculated using the Boltzmann transport equation within relaxation time approximation. Notably, a lower contribution of acoustic modes is revealed compared to perturbative approaches considering only three-phonon scattering processes. The effects of four types of point defects are evaluated. The strongest impact on a reduction in thermal conductivity is from Th interstitials, followed by Th vacancies. O interstitials/vacancies have a similar impact, albeit smaller than defects on the thorium sublattice. These observations are consistent with previous studies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Quantifying the challenge of reaching a 100% renewable energy power system for the United States

We simulate pathways for achieving up to 100% renewable energy (RE) electric power systems for the contiguous United States. Under base conditions, the least-cost buildout has RE penetration growing up to 57% in 2050. Relative to this base scenario, average CO2 abatement costs of achieving 80%, 90%, 95%, and 100% RE are $25, $33, $40, and $61/ton, respectively, with system costs growing from $30 to $36/MWh at 95% (achieved in 2040) and $39/MWh at 100%. Incremental abatement costs from 99% to 100% RE reach $930/ton, driven primarily by the need for firm RE capacity. In addition to the base conditions, we also examined 22 alternative conditions for a buildout of up to 100%. These sensitivities capture different technology trajectories, compliance requirements, requirement timing, electrification, and transmission availability. Nonlinear marginal costs for the last few percent approaching 100% RE were found for all sensitivities, which might motivate alternative nonelectric-sector abatement opportunities.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Diagnostic-free onboard battery health assessment

Diverse usage patterns induce complex and variable aging behaviors in lithiumion batteries, complicating accurate health diagnosis and prognosis. Separate diagnostic cycles are often used to untangle the battery’s current state of health from prior complex aging patterns. However, these same diagnostic cycles alter the battery’s degradation trajectory, are time-intensive, and cannot be practically performed in onboard applications. Here, in this work, we leverage portions of operational measurements in combination with an interpretable machine learning model to enable rapid, onboard battery health diagnostics and prognostics without offline diagnostic testing and the requirement of historical data. We integrate mechanistic constraints within an encoder-decoder architecture to extract electrode states in a physically interpretable latent space and enable improved reconstruction of the degradation path. The health diagnosis model framework can be flexibly applied across diverse application interests with slight fine-tuning.

battery aging reconstruction↗
DOE OSTI2025

Low Peripheral Blood Counts and Elevated Proinflammatory Cytokines Signal a Poor CD19 Chimeric Antigen Receptor T-cell Response in Acute Lymphoblastic Leukemia

CD19 chimeric antigen receptor T-cell (CAR-T) therapy has significantly improved outcomes for patients with relapsed/refractory B-cell acute lymphoblastic leukemia (R/R B-ALL). However, approximately 20% of patients fail to achieve a complete remission (CR), and some develop severe, life-threatening toxicities. Understanding the biological mechanisms underlying both dysfunctional responses and severe toxicity is essential for optimizing patient management and improving therapeutic efficacy. This study aimed to (1) characterize cytokine profiles associated with dysfunctional responses and severe toxicity following CAR-T infusion, (2) examine the timing and trajectory of cytokine changes in relation to treatment outcomes, and evaluate potential strategies for mitigating toxicity and treatment failure. We conducted a comprehensive analysis of serum cytokine profiles in 86 adult and pediatric patients undergoing autologous CD19 CAR-T therapy for B-ALL. Patients were categorized into three groups: (1) Dysfunctional response—Patients who failed to achieve a minimal residual disease-negative CR (MRD-CR) by Day 63 or who experienced recurrence of CD19+ disease in the setting ongoing CAR-T cell detection before Day 63. (2) Functional response with severe cytokine release syndrome (CRS) and/or neurotoxicity (NTX)—Patients with best response of MRD-CR by Day 63 who experienced grade 3 or higher CRS or NTX. (3) Functional response without severe CRS or NTX—Patients with best response of MRD-CR by Day 63 who did not experience grade =3 CRS or NTX. Cytokine levels were measured during the first-week postinfusion and correlated with treatment efficacy, toxicity outcomes, complete blood counts, and CAR-T expansion dynamics. This analysis aimed to better understand how cytokine profiles relate to patient outcomes and immune responses in CAR-T therapy. Patients with dysfunctional response exhibited decreased neutrophils, platelets, and levels of granulocytic cytokines (suggestive of low bone marrow reserve) alongside elevated pro-inflammatory cytokines by Day 1. Functional response with severe toxicity patients showed a progressive rise in proinflammatory cytokines, reaching similar levels to dysfunctional response patients by Day 7. We observed that high cytokines at both the Day 1 and Day 7 time points were associated with poor survival. These findings remained significant when adjusting for high disease burden, a known predictor of severe inflammatory toxicity and lack of response. Early post-CAR-T infusion inflammation is associated with both dysfunctional response and severe toxicity—even after adjusting for disease burden. This suggests that inflammation, in addition to disease burden, plays a role in determining patient outcome. Therefore, strategies aimed at reducing the pro-inflammatory state prior to or early after CAR-T cell infusion may improve outcomes for R/R B-ALL patients.

Serum cytokines↗
DOE OSTI2020

Bulk and position-specific isotope geochemistry of natural gases from the Late Cretaceous Eagle Ford Shale, south Texas

Here, a dataset of bulk and position-specific isotope compositions of shale gases from the Late Cretaceous Eagle Ford Shale, south Texas is reported. The chemical and bulk isotopic compositions of the seven samples in this study and those available from the literature show that across the play, produced natural gas from the Eagle Ford Shale preserves a wide range of gas compositions (wetness, ~5 to >90%) and δ 13 C values of C 1 –C 3 . The depth profiles of the isotopic compositions suggest that the western region of the Eagle Ford Shale deposit had experienced as much as 700–800 m of uplift-erosion or gas migration. The timing of and lost-gas fractions by gas expulsion events very likely affected their gas compositions and bulk isotope compositions. Some deep (>3000–3500 m), matured (%Ro > 1.5) gases with heavy δ 13 C(C 1 –C 3 ) values indicate significant loss (>50%) of the early-stage gases. For the position-specific isotope deviations of propane, the ΔC 2-1 values of the five samples show small decrease with well depths, while the ΔH 2-1 values have a general increasing trend. Although some samples fall very close to the equilibrium model trajectories with reasonable calculated temperatures (138–148 °C), the position-specific isotope compositions of propane from the Eagle Ford Shale gases are likely results of thermal cracking of various organic molecules within the source rocks, which have different activation energy for cracking and non-statistical distributions of C/H isotope within them.

58 GEOSCIENCES↗
DOE OSTI2024

Underlying mechanism of structural transformation between GaSb and GaAs response to intense electronic excitation

Ion irradiation of semiconductors has emerged as a promising approach for fabricating self-organized nanosystems with high atomic precision, despite often being accompanied by undesirable phenomena. Exploring the mechanisms underlying structural transformations is crucial for assessing nanostructure array types under complex irradiation environments. By quantitatively calculating the thermodynamically driven processes and analyzing the impact of intrinsic structural parameters, distinct structural transformations in response to intense electronic excitation are systematically investigated in gallium antimonide (GaSb) and gallium arsenide (GaAs) systems. In high-energy regimes, the nanofibers layer of GaSb exhibits intriguing structural discrepancy, characterized by partial nanofibers with coherent boundaries, interspersed nanopores accompanied by antisite defects and Ga precipitates, distinguishing to a series of discontinuous latent tracks that emerged within cylindrical trajectories in GaAs. Furthermore, significant diffusion behaviors of the nanohillocks are discovered in GaAs, with higher average roughness than GaSb, driven by the gradient stress distribution influenced by the free-surface effects. The deposition energy for melting phase formation, Gibbs free energy, and Ga diffusion coefficients contribute to the distinctive structural features, evidencing relatively stable morphological configurations and higher irradiation resistance in GaAs. Consequently, special optoelectronic properties associated with structural discrepancies facilitate the design and optimization of material functionalities by irradiation technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Shape memory effect in metallic glasses

Shape memory effect (SME), mainly present in crystalline Ti-Ni alloys, is basically missing in metallic glasses (MGs) that lack the long-range periodic order of crystals. In this work, we report experimental results of SME in annealed MGs, in which the low-energy configuration state recovery is observed by both differential scanning calorimetry and X-ray photon correlation spectroscopy. We elucidate the origin of SME in MGs under the potential energy landscape framework, i.e., after annealing, the energy of MGs enters into a deep basin and atoms are located in the low-energy configuration state. Albeit deviating from their relative stable configurations by temperature changes, atoms in the annealed MGs tend to return to the low-energy atomic configurations along certain trajectories as pre-annealing temperature is approached, These results could extend the application of MGs as functional materials by directionally manipulating their energy states via annealing and rejuvenation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Enhanced ionic conductivity and lack of paddle-wheel effect in pseudohalogen-substituted Li argyrodites

Superionic conductors are key to the development of safe and high-energy-density, all-solid-state batteries. Using a combined theoretical and experimental approach, we explore the feasibility of increasing the ionic conductivity through pseudohalogen substitution in the Li argyrodite structure. Under the guidance of calculated thermodynamic stability, BH 4 -substituted Li argyrodite, Li 5.91 PS 4.91 (BH 4 ) 1.09 , was successfully synthesized via a mechanochemical method. As-synthesized BH 4- substituted Li argyrodite displays an ionic conductivity of 4.8 mS/cm at 25°C. Ab initio molecular dynamics simulation trajectory analysis was used to investigate how BH 4 facilitates Li-ion diffusion and indicates only a weak correlation with the B–H bond motion. Here, we find that the enhanced conductivity mainly originates from the weak interaction between Li and BH 4 and find no evidence of a paddle-wheel effect from the polyanion. This work provides insight into how cluster ions enhance Li diffusion and systematically describes how to explore superionic conductors with pseudohalogen substitution.

25 ENERGY STORAGE↗
DOE OSTI2023

Comparison of forward and inverse cam generation methods for the design of cam-linkage mechanisms

This paper presents a comparison between the forward and inverse cam generation methods applied to the design of a multi-lobed cam-rocker slider mechanism for function generation. In the forward method, the cam profile is specified directly and then the linkage output is determined using kinematics. In the inverse method, the trajectory of the output link is specified first and then the cam profile is determined using inverse linkage kinematics. First, the cam-linkage mechanism is introduced, and relevant kinematic equations are presented. Then, the cam generation methods are thoroughly explained. Here, the two cam generation methods are applied to a case study of a hydraulic motor using a multi-lobed cam and multiple linkage mechanisms. While the forward method has direct control of the cam shape, the inverse method has direct control of the linkage output and offers an advantage in calculation speed. For the mechanism selected, the cam designed with the inverse method achieved a reduction of at least 50.97% in the torque ripple when compared to the cam designed with the forward method.

42 ENGINEERING↗
DOE OSTI2023

Crystallographic and temperature effects in low-energy collisions for plasma–material interactions

The interaction of plasma with materials is critical for the fundamental understanding of non-equilibrium processes and their wide application. Recent achievements in fusion energy research emphasize the importance of this problem. Because modelling and predicting plasma–material interactions (PMI) require considering a tremendous number of single plasma particle–surface interaction events, this type of modelling was, until recently, possible only within a binary collision approximation (BCA). The BCA approach considers materials as uniform temperature-insensitive media. The research presented here addresses the PMI problem within an atomistic-based approach for the first time at a statistically significant level. Approximately 10 5 molecular dynamics trajectories were generated for 100 eV deuterium ions interacting with a tungsten surface. The research demonstrated the critical importance of incorporating the discrete lattice structure of matter into the model. Deuterium penetration depth and fraction of backscattered deuterium ions strongly depend on the surface orientation, the impact incident ion directions, and the ions’ initial positions. On average, the BCA-based calculations underestimate the penetration depth by a factor of two or more, and the fraction of backscattered atoms is overestimated by a factor of two or more. As a result, increasing the material temperature from 500 to 3000 K reduces penetration depth by about 30% and increases the fraction of backscattered atoms by 250%.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Characterization of nonlinear ultrasonic waves behavior while interacting with poor interlayer bonds in large-scale additive manufactured materials

Over the past decades, researchers have developed several nonlinear ultrasonic techniques for quality control of materials commonly used in different applications. Owing to the superior sensitivity of nonlinear ultrasound waves to small defects such as micro-cracks, their applicability in different nondestructive testing (NDT) problems has been investigated in numerous studies. These studies utilize frequency domain analysis to detect the generation of higher harmonics because of the formation of defects in the inspected medium. Frequency domain analysis based on the Fourier transform is a significant approach used in linear systems; however, it may not perform adequately on nonlinear systems. Hence, studies on nonlinear dynamics and physics consider analyzing systems' behavior in the phase-space domain. In contrast to the frequency domain analysis, which can result in information loss, analysis in the phase-space domain retains all the information regarding a system's states. Here, we investigate the nonlinearities induced by poor interlayer bonding in polymer-based additive manufactured parts in the phase-space domain. It is convenient to characterize the nonlinearity in the phase-space domain because it provides a geometrical representation of a system's states. Two types of low quality interlayer bond are considered. The first type is simulated artificially while the second type is manufactured by reducing the bond quality during the printing process. The analysis verified that the received ultrasonic signals exhibit classical nonlinear behavior in the phase-space domain while interacting with simulated poor interlayer bonds. In addition, the results showed that the behavior of ultrasonic waves is amplitude-dependent and evolves into models that have not been previously reported. Furthermore, Largest Lyapunov Exponent (LLE) is used to quantify the behavior of nonlinear ultrasonic waves while interacting with poor interlayer bonds. Using LLE, it was observed that the divergence rate of the phase-space trajectories depends on the amplitude of the excitation. This observation quantitatively proves that nonlinear behavior of ultrasound while interacting with poor interlayer bonds can be amplitude-dependent. The results of both simulated and inherent poor interlayer bond cases showed that LLE can be used as a reliable quantitative damage-sensitive feature to detect and potentially characterize weak bonds, which are difficult to detect using conventional approaches. Additionally, the reported results in the phase-space domain provide a basis for proposing a new mathematical model for ultrasonic waves interacting with poor interlayer bonds.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dynamic response of a freely rotating butterfly valve in the advanced test reactor – dynamic fluid-body interaction modeling

To regulate primary coolant flow in the Advanced Test Reactor (ATR), a butterfly valve was installed between the primary coolant pumps and the reactor core. If the mechanical connection between the valve's disk and its shaft ever fails, the disk will rotate freely. Rapid disk rotation may induce pressure surges that could damage upstream pipes. In the present work, the rotational trajectory and pressure evolution during a disk free-rotation scenario were analyzed via the dynamic fluid-body interaction (DFBI) approach in STAR-CCM+, with the movement of a solid being driven by the forces and moment/torque imposed by its surrounding fluid. Assuming a large initial opening angle, the disk accelerates slowly, but swiftly passes the closed position. As a result of the sudden valve closure, a pressure surge occurs in the upstream pipes, exceeding their maximum allowable pressure. Furthermore, the disk does not stabilize at the closed position but continually oscillates due to the unsteady nature of the coolant flow. Because of the significant and continuous water hammer effect, a fix to the butterfly valve is being implemented to prevent rapid valve closure due to failure at the valve's disk/shaft mechanical connection.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

The CLAS12 drift chamber system

The CEBAF Large Acceptance Spectrometer at 12~GeV (CLAS12) is located in Hall~B, one of the experimental halls at Jefferson Lab. The forward part of CLAS12 is built around a superconducting toroidal magnet. The six coils of the toroid divide the detector azimuthally into six sectors. Each sector contains three multi-layer drift chambers for reconstructing the trajectories of charged particles originating from a fixed target. Each of the 18 planar chambers has two ``superlayers'' of six layers each, with the wires in the two adjacent superlayers oriented at ± 6° stereo angles. Each layer has 112 hexagonal cells spanning a range from about 5° to 40° in polar angle. The six-layer structure provides redundancy in track segment finding and good tracking efficiency even in the presence of some individual wire inefficiency. The design, construction, operation, and calibration methods are described, and estimates of the efficiency and resolution are presented from in-beam measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Large radial shift experiments in RHIC and their implications for EIC design

The Hadron Storage Ring (HSR) in the future Electron-Ion Collider (EIC) must operate over a broad range of design circumferences. In 2018 preliminary beam studies on the circumference adjustment capabilities of the Relativistic Heavy Ion Collider (RHIC) were performed by applying a small momentum offset to the circulating bunches without adjusting any bending magnets. The off-momentum linear optics were corrected back to on-momentum conditions. Applying a similarly small deviation to the dipole fields of a select set of bending magnets provides a large radial shift over much of the RHIC (or HSR) circumference while leaving the design trajectory unchanged in the insertion regions. Here, this paper presents the design of the different lattice configurations foreseen as the most viable options for the required HSR circumference changes, and highlights the modifications necessary for regular operations and to allow for testing these new settings in RHIC. Experimental results from 2021 and 2022 are reviewed and compared to model predictions obtained from both MAD-X and Bmad. The implications of these results for HSR design are discussed.

43 PARTICLE ACCELERATORS↗