Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Directional spectra of ocean waves from microwave backscatter: A physical optics solution with application to the short-pulse and two-frequency measurement techniques

Two simple microwave radar techniques that are potentially capable of providing routine satellite measurements of the directional spectrum of ocean waves were developed. One technique, the short pulse technique, makes use of very short pulses to resolve ocean surface wave contrast features in the range direction; the other technique, the two frequency correlation technique makes use of coherency in the transmitted waveform to detect the large ocean wave contrast modulation as a beat or mixing frequency in the power backscattered at two closely separated microwave frequencies. A frequency domain analysis of the short pulse and two frequency systems shows that the two measurement systems are essentially duals; they each operate on the generalized (three frequency) fourth-order statistical moment of the surface transfer function in different, but symmetrical ways, and they both measure the same directional contrast modulation spectrum. A three dimensional physical optics solution for the fourth-order moment was obtained for backscatter in the near vertical, specular regime, assuming Gaussian surface statistics.

Jackson, F. C.↗

Mimicking surface polaritons for unpolarized light with high-permittivity materials

Tailoring near-field optical phenomena often requires excitation of surface plasmon polaritons (SPPs) or surface phonon polaritons (SPhPs), surface waves at the interface between media with electric permittivities of opposite sign. Despite their unprecedented field confinement, surface polaritons are limited by polarization: only transverse magnetic fields enable their excitation, leaving transverse electric fields unexploited. By contrast, guided modes in positive permittivity materials occur for both linear polarizations, however, they typically cannot compete with SPPs and SPhPs in terms of confinement. Furthermore we show that omnipolarization guided modes in materials with high-permittivity resonances can reach confinement factors similar to SPPs and SPhPs, while surpassing them in terms of propagation distance. We explore the cases of silicon carbide and transition-metal dichalcogenides near their permittivity resonances, and compare with SPhPs in silicon carbide and SPPs in silver, at infrared and visible frequencies, respectively.

36 MATERIALS SCIENCE↗

Upper mantle anisotropy - Evidence from free oscillations

There is a growing body of evidence that much of the upper mantle may be anisotropic to the propagation of seismic waves. The present investigation shows that a small amount of anisotropy completely changes the nature of the surface wave and normal mode problem. In particular, the apparent lack of sensitivity of many of the spheroidal modes to the compressional velocity structure is due to the degeneracy in the isotropic case. The normal mode data set appears to be adequate to resolve the five elastic constants of a transversely isotropic upper mantle. Dziewonski and Anderson (1981) have shown that these data can be fitted with anisotropy restricted to the upper 200 km of the mantle.

Anderson, D. L.↗

Explosion Source Models and the Scattering Origin of Regional Phases from SPE Phase 1 Coda Spectral Ratios

The Source Physics Experiment(SPE)explosions provide comprehensive ground truth information,and nearby recordings that are rarely available in typical monitoring scenarios. Here, we look for relationships with local and regional distance data to understand source and propagation effects in an effort to improve monitoring at a distance. We examine source spectral ratios, which can be measured to high precision by taking advantage of many SPE and independently operated stations, as well as the redundancy available from coda waves. Classical source models (Mueller and Murphy, 1971, MM71; Denny and Johnson, 1991, DJ91)predict the source ratios poorly; however, a hybrid model(MM71 with DJ91 cavity radii)performs better, and by varying cavity and elastic radii we obtain models that fit to within measurement precision. Based on this, the best prediction model for the SPE suite is the hybrid model with cavity radius decreased by 95%, and elastic radius decreased by 75%. This works best for mid-range scaled depths of burial (SPE-1, 2, 3, and 5). We do not guarantee transportability to other geologies,depth and scaled depth ranges. Finally, we observe a distinct spectral modulation at 6-9Hzthat is not predicted by classical models, and is most likely the result of interference of short period surface waves(Rg)with those produced by spallation of near surface layers.The same modulationis observed for compressional (P) and shear(S) waves at distance, indicating the origin of these waves as scattered Rg.The scattering process must be accounted for quantitatively when using distant signals to monitor treaty compliance over broad regions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Polarized radiance fields under a dynamic ocean surface: a three-dimensional radiative transfer solution

The hybrid matrix operator, Monte Carlo (HMOMC) method previously reported [Appl. Opt.47, 1063-1071 (2008)APOPAI0003-693510.1364/AO.47.001063] is improved by neglecting higher-order terms in the coupling of the matrix operators and by introducing a dual grid scheme. The computational efficiency for solving the vector radiative transfer equation in a full 3D coupled atmosphere-surface-ocean system is substantially improved, and, thus, large-scale simulations of the radiance distribution become feasible. The improved method is applied to the computation of the polarized radiance field under realistic surface waves simulated by the power spectral density method. To the authors' best knowledge, this is the first time that the polarized radiance field under a dynamic ocean surface and the underwater image of an object above such an ocean surface have been reported.

58 GEOSCIENCES↗

On nonsinusoidal waves at the Earth's magnetopause

We have examined International Sun Earth Explorer (ISEE) 1 and 2 data during an interval of multiple magnetopause crossings along the flanks of the tail on January 22, 1978. During the event the interplanetary magnetic field was mainly northward. We found that the surface waves on the magnetopause were nonsinusoidal with steepened sunward facing surfaces. This result is consistent with observations reported for an analogous event by Chen et al. (1993). The dawn-dusk electric field E in the low-latitude boundary layer was approx. 10 kV/R(sub E), which is much greater than the approx. 1 kV/R(sub E) dawn-dusk E field typical of the sunward convecting plasma sheet plasma. The ratio of the dawn-dusk E field in the LLBL to the dusk-dawn E in the magnetosheath was approx. 1/3. We propose that the magnetic field in the magnetosheath modulates the wave form in a way that may result in an anomalous transport of momentum across the magnetopause.

Chen, S.-H.↗

Unstable circular null geodesics of static spherically symmetric black holes, Regge poles, and quasinormal frequencies

We consider a wide class of static spherically symmetric black holes of arbitrary dimension with a photon sphere (a hypersurface on which a massless particle can orbit the black hole on unstable circular null geodesics). This class includes various spacetimes of physical interest such as Schwarzschild, Schwarzschild-Tangherlini, and Reissner-Nordstroem black holes, the canonical acoustic black hole, or the Schwarzschild-de Sitter black hole. For this class of black holes, we provide general analytical expressions for the Regge poles of the S matrix associated with a massless scalar field theory. This is achieved by using third-order WKB approximations to solve the associated radial wave equation. These results permit us to obtain analytically the nonlinear dispersion relation and the damping of the 'surface waves' lying close to the photon sphere as well as, from Bohr-Sommerfeld-type resonance conditions, formulas beyond the leading-order terms for the complex frequencies corresponding to the weakly damped quasinormal modes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Surface Plasmon Polaritons at the Boundary of a Graphene-Based Thin-Layer Medium

Properties of surface plasmon polaritons of the TM type at the interface of an isotropic insulator and a periodic graphene–insulator structure have been investigated. It is established that the presence of graphene in this structure allows one to obtain (in certain frequency ranges) negative effective permittivity and implement the condition for the existence of a surface wave that is practically unabsorbed. The influence of the graphene content in the structure on the characteristics of plasmon polaritons (in particular, the possibility of their significant slowing-down) is demonstrated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Waves in the vicinity of the magnetopause

Magnetic field data from the IMP 6 spacecraft are used in an attempt to clarify the magnetic field microstructure of the magnetopause. After discussing the problems in identifying the magnetopause, and the difficulties in determining normal components, the presence of waves in the vicinity of the magnetopause is discussed. The downstream magnetopause is considered and the presence of surface waves on the tail boundary is demonstrated.

Fairfield, D. H.↗

Wave propagation in gaseous accretion disks

Linear wave propagation is studied in geometrically thin accretion disks where the equilibrium variables, such as density and temperature, are stratified in the direction normal to the plane of the disk, i.e., the vertical direction. Temperature stratification causes refraction such that initially radially propagating waves are deflected in the vertical direction. For moderate temperature contrast between the disk's midplane and its surface, wave transmission into the tenuous upper atmosphere is allowed. In typical astrophysical accretion disks, these two effects inhibit wave propagation through large distances in the radial direction.

Lin, D. N. C.↗

Cosmology with liquid mirror telescopes

Liquid mirrors provide an exciting means to obtain large optical telescopes for substantially lower costs than conventional technologies. The liquid mirror concept has been demonstrated in the lab with the construction of a diffraction limited 1.5 m mirror. The mirror surface, using liquid mercury, forms a perfect parabolic shape when the mirror cell is rotated at a uniform velocity. A liquid mirror must be able to support a heavy mercury load with minimal flexure and have a fundamental resonant frequency that is as high as possible, to suppress the amplitude of surface waves caused by small vibrations transmitted to the mirror. To minimize the transmission of vibrations to the liquid surface, the entire mirror rests on an air bearing. This necessitates the mirror cell being lightweight, due to the limited load capabilities of the air bearing. The mirror components must also have physical characteristics which minimize the effects of thermal expansion with ambient temperature fluctuations in the observatory. In addition, the 2.7 m mirror construction is designed so that the techniques used may be readily extended to the construction of large mirrors. To attain the goals of a lightweight, rigid mirror, a composite laminant construction was used. The mirror consists of a foam core cut to the desired parabolic shape, with an accuracy of a few mm. An aluminum hub serves as an anchor for the foam and skin, and allows precise centering of the mirror on the air bearing and drive system. Several plys of Kevlar, covered in an epoxy matrix, are then applied to the foam. A final layer of pure epoxy is formed by spin casting. This final layer is parabolic to within a fraction of a mm. An aluminum ring bonded to the circumference of the mirror retains the mercury, and incorporates stainless-steel hard-points for the attachment of balance weights.

Hogg, David W.↗

SAR observations of the Gulf Stream during SWADE

The Surface Wave Dynamics Experiment (SWADE) has gathered SAR observations of the Gulf Stream that show a change in ocean surface brightness; this may be due to the effects of a change in air-sea temperature difference across the observed edge, where the boundary is defined by warm, quickly flowing Gulf Stream water and cooler, relatively stationary shelf water. The two images discussed indicate the possibility of deepening understanding of Gulf Stream front dynamics by using the abundant spatial data of SAR imagery, in conjunction with more conventional (point-like) data on hydrography and currents.

Vachon, Paris W.↗

Convection and Easterly Waves Observed in the Eastern Pacific ITCZ During EPIC2001

During the last three weeks of September 2001, the East Pacific Investigation of Climate Processes in the Coupled Ocean-Atmosphere System (EPIC2001) intensive field campaign focused on studies of deep convection in the ITCZ-cold tongue complex over the Mexican warm-pool region (10 deg. N 95 deg. W) of the eastern Pacific Ocean. Major observational platforms deployed during this phase of EPIC2001 included two ships, the NOAA R/V Ronald H. Brown and the NSF R/V Horizon, and two research aircraft including a NOAA P-3 and the NCAR C-130. This study utilizes new C-band Doppler radar and sounding observations collected aboard the R/V Ronald Brown to describe the 4-D structure of ITCZ convection as a function of the environmental forcing and phase of 3-5 day easterly wave passages. Three distinct easterly wave passages occurred during EPIC2001. Each wave originated in the eastern Atlantic Ocean and after moving over Central America and into the eastern Pacific, were easily identified in time-height profiles of wind and thermodynamic data collected at the position of the R/V Brown. In all cases, the wave trough axes (as defined by changes in the meridional and zonal wind direction and changes in pressure altitude) exhibited relatively weak shear at low to mid-levels and tilted westward with height. The humidity profile in each wave did not exhibit as great a tilt in the vertical as the trough axes. Consistent with previous studies of westward tilting waves over the western Pacific Ocean, peaks in radar diagnosed rainfall tended to lead the passage of the surface wave trough by 0-2 days.

Petersen, Walter A.↗

WEC-Sim Modeling of Laminar Scientific's Patented Seesaw Wave Energy Converter: Preprint

Laminar Scientific's patented seesaw wave energy converter was modeled in WEC-Sim to predict performance. The device operates by utilizing ocean surface waves to rotate a truss in pitch about a pivot. The pivot is located at the top of two pylons, which are embedded in the seafloor. The seesaw has a float on either end, and the buoyancy forces from each float cause the system to rise or fall with passing waves. Device performance relies upon seesaw length and ocean wavelength creating an antiphase effect. The seesaw truss has an adjustable length intended to achieve this effect. The operation method enforces a narrow band of wavelengths which induce the largest rotational motion from the device. The hydrodynamic analysis of the device was performed using Capytaine, and the results confirmed that the device operates best in a narrow frequency band. Four float-to-float spacing cases and three pylon radii were examined. The hydrodynamic results indicate a match between the model and the physical expectations for the device, and that varying the pylon radii by 0.1-m increments for three instances creates minimal changes in hydrodynamic properties. Power matrices for three float spacing cases of the device were simulated with Joint North Sea Wave Project spectra waves and optimal power take-off damping in WEC-Sim. The maximum average power production for the 15-m spacing case was 14.1 kW with a 5.0-s peak wave period and 4-m significant wave heights. Plots of capture-width ratios indicated that the device performance was linear and confirmed that the device is optimal in a narrow frequency band. The maximum percentage of the available wave power produced by the 15-m device was approximately 16%. Simulations of the device in regular waves were used to produce plots of average power compared to a ratio of float spacing to wavelength. These plots indicate that the power production is maximized at a ratio of 0.5, and further confirm that the device has a narrow frequency response. The device was simulated at an example field location, where the device produced an annual average power rating of 1.6 kW given an average omnidirectional wave climate of 10.3 kW m-1 and an optimal, linearized power take-off model. While the maximum predicted device performance is reliant upon a narrow band of wave frequencies, the conducted analysis provides an opportunity to improve device design prior to prototyping and testing. Modifying the design to respond to a broader frequency range would improve device performance.

numerical modeling↗

The Prospect of using Three-Dimensional Earth Models To Improve Nuclear Explosion Monitoring and Ground Motion Hazard Assessment

The last ten years have brought rapid growth in the development and use of three-dimensional (3D) seismic models of Earth structure at crustal, regional and global scales. In order to explore the potential for 3D seismic models to contribute to important societal applications, Lawrence Livermore National Laboratory (LLNL) hosted a 'Workshop on Multi-Resolution 3D Earth Models to Predict Key Observables in Seismic Monitoring and Related Fields' on June 6 and 7, 2007 in Berkeley, California. The workshop brought together academic, government and industry leaders in the research programs developing 3D seismic models and methods for the nuclear explosion monitoring and seismic ground motion hazard communities. The workshop was designed to assess the current state of work in 3D seismology and to discuss a path forward for determining if and how 3D Earth models and techniques can be used to achieve measurable increases in our capabilities for monitoring underground nuclear explosions and characterizing seismic ground motion hazards. This paper highlights some of the presentations, issues, and discussions at the workshop and proposes two specific paths by which to begin quantifying the potential contribution of progressively refined 3D seismic models in critical applied arenas. Seismic monitoring agencies are tasked with detection, location, and characterization of seismic activity in near real time. In the case of nuclear explosion monitoring or seismic hazard, decisions to further investigate a suspect event or to launch disaster relief efforts may rely heavily on real-time analysis and results. Because these are weighty decisions, monitoring agencies are regularly called upon to meticulously document and justify every aspect of their monitoring system. In order to meet this level of scrutiny and maintain operational robustness requirements, only mature technologies are considered for operational monitoring systems, and operational technology necessarily lags contemporary research. Current monitoring practice is to use relatively simple Earth models that generally afford analytical prediction of seismic observables (see Examples of Current Monitoring Practice below). Empirical relationships or corrections to predictions are often used to account for unmodeled phenomena, such as the generation of S-waves from explosions or the effect of 3-dimensional Earth structure on wave propagation. This approach produces fast and accurate predictions in areas where empirical observations are available. However, accuracy may diminish away from empirical data. Further, much of the physics is wrapped into an empirical relationship or correction, which limits the ability to fully understand the physical processes underlying the seismic observation. Every generation of seismology researchers works toward quantitative results, with leaders who are active at or near the forefront of what has been computationally possible. While recognizing that only a 3-dimensional model can capture the full physics of seismic wave generation and propagation in the Earth, computational seismology has, until recently, been limited to simplifying model parameterizations (e.g. 1D Earth models) that lead to efficient algorithms. What is different today is the fact that the largest and fastest machines are at last capable of evaluating the effects of generalized 3D Earth structure, at levels of detail that improve significantly over past efforts, with potentially wide application. Advances in numerical methods to compute travel times and complete seismograms for 3D models are enabling new ways to interpret available data. This includes algorithms such as the Fast Marching Method (Rawlison and Sambridge, 2004) for travel time calculations and full waveform methods such as the spectral element method (SEM; Komatitsch et al., 2002, Tromp et al., 2005), higher order Galerkin methods (Kaser and Dumbser, 2006; Dumbser and Kaser, 2006) and advances in more traditional Cartesian finite difference methods (e.g. Pitarka, 1999; Nilsson et al., 2007). The ability to compute seismic observables using a 3D model is only half of the challenge; models must be developed that accurately represent true Earth structure. Indeed, advances in seismic imaging have followed improvements in 3D computing capability (e.g. Tromp et al., 2005; Rawlinson and Urvoy, 2006). Advances in seismic imaging methods have been fueled in part by theoretical developments and the introduction of novel approaches for combining different seismological observables, both of which can increase the sensitivity of observations to Earth structure. Examples of such developments are finite-frequency sensitivity kernels for body-wave tomography (e.g. Marquering et al., 1998; Montelli et al., 2004) and joint inversion of receiver functions and surface wave group velocities (e.g. Julia et al., 2000).

58 GEOSCIENCES↗

Composite waveguide on a photorefractive crystal

A new waveguiding structure (composite waveguide) has been proposed, which has the form of a linear dielectric layer on the surface of a photorefractive crystal and supports spatially confined modes propagating along its surface. We demonstrate that the modal properties of the composite waveguide are determined by those of a Bragg waveguide and the properties of nonlinear surface waves and the leaky modes of the thin-film waveguide. Various schemes of mode excitation in the composite waveguide are examined.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ku-band ocean radar backscatter observations during SWADE

We present results obtained by an airborne Ku-band scatterometer during the Surface Wave Dynamics Experiment (SWADE). The specific objective of this study is to improve our understanding of the relationship between ocean radar backscatter and near surface winds. The airborne scatterometer, NUSCAT, was flown on the NASA Ames C-130 over an instrumented oceanic area near 37 deg N and 74 deg W. A total of 10 flights from 27 Feb. to 9 Mar. 1991 were conducted. Radar backscatter at incidence angles of 0 to 60 deg were obtained. For each incidence angle, the NUSCAT antenna was azimuthally scanned in multiple complete circles to measure the azimuthal backscatter modulations. Both horizontal and vertical polarization backscatter measurements were made. In some of the flights, the cross-polarization backscatter was measured as well. Internal calibrations were carried out throughout each of the flights. Preliminary results indicate that the radar was stable to +/-0.3 dB for each flight. In this paper, we present studies of the backscatter measurements over several crossings of the Gulf Stream. In these crossings, large air-sea temperature differences were encountered and substantial changes in the radar cross section were observed. We summarize the observations and compare them to the changes of several wind variables across the Gulf Stream boundary. In one of the flights, the apparent wind near the cold side of the Gulf Stream was very low (less than 3 m/s). The behavior of the radar cross sections at such low wind speeds and a comparison with models are presented. A case study of the effects of swell on the absolute cross section and the azimuthal modulation pattern is presented. Significant wave heights larger than m were observed during SWADE. The experimentally observed effects of the swell on the radar backscatter are discussed. The effects are used to assess the uncertainties in wind retrieval due to underlying waves. A summary of azimuthal modulation from our ten-flight of NUSCAT data is given. Wind velocities, air and sea surface temperature, ocean spectrum, and other variables measured from aircraft and buoys are also shown.

Nghiem, S. V.↗

High-speed X-ray investigation of melt dynamics during continuous-wave laser remelting of selective laser melted Co-Cr alloy

The objective of this study is to quantify the melt pool dynamics during continuous-wave laser remelting of a Co-Cr alloy manufactured using selective laser melting. This knowledge will inform process improvement and numerical modeling of laser remelting. A high-intensity x-ray beam imaged a 2 mm × 0.5 mm area of the surface with a 50 kHz framerate. Analysis of these videos quantified the melt pool surface wave movement and compared this to the initial surface features. Here, the results indicate that the keyhole and its characteristic oscillations can suppress large wavelength features on the initial surface.

36 MATERIALS SCIENCE↗