Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stokes equations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Transonic Navier-Stokes wing solutions using a zonal approach. Part 2: High angle-of-attack simulation

A computer code is under development whereby the thin-layer Reynolds-averaged Navier-Stokes equations are to be applied to realistic fighter aircraft configurations. This transonic Navier-Stokes code (TNS) utilizes a zonal approach in order to treat complex geometries and satisfy in-core computer memory constraints. The zonal approach was applied to isolated wing geometries in order to facilitate code development. The TNS finite difference algorithm, zonal methodology, and code validation with experimental data is addressed. Also addressed are some numerical issues such as code robustness, efficiency, and accuracy at high angles of attack. Special free-stream-preserving metrics proved an effective way to treat H-mesh singularities over a large range of severe flow conditions, including strong leading edge flow gradients, massive shock induced separation, and stall. Furthermore, lift and drag coefficients were computed for a wing up through CLmax. Numerical oil flow patterns and particle trajectories are presented both for subcritical and transonic flow. These flow simulations are rich with complex separated flow physics and demonstrate the efficiency and robustness of the zonal approach.

Chaderjian, Neal M.↗
NASA NTRS1991

An upwind-biased space marching algorithm for supersonic viscous flow

The modifications are documented which were made to the Langley Aerothermodynamic Upwind Relaxation Algorithm which allow it to compute solutions in a space marching manner. The space marching flux is formulated to be either first- or second-order accurate, using Roe's upwind differencing or Symmetric Total Variation Diminishing differencing, respectively. The algorithm solves the thin layer Navier-Stokes equations, and is subject to the same flow restrictions as a parabolized Navier-Stokes solver. Each cross flow plane is locally iterated in time until converged, then marched in space to the next station. The algorithm is tested on a sphere-cone geometry and a geometry which models the windward side of the Space Shuttle Orbiter. Computational results for surface heating are compared to ground based experimental data. In addition, space marching predictions for surface pressure are compared against values from the original algorithm.

Greene, Francis A.↗
NASA NTRS1992

Multigrid acceleration of a fractional-step solver in generalized curvilinear coordinate systems

The efficiency of the INS3D-fractional step (FS) code has been significantly enhanced by accelerating the Poisson solver with a multigrid (MG) method. This is apparently the first implementation of the MG method for solving the 3D discrete Poisson-like equation obtained in the derivation of FS solution methods for the incompressible Navier-Stokes equations in generalized nonorthogonal coordinate systems using a staggered arrangement of the variables. The MG solver is insensitive to the geometry, even in cases of highly nonorthogonal clustered meshes, as well as to the free parameters of MG methods.

Rosenfeld, Moshe↗
NASA NTRS1992

Computation of unsteady flows over airfoils

Two methods are described for calculating unsteady flows over rapidly pitching airfoils. The first method is based on an interactive scheme in which the inviscid flow is obtained by a panel method. The boundary layer flow is computed by an interactive method that makes use of the Hilbert integral to couple the solutions of the inviscid and viscous flow equations. The second method is based on the solution of the compressible Navier-Stokes equations. The solution of these equations is obtained with an approximately factorized numerical algorithm, and with single block or multiple grids which enable grid embedding to enhance the resolution at isolated flow regions. In addition, the attached flow region can be computed by the numerical solution of compressible boundary layer equations. Unsteady pressure distributions obtained with both methods are compared with available experimental data.

Ekaterinaris, J. A.↗
NASA NTRS1994

Agglomeration multigrid for viscous turbulent flows

Agglomeration multigrid, which has been demonstrated as an efficient and automatic technique for the solution of the Euler equations on unstructured meshes, is extended to viscous turbulent flows. For diffusion terms, coarse grid discretizations are not possible, and more accurate grid transfer operators are required as well. A Galerkin coarse grid operator construction and an implicit prolongation operator are proposed. Their suitability is evaluated by examining their effect on the solution of Laplace's equation. The resulting strategy is employed to solve the Reynolds-averaged Navier-Stokes equations for aerodynamic flows. Convergence rates comparable to those obtained by a previously developed non-nested mesh multigrid approach are demonstrated, and suggestions for further improvements are given.

Mavriplis, D. J.↗
NASA NTRS1996

Simulation of Two-Fluid Flows by the Least-Squares Finite Element Method Using a Continuum Surface Tension Model

In this paper a numerical procedure for simulating two-fluid flows is presented. This procedure is based on the Volume of Fluid (VOF) method proposed by Hirt and Nichols and the continuum surface force (CSF) model developed by Brackbill, et al. In the VOF method fluids of different properties are identified through the use of a continuous field variable (color function). The color function assigns a unique constant (color) to each fluid. The interfaces between different fluids are distinct due to sharp gradients of the color function. The evolution of the interfaces is captured by solving the convective equation of the color function. The CSF model is used as a means to treat surface tension effect at the interfaces. Here a modified version of the CSF model, proposed by Jacqmin, is used to calculate the tension force. In the modified version, the force term is obtained by calculating the divergence of a stress tensor defined by the gradient of the color function. In its analytical form, this stress formulation is equivalent to the original CSF model. Numerically, however, the use of the stress formulation has some advantages over the original CSF model, as it bypasses the difficulty in approximating the curvatures of the interfaces. The least-squares finite element method (LSFEM) is used to discretize the governing equation systems. The LSFEM has proven to be effective in solving incompressible Navier-Stokes equations and pure convection equations, making it an ideal candidate for the present applications. The LSFEM handles all the equations in a unified manner without any additional special treatment such as upwinding or artificial dissipation. Various bench mark tests have been carried out for both two dimensional planar and axisymmetric flows, including a dam breaking, oscillating and stationary bubbles and a conical liquid sheet in a pressure swirl atomizer.

Wu, Jie↗
NASA NTRS1997

Admitting the Inadmissible: Adjoint Formulation for Incomplete Cost Functionals in Aerodynamic Optimization

We derive the adjoint equations for problems in aerodynamic optimization which are improperly considered as "inadmissible." For example, a cost functional which depends on the density, rather than on the pressure, is considered "inadmissible" for an optimization problem governed by the Euler equations. We show that for such problems additional terms should be included in the Lagrangian functional when deriving the adjoint equations. These terms are obtained from the restriction of the interior PDE to the control surface. Demonstrations of the explicit derivation of the adjoint equations for "inadmissible" cost functionals are given for the potential, Euler, and Navier-Stokes equations.

Arian, Eyal↗
NASA NTRS1998

Boundary and Interface Conditions for High Order Finite Difference Methods Applied to the Euler and Navier-Strokes Equations

Boundary and interface conditions for high order finite difference methods applied to the constant coefficient Euler and Navier-Stokes equations are derived. The boundary conditions lead to strict and strong stability. The interface conditions are stable and conservative even if the finite difference operators and mesh sizes vary from domain to domain. Numerical experiments show that the new conditions also lead to good results for the corresponding nonlinear problems.

Nordstrom, Jan↗
NASA NTRS1994

New Developments in the Method of Space-Time Conservation Element and Solution Element-Applications to Two-Dimensional Time-Marching Problems

A new numerical discretization method for solving conservation laws is being developed. This new approach differs substantially in both concept and methodology from the well-established methods, i.e., finite difference, finite volume, finite element, and spectral methods. It is motivated by several important physical/numerical considerations and designed to avoid several key limitations of the above traditional methods. As a result of the above considerations, a set of key principles for the design of numerical schemes was put forth in a previous report. These principles were used to construct several numerical schemes that model a 1-D time-dependent convection-diffusion equation. These schemes were then extended to solve the time-dependent Euler and Navier-Stokes equations of a perfect gas. It was shown that the above schemes compared favorably with the traditional schemes in simplicity, generality, and accuracy. In this report, the 2-D versions of the above schemes, except the Navier-Stokes solver, are constructed using the same set of design principles. Their constructions are simplified greatly by the use of a nontraditional space-time mesh. Its use results in the simplest stencil possible, i.e., a tetrahedron in a 3-D space-time with a vertex at the upper time level and other three at the lower time level. Because of the similarity in their design, each of the present 2-D solvers virtually shares with its 1-D counterpart the same fundamental characteristics. Moreover, it is shown that the present Euler solver is capable of generating highly accurate solutions for a famous 2-D shock reflection problem. Specifically, both the incident and the reflected shocks can be resolved by a single data point without the presence of numerical oscillations near the discontinuity.

Chang, Sin-Chung↗
NASA NTRS1987

Nearly two-dimensional solutions of Euler's equations

Motivated by a stretched version of the Taylor-Green initial-value problem for the Euler and Navier-Stokes equations, nearly two-dimensional incompressible flows are considered involving a single direction of slow spatial variation. A multiple-scale formulation of the problem leads by contour averaging to a system that determines the slow development in space and time. It is shown that the latter system is equivalent to an axisymmetric problem with nonstandard connection between circulation, cylindrical radius, and angular velocity component. Special solutions of the system in the exact axisymmetric case suggest that near-two-dimensionality is lost in finite time.

Childress, Stephen↗
NASA NTRS1991

Higher order accuracy for upwind methods by using the compatibility equations

A new algorithm has been developed for obtaining higher order accuracy in upwind schemes for the Euler and Navier-Stokes equations. In this method, the compatibility relations for the Euler equations are used to construct formulas for the higher order interpolates. Using these formulas, computed results are obtained for steady, inviscid flow through a nozzle and also steady, inviscid and viscous flow over an airfoil. These results are compared with results obtained by using a minmod limiter function. The comparisons show improved accuracy throughout the flow field with the use of the compatibility equations.

Goorjian, Peter M.↗
NASA NTRS1986

Transonic Navier-Stokes wing solutions using a zonal approach. Part 2: High angle-of-attack simulation

A computer code is under development whereby the thin-layer Reynolds-averaged Navier-Stokes equations are to be applied to realistic fighter-aircraft configurations. This transonic Navier-Stokes code (TNS) utilizes a zonal approach in order to treat complex geometries and satisfy in-core computer memory constraints. The zonal approach has been applied to isolated wing geometries in order to facilitate code development. Part 1 of this paper addresses the TNS finite-difference algorithm, zonal methodology, and code validation with experimental data. Part 2 of this paper addresses some numerical issues such as code robustness, efficiency, and accuracy at high angles of attack. Special free-stream-preserving metrics proved an effective way to treat H-mesh singularities over a large range of severe flow conditions, including strong leading-edge flow gradients, massive shock-induced separation, and stall. Furthermore, lift and drag coefficients have been computed for a wing up through CLmax. Numerical oil flow patterns and particle trajectories are presented both for subcritical and transonic flow. These flow simulations are rich with complex separated flow physics and demonstrate the efficiency and robustness of the zonal approach.

Chaderjian, N. M.↗
NASA NTRS1987

Research in computational fluid dynamics

The numerical integration of quasi-one-dimensional unsteady flow problems which involve finite rate chemistry are discussed, and are expressed in terms of conservative form Euler and species conservation equations. Hypersonic viscous calculations for delta wing geometries is also examined. The conical Navier-Stokes equations model was selected in order to investigate the effects of viscous-inviscid interations. The more complete three-dimensional model is beyond the available computing resources. The flux vector splitting method with van Leer's MUSCL differencing is being used. Preliminary results were computed for several conditions.

Murman, Earll M.↗
NASA NTRS1987

A low dimensional dynamical system for the wall layer

Low dimensional dynamical systems which model a fully developed turbulent wall layer were derived.The model is based on the optimally fast convergent proper orthogonal decomposition, or Karhunen-Loeve expansion. This decomposition provides a set of eigenfunctions which are derived from the autocorrelation tensor at zero time lag. Via Galerkin projection, low dimensional sets of ordinary differential equations in time, for the coefficients of the expansion, were derived from the Navier-Stokes equations. The energy loss to the unresolved modes was modeled by an eddy viscosity representation, analogous to Heisenberg's spectral model. A set of eigenfunctions and eigenvalues were obtained from direct numerical simulation of a plane channel at a Reynolds number of 6600, based on the mean centerline velocity and the channel width flow and compared with previous work done by Herzog. Using the new eigenvalues and eigenfunctions, a new ten dimensional set of ordinary differential equations were derived using five non-zero cross-stream Fourier modes with a periodic length of 377 wall units. The dynamical system was integrated for a range of the eddy viscosity prameter alpha. This work is encouraging.

Aubry, N.↗
NASA NTRS1993

Triangular spectral elements for incompressible fluid flow

We discuss the use of triangular elements in the spectral element method for direct simulation of incompressible flow. Triangles provide much greater geometric flexibility and are better conditioned and more accurate than quadrilateral elements when small angles arise. We employ a family of tensor product algorithms for triangles, allowing triangular elements to be handled with comparable arithmetic complexity to quadrilateral elements. The triangular discretizations are applied to the Poisson equation and are validated. The triangular discretizations are then applied to the incompressible Navier-Stokes equations, and a laminar channel flow solution is given. The new triangular spectral elements can be combined with standard quadrilateral elements, yielding a general and flexible high order method for complex geometries in two dimensions.

Mavriplis, Catherine↗
NASA NTRS1992

Methodology for sensitivity analysis, approximate analysis, and design optimization in CFD for multidisciplinary applications

Fundamental equations of aerodynamic sensitivity analysis and approximate analysis for the two dimensional thin layer Navier-Stokes equations are reviewed, and special boundary condition considerations necessary to apply these equations to isolated lifting airfoils on 'C' and 'O' meshes are discussed in detail. An efficient strategy which is based on the finite element method and an elastic membrane representation of the computational domain is successfully tested, which circumvents the costly 'brute force' method of obtaining grid sensitivity derivatives, and is also useful in mesh regeneration. The issue of turbulence modeling is addressed in a preliminary study. Aerodynamic shape sensitivity derivatives are efficiently calculated, and their accuracy is validated on two viscous test problems, including: (1) internal flow through a double throat nozzle, and (2) external flow over a NACA 4-digit airfoil. An automated aerodynamic design optimization strategy is outlined which includes the use of a design optimization program, an aerodynamic flow analysis code, an aerodynamic sensitivity and approximate analysis code, and a mesh regeneration and grid sensitivity analysis code. Application of the optimization methodology to the two test problems in each case resulted in a new design having a significantly improved performance in the aerodynamic response of interest.

Taylor, Arthur C., III↗
NASA NTRS1993

The dependence of the dissipation on rotation

A form of the evolution equation for the dissipation showing the effects of rotation is derived directly from the Navier-Stokes equations. Rotation affects the dissipation if the flow is inhomogeneous or compressible. This is due to the fact that pressure scales with inverse Rossby number and certain pressure correlations usually neglected have to be retained when Re Ro is approximately equal to 1. The term reflecting the effects of rotation on the dissipation is a volume integral of the two-point velocity correlation similar in structure to the 'rapid-pressure' correlation appearing in the second-moment equations. Some of its properties are indicated.

Ristorcelli, J. R.↗
NASA NTRS2002

The Delta x B = 0 Constraint Versus Minimization of Numerical Errors in MHD Simulations

The MHD equations are a system of non-strictly hyperbolic conservation laws. The non-convexity of the inviscid flux vector resulted in corresponding Jacobian matrices with undesirable properties. It has previously been shown by Powell et al. (1995) that an 'almost' equivalent MHD system in non-conservative form can be derived. This non-conservative system has a better conditioned eigensystem. Aside from Powell et al., the MHD equations can be derived from basic principles in either conservative or non-conservative form. The Delta x B = 0 constraint of the MHD equations is only an initial condition constraint, it is very different from the incompressible Navier-Stokes equations in which the divergence condition is needed to close the system (i.e., to have the same number of equations and the same number of unknown). In the MHD formulations, if Delta x B = 0 initially, all one needs is to construct appropriate numerical schemes that preserve this constraint at later time evolutions. In other words, one does not need the Delta x B condition to close the MHD system. We formulate our new scheme together with the Cargo & Gallice (1997) form of the MHD approximate Riemann solver in curvilinear grids for both versions of the MHD equations. A novel feature of our new method is that the well-conditioned eigen-decomposition of the non-conservative MHD equations is used to solve the conservative equations. This new feature of the method provides well-conditioned eigenvectors for the conservative formulation, so that correct wave speeds for discontinuities are assured. The justification for using the non-conservative eigen-decomposition to solve the conservative equations is that our scheme has a better control of the numerical error associated with the divergence of the magnetic condition. Consequently, computing both forms of the equations with the same eigen-decomposition is almost equivalent. It will be shown that this approach, using the non-conservative eigensystem when solving the conservative equations, also works well in the context of standard shock-capturing schemes.

Yee, H. C.↗