Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solar Cell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Radiation damage in proton irradiated indium phosphide solar cells

Indium phosphide solar cells exposed to 10 MeV proton irradiations were found to have significantly greater radiation resistance than either GaAs or Si. Performance predictions were obtained for two proton dominated orbits and one in which both protons and electrons were significant cell degradation factors. Array specific power was calculated using lightweight blanket technology, a SEP array structure, and projected cell efficiencies. Results indicate that arrays using fully developed InP cells should out-perform those using GaAs or Si in orbits where radiation is a significant cell degradation factor.

Weinberg, I.↗

Comparative radiation resistance, temperature dependence and performance of diffused junction indium phosphide solar cells

Indium phosphide solar cells whose p-n junctions were processed by the open tube capped diffusion and by the closed tube uncapped diffusion of sulfur into Czochralski-grown p-type substrates are compared. Differences found in radiation resistance were attributed to the effects of increased base dopant concentration. Both sets of cells showed superior radiation resistance to that of gallium arsenide cells, in agreement with previous results. No correlation was, however, found between the open-circuit voltage and the temperature dependence of the maximum power.

Weinberg, I.↗

InP shallow-homojunction solar cells

Indium phosphide solar cells with very thin n-type emitters have been made by both ion implantation and metalorganic chemical vapor deposition. Air mass zero efficiencies as high as 18.8 percent (NASA measurement) have been achieved. Although calculations show that, as is the case with GaAs, a heterostructure is expected to be required for the highest efficiencies attainable, the material properties of InP give the shallow-homojunction structure a greater potential than in the case of GaAs. The best cells, which were those made by ion implantation, show open-circuit voltage (V sub oc) of 873 mV, short-circuit current of 357 A/sq m (35.7 mA/sq cm), and fill factor of 0.829. Improvements are anticipated in all three of these parameters. Internal quantum efficiency peaks at over 90 percent in the red end of the spectrum, but drops to 54 percent in the blue end. Other cells have achieved 74 percent in the blue end. Detailed modeling of the data indicates that a high front surface recombination velocity is responsible for the low blue response, that the carrier lifetime is high enough to allow good carrier collection from both the base and the emitter, and that the voltage is base-limited.

Keavney, Christopher↗

Radiation effects in heteroepitaxial InP solar cells

Heteroepitaxial InP solar cells, with GaAs substrates, were irradiated by 0.5 and 3 MeV protons and their performance, temperature dependency, and carrier removal rates determined as a function of fluence. The radiation resistance of the present cells was significantly greater than that of non-heteroepitaxial InP cells at both proton energies. A clear difference in the temperature dependency of V(sub oc), was observed between heteroepitaxial and homoepitaxial InP cells. The analytically predicted dependence of dV(sub oc)/dT on Voc was confirmed by the fluence dependence of these quantities. Carrier removal was observed to increase with decreasing proton energy. The results obtained for performance and temperature dependency were attributed to the high dislocation densities present in the heteroepitaxial cells while the energy dependence of carrier removal was attributed to the energy dependence of proton range.

Weinberg, I.↗

Exceeding 20% Efficiency with in situ Group V Doping in Polycrystalline CdTe Solar Cells

CdTe-based solar technology has achieved one of the lowest levelized costs of electricity among all energy sources as well as state-of-the-art field stability. Yet, there is still ample headroom to improve. For decades, mainstream technology has combined fast CdTe deposition with a CdCl2 anneal and Cu doping. The resulting defect chemistry is strongly compensated and limits the useful hole density to ~10^14 cm-3, creating a ceiling for fill factor, photovoltage and efficiency. In addition, Cu easily changes energy states and diffuses spatially, creating a risk of instabilities that must be managed with care. Here, we demonstrate a significant shift by doping polycrystalline CdSexTe1-x and CdTe films with As while removing Cu entirely from the solar cell. The absorber majority-carrier density is increased by orders of magnitude to 10^16-10^17 cm-3 without compromising the lifetime, and is coupled with a high photocurrent greater than 30 mA cm-2. We demonstrate pathways for fast dopant incorporation in polycrystalline thin films, improved stability and 20.8% solar cell efficiency.

14 SOLAR ENERGY↗

Metallization for large-area solar cells

In large area, low cost solar cells of any type, the contact and grid structure metallization is an important factor which has an effect on the efficiency of the solar cell and its reliability. The present investigation is concerned with aspects of solar cell efficiency. An optimized metallization design leads to minimum total power loss, which is related to a simultaneous minimization of ohmic voltage drops and of shading of the front surface of the cell by the overlaid metal. The requirements regarding the design for a low-loss metallization pattern for the front surface of large area solar cells are represented by a set of design rules listed in a table. The total shading and voltage drop on such cells can be held to about 5%. However, not every metallization process is suited for meeting the requirements of the low-cost design. The low losses can be achieved only by use of several bus lines containing a bulk conductor, such as a wire.

Wolf, M.↗

Carrier collection losses in interface passivated amorphous silicon thin-film solar cells

In silicon thin-film solar cells the interface between the i- and p-layer is the most critical. In the case of back diffusion of photogenerated minority carriers to the i/p-interface, recombination occurs mainly on the defect states at the interface. To suppress this effect and to reduce recombination losses, hydrogen plasma treatment (HPT) is usually applied. As an alternative to using state of the art HPT we apply an argon plasma treatment (APT) before the p-layer deposition in n-i-p solar cells. To study the effect of APT, several investigations were applied to compare the results with HPT and no plasma treatment at the interface. Carrier collection losses in resulting solar cells were examined with spectral response measurements with and without bias voltage. To investigate single layers, surface photovoltage and X-ray photoelectron spectroscopy (XPS) measurements were conducted. The results with APT at the i/p-interface show a beneficial contribution to the carrier collection compared with HPT and no plasma treatment. Therefore, it can be concluded that APT reduces the recombination centers at the interface. Further, we demonstrate that carrier collection losses of thin-film solar cells are significantly lower with APT.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Applications of atomic layer deposition and chemical vapor deposition for perovskite solar cells

Metal halide perovskite solar cells (PSCs) have rapidly evolved over the past decade to become a photovoltaic technology on the cusp of commercialization. In the process, numerous fabrication strategies have been explored with the goal of simultaneously optimizing for device efficiency, stability, and scalability. Atomic layer deposition (ALD) and chemical vapor deposition (CVD) have proven to be effective tools for the fabrication of various components of PSCs. This review article examines the application of ALD and CVD for the deposition and modification of charge transport layers, passivation layers, absorber materials, encapsulants, and electrodes. It outlines the use of these vapor deposition techniques in state-of-the-art, multi-junction solar cell devices, and also contains a discussion of the stability of metal halide perovskite materials under ALD and CVD conditions based on in situ characterization reported in literature. Finally, this article concludes with insights into future ALD and CVD research directions that could be undertaken to further aid the deployment of PSCs in emerging solar photovoltaic markets.

14 SOLAR ENERGY↗

High work function MoO2 back contacts for improved solar cell performance

Improved high work function back contacts for solar cells are provided. In one aspect, a method of forming a solar cell includes: forming a completed solar cell having a substrate coated with an electrically conductive material, an absorber disposed on the electrically conductive material, a buffer layer disposed on the absorber, a transparent front contact disposed on the buffer layer, and a metal grid disposed on the transparent front contact; removing the substrate and the electrically conductive material using exfoliation, exposing a backside surface of the solar cell; depositing a high work function material onto the back side surface of the solar cell; and depositing a back contact onto the high work function material. A solar cell formed by the present techniques is also provided. Yield of the exfoliated device can be improved by removing bubbles from adhesive used for exfoliation and/or forming contact pads to access the metal grid.

14 SOLAR ENERGY↗

High work function MoO2 back contacts for improved solar cell performance

Improved high work function back contacts for solar cells are provided. In one aspect, a method of forming a solar cell includes: forming a completed solar cell having a substrate coated with an electrically conductive material, an absorber disposed on the electrically conductive material, a buffer layer disposed on the absorber, a transparent front contact disposed on the buffer layer, and a metal grid disposed on the transparent front contact; removing the substrate and the electrically conductive material using exfoliation, exposing a backside surface of the solar cell; depositing a high work function material onto the back side surface of the solar cell; and depositing a back contact onto the high work function material. A solar cell formed by the present techniques is also provided. Yield of the exfoliated device can be improved by removing bubbles from adhesive used for exfoliation and/or forming contact pads to access the metal grid.

Antunez, Priscilla D.↗

High‐Performance Semitransparent Ternary Organic Solar Cells

Abstract Semitransparent organic solar cells (STOSCs) are ideal candidates for building‐integrated photovoltaics. Power conversion efficiency (PCE) is one of the most important parameters of STOSCs, which is typically limited by the intrinsic narrow absorption of thin active layer. Ternary structure is demonstrated as an efficient approach to broaden the light absorption and manipulate the morphology, thus leading to improved PCEs by introducing a third component into the binary system. However, STOSCs based on ternary systems are rarely studied. In this contribution, semitransparent ternary solar cells are fabricated using a wide‐bandgap ( E g = 2.10 eV) polymer donor, PBT1‐S, as the third component. It is found that the addition of a small amount of PBT1‐S to PTB7‐Th:PC 71 BM blend has a negligible influence on its average visible transmittance (AVT) and color perception. A PCE of 9.2% is achieved for the champion ternary device with 20% AVT, which is one of the highest values for STOSCs. The results indicate that ternary structure is a promising approach for the fabrication of high‐performance STOSCs.

Xie, Yuanpeng↗

Comprehensive Study of Carrier Recombination in High‐Efficiency CdTe Solar Cells Using Transient Photovoltage

Cadmium telluride (CdTe) solar cells represent a commercially successful photovoltaic technology, with an annual production capacity approaching 20 GW. However, improving the open-circuit voltage (V OC ) remains challenging. This study aims to deepen the understanding of charge carrier recombination in CdTe solar cells and to explore alternative dynamical characterization methods that address the limitations found in conventionally used time-resolved photoluminescence for CdTe solar cells. Transient photovoltage and transient photocurrent techniques are utilized to investigate charge carrier dynamics under conditions resembling real-world solar cell operation. The results reveal that an effective nonradiative recombination lifetime of 580 ns dominates the charge dynamics at VOC values below 850 mV. Above this threshold, radiative recombination becomes significant, with a radiative recombination coefficient of 1.1 × 10 −9 cm 3 s −1 . Additionally, the stationary charge carrier density at 1 sun is determined to be around 1 × 10 14 cm −3 . By accurately determining both radiative and nonradiative recombination, this work provides a comprehensive understanding of carrier dynamics in high-performing CdTe devices and paves the way for improving the V OC and performance of CdTe solar cells.

CdTe solar cells↗

Ion Implantation with in-situ Patterning for IBC Solar Cells

Interdigitated back-side Contact (IBC) solar cells are the highest efficiency silicon solar cells currently on the market. Unfortunately the cost to produce these solar cells is also very high, due to the large number of processing steps required. Varian believes that only the combination of high efficiency and low cost can meet the stated goal of $1/Wp. The core of this program has been to develop an in-situ patterning capability for an ion implantation system capable of producing patterned doped regions for IBC solar cells. Such a patterning capable ion implanter can reduce the number of process steps required to manufacture IBC cells, and therefore significantly reduce the cost. The present program was organized into three phases. Phase I was to select a patterning approach and determine the patterning requirements for IBC cells. Phase II consists of construction of a Beta ion implantation system containing in-situ patterning capability. Phase III consists of shipping and installation of the ion implant system in a customer factory where it will be tested and proven in a pilot production line.

14 SOLAR ENERGY↗

Donor polymer design enables efficient non-fullerene organic solar cells

To achieve efficient organic solar cells, the design of suitable donor–acceptor couples is crucially important. State-of-the-art donor polymers used in fullerene cells may not perform well when they are combined with non-fullerene acceptors, thus new donor polymers need to be developed. Here we report non-fullerene organic solar cells with efficiencies up to 10.9%, enabled by a novel donor polymer that exhibits strong temperature-dependent aggregation but with intentionally reduced polymer crystallinity due to the introduction of a less symmetric monomer unit. Our comparative study shows that an analogue polymer with a C2 symmetric monomer unit yields highly crystalline polymer films but less efficient non-fullerene cells. Based on a monomer with a mirror symmetry, our best donor polymer exhibits reduced crystallinity, yet such a polymer matches better with small molecular acceptors. This study provides important insights to the design of donor polymers for non-fullerene organic solar cells.

Science & Technology - Other Topics↗

Laser Ablation for Low-Cost Multijunction III-V Solar Cell Mesa Isolations

Eliminating photolithography from solar cell processing is a significant opportunity for cost reduction for III-V solar cells. In this work, we test femtosecond laser ablation and scribing as an alternative to contact photolithography and wet chemical etching for mesa isolation, when processing multijunction cells. We demonstrate that upright multijunction solar cells isolated by using the laser as a scribe to cleave through the substrate had virtually no performance loss when compared to a baseline cell processed with photolithography. By contrast, cells isolated by laser ablating through the active layers have performance losses that cannot be fully eliminated with post-processing etches. This demonstration of photolithography-free mesa isolation with no performance losses is promising for less expensive III-V manufacturing.

14 SOLAR ENERGY↗