Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SWITCHES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Operation of a semiconductor opening switch at the pumping time of a microsecond and low current density

The mechanism of operation of a semiconductor opening switch (a SOS diode) at the forward-pumping time of a microsecond and low current density was studied. The current's cutoff time shorter than 10 ns at the voltage across the SOS diode as high as 80 kV was obtained experimentally at the reverse-pumping time {approx}200 ns and the cutoff-current density of about 120 A/cm{sup 2}. These are the results of numerical simulation of processes in the dynamics of the electron-hole plasma in the diode at the stages of pumping and current cutoff. It is shown that the stage of the current cutoff is similar to the conditions of the SOS effect observed at a high current density and is also related to motion of the concentration front of excess plasma along the heavily doped p-type region of the structure. In spite of the low density of current in the course of its cutoff, the switching process takes several nanoseconds. The reason is that the low current density is compensated by a low concentration of the excess plasma at the front, which retains the high velocity of motion of this front at the stage of the current cutoff.

36 MATERIALS SCIENCE↗

Electrically Controlled Logical Switch Based on a Step Yttrium–Iron Garnet Waveguide and a Piezoelectric Actuator

We have demonstrated the possibility of functioning a device based on a spin-wave waveguide containing two channels with different ferrite film thicknesses as a logical switch. For switching states, we have used the dependence of interference type (constructive or destructive) at the output converter common for two channels on the waveguide strain under action of the electrically controlled actuator.

30 DIRECT ENERGY CONVERSION↗

A Phase Switch for Electromagnetically Induced Gratings in a Medium with Λ Atoms

We have theoretically studied the possibility of using the phenomenon of phase switching of coherent population trapping for creating a switch of light propagation direction in electromagnetically induced gratings in a medium with Λ-atoms. The permissible region of this effect application is determined and the parameters are found which ensure the obtaining of a high-efficiency scheme of the spatial redistribution of probing field intensity on atomic density gratings.

74 ATOMIC AND MOLECULAR PHYSICS↗

Convex Relaxations for Quadratic On/Off Constraints and Applications to Optimal Transmission Switching

This paper studies mixed-integer nonlinear programs featuring disjunctive constraints and trigonometric functions and presents a strengthened version of the convex quadratic relaxation of the optimal transmission switching problem. We first characterize the convex hull of univariate quadratic on/off constraints in the space of original variables using perspective functions. Next, we introduce new tight quadratic relaxations for trigonometric functions featuring variables with asymmetrical bounds. These results are used to further tighten recent convex relaxations introduced for the optimal transmission switching problem in power systems. Using the proposed improvements, along with bound propagation, on 23 medium-sized test cases in the PGLib benchmark library with a relaxation gap of more than 1%, we reduce the gap to less than 1% on five instances. The tightened model has promising computational results when compared with state-of-the-art formulations.

97 MATHEMATICS AND COMPUTING↗

Laser-induced Bessel beams can realize fast all-optical switching in gold nanosol prepared by pulsed laser ablation

We demonstrate the possibility of realizing, all-optical switching in gold nanosol. Two overlapping laser beams are used for this purpose, due to which a low-power beam passing collinear to a high-power beam will undergo cross phase modulation and thereby distort the spatial profile. This is taken to advantage for performing logic operations. We have also measured the threshold pump power to obtain a NOT gate and the minimum response time of the device. Contrary to the general notion that the response time of thermal effects used in this application is of the order of milliseconds, we prove that short pump pulses can result in fast switching. Different combinations of beam splitters and combiners will lead to the formation of other logic functions too.

36 MATERIALS SCIENCE↗

Structural mechanism for modulation of functional amyloid and biofilm formation by Staphylococcal Bap protein switch

The Staphylococcal Bap proteins sense environmental signals (such as pH, [Ca 2+ ]) to build amyloid scaffold biofilm matrices via unknown mechanisms. We here report the crystal structure of the aggregation-prone region of Staphylococcus aureus Bap which adopts a dumbbell-shaped fold. The middle module (MM) connecting the N-terminal and C-terminal lobes consists of a tandem of novel double-Ca 2+ -binding motifs involved in cooperative interaction networks, which undergoes Ca 2+ -dependent order-disorder conformational switches. The N-terminal lobe is sufficient to mediate amyloid aggregation through liquid-liquid phase separation and maturation, and subsequent biofilm formation under acidic conditions. Such processes are promoted by disordered MM at low [Ca 2+ ] but inhibited by ordered MM stabilized by Ca 2+ binding, with inhibition efficiency depending on structural integrity of the interaction networks. Furthermore, these studies illustrate a novel protein switch in pathogenic bacteria and provide insights into the mechanistic understanding of Bap proteins in modulation of functional amyloid and biofilm formation, which could be implemented in the anti-biofilm drug design.

59 BASIC BIOLOGICAL SCIENCES↗

Plasma Switch for High-Power Active Pulse Compressor

Results are presented from experiments carried out at the Naval Research Laboratory X-band magnicon facility on a two-channel X-band active RF pulse compressor that employed plasma switches. Experimental evidence is shown to validate the basic goals of the project, which include: simultaneous firing of plasma switches in both channels of the RF circuit, operation of quasi-optical 3-dB hybrid directional coupler coherent superposition of RF compressed pulses from both channels, and operation of the X-band magnicon directly in the RF pulse compressor. For incident 1.2 μs pulses in the range 0.63 - 1.35 MW, compressed pulses of peak powers 5.7 - 11.3 MW were obtained, corresponding to peak power gain ratios of 8.3 - 9.3. Insufficient bakeout and conditioning of the high-power RF circuit prevented experiments from being conducted at higher RF input power levels.

43 PARTICLE ACCELERATORS↗

Electron-Beam Switches For A High Peak Power Sled-II Pulse Compressor

Omega-P demonstrated triggered electron-beam switches on the L=2 m dual-delay-line X-band pulse compressor at Naval Research Laboratory (NRL). In those experiments, with input pulses of up to 9 MW from the Omega-P/NRL X-band magnicon, output pulses having peak powers of 140-165 MW and durations of 16-20 ns were produced, with record peak power gains M of 18-20. Switch designs are described based on the successful results that should be suitable for use with the existing SLAC SLED-II delay line system, to demonstrate C=9, M=7, and n>>78%, yielding 173ns compressed pulses with peak powers up to 350MW with input of a single 50-MW.

43 PARTICLE ACCELERATORS↗

Evaluation of High Rotor Pole Switched Reluctance Motors to Control Condenser Fans in a Commercial Refrigeration System

A high rotor pole switched reluctance motor (HRSRM) designed by Software Motor Corporation was evaluated for use as a condenser fan motor due to its reported high motor efficiency over a broad range of speeds and added advanced control potential. The project was split into two phases; the first of which was to determine the direct energy savings due to the increased motor efficiency, the second was to leverage the additional benefits of the energy efficiency measure (EEM) to create additional energy savings. This report only discusses results from the first phase of the project. Nine 1.5hp HRSRMs were installed parallel to the same number of legacy induction motors of a supermarket commercial refrigeration system located in Lakeside, Colorado. At this site, the 1.5 hp legacy motors had historically adjusted condenser fan speed from 200-870 rpm based on outdoor air temperature and compressor discharge pressure. This type of control is known as variable head pressure control (VHPC). These nine new motors were given a signal from the legacy variable frequency drive (VFD) to match the motor speed of the legacy motors. Determination of the energy savings of the EEM was performed over a two-month period, at which time a correlation between legacy and EEM power consumption was developed based on motor speed. Annual data that had been collected from 2016-2017 (before the two-month test period) was then leveraged to predict the annual energy savings of the EEM for a complete retrofit using both VHPC and constant fan speed control. Table 1 displays the quantitative results. The EEM saved 27% of total energy consumption of the condenser fan motors for constant fan speed control, while the energy savings increased to 32% when using VHPC. This was due to the improved motor efficiency of the HRSR motor at low speeds. While the constant speed fan control kept the motors running at 870 rpm, VHPC adjusted fan speed between 200-870rpm based on the outdoor air temperature and the compressor discharge pressure. These savings are assuming a direct replacement with no additional controls. Retrofitting a constant speed fan control system with HRSRMs and switching to VHPC would provide significant energy savings looking at the condenser alone. Additional considerations of the EEM were noted during the project as well. The HRSRM system made it possible to identify and remotely shutdown an individual motor when a piece of foam locked the fan and thereby the motor. With the traditional system, a locked rotor could have caused motor damage unless a breaker or fuse was activated. Furthermore, due to vibration complaints from the installation technicians, the ramp-up time of the HRSRM had to be increased to a minute. After implementing this change no complaints for excessive vibration were recorded.

15 GEOTHERMAL ENERGY↗

Diffraction-Based Optical Switching with MEMS

In this article, we are presenting an overview of MEMS-based (Micro-Electro-Mechanical System) optical switch technology starting from the reflective two-dimensional (2D) and three-dimensional (3D) MEMS implementations. To further increase the speed of the MEMS from these devices, the mirror size needs to be reduced. Small mirror size prevents efficient reflection but favors a diffraction-based approach. Two implementations have been demonstrated, one using the Texas Instruments DLP (Digital Light Processing), and the other an LCoS-based (Liquid Crystal on Silicon) SLM (Spatial Light Modulator). These switches demonstrated the benefit of diffraction, by independently achieving high speed, efficiency, and high number of ports. We also demonstrated for the first time that PSK (Phase Shift Keying) modulation format can be used with diffraction-based devices. To be truly effective in diffraction mode, the MEMS pixels should modulate the phase of the incident light. We are presenting our past and current efforts to manufacture a new type of MEMS where the pixels are moving in the vertical direction. The original structure is a 32 x 32 phase modulator array with high contrast grating pixels, and we are introducing a new sub-wavelength linear array capable of a 310 kHz modulation rate

36 MATERIALS SCIENCE↗

Ames Lab 101: Ultrafast Magnetic Switching

Ames Laboratory physicists have found a new way to switch magnetism that is at least 1000 times faster than currently used in magnetic memory technologies. Magnetic switching is used to encode information in hard drives, magnetic random access memory and other computing devices. The discovery potentially opens the door to terahertz and faster memory speeds.

36 MATERIALS SCIENCE↗

Optical Switching in VO2 films by below-gap excitation

We study the photo-induced insulator-metal transition in VO2, correlating threshold and dynamic evolution with excitation wavelength. In high-quality single crystal samples, we find that switching can only be induced with photon energies above the 670-meV gap. This contrasts with the case of polycrystalline films, where formation of the metallic state can also be triggered with photon energies as low as 180 meV, well below the bandgap. Perfection of this process may be conducive to novel schemes for optical switches, limiters and detectors, operating at room temperature in the mid-IR.

36 MATERIALS SCIENCE↗

Hybrid MOSFET/Driver for Ultra-Fast Switching

The ultra-fast switching of power MOSFETs, in {approx}1ns, is very challenging. This is largely due to the parasitic inductance that is intrinsic to commercial packages used for both MOSFETs and drivers. Parasitic gate and source inductance not only limit the voltage rise time on the MOSFET internal gate structure but can also cause the gate voltage to oscillate. This paper describes a hybrid approach that substantially reduces the parasitic inductance between the driver and MOSFET gate as well as between the MOSFET source and its external connection. A flip chip assembly is used to directly attach the die-form power MOSFET and driver on a PCB. The parasitic inductances are significantly reduced by eliminating bond wires and minimizing lead length. The experimental results demonstrate ultra-fast switching of the power MOSFET with excellent control of the gate-source voltage.

42 ENGINEERING↗

Multiphase soft switched DC/DC converter and active control technique for fuel cell ripple current elimination

DC/DC converter has a transformer having primary coils connected to an input side and secondary coils connected to an output side. Each primary coil connects a full-bridge circuit comprising two switches on two legs, the primary coil being connected between the switches on each leg, each full-bridge circuit being connected in parallel wherein each leg is disposed parallel to one another, and the secondary coils connected to a rectifying circuit. An outer loop control circuit that reduces ripple in a voltage reference has a first resistor connected in series with a second resistor connected in series with a first capacitor which are connected in parallel with a second capacitor. An inner loop control circuit that reduces ripple in a current reference has a third resistor connected in series with a fourth resistor connected in series with a third capacitor which are connected in parallel with a fourth capacitor.

30 DIRECT ENERGY CONVERSION↗

Probing local and global ferroelectric phase stability and polarization switching in ordered macroporous PZT

We describe the characterization, ferroelectric phase stability and polarization switching in strain-free macroscopic assemblies of 50-100 nm wide PbZr0.3Ti0.7O3 (PZT) nanostructures (ferroelectric nanosponges). The structures present uniquely large areas and volumes of PZT where the microstructure is spatially modulated and the composition is homogeneous. Variable temperature powder X-ray diffraction (XRD) studies show that the global structure is tetragonal at room temperature and undergoes a reversible tetragonal to cubic phase transition on heating/cooling. Our studies indicate that this transition temperature is 30-50 C lower than unstructured PZT of the same composition. To characterize and confirm that the structures are ferroelectric we have utilized piezoresponse force spectroscopy and we demonstrate that the switching polarization can be spatially mapped within the structures. Corresponding polarization distributions have been calculated for the bulk and nanostructured materials using a two-parameter direct variational method based on Landau-Ginzburg-Devonshire equation. Our studies correlate global and local characterization of ferroelectric nanostructures revealing that in the nanosponges tetragonal and ferroelectric PZT is stabilized and open a pathway for effective studies of nanoscale ferroelectrics in large volumes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Reversible switching of liquid crystalline order permits synthesis of homogeneous populations of dipolar patchy microparticles

The spontaneous positioning of colloids on the surfaces of micrometer-sized liquid crystal (LC) droplets and their subsequent polymerization offers the basis of a general and facile method for the synthesis of patchy microparticles. The existence of multiple local energetic minima, however, can generate kinetic traps for colloids on the surfaces of the LC droplets and result in heterogeneous populations of patchy microparticles. To address this issue, in this paper it is demonstrated that adsorbate-driven switching of the internal configurations of LC droplets can be used to sweep colloids to a single location on the LC droplet surfaces, thus resulting in the synthesis of homogeneous populations of patchy microparticles. The surface-driven switching of the LC can be triggered by addition of surfactant or salts, and permits the synthesis of dipolar microparticles as well as “Janus-like” microparticles. Finally, by using magnetic colloids, the utility of the approach is illustrated by synthesizing magnetically responsive patchy microdroplets of LC with either dipolar or quadrupolar symmetry that exhibit distinct optical responses upon application of an external magnetic field.

36 MATERIALS SCIENCE↗

Mechanical Switching of Nanoscale Multiferroic Phase Boundaries

Tuning the lattice degree of freedom in nanoscale functional crystals is critical to exploit the emerging functionalities such as piezoelectricity, shape-memory effect, or piezomagnetism, which are attributed to the intrinsic lattice-polar or lattice-spin coupling. In this study, it is reported that a mechanical probe can be a dynamic tool to switch the ferroic orders at the nanoscale multiferroic phase boundaries in BiFeO 3 with a phase mixture, where the material can be reversibly transformed between the “soft” tetragonal-like and the “hard” rhombohedral-like structures. The microscopic origin of the nonvolatile mechanical switching of the multiferroic phase boundaries, coupled with a reversible 180° rotation of the in-plane ferroelectric polarization, is the nanoscale pressure-induced elastic deformation and reconstruction of the spontaneous strain gradient across the multiferroic phase boundaries. The reversible control of the room-temperature multiple ferroic orders using a pure mechanical stimulus may bring us a new pathway to achieve the potential energy conversion and sensing applications.

36 MATERIALS SCIENCE↗

Latent Mechanisms of Polarization Switching from In Situ Electron Microscopy Observations

In situ scanning transmission electron microscopy enables observation of the domain dynamics in ferroelectric materials as a function of externally applied bias and temperature. The resultant data sets contain a wealth of information on polarization switching and phase transition mechanisms. However, identification of these mechanisms from observational data sets has remained a problem due to a large variety of possible configurations, many of which are degenerate. Here, an approach based on a combination of deep learning-based semantic segmentation, rotationally invariant variational autoencoder (VAE), and non-negative matrix factorization to enable learning of a latent space representation of the data with multiple real-space rotationally equivalent variants mapped to the same latent space descriptors is introduced. By varying the size of training sub-images in the VAE, the degree of complexity in the structural descriptors is tuned from simple domain wall detection to the identification of switching pathways. Importantly, this yields a powerful tool for the exploration of the dynamic data in mesoscopic electron, scanning probe, optical, and chemical imaging. Moreover, this work adds to the growing body of knowledge of incorporating physical constraints into the machine and deep-learning methods to improve learned descriptors of physical phenomena.

36 MATERIALS SCIENCE↗