Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “S-BAND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

NISAR flight feed assembly measurement campaign

NISAR (NASA ISRO SAR, National Aeronautics and Space Administration, Indian Space Research Organization, Synthetic Aperture Radar) is an Earth science project currently in its final development phase at NASA Jet Propulsion Laboratory (JPL) and at ISRO. Due for launch in 2022, it will assess how our planet changes overtime by measuring differences in the Earth’s solid surface due to factors like climate change, movement and melting of glaciers, earthquakes, land-slides, deforestation, agriculture and others. The enabling instrument for this mission is a dual band radar (L-Band and S-Band) that feeds a 12m deployable mesh reflector. This paper describes the antenna measurement campaign of the L-Band feed array developed at JPL. The SBand feed array is developed by ISRO and is not part of this paper. While Measurements of the Engineering Model have been published before, this paper focuses on the first measurements done with the Flight Model.

Harrell, Jefferson A.↗

Impact of Gaps in the NASA-ISRO SAR Mission Swath

The NASA-ISRO Synthetic Aperture Radar (NISAR) mission will carry L-band and S-band SAR instruments, each with a 240 km swath width. The L-band instrument has the capability to map the entire Earth’s land and ice covered surfaces from both ascending and descending orbit positions, continuously in an exact 12 day repeating cycle, given temporally dense (better than 6-day on average) sampling of Earth over the life of the mission. To achieve this swath coverage without loss of resolution or polarimetric capability, NISAR uses a reflector-feed based antenna system with scan-on-receive (“SweepSAR”) capability. One of the characteristics of SweepSAR is that the pulse repetition interval of the radar is shorter than the echo receive window for the 240 km swath. Therefore, transmit events occur during the receive window and the receivers must be blanked periodically, creating gaps in the coverage. For fixed pulse rate operations, these gaps are persistent strips of blanked ranges. NISAR is being designed to allow variation of the pulse rate in order to spread out these gaps throughout the synthetic aperture, but processing these variably-acquired data is more challenging and can lead to compromises in image quality. At the highest level NISAR places requirements on science measurements rather than image quality, so there is often a debate among science and engineering team members as to whether to operate with fixed pulse rates – leading to range strips consistently blank from cycle to cycle but with optimal image quality – or to vary the pulse rate, fill in the gaps, and live with degraded image quality. NISAR’s performance team has shown that science requirements can be met with the gaps. However, scientists are eager for maximum and coverage within a swath. A companion paper (Villano et al.) describes image quality for NISAR using a variable PRF approach, but does not go further to science requirements. This paper explores the issues when gaps are present in the swath due to fixed PRF operations.

Veeramachaneni, Chandini↗

Design Principles for Smallsat SARs

Synthetic Aperture Radar (SAR) is by now a mature remote sensing technique to obtain spatially-resolved radar measurements of terrain. Currently, SAR image data are readily available from an ever-expanding multitude of SAR satellites in Earth orbit. Many spaceborne SAR systems currently in use or planned for the near-term are multifunctional: their designs tend to maximize the menu of image modes available to the end user. They also follow fairly conventional design principles, laid down decades ago, that lead almost inevitably to large antennas and even larger spacecraft. This raises the question: how does one go about designing a SAR system that fits in a Smallsat (<200 kg) form factor? The design principles for Smallsat SARs outlined in this paper have been developed over a twenty-year period in architecting Earth-orbiting SARs such as NASA/JPL’s NISAR and ESA’s Biomass mission, as well as planetary SAR mission concepts. Example mission concepts following this approach will be presented at the end of the paper. These include an S-Band Smallsat geodetic constellation to measure surface deformation, as called for by the 2018 National Academy Decadal Survey for Earth Observation from Space. Another example is a Ka-band cubesat-sized system designed to detect changes on Earth’s surface.

Freeman, Anthony↗

Ka-band High-Rate Downlink System for the NISAR Mission

This paper provides a description and analyses of the high-rate Ka-band telecom system for the upcoming NISAR (NASA-ISRO Synthetic Aperture Radar) mission. NISAR is a collaborative Earth-Science mission between National Aeronautics and Space Administration (NASA) and Indian Space Research Organization (ISRO), which features an L-band SAR instrument and an S-band SAR instrument. The simultaneous dual-frequency radar system at peak rates will produce data at gigabit-per-second speeds, which drives the data-volume requirements. The key driving requirement for the payload communication subsystem is to provide a minimum of 26 Terabits per day of radar science data to the ground. The high-rate transmitter on the flight system is a software-defined radio developed at the Jet Propulsion Laboratory (JPL), based on the Universal Space Transponder platform, providing an offset quadrature phase shift key modulated waveform with Low-Density Parity-Check encoding of the data transfer frames. Two transmitters used in a dual-polarization configuration with each transmitter providing two giga-symbols per second (Gsps) of coded data provides an aggregate rate of four Gsps. In this system, only one watt of signal power is necessary on each polarization to overcome propagation losses and achieve a successful RF link. Several Near Earth Network (NEN) ground station sites (Alaska in the United States, Svalbard in Norway, and Punta Arenas in Chile) are baselined for the space-to-Earth communications link. Each ground station will also feature multiple upgrades to support NISAR’s transmission starting with new Ka-band antennas, wideband downconverters and high-rate receivers. In addition, a baseband data processor called Data Acquisition Processor and Handling Network Environment (DAPHNE), newly developed by the NEN, provides data storage and connectivity to backhaul networks. With NISAR’s large quantities of data (over 3.5 Petabytes over the mission), the processing of science data will be primarily performed on a cloud system to reduce the overall cost to the mission. The system described herein will be the first operational use of Gsps-class downlink rates on an Earth-Science mission.

Dissanayake, Asoka↗

Integration, Test, and On-Orbit Operation of a Ka-band Parabolic Deployable Antenna (KaPDA) for CubeSats

In the past decade, CubeSats have undergone a revolution, moving from universityresearch projects to enabling industry opportunities and government missions. Six yearsago, the Jet Propulsion Laboratory, California Institute of Technology (JPL/Caltech)initiated a research and technology development effort to advance CubeSat communicationcapabilities, with one of the key thrusts being the Ka-band parabolic deployable antenna(KaPDA). This antenna started with the ambitious goal of fitting a 42 dB, 0.5 meter, 35 GHzantenna in a 1.5U canister. At that time, there had been very limited development in the areaof high gain CubeSat antennas which are critical for both high data rate communicationsand remote sensing science. A Ka-band high gain antenna would provide a 10,000 timesincrease in data communication rates over an X-band patch antenna and a 100 timesincrease over state-of-the-art S-band parabolic antennas. This paper discusses the process ofbuilding, integrating, and operating the flight antenna, its final performance and lessonslearned. KaPDA was an enabling technology for RainCube mission, the first Earth ScienceCubeSat to have an active instrument. RainCube was launched in May of 2018, makingKaPDA the second deployable parabolic antenna to fly on a CubeSat and the first of its kindto operate at Ka-band enabling a number of opportunities for high rate, deep space antennacommunications and remote sensing science.

Thomson, Mark W.↗

NASA-ISRO Synthetic Aperture Radar (NISAR) Mission

NISAR is a multi-disciplinary Earth-observing radar mission that makes global measurements of land surface changes that will greatly improve Earth system models. NISAR data will clarify spatially and temporally complex phenomena, including ecosystem disturbances, ice sheet collapse, and natural hazards including earthquakes, tsunamis, volcanoes, and landslides. It provides societally relevant data that will enable better protection of life and property. The mission, a NASA-ISRO partnership, uses two fully polarimetric SARs, one at L-band (L-SAR) and one at S-band (S-SAR), in exact repeating orbits every 12 days that allows interferometric combination of data on repeated passes. NASA provides the L SAR; a shared deployable reflector; an engineering payload that supports mission-specific data handling, navigation and communication functions; science observation planning and L SAR data processing. ISRO provides the S-SAR, spacecraft, launch vehicle, satellite operations, and S-SAR data processing. The mission will be launched from the Satish Dhawan Space Centre, Sriharikota, India. Mission development has addressed many unique challenges and incorporates many “firsts” for a jointly-developed free-flyer radar science mission.

Sarma, C V H S↗

Drop Size Distribution Measurements in Outer Rainbands of Hurricane Dorian at the NASA Wallops Precipitation-Research Facility

Hurricane rainbands are very efficient rain producers, but details on drop size distributions are still lacking. This study focuses on the rainbands of hurricane Dorian as they traversed the densely instrumented NASA precipitation-research facility at Wallops Island, VA, over a period of 8 h. Drop size distribution (DSD) was measured using a high-resolution meteorological particle spectrometer (MPS) and 2D video disdrometer, both located inside a double-fence wind shield. The shape of the DSD was examined using double-moment normalization, and compared with similar shapes from semiarid and subtropical sites. Dorian rainbands had a superexponential shape at small normalized diameter values similar to those of the other sites. NASA’s S-band polarimetric radar performed range height-indicator (RHI) scans over the disdrometer site, showing some remarkable signatures in the melting layer (bright-band reflectivity peaks of 55 dBZ, a dip in the copolar correlation to 0.85 indicative of 12–15 mm wet snow, and a staggering reflectivity gradient above the 0 °C level of −10 dB/km, indicative of heavy aggregation). In the rain layer at heights < 2.5 km, polarimetric signatures indicated drop break-up as the dominant process, but drops as large as 5 mm were detected during the intense bright-band period.

Merhala Thurai↗

NISAR flight feed passive antenna measurements

NISAR (NASA ISRO SAR, National Aeronautics and Space Administration, Indian Space Research Organization, Synthetic Aperture Radar) is an Earth science project currently in its final development phase at NASA Jet Propulsion Laboratory (JPL) and at ISRO. Due for launch in 2022 it will assess how our planet changes over time by measuring differences in the Earth’s solid surface due to factors like climate change, movement and melting of glaciers, earthquakes, land-slides, deforestation, agriculture and others. The enabling instrument for this mission is a dual band radar (L-band and S-band) that feeds a 12m deployable mesh reflector. This paper describes the measurement campaign of the L-band flight feed in its passive configuration. Further measurements will be done using the antenna with the active radar components but they are not part of this paper.

Harrell, Jefferson A.↗

Predicting Soil Moisture Retrieval Performance for the NISAR Mission

The National Aeronautics and Space Administration (NASA) - Indian Space Research Organization (ISRO) Synthetic Aperture Radar (NISAR) is being developed in order to provide highly spatial resolution L- and S-band backscatter observations of the Earth’s surface. Remotely sensed soil moisture is one of NISAR applications of interest. This paper reports an initial analysis of the possibility of using NISAR modes to retrieve soil moisture based on two different methods: a snapshot method and the time series technique. Preliminary results of the forward modeling of the backscattered signal over land and the soil moisture retrievals are presented for bare surfaces.

Alexandra Bringer↗

Lunar Node 1 and Beyond

Lunar Node 1 (LN-1) is an S-band Navigation beacon for lunar applications that was recently designed and built at MSFC. As part of NASA's Commercial Lunar Payload Services initiative, this beacon will be delivered to the moon's surface on Intuitive Machine's NOVA-C lunar lander in November 2021. During this mission, LN-1’s goal will be to demonstrate navigation technologies that can support local surface and orbital operations around the moon, enabling autonomy which would decrease dependency on heavily utilized Earth based assets like the Deep Space Network. To do this, LN-1’s design leverages Cubesat components as well as the Multi-spacecraft Autonomous Positioning System (MAPS) algorithms, which enable the autonomous spacecraft positioning through communication-integrated navigation measurements. In addition to demonstrating the MAPS payload, the radio will also be used in standard tone-based non-coherent ranging and Doppler tracking to provide an alternate approaches and comparisons for navigation performance. LN-1 will represent a single node in a potential greater MAPS network of assets. While LN-1 awaits launch to demonstrate this initial use of one-way navigation, designs are already under way for proposed subsequent missions like LN-2 to enable expanded capability. The next steps in these missions seek to include a receive capability to allow two-way ranging support with other operational spacecraft in the lunar vicinity, and to provide some component upgrades related to the radio, power, and thermal systems that will improve the longevity of the payload in the harsh lunar environment. The LN-1 design details, status, and potential forward work with mission like LN-2 will be outlined in this presentation.

Evan John Anzalone↗

Development of Spaceborne SoOp Reflectometry Model for Complex Terrains

Following the launch of multiple global navigation satel-lite system (GNSS) reflectometry (GNSS-R) missions, theSignals of Opportunity (SoOp) method has proven to be apowerful tool for geophysical parameter retrieval for land ap-plications such as soil moisture. Having demonstrated thefeasibility of the SoOp techniques at P- and S-band, the devel-opment of SoOp measurements beyond the GNSS frequencyregime is highly anticipated. The SoOp Coherent Bistatic(SCoBi) model and simulator, developed in 2017 and open-sourced in 2018, has been made available to provide multi-frequency, fully polarimetric SoOp simulations for ground-based applications through the joint use of analytical wavetheory and distorted Borne approximation to evaluate landcontributions from multilayer dielectric profiles composed ofsoil moisture, vegetation, and surface roughness effects. Thispaper describes the advancement of SCoBi from a ground-and airborne-based model to a spaceborne model. This ex-tension allows for fully polarimetric, complex delay-Dopplermap (DDM) simulations through evaluation of the coherentsuperposition of electric fields emerging from a grid of ori-ented facets. The model generates a grid of facets by de-termining the geometry of contributing elements from digitalelevation models, with each element providing its contribu-tion under a flat-earth assumption. This module will enablethe analysis of fully polarimetric scattering from frequenciesavailable across the ultra-high frequency (UHF) regime.

D R Boyd↗

Comparison of SAR and CYNSS surface water extent metrics over the Yucatan Lake wetland site

Wetlands have a major role in the carbon cycle, outgassing large quantities of carbon dioxide and methane through processes that are directly and strongly influenced by the duration and timing of inundation. Therefore, understanding the seasonal pattern of inundation can be a component for regional to global scale carbon models. Measurement of inundation extent also establishes a benchmark for the current status of wetland areas, useful in assessing the future impacts of climate change. The incorporation of frequent measurements of inundation extent into large-scale hydrological models would permit the evaluation of more detailed seasonal and longer-term floodplain dynamics and their associated management implications.The Cyclone GNSS (CYGNSS) constellation of satellites launched in 2016, and carries receivers capable of receiving data from L-band GNSS reflections. Delay Doppler maps (DDM) are generated on board and telemetered to the ground, along with a small number of raw data takes that can be used for special processing on the ground for evaluation purposes. It has been previously shown that these data can be sensitive to inundation.The NASA ISRO Synthetic Aperture Radar, currently planned for launch in January 2023, has both an L-band and S-band SAR for earth imaging. The L-band SAR, which will image the Earth's land mass twice every 12 days, has a requirement for measuring wetland inundation extent at the 1 ha scale. One of the sites that will be used to validate this requirement is Yucatan Lake, Louisiana. This oxbow lake and surrounding area located adjacent to the Mississippi river experiences periodic and extensive flooding in the surrounding forest areas.In 2019, NASA's UAVSAR fully polarimetric airborne L-band SAR conducted a flight campaign to image a dozen sites in the SE USA at approximately 12-day intervals and both in the morning and evening, to simulate the type of data NISAR will obtain. One site imaged during this campaign was the Yucatan Lake area, spanning water stages from low to high flood conditions.It has been demonstrated previously that GNSS reflectometry such as that measured by CYGNSS may be used to characterize surface inundation. It has also been known for decades that L-band SAR may be used to characterize not only the presence of open water, but also the presence of subcanopy inundation in forested areas. In this paper we will present results comparing data from these two types of instruments.

Lavalle, Marco↗

Science Status of the NASA-ISRO SAR Mission

The NASA-ISRO SAR (NISAR) Mission is entering its second phase of integration and test, preparing for a launch in January 2023. The mission will exploit synthetic aperture radar to map Earth’s surface every 12 days, persistently on ascending and descending portions of the orbit, over all land and ice-covered surfaces. The mission’s primary objectives will be to study Earth land and ice deformation, and ecosystems, in areas of common interest to the US and Indian science communities. This single observatory solution with an L-band (24 cm wavelength) and S-band (10 cm wavelength) radar has a swath of over 240 km at fine resolution, and will operate primarily in a dual-polarimetric mode in an exact repeat orbit. The science teams at NASA and ISRO are working jointly to finalize the joint science plan, calibration and validation plan, and science products, and operational procedures.

Kumar, Raj↗