Solving a large energy system optimization model using an open-source solver
Not Available
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Here, this paper presents a systematic thermal management analysis for a new lithium-titanate-oxide battery pack to be installed in a SuperTruck II, Class 8 hybrid truck. The authors investigate the feasibility of mounting the battery pack inside the vehicle and air-cooling it with fans supplying conditioned air from the cabin. Moreover, the cells within each module are to be immersed in a heat-transfer fluid to improve temperature homogeneity. A multi-stage thermal analysis is performed to ensure adequate thermal regulation of the battery under the proposed design, considering installation and operational constraints. The authors perform thermal and electrical characterization tests on a single cell. Results inform the development of computational fluid dynamics models of the cells, modules, and pack. Module-level analysis shows that the cell temperatures can be maintained below their upper operational limit of 55 °C with module wall-to-air heat transfer coefficients between 10 and 20 Wm -2 K -1 . Pack-level analysis of distinct configurations determines effective airflow paths for adequate heat transfer and delivers a final battery pack design that achieves sufficient cooling and temperature uniformity. A reduced-order electrothermal model is developed to rapidly predict the transient battery performance and to develop a temperature control strategy.
Here, this study develops the sparse chronology method to enhance the representative period framework in capacity expansion models, enabling the effective integration of long-duration energy storage modeling. Traditional representative period methods cannot capture the state of charge of seasonal energy storage systems because they do not establish effective inter-day linkages to connect the state of charge between periods. The sparse chronology approach addresses this limitation by establishing inter-day linkages that allow state of charge to shift inter-seasonally. At the same time, it groups identical representative days into partitions, applying constraints sparsely and implicitly to reduce computational load further. Validation results demonstrate that this method successfully simulates long-duration energy storage patterns, achieving close alignment with a continuous yearly benchmark model, with seasonal trends and state of charge cycles clearly represented. The computational load analysis reveals that the sparse chronology method efficiently applies constraints on maximum and minimum state of charge limits within the representative day framework, eliminating the need for detailed constraints on each individual day. By partitioning representative days and constraining only the start and end of each partition, the method significantly decreases computational requirements. Simulation results show that sparse chronology closely approximates the continuous yearly method's accuracy, even with as few as 20 representative days, achieving correlation values with the benchmark of nearly 0.9 in state of charge plots. Furthermore, it maintains computational efficiency, requiring only 4 % of the solver time compared to the continuous yearly method with 20 representative days. This approach allows capacity expansion models to incorporate long-duration energy storage with high temporal, spatial, and technological resolution, enabling more detailed modeling for large-scale power systems.
Presently available data on neutron irradiation damage raise doubts on the feasibility of using EUROFER97 steel for a water-cooled starter blanket in a DEMO reactor, since the ductile-to-brittle transition temperature (DBTT) increases significantly for irradiation temperatures below 350°C. The additional DBTT shift caused by H and He transmutation can only be estimated based on very few results with isotopically tailored EUROFER97 steel. Conservative calculations show that the DBTT of EUROFER97 steel could exceed the operating temperature in water-cooled starter blankets within a relatively short time period. This paper presents results from a EUROfusion funded irradiation campaign that was performed in the High Flux Isotope Reactor at Oak Ridge National Laboratory. The paper compares ten newly developed reduced activation ferritic-martensitic (RAFM) steels irradiated to a nominal dose of 2.5 dpa at 300°C. The post-irradiation experiments using Small Specimen Test Technology included hardness, tensile, and fracture mechanics tests combined with fractography and microstructure analysis are presented. Results show that micro-alloying EUROFER97-type steels influenced the mechanical properties but a dominating impact on irradiation damage resistance could not be identified. In contrast, specific thermo-mechanical treatments lead to better DBTT behavior. Discussion about irradiation response to heat treatment conditions is also given. Here, despite requiring data also at high dpa values, the results indicate that with these modified materials an increased lifetime and potentially also an increased operating temperature window can be achieved compared to EUROFER97.
Ten Eurofer97 steel variants, produced by non-standard fabrication-processing routes and modified alloying chemistries, were studied by neutron irradiations in the high flux isotope reactor. The irradiations were performed to ITER-TBM relevant conditions of ~255–350 °C, 2.94–3.24 dpa. We quantified the irradiation-induced degradation of the steels using mechanical property tests. All the steels suffered from irradiation hardening, where a significant increase in Vickers microhardness and yield stress (σ YS ) occurred, accompanied with severe loss of tensile elongation. The extent of hardening was material dependent. For T irr = 300±30 °C, most steels showed σ YS increase in the range of ~30% to as high as ~66%, except for a low temperature tempered steel with σYS increase below 15%. Despite large losses in elongation, most failures were ductile. Significant post-necking ductility was retained with reduction in area (RA) between 65–75%, but <50% for low temperature tempered steels. The ultimate tensile stress to yield stress (σ UTS /σ YS ) ratios decreased significantly after irradiation, highlighting irradiation-induced strain hardening capacity reduction. No major effect of irradiation on the plastic instability stress (σ PIS ) and true fracture stress of the steels was observed. By comparing the tensile stresses in true stress units and with literature, the results suggest that RAFM steel designing should target materials with a large separation between σ PIS and σ YS , to ensure the materials can maintain large work hardening and uniform deformation capability after irradiation. The tensile data of the steels additionally revealed a compelling evidence of an inverse trend between the change in RA and increase in σ YS of the neutron irradiated Eurofer97 type steels.
Real-time and adaptive plasma control is crucial for robust tokamak operation, requiring sensitivity and tolerance measurements of the plasma state. This paper presents the implementation of an integrated real-time plasma monitoring framework on the DIII-D tokamak to support advanced control approaches, including machine-learning (ML) methods. The system is built on the SHIELD framework, a high-performance modular architecture that provides a unified pipeline for integrating diverse diagnostics. The framework leverages high-bandwidth digitizers, fast numerical processing, and deterministic, low-latency interconnects to stream high-fidelity data from diagnostics such as electron cyclotron emission (ECE), beam emission spectroscopy (BES), CO interferometers, and a visible tangential divertor camera (TangTV). The system’s validity is demonstrated through direct comparisons of real-time and offline data. Furthermore, we present two key applications of the developed plasma monitoring system with ML-based plasma control strategies, including real-time divertor detachment and active Alfvén Eigenmode control. As a result, this work presents a robust and scalable approach for integrating high-frequency, multidimensional diagnostics into advanced control algorithms for future fusion devices.
Collaboration and team science are emerging areas of interest in software production. Historically, multi-institutional research collaborations are difficult to initiate and maintain, negatively impacting communication, negotiation, and dialogue between industry, government, and academic researchers. The Exascale Computing Project (ECP), a massive, multi-team, high-stakes initiative, facilitated broader research collaboration under a shared funding structure and extended timeline to support scientific discovery. Here, we conducted interviews with ECP teams, representing a variety of domain specialties, research institutions, and programming backgrounds. Using thematic analysis, we assessed how ECP’s structure created an environment of increased trust among projects and how software shared between teams facilitated sustained collaboration. We found that the expectation of future collaboration, i.e., the shadow of the future, greatly enhanced trust among teams and the quality of scientific software produced. Based on our findings within ECP projects, we connect to the existing literature on trust in software engineering and share recommendations for sustainable multi-institutional collaboration and shared best software practices.
The dissolution kinetics of five glasses along the NaAlSiO 4 -NaBSiO 4 join were used to evaluate how the structural variations associated with boron-aluminum substitution affect the rate of dissolution. The composition of each glass varied inversely in mol% of Al 2 O 3 (5 to 25 mol%) and B 2 O 3 (20 to 0 mol%) with Na 2 O (25 mol%) and SiO 2 (50 mol%) making up the remaining amount, in every case Na/(Al+B) = 1.0. Single-pass flow-through experiments (SPFT) were conducted under dilute conditions as a function of solution pH (from 7.0 to 12.0) and temperature (from 23° to 90°C). Analysis by 27 Al and 29 Si MAS-NMR suggests Al (~98% [4] Al) and Si atoms (~100% [4] Si) occupy a tetrahedral coordination whereas, B atoms occupy both tetrahedral ([4]B) and trigonal ( [3] B) coordination. The distribution of [3]B fractionated between [3] B(ring) and [3] B(non-ring) moieties, with the [3] B(ring)/ [3] B(non-ring) ratio increases with the B/Al ratio. The MAS-NMR results also indicated an increase in the fraction of [4] B with an increase in the B/Al ratio. But despite the changes in the B/Al ratio and B coordination, the 29 Si spectra maintain a chemical shift between -88 to -84 ppm for each glass. Unlike the 29 Si spectra, the 27 Al resonances shift to more positive values with an increase in the B/Al ratio which suggests mixing between the [4] Al and [3] B sites, assuming avoidance between tetrahedral trivalent cations ( [4] Al-O- [4] B avoidance). Raman spectroscopy was use to augment the results collected from MAS-NMR and demonstrated that NeB4 (glass sample with the highest B content) was glass-glass phase separated (e.g., heterogeneous glass). Results from SPFT experiments suggest a forward rate of reaction and pH power law coefficients,η, that are independent of B/Al under these neutral to alkaline test conditions for all homogeneous glasses. The temperature dependence shows an order of magnitude increase in the dissolution rate with a 67°C increase in temperature and suggests dissolution is controlled by a surface-mediated reaction, evident by the activation energy, E a , being between 44±8 and 48±7 kJ/mol. Forward dissolution rates, based on Na and Si release, for homogeneous glasses are independent of the B/Al ratio, whereas dissolution rates based on Al and B release are not. Dissolution rates based on B release increase with an increase in the fraction of [3] B(ring). Finally in accord with previous studies, the data discussed in this manuscript suggest rupture of the Al-O and Si-O bond as the rate-limiting step controlling the dissolution of these glasses.
Not Available
Throughout the Proterozoic Era, sedimentary organic carbon burial helped set the pace of global oxygenation and acted as a major modulator of atmospheric CO 2 and climate. Although Proterozoic rocks generally contain low concentrations of organic matter (OM), there are key exceptions to this rule, including the relatively OM-rich Arctic Bay shales from Baffin Island, Canada (Bylot Supergroup, Borden Basin, ~1.05 Ga). The mechanisms driving elevated OM concentrations in these and other Proterozoic shales remain poorly understood. In the Mesozoic and Cenozoic, organic matter sulfurization can be a major driver of enhanced OM burial across a range of redox conditions comparable to those inferred for many Proterozoic environments. Therefore, in this study, we evaluate the role of sulfurization in driving OM preservation in the Mesoproterozoic Borden Basin and discuss its relevance to Proterozoic systems in general. We present the first evidence for syngenetic-to-early-diagenetic OM sulfurization in a Proterozoic basin, which begins to fill a several-billion-year gap in our record of organic S across Earth history. We find that OM sulfurization was particularly extensive in shales from a relatively shallow-water section (Alpha River) but less extensive in shales deposited in deeper water (Shale Valley), which is consistent with models that infer sulfidic ‘wedges’ or O 2 -minimum-zone-type structures on shelf margins at least intermittently at this time. At the shallower site, organic S and pyrite are similarly 34 S-depleted and thus likely formed at roughly the same time near the sediment–water interface under conditions previously interpreted to have been ferruginous to intermittently sulfidic. In contrast, at the deeper-water site, large S-isotope differences between pyrite and organic S along with low apparent OM sulfurization intensities indicate that pyrite formation was favored over OM sulfurization during early sedimentation under variable but primarily ferruginous conditions. Although Mesoproterozoic biomass can be substantially sulfurized, indicators of sulfurization intensity are not correlated with OM concentrations, and therefore sulfurization does not appear to have been the primary driver of enhanced OM concentrations in Arctic Bay Formation shales. The link between sulfurization and total OM preservation may have been modulated during the deposition of Arctic Bay Formation shales by differences in iron availability, nutrient cycling, and particle dynamics in the Mesoproterozoic.
Dryland ecosystems can be constrained by low soil fertility. Within drylands, the soil nutrient and organic carbon (C) cycling that does occur is often mediated by soil surface communities known as biological soil crusts (biocrusts), which cycle C and nutrients in the top ca. 0–2 cm of soil. However, the degree to which biocrusts are influencing soil fertility and biogeochemical cycling in deeper, subsurface mineral soils is unclear. The movement of dissolved resources from biocrusts to deeper soil layers in leachate may be one of the main mechanisms through which biocrust fertility is transferred downward towards deeper microbial communities and plant roots occurring within mineral soil. Here, in this study, we examined the role of biocrust leachate in contributing to subsurface nutrient and soluble C pools and subsurface microbial cycling. We collected biocrusts from three biocrust successional stages and explored resource pools in situ at multiple soil depths, while collecting leachate and measuring nutrient and organic C concentrations and metabolite composition from each successional stage in the laboratory. After four leachate collections, we conducted an incubation of mineral soil collected from below each biocrust successional stage to measure heterotrophic microbial CO 2 flux and biomass. Overall, our findings observed that the degree of nutrient and C connectivity between biocrusts and the sub-crust mineral soil depended on the biocrust successional stage and the element being considered, and the influence of biocrust successional stage on mineral soil CO 2 flux is likely related to long-term resource build up. Together, our results suggest that the influence of biocrust leachate on subsurface mineral soil is complex and context dependent, but, over longer time periods and at later successional stages, can have measurable effects on dryland soil biogeochemical cycling with feedbacks to resource availability and CO 2 flux.
Biocrusts influence soil biogeochemistry by fixing carbon (C) and nitrogen (N) and through leachate inputs to soils. Functional rates can vary among biocrust community states and in response to edaphic properties, heterotrophic microbial activity, and global change. Using soils and biocrusts from the Colorado Plateau, Utah, USA, we aimed to quantify the influence of early-successional (ES) and late-successional (LS) biocrust community states on soil biogeochemistry. In a field setting, we found soil was less “fertile” under ES than LS biocrust, but ES biocrust had a relative influence 1.3 times greater than LS biocrust on soil fertility. Leachate collected from LS biocrust had, on average, 6 times more organic C and 1.7 times more dissolved N than ES biocrust, but concentrations of phosphorus (P) and inorganic N did not differ among the two biocrust types. Here, to disentangle influences of biocrusts and soil properties on biogeochemical pools, we constructed mesocosms from homogenized soil and left the surface bare or covered with ES or LS biocrust, before assignment to ambient or warmed (+5 °C) temperature treatments for 3 months. Multivariate biogeochemical properties differed among cover types, yet all exhibited losses of P, N, and organic C and nearly half of the biogeochemical variables considered did not differ among cover types. Mesocosms with LS biocrust retained more dissolved N, supported 8 additional, significant correlations among biogeochemical pools of the biocrust and mineral soil layer on average, and lost fewer of these correlations under warming. Overall, while soils under LS biocrusts were more fertile (i.e., had higher nutrient concentrations) than under ES, we did not find evidence implicating leachate as the primary driver of this difference. Biocrust influences on soil fertility were greater when mineral soil nutrients were in lower concentrations, highlighting the value of even incipient biocrusts for dryland functioning.
Lactate levels in humans reveal intensity and duration of exertion and provide a critical readout for the severity of life-threatening illnesses such as pediatric sepsis. Using the lactate oxidase enzyme (Lox) from Aerococcus viridians, we demonstrated its functionality for lactate electrochemical sensing in physiological fluids in a lab setting. The structure and dynamics of LOx were validated by crystallography, X-ray scattering, and hydroxyl radical protein footprinting. This provided a validated protein template for understanding and designing an enzyme-based electrochemical sensing elements. Using this template, LOx enzyme variants were generated and compared. Comparison of the variants demonstrates that one exhibits effective lactate sensing at significantly reduced operating voltages. Additionally, we demonstrate that the four hexahistidine-tags on each enzyme tetramer are sufficient for immobilization to create a durable, functional sensor, with no need for a covalent attachment, enabling self-immobilization and eliminating the need for additional immobilization steps. The functionality of the LOx enzyme variants was verified at physiological lactate concentrations in both human serum (0–4 mM) and artificial sweat (0–100 mM) using 3-electrode setups for analysis of the three variants in parallel. Accuracy of measurement in both artificial sweat and human serum were high. Employing a microfluidic flow cell, we successfully monitored varying lactate levels in physiological fluids continuously over a 2h period. Overall, this optimized LOx enzyme, which self-immobilizes onto gold sensing electrodes, facilitates efficient and reliable lactate detection and continuous monitoring at reduced operating voltages suitable for further development towards commercial use.
Four microbial cultures were evaluated for organic acid production and their potential utility for leaching of rare earth elements (REE) from retorted phosphor powder (RPP) and spent fluidized cracking catalyst (FCC). Three of the cultures (2 bacterial, 1 fungal) were isolated from environmental and industrial materials known to contain rare earth elements. The other was the well-known and industrially important bacterium Gluconobacter oxydans. Gluconic acid was the predominant identified organic acid produced by all of the cultures; citric and acetic acid were among the other acids detected. There was also maximum REE leaching by cell free culture supernatants obtained with Gluconobacter and the FCC; 49% of total REE was recovered, with preferential recovery of lanthanum over cerium. The phosphor powder was more difficult to leach; only ~2 % total REE was leached from RPP with Gluconobacter. Tests with the RPP indicated that the extent of REE solubilization was similar whether whole cell cultures or cell-free supernatants were used. However, Gluconobacter cell-free culture supernatants with 10-15 mM gluconic acid outperformed abiotically prepared leaching solutions with 30 mM gluconic acid concentrations. Abiotic tests showed that increasing gluconic acid concentrations increased leaching efficiency; for example, total REE leaching from FCC increased from 24 to 36 to 45% when gluconic acid was increased from 10 to 30 to 90 mM. Our research shows that utilizing microorganisms that produce gluconic acid can result in effective leaching of REE from waste materials, and optimizing gluconic acid production will improve recovery.
Explore the source record for details and available documents.
A lack of consistent widespread information on potential environmental effects, monitoring outcomes, and mitigation strategies continues to hinder the development and deployment of marine energy systems around the world. To address this need, member nations of the Ocean Energy Systems (OES) formed Annex IV, a three-year collaborative effort (2010-2013) to increase knowledge sharing, research collaborations, and efficient regulatory decision-making associated with investigating and evaluating the potential impacts of wave and tidal energy. In parallel, the US Department of Energy began development of a publically-available, searchable online database of environmental information (called Tethys), housing scientific literature pertaining to the environmental effects of marine energy and offshore wind systems, as well as metadata on international ocean energy projects and research studies collected under Annex IV. In addition to providing broad access to information on environmental effects of marine energy and offshore wind developments, Tethys can act as a commons for bringing together researchers, device and project developers, regulators, and stakeholders, to explore shared interests and information needs for the emerging marine energy industry. This paper will demonstrate the development, existing functionality, and content of Tethys, as well as discuss the future of Annex IV including information updates, improvements, and additional outreach efforts over the next several years.
Purpose: To correlate the treatment planning parameters with the clinical outcomes in patients treated with accelerated partial breast intensity-modulated radiotherapy. Methods and Materials: A total of 105 patients with Stage I breast cancer were treated between February 2004 and March 2007 in a Phase II prospective trial and had detailed information available on the planning target volume (PTV), ipsilateral breast volume (IBV), PTV/IBV ratio, lung volume, chest wall volume, surgery to radiotherapy interval, follow-up interval, breast pain, and cosmesis. The first 7 of these patients were treated to 34 Gy, and the remaining 98 were treated to 38.5 Gy. All patients were treated twice daily for 5 consecutive days. Univariate and multivariate analyses were performed. Results: The median follow-up was 13 months. No recurrences or deaths were observed. Of the 105 patients, 30 reported mild or moderate breast pain in their most recently recorded follow-up visit. The irradiated lung volume (p < 0.05) and chest wall volume receiving >35 Gy (p < 0.01) were associated with pain. The PTV, but not the PTV/IBV ratio, also correlated with pain (p < 0.01 and p = 0.42, respectively). A total of 72 patients reported excellent, 32 reported good, and 1 reported poor cosmesis. Physician-rated cosmesis reported 90 excellent and 15 good. None of the tested variables correlated with the cosmetic outcomes. Conclusion: Radiotherapy to the chest wall (chest wall volume receiving >35 Gy) and to lung correlated with reports of mild pain after accelerated partial breast intensity-modulated radiotherapy. Also, the PTV, but not the PTV/IBV ratio, was predictive of post-treatment reports of pain.
Purpose: To compare interobserver variations in delineating the whole breast for treatment planning using two contouring methods. Methods and Materials: Autosegmented contours were generated by a deformable image registration-based breast segmentation method (DEF-SEG) by mapping the whole breast clinical target volume (CTVwb) from a template case to a new patient case. Eight breast radiation oncologists modified the autosegmented contours as necessary to achieve a clinically appropriate CTVwb and then recontoured the same case from scratch for comparison. The times to complete each approach, as well as the interobserver variations, were analyzed. The template case was also mapped to 10 breast cancer patients with a body mass index of 19.1-35.9 kg/m{sup 2}. The three-dimensional surface-to-surface distances and volume overlapping analyses were computed to quantify contour variations. Results: The median time to edit the DEF-SEG-generated CTVwb was 12.9 min (range, 3.4-35.9) compared with 18.6 min (range, 8.9-45.2) to contour the CTVwb from scratch (30% faster, p = 0.028). The mean surface-to-surface distance was noticeably reduced from 1.6 mm among the contours generated from scratch to 1.0 mm using the DEF-SEG method (p = 0.047). The deformed contours in 10 patients achieved 94% volume overlap before correction and required editing of 5% (range, 1-10%) of the contoured volume. Conclusion: Significant interobserver variations suggested a lack of consensus regarding the CTVwb, even among breast cancer specialists. Using the DEF-SEG method produced more consistent results and required less time. The DEF-SEG method can be successfully applied to patients with different body mass indexes.