Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ray tracing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Anticipating Optical Availability in Hybrid RF/FSO Links Using RF Beacons and Deep Learning

Radiofrequency (RF) communications offer reliable but low data rates and energy-inefficient satellite links, while free-space optical (FSO) promises high bandwidth but struggles with disturbances imposed by atmospheric effects. A hybrid RF/FSO architecture aims to achieve optimal reliability along with high data rates for space communications. Accurate prediction of dynamic ground-to-satellite FSO link availability is critical for routing decisions in low-earth orbit constellations. In this paper, we propose a system leveraging ubiquitous RF links to proactively forecast FSO link degradation prior to signal drops below threshold levels. This enables pre-calculation of rerouting to maximally maintain high data rate FSO links throughout the duration of weather effects. We implement a supervised learning model to anticipate FSO attenuation based on the analysis of RF patterns. Through the simulation of a dense lower earth orbit (LEO) satellite constellation, we demonstrate the efficacy of our approach in a simulated satellite network, highlighting the balance between predictive accuracy and prediction duration. An emulated cloud attenuation model is proposed to provide insight into the temporal profiles of RF signals and their correlation to FSO channel dynamics. Our investigation sheds light on the trade-offs between prediction horizon and accuracy arising from RF beacon numbers and proximity.

FSO availability↗
DOE OSTI2026

Materializing Inter-Channel Relationships With Multi-Density Woodcock Tracking

Volume rendering techniques for scientific visualization have recently shifted toward Monte Carlo (MC) methods for their flexibility and robustness, but their use in multi-channel visualization remains underexplored. Traditional multi-channel volume rendering often relies on arbitrary, non-physically based color blending functions that hinder interpretation. Here, we introduce multi-density Woodcock tracking, a simple extension of Woodcock tracking that leverages an MC method to produce high-fidelity, physically grounded multi-channel renderings without arbitrary blending. By generalizing Woodcock’s distance tracking, we provide a unified blending modality that also integrates blending functions from prior works. We further implement effects that enhance boundary and feature recognition. By accumulating frames in real-time, our approach delivers high-quality visualizations with perceptual benefits, demonstrated on diverse datasets.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Developing inductively driven diagnostic X-ray sources to enable transformative radiography and diffraction capabilities on Z

Penetrating X-rays are one of the most effective tools for diagnosing high energy density experiments, whether through radiographic imaging or X-ray diffraction. To expand the X-ray diagnostic capabilities at the 26-MA Z Pulsed Power Facility, we have developed a new diagnostic X-ray source called the inductively driven X-pinch (IDXP). This X-ray source is powered by a miniature transmission line that is inductively coupled to fringe magnetic fields in the final power feed. The transmission line redirects a small amount of Zs magnetic energy into a secondary cavity where 150+ kA of current is delivered to a hybrid X-pinch. In this report, we describe the multi-stage development of the IDXP concept through experiments both on Z and in a surrogate setup on the 1 MA Mykonos facility. Initial short-circuit experiments to verify power ow on Z are followed by short-circuit and X-ray source development experiments on Mykonos. The creation of a radiography-quality X-pinch hot spot is verified through a combination of X-ray diode traces, laser shadowgraphy, and source radiography. The success of the IDXP experiments on Mykonos has resulted in the design and fabrication of an IDXP for an upcoming Z experiment that will be the first-ever X-pinch fielded on Z. We have also pursued the development of two additional technologies. First, the extended convolute post (XCP) has been developed as an alternate method for powering diagnostic X-pinches on Z. This concept, which directly couples the current owing in one of the twelve Z convolute posts to an X-pinch, greatly increases the amount of available current relative to an IDXP (900 kA versus 150 kA). Initial short-circuit XCP experiments have demonstrated the efficacy of power ow in this geometry. The second technology pursued here is the inductively driven transmission line (IDTL) current monitor. These low-current IDTLs seek to measure the current in the final power feed with high fidelity. After three generations of development, IDTL current monitors frequently return cleaner current measurements than the standard B-dot sensors that are fielded on Z. This is especially true on high-inductance experiments where the harshest conditions are created in the nal power feed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Adaptive Angular Quadrature Scheme for a backwards-in-time Method of Characteristics Solution to the Radiative Transfer Equation [Slides]

Radiative transfer/radiation transport are important problems to solve in astrophysics and high energy density physics. Various methods exist to solve radiation transport, such as Monte Carlo (MC), Discrete Ordinates (S N ), Method of Characteristics (MOC), and the spherical harmonics (P N ) method. Method of Characteristics requires “launching” of rays in discrete directions. Unresolved details of angular mesh create ray effects and can miss sources in the domain. Ray effects can lead to unphysical “stepping” in solution and incorrect energy deposition. Adaptive quadrature schemes can be used to detect and mitigate these effects. The Method of Characteristics (MOC) is a common method for solving hyperbolic PDEs in radiation transport and supersonic flow problems. Generally in MOC for radiation transport, virtual particles are tracked from birth to the end of a timestep. This requires interpolation to go from final location to cell averaged or corner values of angular intensity. Backwards-in-Time (BIT) particle tracking avoids this by prescribing the final position of the virtual particle at the cell nodes/corners. Angular intensities are computed at time k + 1 by launching ray back to previous timestep(s), or t = 0. Scheme allows solution to be computed as the characteristic ray is traced backwards in time.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1971

The X-ray corona and the photospheric magnetic field.

Soft X-ray photographs of the solar corona have been obtained on four flights of a rocket-borne grazing incidence telescope having a resolution of a few arc sec. The configuration of the X-ray emitting structures in the corona has been compared to the magnetic field distribution measured by photospheric longitudinal magnetograms. The X-ray structures trace the three-dimensional configuration of the magnetic field through the lower corona. Active regions in the corona take the form of tubular structures connecting regions of opposite magnetic polarity within the same or adjacent chromospheric active regions. Higher, larger structures link widely separated active regions into complexes of activity covering substantial fractions of the disk. The complexes are separated by areas of low average field in the photosphere. Interconnections across the solar equator appear to originate over areas of preceding polarity.

Krieger, A. S.↗
NASA NTRS1976

Lidar measurement of stratospheric dust from St. Augustine Volcano

The detection of a stratospheric dust layer of probable volcanic origin over Hampton, Va., on the evening of Jan. 28, 1976, with a 20-inch lidar system is reported. A digitized cathode-ray-tube trace of a return signal from altitudes of 12 to 24 km on January 28 is provided, and it is shown that 38% of the return was due to stratospheric aerosol. Noting that measurements on January 22 and February 2 showed no traces of this stratospheric dust layer, trajectories of dust-laden air parcels are followed from initiation at 0000 GMT on January 24 at the St. Augustine Volcano on Augustine Island, Alaska (59 deg N, 153 deg W). Analysis of the trajectories indicates that dust injected into the stratosphere at 59 deg N, 153 deg W could have been transported to Virginia in about 4 days. It is concluded that if the St. Augustine Volcano was the source of the dust, at least 23 deg of meridional transport from polar latitudes was observed.

Remsberg, E. E.↗
NASA NTRS1978

A computer program to calculate radiation properties of reflector antennas

A computer program to calculate the radiation properties of the reflector antennas is presented. It can be used for paraboloidal, spherical, or ellipsoidal reflector surfaces and is easily modified to handle any surface that can be expressed analytically. The program is general enough to allow any arbitrary location and pointing angle for the feed antenna. The effect of blockage due to the feed horn is also included in the computations. The computer program is based upon the technique of tracing the rays from the feed antenna to the reflector to an aperture plane. The far field radiation properties are then calculated by performing a double integration over the field points in the aperture plane. To facilitate the computation of double intergral, the field points are first aligned along the equispaced straight lines in the aperture plane. The computation time is relatively insensitive to the absolute size of the aperture and even though no limits on the largest reflector size have been determined, the program was used for reflector diameters of 1000 wavelenghts.

Agrawal, P. K.↗
NASA NTRS1982

Stereo electro-optical tracker study for the measurement of model deformations at the National Transonic Facility

The effects of model vibration, camera and window nonlinearities, and aerodynamic disturbances in the optical path on the measurement of target position is examined. Window distortion, temperature and pressure changes, laminar and turbulent boundary layers, shock waves, target intensity and, target vibration are also studied. A general computer program was developed to trace optical rays through these disturbances. The use of a charge injection device camera as an alternative to the image dissector camera was examined.

Hertel, R. J.↗
NASA NTRS1985

Experiment Pamir-4: Analysis of superfamily with halo of electromagnetic nature detected in deep XEC

The family Pb2-11 was detected in the multilayer lead XEC with total thickness of 100 c.u. exposed at the Pamirs. Each lead layer was 1 cm thick, the first registering layer being located under 2 cm of Pb(= 4 c.u.). The family comprised a narrow group of gamma-rays which near the maximum of cascade development (= 14 c.u.) produced a dark spot of optical density D approx. .4 over area S = 25 sq.mm. The narrow group of gamma-rays was traced up to 14th layer corresponding to 30 c.u. Deeper in the chamber, for the space of 70 c.u. no hadron cascade was observed. Thus, the pure electromagnetic halo could be assumed. Preliminary results of the analysis of the family Pb2-11 was presented. The methods of estimation of energy of primary particle and height of nuclear interaction responsible for the observed halo are considered in more detail.

Zatsepin, G. T.↗
NASA NTRS1992

X-ray observations of sunspot penumbral structure

High-resolution coronal observations with the Normal Incidence X-ray Telescope (NIXT) reveal previously unobserved structure in the magnetic fields above a sunspot. The X-ray images are precisely aligned with a continuum photospheric image taken at the same time. The X-ray brightness traces magnetic field lines and shows: (1) that none of the bright loops originate in the spot umbra and (2) that some field lines emerging from the inner penumbra connect to regions far away from the spot. Such large-scale structures must remain distinct from the shallowly inclined fields in the outer penumbra. In particular, they cannot be involved in any interchange between the bright and dark filaments. This imposes constraints on models of penumbral convection.

Sams, B. J., III↗
NASA NTRS1996

Compact Solar Simulator with a Small Subtense Angle and Controlled Magnification Optics

The present invention is directed to a method of simulating a pseudosun using a solar simulator. In the present invention the collector and lens of a lamp are designed to properly focus a plurality of light beams onto a segmented turning mirror. The path of light rays are traced from the lamp to the collector and then finally to the lens to control the solid and tangential magnification of the solar simulator. The segmented turning mirror is located at the focal point of the light beam and redirects the light into a vacuum chamber.

Jefferies, Kent S.↗
NASA NTRS2004

Enabling Telescopes of the Future: Long-Range Technology Investing

The Office of Space Science at NASA Headquarters has a current staff of about 60 professionals (aka, scientists, engineers, budget analysts) and an annual budget of $2.5 B out of NASA s $15.0 B. About 35 missions or programs in various stages of development or operation are managed by OSS, notable among them are Hubble Space Telescope, Mars Global Surveyor, Mars 2001 Odyssey, Chandra X-ray Observatory, TRACE (solar observatory), Cassini (mission to Saturn), Galileo (mission at Jupiter), and Next Generation Space Telescope. OSS has an annual technology budget of several hundred million dollars. So, what is it that we are doing?

Thronson, Harley↗