Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RADIAL DISTRIBUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Measurement of mass, momentum and energy distributions in a quasi-steady MPD discharge.

Piezoelectric impact pressure measurements in the exhaust flow of a quasi-steady MPD accelerator are used to compute the profile of momentum flux 25.4 cm downstream of a 2.8 MW discharge. The integral of this profile is in good agreement with the sum of calculated electromagnetic and measured electrothermal thrust components. Velocity vector profiles obtained by a time-of-flight technique reveal a radial variation of velocity ranging from 31,000 m/sec on the centerline to 11,000 m/sec at a radius of 20 cm. When combined with the momentum flux profiles, these velocities yield information on the distribution of mass and energy in the plasma exhaust.

Clark, K. E.↗

Interplanetary Fast Shocks and Associated Drivers Observed through the Twenty-Third Solar Minimum by WIND Over its First 2.5 Years

A list of the interplanetary (IP) shocks observed by WIND from its launch (in November 1994) to May 1997 is presented. Forty two shocks were identified. The magnetohydrodynamic nature of the shocks is investigated, and the associated shock parameters and their uncertainties are accurately computed using a practical scheme which combines two techniques. These techniques are a combination of the "pre-averaged" magnetic-coplanarity, velocity-coplanarity, and the Abraham-Schrauner-mixed methods, on the one hand, and the Vinas and Scudder [1986] technique for solving the non-linear least-squares Rankine-Hugoniot shock equations, on the other. Within acceptable limits these two techniques generally gave the same results, with some exceptions. The reasons for the exceptions are discussed. It is found that the mean strength and rate of occurrence of the shocks appears to correlated with the solar cycle. Both showed a decrease in 1996 coincident with the time of the lowest ultraviolet solar radiance, indicative of solar minimum and start of solar cycle 23, which began around June 1996. Eighteen shocks appeared to be associated with corotating interaction regions (CIRs). The distribution of their shock normals showed a mean direction peaking in the ecliptic plane and with a longitude (phi(sub n)) in that plane between perpendicular to the Parker spiral and radial from the Sun. When grouped according to the sense of the direction of propagation of the shocks the mean azimuthal (longitude) angle in GSE coordinates was approximately 194 deg for the fast-forward and approximately 20 deg for the fast-reverse shocks. Another 16 shocks were determined to be driven by solar transients, including magnetic clouds. These shocks had a broader distribution of normal directions than those of the CIR cases with a mean direction close to the Sun-Earth line. Eight shocks of unknown origin had normal orientation well off the ecliptic plane. No shock propagated with longitude phi(sub n) >= 220 +/- 10 deg, this would suggest strong hindrance to the propagation of shocks contra a rather tightly winding Parker spiral. Examination of the obliquity angle theta(sub Bn) (that between the shock normal and the upstream interplanetary magnetic field) for the full set of shocks revealed that about 58% was quasi-perpendicular, and some were very nearly perpendicular. About 32% of the shocks were oblique, and the rest (only 10%) were quasi-parallel, with one on Dec. 9, 1996 that showed field pulsations. Small uncertainty in the estimated angle theta(sub Bn) was obtained for about 10 shocks with magnetosonic Mach numbers between 1 and 2, hopefully significantly contributing to studies researching particle acceleration mechanisms at IP shocks, and to investigations where accurate values of theta(sub Bn) are crucial.

Mariani, F.↗

Dilution Jet Mixing Program, phase 1

The effect of jet to mainstream density ratio, flow area convergence as encounted in transition sections, and nonuniform mainstream profile upstream of dilution orifices on the mixing of a row of jets with a confined cross flow was quantified. It is found that: (1) jet spreading rate in transverse direction is increased with increasing J, H/D and with decreasing S/D; (2) the density ratio has only a second order effect on the jet mixing characteristics for a constant momentum ratio; (3) the temperature distributions in the jet mixing region are strongly influenced by the undisturbed mainstream profile; (4) flow area convergence enhances mixing in radial and transverse directions. An asymmetric convergent duct with flat wall injection has the same jet mixing characteristics as a symmetric convergent duct. An asymmetric convergent duct with slant wall injection has a faster jet spreading rate in the transverse direction.

Srinivasan, R.↗

Investigation of the three-dimensional flow field within a transonic fan rotor: Experiment and analysis

An experimental investigation of the three dimensional flow field through a low aspect ratio, transonic, axial flow fan rotor has been conducted using an advanced laser anemometer (LA) system. Laser velocimeter measurements of the rotor flow field at the design operating speed and over a range of through flow conditions are compared to analytical solutions. The numerical technique used herein yields the solution to the full, three dimensional, unsteady Euler equations using an explicit time marching, finite volume approach. The numerical analysis, when coupled with a simplified boundary layer calculation, generally yields good agreement with the experimental data. The test rotor has an aspect ratio of 1.56, a design total pressure ratio of 1.629 and a tip relative Mach number of 1.38. The high spatial resolution of the LA data matrix (9 radial by 30 axial by 50 blade to blade) permits details of the transonic flow field such as shock location, turning distribution and blade loading levels to be investigated and compared to analytical results.

Pierzga, M. J.↗

Saturn's rings - Voyager 1 radio occultation experiment results

The Voyager 1 encounter with Saturn in 1980 included the first radio occultation measurements of the ring system. Opacity of and scattering by Saturn's rings were measured at 3.6- and 13-cm wavelengths using transmissions from the spacecraft to the earth. Detailed models of ring structure have been derived from these data at radial resolutions as small as 1 km, depending on the radio opacity of the region probed. Inverse power-law-type distributions of ring particle sizes with indices of about 3 and upper size cutoffs near 5 m are in good agreement with the data, but parameters vary throughout the rings. Occultation measurements have also provided information on ring dynamics and have led to a more precise definition of Saturn's pole vector.

Simpson, R. A.↗

The disks of T Tauri stars with flat infrared spectra

The energy distributions of T Tauri stars with flat infrared spectra is modeled by assuming that they have spatially thin disks with unorthodox radial gradients of temperature. Derived model parameters show that the disks associated with the flat-spectrum sources must contain intrinsic luminosity in addition to the energy intercepted and reprocessed from the central star, i.e., the disks must be active. Self-gravity may provide a possible source for this activity.

Adams, Fred C.↗

The hydrogen density of the local interstellar medium and an upper limit to the galactic glow determined from Pioneer 10 ultraviolet photometer observations

Pioneer 10 Lyman-alpha data obtained beyond the heliocentric distance of 30 AU are used here to determine the local ISM hydrogen density and downwind Galactic glow. The resulting asymptotic interstellar hydrogen density obtained using a conventional interplanetary model is 0.06/cu cm, and the Galactic Lyman-alpha glow is found to be negligible in the downwind direction. Discrepancies are found between observations and the conventional theoretical predictions of the glow dependence on radial distance. Based solely on data obtained between 30 and 39 AU, a better fit is obtained with a constant density distribution beyond 30 AU. In this case, a density of 0.05/cu cm and Galactic glow of 1.5 R is obtained. These results suggest that a complex density distribution may be more appropriate than either the conventional exponential distribution or the constant distribution.

Wu, F. M.↗

Global Magnetohydrodynamic Modeling of the Solar Corona

Under this contract, we have continued our investigations of the large scale structure of the solar corona and inner heliosphere using global magnetohydrodynamic (MHD) simulations. These computations have also formed the basis for studies of coronal mass ejections (CMES) using realistic coronal configurations. We have developed a technique for computing realistic magnetohydrodynamic (MHD) computations of the solar corona and inner heliosphere. To perform computations that can be compared with specific observations, it is necessary to incorporate solar observations into the boundary conditions. We have used the Wilcox Solar Observatory synoptic maps (collected during a solar rotation by daily measurements of the line-of-sight magnetic field at central meridian) to specify the radial magnetic field (B,) at the photosphere. For the initial condition, we use a potential magnetic field consistent with the specified distribution of B, at the lower boundary, and a wind solution consistent with the specified plasma density and temperature at the solar surface. Together this initial condition forms a (non-equilibrium) approximation of the state of the solar corona for the time-dependent MHD computation. The MHD equations are then integrated in time to steady state. Here we describe solutions relevant to a recent solar eclipse, as well as Ulysses observations. We have also developed a model configuration of solar minimum, useful for studying CME initiation and propagation.

Linker, Jon A.↗

Highly blueshifted H I gas toward the Galactic center

Gusten and Downes (1981) discovered the presence of -190 km/s absorbing H I gas toward the Galactic center. Using the VLA in its most compact hybrid configuration, we were able to image the distribution of this high-negative-velocity H I spectral feature with a spatial and spectral resolution of about 25 arcsec and 6.2 km/s, respectively. The blueshifted H I gas is dominated by systematic radial motion as great as -210 km/s and is localized to within several arcmin of the dynamical center of the Galaxy. We show a striking column of diffuse H I gas extending for several arcmin in the direction along the rotation axis of the molecular disk encircling the Galactic center. The H I optical depth distribution indicates that a total of about 3000 solar masses of neutral material, with -211 to -160 km/sec velocity, appears to be associated with this feature. This unusual kinematic feature appears to coexist with two systems of rotationally supported ionized (Sgr A West) and molecular (circumnuclear disk) gas.

Yusef-Zadeh, Farhad↗

Survey of electron and ion bulk flows in the distant magnetotail with the Geotail spacecraft

A histogramic survey is reported for the electron and ion bulk flows in Earth's magnetotail at geocentric radial distances in the range of about 10 to 210 R(sub E) from the Comprehensive Plasma Instrumentation on board the Geotail spacecraft. Specifically the X-components of the bulk flows are examined for high ion temperatures, greater than 5 x 10(exp 6) K, and for the lower ion temperatures. This separation of plasmas provides a reasonably effective criterion for identifying the hot plasmas associated with the plasma sheet and its boundary layers and the colder plasmas found in the magnetotail lobes and magnetopause boundary layer. The survey shows that the distributions of earthward bulk flows of ions and electrons are similar for each of the two temperature regimes, respectively. However, average speeds for the ions and electrons as a function of radial distance are dissimilar in that the electron bulk speeds are greater than those for the ions. All average electron and ion bulk flows are directed tailward at geocentric radial distances greater than 30 R(sub E). The most striking dissimilarity in the occurrence frequencies of the bulk flows is the large number with high tailward speeds for the electrons, greater than 500 km/s, relative to those for the ions. It is found that the disparity in bulk flows is due to the presence of two ion velocity distributions, one with high temperatures and a bulk speed similar to that of the electrons and the second, colder distribution with higher number density and considerably lesser bulk flow speed.

Frank, L. A.↗

Lunar Floor-Fractured Craters: Classification, Distribution and Implications for Magmatism and Shallow Crustal Structure

Floor-fractured craters (FFCs) are a class of lunar craters defined by their distinctly shallow, often plate-like floors, and combinations of radial, con-centric, and polygonal floor-fractures; a variety of other interior features are often observed, such as moats, ridges, small dark-haloed pits, and patches of mare material. They were first classified by Schultz [1] , who recognized eight overall types of floor-fractured crater. These eight subtypes have widely differing appearances, a factor that could provide insight into formation mechanisms (different manifestations of the same mechanism, or indicators of varying formation mechanisms). Two formation mechanisms for FFCs were initially proposed: 1) magmatic intrusion [1], in which magma rising toward the surface in dikes encountered low-density breccia lenses beneath crater floors and spread laterally to form sills, raising and fracturing the crater floor. 2) viscous relaxation [2], in which the properties of the crust permitted viscous flow in the vicinity of the crater, causing long-wavelength relaxation of the topography and uplift and fracturing of the crater floor. Critical to distinguishing between these two end-member hypotheses and identifying others is a quantitative assessment of the topography of FFCs and knowledge of their regional and local settings. The purpose of this study is to use newly available Lunar Reconnaissance Orbiter (LRO) Lunar Orbiter Laser Altimeter (LOLA) altimeter and Lunar Reconnaissance Orbiter Camera (LROC) image data to provide an updated global catalog of the locations, classes, morphometric and morphologic characteristics of all lunar floor-fractured craters. We use the excellent 8-class system initially described in Schultz [1] as a starting point for classification and the enhanced LOLA/LROC data sets to examine and categorize all FFCs; we found evidence for a new FFC class, discernably different from the previously existing types. Our approach, and the global categorization of all FFCs, permits the spatial distribution of each FFC-subtype to be plotted and assessed allowing for further investigation into FFC formation mechanisms. Upon completion, the data set will be made available on our web site at http://www.planetary.brown.edu/html_pages/data.htm.

Jozwiak, L. M.↗

The effect of injection location on the spectrum of energetic magnetospheric particles

The role of local particle injections and accelerations in determining energetic particle spectra used as an indication of the radial diffusion of trapped magnetospheric particles is assessed. An idealized one-dimensional steady-state model of magnetospheric radial transport in which diffusion is balanced against particle sources and sinks is used to illustrate the effects of particle injection at a point and over a band of radii in which the observation point is immersed in particle spectra. For an injection spectrum uniformly distributed in space and a step function in energy, it is shown that the energy dependence of the measured spectrum is determined not only by adiabatic energization of the input spectrum but by the spatial structure of the injection and the radial dependence of the diffusion coefficient as well. The relevance of the results for observations of particle spectra in the terrestrial and Jovian magnetospheres is also considered

Birmingham, T. J.↗

Radial segregation induced by natural convection and melt/solid interface shape in vertical Bridgman growth

The roles of natural convection in the melt and the shape of the melt/solid interface on radial dopant segregation are analyzed for a prototype of vertical Bridgman crystal growth system by finite element methods that solve simultaneously for the velocity field in the melt, the shape of the solidification isotherm, and the temperature distribution in both phases. Results are presented for crystal and melt with thermophysical properties similar to those of gallium-doped germanium in Bridgman configurations with melt below (thermally destabilizing) and above (stabilizing) the crystal. Steady axisymmetric flow are classified according to Rayleigh number as either being nearly the growth velocity, having a weak cellular structure or having large amplitude cellular convention. The flows in the two Bridgman configurations are driven by different temperature gradients and are in opposite directions. Finite element calculations for the transport of a dilute dopant by these flow fields reveal radial segregation levels as large as sixty percent of the mean concentration. Segregation is found most severe at an intermediate value of Rayleigh number above which the dopant distribution along the interface levels as the intensity of the flow increases.

Chang, C. J.↗

Stochastic acceleration of energetic ions in Jupiter's magnetosphere

An equation governing the combined radial diffusion and stochastic acceleration of super-Alfvenic ions by magnetohydrodynamic waves in Jupiter's outer magnetosphere is derived. The formulation is based upon a total energy invariant of the adiabatic transport which applies to an isotropic distribution undergoing rapid pitch angle scattering by waves. An analytic solution to the double diffusion equation is obtained and numerical results are presented for two models of ion injection. The first model assumes S(+) and O(+) are injected throughout a broad region of space through photoionization of Jupiter's magnetospheric neutral wind and obtain an initial energy corresponding to the local corotation energy after pickup by the planetary magnetic field. The second model assumes a monoenergetic distribution of energetic protons is implanted in the middle magnetosphere by the action of field-aligned potential drops in Jupiter's auroral ionosphere. For both light and heavy ions the injection process creates a seed population of particles which are further accelerated nonadiabatically by the MHD waves and adiabatically through radial diffusion. A comparison of the theoretical results with a recent data analysis of Voyager low-energy charged particle measurements is made with very good agreement, thus providing a rigorous quantitative account of and definitive explanation for the high-energy ion component of Jupiter's magnetosphere.

Barbosa, D. D.↗

Research on Spectroscopy, Opacity, and Atmospheres

I propose to continue providing observers with basic data for interpreting spectra from stars, novas, supernovas, clusters, and galaxies. These data will include allowed forbidden line lists both laboratory and computed, for the first five to ten ions of all atoms and for all relevant diatomic molecules. I will eventually expend to all ions of the first thirty elements to treat far UV end X-ray spectra, and for envelope opacities. I also include triatomic molecules providing by other researchers. I have made CDs with Partridge and Schwanke's water data for work on M stars.The luna data also serve as input to my model atmosphere and synthesis programs that generated energy distributions, photometry, limb darkening, and spectra that can be used for planning observations and for fitting observed spectra. The spectrum synthesis programs produce detailed plots with the line identified. Grids of stellar spectra can be used for radial velocity-, rotation-, or abundance templates and for population synthesis. I am fitting spectra of bright stars to test the data and to produce atlases to guide observer. For each star the whole spectrum is computed from the UV to the far IR. The line data, opacities, models, spectra, and programs are freely distributed on CDs and on my web site and represent a unique resource for many NASA programs.

Oliversen, Ronald↗

Research on Spectroscopy, Opacity, and Atmospheres

I propose to continue providing observers with basic data for interpreting spectra from stars, novas, supernovas, clusters, and galaxies. These data will include allowed and forbidden line lists, both laboratory and computed, for the first five to ten ions of all atoms and for all relevant diatomic molecules. I will eventually expand to all ions of the first thirty elements to treat far UV and X-ray spectra, and for envelope opacities. I also include triatomic molecules provided by other researchers. I have also made CDs with Partridge and Schwenke's water data for work on UV stars. The line data also serve as input to my model atmosphere and synthesis programs that generate energy distributions, photometry, limb darkening, and spectra that can be used for planning observations and for fitting observed spectra. The spectrum synthesis programs produce detailed plots with the lines identified. Grids of stellar spectra can be used for radial velocity-, rotation-, or abundance templates and for population synthesis. I am fitting spectra of bright stars to test the data and to produce atlases to guide observers. For each star the whole spectrum is computed from the UV to the far IR. The line data, opacities, models, spectra, and programs are freely distributed on CDs and on my Web site and represent a unique resource for many NASA programs. I am now in full production of new line lists for atoms. I am computing all ions of all elements from H to Zn and the first 5 ions of all the heavier elements, about 800 ions. For each ion I treat as many as 61 even and 61 odd configurations, computing all energy levels and eigenvectors. The Hamiltonian is determined from a scaled-Hartree-Fock starting guess by least squares fitting the observed energy levels. The average energy of each configuration is used in computing scaled-Thomas-Fermi-Dirac wavefunctions for each configuration which in turn are used to compute allowed and forbidden transition integrals. These are multiplied into the LS allowed and forbidden transition arrays. The transition arrays are transformed to the observed coupling to yield the allowed and forbidden line lists. Results are put on the web as they are finished. Provided I get funding,there will be more than 500 million lines. I will then compare ion by ion, to all the laboratory and computed data in the literature and make up a working line list for spectrum synthesis and opacity calculations with the best available data. As the laboratory spectrum analyses are improved, I will redo the calculations with the new energy levels. My original plan when I started the new calculations was to run through all the atoms using my old Cray programs from the 1980's that were limited to 1100 x 1100 arrays in the Hamiltonian for each J. Then I would go back and rerun the more complicated cases with 3000 x 3000 arrays so that I could include many more configurations and more configuration interactions. At present I am limited to 61 even and 61 odd configurations and I try to include everything up through n = 9. The current program runs on Alpha workstations. I decided to test the big program on Fe I and Fe II to see whether there was any great difference in the low configurations compared to those from the Cray program. Besides increasing the number of E1 lines by a factor of 6 to 7.7 million, there was an unexpected result: the electric quadrupole transitions were 10 times stronger than before because the transition integrals are weighted by r(exp 2) ---they become very large for high n, and because there are numerous configuration interactions that mix the low and high configurations. As a check I was able to reproduce Carstang's (1962) lower results by running his three configurations with my program. Since my model atom is still only a subset of a real Fe II ion, the true quadrupole A values are probably larger than mine. The magnetic dipole lines are affected by the mixing but the overall scale does not change. Because of this scovery I decided that there was no point in computing the small array cases. I have been running with as many configurations as I can and with thousands of parameters in the Hamiltonian. The computer runs take much longer to set up and produce than I had expected. I have concentrated on redoing the low iron group spectra, especially to get data for supernova modelers. I have done only Ca I -- Zn I, Ca II -- Zn II, CU I -- Cu XXIX, Zn I - Zn XXX, for practice at high stages of ionization, C I, C II, S I, and CL I and Ag I for people who were working on the laboratory spectra. Check my web site kurucz.harvard.edu for current additions. My latest calculations have been for carbon I and sulphur I, and silicon I is under way using the same elaborate approach as for C I, which took many months to do. These line lists greatly increase the number of lines in the ultraviolet, in the visible, and especially in the infrared. They will increase the opacity in A, F, and G stars. They will account for many unidentified lines in the sun.

Kurucz, Robert L.↗

Impeller blade design method for centrifugal compressors

The design of a centrifugal impeller with blades that are aerodynamically efficient, easy to manufacture, and mechanically sound is discussed. The blade design method described here satisfies the first two criteria and with a judicious choice of certain variables will also satisfy stress considerations. The blade shape is generated by specifying surface velocity distributions and consists of straight-line elements that connect points at hub and shroud. The method may be used to design radially elemented and backward-swept blades. The background, a brief account of the theory, and a sample design are described.

Jansen, W.↗

Investigation of the three-dimensional flow field within a transonic fan rotor - Experiment and analysis

An experimental investigation of the three-dimensional flow field through a low aspect ratio, transonic, axial flow fan rotor has been conducted, using an advanced laser anemometer (LA) system. Laser velocimeter measurements of the rotor flow field at the design operating speed and over a range of throughflow conditions are compared to analytical solutions. The numerical technique used herein yields the solution to the full, three-dimensional, unsteady Euler equations using an explicit time-marching, finite volume approach. The numerical analysis, when coupled with a simplified boundary layer calculation, generally yields good agreement with the experimental data. The test rotor has an aspect ratio of 1.56, a design total pressure ratio of 1.629 and a tip relative Mach number of 1.38. The high spatial resolution of the LA data matrix (9 radial x 30 axial x 50 blade-to-blade) permits details of the transonic flow field such as shock location, turning distribution, and blade loading levels to be investigated and compared to analytical results.

Pierzga, M. J.↗