SEARCH · Engineering Papers

Results for “Precise”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

All sources NASA NTRS DOE OSTI

NASA NTRS1987

U-238-U-234-Th-230-Th-232 systematics and the precise measurement of time over the past 500,000 years

A method is presented for the high-precision measurement of the Th-230 abundance in corals by isotope-dilution mass spectrometry using techniques developed by Chen and Wasserburg (1980, 1981) and Chen et al. (1986). It is shown that 6 x 10 to the 8th atoms of Th-230 can be measured to + or - 30 percent (2 sigma) and 2 x 10 to the 10th atoms of Th-230 to + or - 2 percent. The time over which useful age data on corals can be obtained ranges from a few years to about 500 ky, with the uncertainty in age ranging from 5 y for a 180-y-old coral, to 44 y for a 8294-y-old coral, to 1.1 ky for a 123.1-ky-old coral. Ages were determined with high analytical precision for several corals that grew during high sea-level stands about 120 ky ago, supporting the view that the dominant cause of Pleistocene climate change was Milankovitch forcing.

Edwards, R. Lawrence↗

NASA NTRS1987

Fast-response, high-precision carbon monoxide sensor using a tunable diode laser absorption technique

A tunable diode laser instrument, denoted as DACOM (Differential Absorption CO Measurement), has been developed to meet the fast-response, high-precision CO measurement needs of the GTE (Global Tropospheric Experiment) program. Under the GTE program, DACOM participated in the three field missions of CITE 1 (Chemical Instrumentation Test and Evaluation 1), a project involving the intercomparison of trace gas measurement techniques. DACOM performance, including analyses of measurement error sources, is discussed for the ground-based mission at Wallops Island, VA (summer 1983), and two missions on the NASA CV-990 (fall 1983 and spring 1984). Examples of fast-response (about 1 s), high-precision (+ or - 1 part per billion by volume, + or - 1.5 percent of reading) airborne data are included to illustrate the capability of this instrument.

Sachse, Glen W.↗

NASA NTRS1988

Assuring Precise LFC-Suction-Strip Porosities

Masking technique in bonding perforated titanium sheets to substructures. Technique to obtain precise control of widths of perforated titanium suction strips. Precision required for successful laminar-flow control, (LFC) in flight environments.

Gallimore, Frank H.↗

NASA NTRS1986

GPS vertical axis performance enhancement for helicopter precision landing approach

Several areas were investigated for improving vertical accuracy for a rotorcraft using the differential Global Positioning System (GPS) during a landing approach. Continuous deltaranging was studied and the potential improvement achieved by estimating acceleration was studied by comparing the performance on a constant acceleration turn and a rough landing profile of several filters: a position-velocity (PV) filter, a position-velocity-constant acceleration (PVAC) filter, and a position-velocity-turning acceleration (PVAT) filter. In overall statistics, the PVAC filter was found to be most efficient with the more complex PVAT performing equally well. Vertical performance was not significantly different among the filters. Satellite selection algorithms based on vertical errors only (vertical dilution of precision or VDOP) and even-weighted cross-track and vertical errors (XVDOP) were tested. The inclusion of an altimeter was studied by modifying the PVAC filter to include a baro bias estimate. Improved vertical accuracy during degraded DOP conditions resulted. Flight test results for raw differential results excluding filter effects indicated that the differential performance significantly improved overall navigation accuracy. A landing glidepath steering algorithm was devised which exploits the flexibility of GPS in determining precise relative position. A method for propagating the steering command over the GPS update interval was implemented.

Denaro, Robert P.↗

NASA NTRS1987

Precision positioning of earth orbiting remote sensing systems

Decimeter tracking accuracy is sought for a number of precise earth sensing satellites to be flown in the 1990's. This accuracy can be achieved with techniques which use the Global Positioning System (GPS) in a differential mode. A precisely located global network of GPS ground receivers and a receiver aboard the user satellite are needed, and all techniques simultaneously estimate the user and GPS satellite states. Three basic navigation approaches include classical dynamic, wholly nondynamic, and reduced dynamic or hybrid formulations. The first two are simply special cases of the third, which promises to deliver subdecimeter accuracy for dynamically unpredictable vehicles down to the lowest orbit altitudes. The potential of these techniques for tracking and gravity field recovery will be demonstrated on NASA's Topex satellite beginning in 1991. Applications to the Shuttle, Space Station, and dedicated remote sensing platforms are being pursued.

Melbourne, William G.↗

NASA NTRS1989

Attaching Precise Mirrors To Lightweight Supports

Mirrors formed on optical masters and glued in place. Technique forms precise mirror surfaces on lightweight, rigid, imprecise graphite-composite substrates. Resembles that used to make lightweight replica mirrors and gratings. Layer of parting material deposited on master optical surface of precise desired shape. Parting layer must be very thin to minimize degradation of replica. Enables fabrication of lightweight mirrors of high surface finish suitable for use at short wavelengths.

Meinel, Aden B.↗

NASA NTRS1988

Precise orbit determination for NASA's earth observing system using GPS (Global Positioning System)

An application of a precision orbit determination technique for NASA's Earth Observing System (EOS) using the Global Positioning System (GPS) is described. This technique allows the geometric information from measurements of GPS carrier phase and P-code pseudo-range to be exploited while minimizing requirements for precision dynamical modeling. The method combines geometric and dynamic information to determine the spacecraft trajectory; the weight on the dynamic information is controlled by adjusting fictitious spacecraft accelerations in three dimensions which are treated as first order exponentially time correlated stochastic processes. By varying the time correlation and uncertainty of the stochastic accelerations, the technique can range from purely geometric to purely dynamic. Performance estimates for this technique as applied to the orbit geometry planned for the EOS platforms indicate that decimeter accuracies for EOS orbit position may be obtainable. The sensitivity of the predicted orbit uncertainties to model errors for station locations, nongravitational platform accelerations, and Earth gravity is also presented.

Williams, B. G.↗

NASA NTRS1989

Universal precision sine bar attachment

An improved sine bar apparatus for the precise measurement of angles for machining operation. The sine bar apparatus comprises a flat, rectangular base which has an upper and a lower surface with four sides. A collet adapter extended from one side of the base at right angles thereto in a plane which is parallel to the upper surface of the base and there is at least one slot extending transversely of one side of the base. A reference bar is attached to one of the other sides of the base and has a support surface which extends above the upper surface of the base. An elongated, generally rectangular sine bar, which has a reference surface extending along one side, is pivotally connected to the base and is supported on the upper surface of the base. The sine bar is pivotally connected at a point intermediate its ends, though the transverse slot adjacent the side of which the reference bar is attached, and has one of its ends in contact with the support surface of the reference bar. The other end of the sine bar is separated from the support surface of the reference bar means of a plurality of gauges or gauge blocks which are precisely machined to cause the reference surface of the sine bar to form a predetermined angle with the longitudinal axis of the collet adapter. The reference bar and the sine bar can be attached to either of the three sides of the base to provide a variation in the angle measured.

Franklin D Mann↗

NASA NTRS1988

Precise orbit determination for NASA's Earth Observing System using GPS

A precision orbit determination technique for NASA's Earth Observing System (EOS) is discussed. The technique exploits the redundant geometric information from GPS carrier phase and P-code pseudorange measurements and minimizes the requirements for precision dynamical modeling. Performance estimates for the application of the technique to the orbit geometry planned for the EOS platforms show that decimeter accuracies of orbit position may be obtained. The sensitivity of the predicted orbit uncertainties to model errors for station locations, nongravitational platform accelerations, and earth gravity are presented.

Williams, Bobby G.↗

NASA NTRS1988

GPS-based precision orbit determination - A Topex flight experiment

Plans for a Topex/Poseiden flight experiment to test the accuracy of using GPS data for precision orbit determination of earth satellites are presented. It is expected that the GPS-based precision orbit determination will provide subdecimeter accuracies in the radial component of the Topex orbit when the extant gravity model is tuned for wavelengths longer than about 1000 kms. The concept, design, flight receiver, antenna system, ground processing, and data processing of GPS are examined. Also, an accurate quasi-geometric orbit determination approach called nondynamic or reduced dynamic tracking which relies on the use of the pseudorange and the carrier phase measurements to reduce orbit errors arising from mismodeled dynamics is discussed.

Melbourne, William G.↗

NASA NTRS1988

A demonstration of sub-meter GPS orbit determination and high precision user positioning

It was demonstrated that the submeter GPS (Global Positioning System) orbits can be determined using multiday arc solutions with the current GPS constellation subset visible for about 8 h each day from North America. Submeter orbit accuracy was shown through orbit repeatability and orbit prediction. North American baselines of 1000-2000 km length can be estimated simultaneously with the GPS orbits to an accuracy of better than 1.5 parts in 108 (3 cm over 2000 km distance) with a daily precision of two parts in 108 or better. The most reliable baseline solutions are obtained using the same type of receivers and antennas at each end of the baseline. Baselines greater than 1000 km distance from Florida to sites in the Caribbean region have also been determined with daily precision of 1-4 parts in 108. The Caribbean sites are located well outside the fiducial tracking network and the region of optimal GPS common visibility. Thus, these results further demonstrate the robustness of the multiday arc GPS orbit solutions.

Bertiger, Willy I.↗

NASA NTRS1989

Active-member control of precision structures

This paper presents the results of closed loop experiments that use piezoelectric active-members to control the flexible motion of a precision truss structure. These experiments are directed toward the development of high performance structural systems as part of the Control/Structure Interaction program at JPL. Order of magnitude reductions in dynamic response are achieved with relatively simple control techniques. The practical implementation of high stiffness, high bandwidth active-members in a precision structure highlights specific issues of importance relating to the modelling and implementation of active-member control.

Fanson, J. L.↗

NASA NTRS1989

Flight evaluation of pursuit displays for precision approach of powered-lift aircraft

Flight experiments with NASA Ames Research Center's quiet short-haul research aircraft evaluated the influence of pursuit displays on the ability of pilots to execute precision-instrument flight operations in the terminal area, particularly approaches to and landings on a short runway. The aircraft is a powered-lift, short-takeoff and landing configuration equipped with a modern digital fly-by-wire flight control system, a head-up display, and a color head-down display that make it possible to investigate control and display concepts for full-envelope, powered-lift operations. Flight-path-oriented displays that provide status and command information in a format with minimal clutter were investigated. The pilots could fly the aircraft with the precision associated with flight-director guidance and with a high degree of situation awareness. The primary benefits of this display concept were realized when the pilot was required to execute a complex transition and approach under instrument conditions and in the presence of a wide range of wind and turbulence conditions.

Hynes, Charles S.↗

NASA NTRS1989

Cross spectral analysis to determine the resolution and precision of Jimsphere and windsonde wind measurements

Spectral analysis of wind profiles measured by two systems, one consisting of Jimsphere balloons tracked by two precision tracking radars and the other of the Windsonde and a Meteorological Sounding System (MSS) tracker, was carried out to assess the effective resolution and precision of these two systems. Results obtained from the cross-spectral analysis of seven nearly simultaneous profiles from Jimsphere and MSS-Windsonde releases obtained in March and April, 1985 indicate that the coherence between the Jimsphere and Windsonde profiles was not as strong as between two independent radars tracking the same Jimsphere. The effective vertical resolution for the Jimsphere measurements was 150-300 m, while that for the Windsonde was above 500 m. The amplitude of the incoherent noise in the Jimsphere measurements was approximately 0.25 m/s, while that of the MSS-tracked Windsonde was about 1.2 m/s.

Smith, Steve A.↗

NASA NTRS1988

Advanced composite materials for precision segmented reflectors

The objective in the NASA Precision Segmented Reflector (PSR) project is to develop new composite material concepts for highly stable and durable reflectors with precision surfaces. The project focuses on alternate material concepts such as the development of new low coefficient of thermal expansion resins as matrices for graphite fiber reinforced composites, quartz fiber reinforced epoxies, and graphite reinforced glass. Low residual stress fabrication methods will be developed. When coupon specimens of these new material concepts have demonstrated the required surface accuracies and resistance to thermal distortion and microcracking, reflector panels will be fabricated and tested in simulated space environments. An important part of the program is the analytical modeling of environmental stability of these new composite materials concepts through constitutive equation development, modeling of microdamage in the composite matrix, and prediction of long term stability (including viscoelasticity). These analyses include both closed form and finite element solutions at the micro and macro levels.

Stein, Bland A.↗

NASA NTRS1989

Support trusses for large precision segmented reflectors: Preliminary design and analysis

Precision Segmented Reflector (PSR) technology is currently being developed for a range of future applications such as the Large Deployable Reflector. The structures activities at NASA-Langley are outlined in support of the PSR program. Design concepts are explored for erectable and deployable support structures which are envisioned to be the backbone of these precision reflectors. Important functional requirements for the support trusses related to stiffness, mass, and surface accuracy are reviewed. Proposed geometries for these structures and factors motivating the erectable and deployable designs are discussed. Analytical results related to stiffness, dynamic behavior, and surface accuracy are presented and considered in light of the functional requirements. Results are included for both a 4-meter-diameter prototype support truss which is currently being designed as the Test Bed for the PSR technology development program, and for two 20-meter support structures.

Collins, Timothy J.↗

NASA NTRS1989

Precision segmented reflector, figure verification sensor

The Precision Segmented Reflector (PSR) program currently under way at the Jet Propulsion Laboratory is a test bed and technology demonstration program designed to develop and study the structural and material technologies required for lightweight, precision segmented reflectors. A Figure Verification Sensor (FVS) which is designed to monitor the active control system of the segments is described, a best fit surface is defined, and an image or wavefront quality of the assembled array of reflecting panels is assessed

Manhart, Paul K.↗

NASA NTRS1989

Experimental evaluation of active-member control of precision structures

The results of closed loop experiments that use piezoelectric active-members to control the flexible motion of a precision truss structure are described. These experiments are directed toward the development of high-performance structural systems as part of the Control/Structure Interaction (CSI) program at JPL. The focus of CSI activity at JPL is to develop the technology necessary to accurately control both the shape and vibration levels in the precision structures from which proposed large space-based observatories will be built. Structural error budgets for these types of structures will likely be in the sub-micron regime; optical tolerances will be even tighter. In order to achieve system level stability and local positioning at this level, it is generally expected that some form of active control will be required.

Fanson, James↗