Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Proton beam dynamics in bare IOTA with intense space-charge

We are commissioning a 2.5-MeV proton beam for the Integrable Optics Test Accelerator at Fermilab, allowing experiments in the strong space-charge regime with incoherent betatron tune shifts nearing 0.5. Accurate modelling of space-charge dynamics is vital for understanding planned experiments. We compare anticipated emittance growth and beam loss in the bare IOTA configuration using transverse space-charge models in Xsuite, PyORBIT, and MADX simulation codes. Our findings reveal agreement within a factor of 2 in core phase-space density predictions up to 100 synchrotron periods at moderate beam currents, while tail distributions and beam loss show significant differences.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Thermal and mechanical performance of gypsum composites containing fly ash cenosphere encapsulated phase change materials

Utilizing phase change materials (PCMs) within construction materials improves the thermal energy storage capabilities in the built environment. Notably, integrating PCMs into drywalls presents a promising avenue to reduce building energy use. However, incorporating PCMs into drywalls poses challenges, particularly reduced mechanical properties and workability limitations as it can adversely affect the hardening and cohesiveness of gypsum composites. To address these challenges, this study explores a novel strategy to incorporate PCMs into gypsum composites through fly ash cenosphere-encapsulated PCM, namely CenoPCM, aiming to enhance the mechanical properties and thermal conductivity over existing commercial counterparts. An experimental program was conducted to study the impact of the inclusion of CenoPCM on the mechanical and thermal performance of gypsum composites, and the results were compared to those of commercially available polymerencapsulated PCM benchmark (Micronal). The findings highlighted that PCM-charged samples exhibited up to 95.90 J/g (CenoPCM) of latent heat with 70 % CenoPCM loading. The results of mechanical tests also showed that CenoPCM outperformed its polymer-encapsulated counterpart, achieving 55 % higher mechanical strength on average. Here, this improvement is attributed to the rigid shell of fly ash cenosphere (FAC) serving as a PCM carrier, providing a skeleton-like structure to gypsum composites for higher load-bearing capacity. Additionally, hotbox tests demonstrated that the CenoPCM-charged wall panels yielded a 20 % higher thermal conductivity and a 22 % increased time lag compared to Micronal PCM-charged panels, indicating its potential to shift the peak load in buildings.

Ceno PCM↗
DOE OSTI2022

Liquid Salt Combined-Cycle Pilot Plant Design

The work described in this report is responsive to the Office of Fossil Energy program ‘Energy Storage for Fossil Power Generation.’ This Phase I report has been prepared by Pintail Power LLC, with support from Nexant ECA, Electric Power Research Institute (EPRI) and Southern Company Services as a deliverable for the U.S. Department of Energy for NETL Award DE-FE-00320016. The Liquid Salt Combined Cycle™ (LSCC™) technology provides large-scale energy storage integrated with Fossil Electric Generating Units (FEGUs) to meet critical needs in the energy transition by providing: • the lowest cost large-scale storage for time-shifting of renewable energy, • superior fuel efficiency to reduce GHGs from dispatchable resources, • flexible capacity and ramping to balance variability of wind and solar resources, • essential grid stability services to assure reliability of a low-carbon grid. The LSCC approach: • employs equipment that has already been proven in utility service, • uses safe, non-toxic, non-degrading, perpetual-life storage medium, • leverages and repurposes existing FEGU assets, • expands the value stack of energy storage to reduce market, financing, and commodity risks. Pintail Power has developed the LSCC technology to meet the need for reliable, efficient, and cost-effective integration of Variable Renewable Energy (VRE) into a low-carbon electric grid by coupling proven thermal energy storage with proven gas turbines, steam turbines, and heat transfer equipment. This novel approach is intended to address the key issues facing the grid and operators of renewable and fossil generating units including: • Overgeneration and curtailment of renewables, • Need for fast ramping dispatchable resources, • Improved efficiency and flexibility of fossil units, • Additional peaking capacity to support electrification of transportation and heating, • Provision of reliability services to support high penetration of VRE, especially synchronous inertia and fast frequency response. A Technology Readiness assessment by EPRI confirmed that LSCC technology consists of commercially proven hardware used in industrial and utility applications. Although the novel LSCC approach has not yet been demonstrated as a complete system, interfaces between major components have been conservatively specified. A Phase III pilot is planned to demonstrate equipment integration and operation. The patented innovation is removal of the evaporator section from the exhaust heat recovery system, with the evaporation performed by stored energy in a separate steam generator. This arrangement couples renewable and fossil power generation via long-duration energy storage to deliver cost, performance, and operational synergies, including superior charging and discharging flexibility, reduced fuel consumption and lower CO 2 emissions compared to conventional Combined Cycle Power Plants, and low-cost, large-scale energy storage. The LSCC technology is composed of proven equipment integrated with gas turbine exhaust heat in a novel system. During charging, electric heaters raise the salt temperature as it flows from the Cold Salt Tank to the Hot Salt Tank. During discharging, hot salt produces steam from feedwater that is heated with gas turbine exhaust, which also superheats steam to drive a steam turbine. LSCC technology can be added to any combustion-turbine to integrate renewable energy, provide needed grid services, and increase the value of fossil electric generating units based on the technology’s following attributes: • Long-duration storage enables time-shifting of VRE to avoid curtailment and impairment of renewable assets. • Long storage duration combined with fast-charging capability increases arbitrage opportunities by storing more energy when the price is low and discharging more hours when the price is high. • Long storage duration allows resource adequacy to be supplied across multiple days to increase reliability and reduce risk. • The stored energy reduces fuel heat rate and GHG emissions, and increases merit, so the LSCC dispatches earlier and longer to increase the plant’s capacity factor and asset value. • The stored energy enables pre-heating and startup of the steam cycle, without operating the gas turbine, to enable fast startup and ramping when dispatched for discharge. • The steam turbine can operate without the gas turbine so it can provide valuable synchronous inertia during charging without consuming fuel. • Fast frequency response and regulation services can be provided during charging using solid-state heater and pump controls to vary the charge power input in response to grid signals. • The LSCC system can be configured for resilience including black start, islanded/micro-grid operation, and even self-recharging of storage using either gas turbine power or gas turbine exhaust heat. The commercialization plan is to add LSCC technology to existing simple cycle gas turbine power plants with the 50MW GE LM6000 aero-derivative gas turbine as the reference design basis. A Techno-economic assessment of the reference design evaluated the benefits (Levelized Avoided Cost of Energy) and costs (Levelized Cost of Energy). The plant definition included all major systems and budgetary vendor quotes. Pintail Power and NexantECA developed the overall cost estimate for the LSCC plant up to the total plant cost level, following the DOE-NETL cost estimate guidelines at AACE Class 3 (-20%/+30%). This includes the equipment cost, bulk material, direct and indirect labor costs to arrive at the bare erected cost. Engineering costs are factored from the BEC and added to it to arrive at the EPC cost. Process and project contingencies were then factored from the EPC cost and rolled-up to yield the total plant cost of $\$$184 million for 1746 MWh of discharge electricity. • At $\$$105/kWh, the reference plant costs less than any of the Energy Storage Systems evaluated by PNNL in 2020 for the Energy Storage Grand Challenge. Operations and Maintenance cost estimates were scaled from combined cycle practice, assuming that the LSCC unit was co-located with and sharing some labor expense with other units, to arrive at $\$$2.2 million per year. Plant economics were evaluated using prices from the ERCOT Day-Ahead Market for calendar year 2019 (excluding the market disruptions from the COVID pandemic and the February 2020 deep freeze event). Assuming economic dispatch in the ERCOT Day-Ahead market, the reference plant capacity factor would have discharged for 2777 hours at 91.9 MW, a 31.66% capacity factor, with a marginal cost of $\$$25.59/MWh, and a LACE of $\$$82.41/MWh. Fixed charges were calculated according to EIA guidelines to arrive at an LCOE of $\$$83.48. The benefit-to-cost ratio of 0.99 suggests that the reference plant would have been cost-effective and competitive in the market. EPRI interviewed selected utilities to gauge the need for, applicability of and interest in the LSCC system. Several utilities are currently managing increased load growth along with the inclusion of increasing levels of renewable generation, putting pressure on conventional generation by requiring increased turndown requirements and ultimately lower capacity factors. All of the utilities interviewed have CO 2 reduction targets in the 2030-2050 timeframe that will severely limit the participation of fossil generation and require better utilization of carbon free generation. While there is limited opportunity for storage in the current markets, the utilities interviewed stated that there will be a substantial need for long duration energy storage in the future given the expected trends. Utilizing an energy storage system will generally be preferred over new gas capacity in some cases, with the capabilities of the LSCC system being a potential option for retrofit to existing simple cycle gas turbine units, allowing them to deliver greater participation in the market with lower carbon intensity. A technology gap assessment and technology maturation plan identified a pilot-scale demonstration as the final step before commercialization. Key gaps to be addressed during the Phase II FEED (Front-End Engineering Design) are component selection and design, commissioning procedures, and operational procedures and the control system for LSCC charging and discharging. The project team has been expanded to include Wood Group PLC as EPC. The proposed Phase II work leads to a pilot-scale engineering demonstration (TRL 6) to be conducted at Southern Company’s Plant Rowan, where the prototype system will perform “all the functions that will be required of the operational system.” The proposed pilot will facilitate commercialization (TRL-9) by scale-up to utility-scale systems integrated with peaking GTs or directly to facility scale systems using industrial GTs. The conceptual design for the pilot plant focuses on the novel integration aspects of LSCC technology. A slipstream of gas turbine exhaust will feed a waste heat recovery unit coupled to a molten salt steam generator heated by stored energy. The pilot is intended to demonstrate all key operating modes of the LSCC technology during charging, discharging and standby. The pilot equipment will be approximately one-seventh scale of the LM6000 commercial target and is expected to have commercial off-ramp potential for facility-scale applications.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2026

Solid state 59 Co NMR study of a Np(VII) compound

Np(VII) compounds with [Co(NH 3 ) 6 ] 3+ cations were synthesized and structurally examined using powder X-ray diffraction. Multiple phases were observed, consisting of octahedral [Co(NH 3 ) 6 ] 3+ cations, discrete tetragonal bipyramidal [NpO 4 (OH) 2 ] 3− anions, and waters of hydration. Electric field gradient tensors at Co sites were measured by solid state 59 Co nuclear magnetic resonance (NMR) spectroscopy and compared with theoretical calculations. The relative contributions of the chemical shift and electric field tensors to the NMR lineshape were determined by recording spectra at field strengths of 7.04 and 11.74 Tesla. Further, the evolution of structure and morphology as a function of sample age and the effects on NMR spectral parameters has also been investigated. These results demonstrate the use of NMR at multiple fields to expand understanding of the stability and electronic structure of high valent neptunium compounds.

heptavalent neptunium↗
DOE OSTI2022

High-Pressure Investigation of 2,4,6-Trinitro-3-bromoanisole (TNBA): Structural Determination and Piezochromism

Understanding phase transitions in energetic materials is crucial for developing predictive models of detonation. 2,4,6-Trinitro-3-bromoanisole (TNBA), an energetic material, was studied in its single-crystal form up to pressures of 45 GPa in a diamond anvil cell. The material was characterized by using X-ray, Raman, and optical transmission measurements. From single-crystal X-ray diffraction, the ambient structure of TNBA was determined which crystallizes in the P2 1 /c space group having four molecular units per unit cell. The X-ray data up to 9.2 GPa were fitted to a third-order Birch–Murnaghan equation of state by using the parameters K o = 13.2(2.4) GPa and K p = 5.1(1.4). Between 6.8 and 7.3 GPa, a phase transition was inferred in TNBA from concurrent fading of X-ray diffraction, disappearance of Raman peaks, increase in sample fluorescence, and discontinuous color change. The new phase was consistent with an amorphous state of at least partially intact molecules judging from the presence of higher-order Raman modes and irreversibility of the Raman spectra upon release. Piezochromism was observed with the translucent yellow TNBA gradually darkening and becoming opaque black at ~25 GPa. This correlated to the absorption edge gradually shifting to the red in the visible spectrum. Signs of two possible additional structural transitions were detected in the 32.4–41.0 GPa range as suggested by a jump in the absorption edge, the irreversible changes in the absorption spectrum upon release to ambient pressure, and by the lack of Raman modes in recovered samples. Here, the crystal and electronic structures of TNBA were also investigated up to 10 GPa by using DFT calculations and crystal structure prediction (CSP) simulations. In agreement with the experimentally observed transition at 7 GPa, the simulations at 10 GPa found a bevy of polymorphs lower in enthalpy and higher in density than P2 1 /c. The lowest calculated enthalpy structure was determined to be P2 1 2 1 2 1 , being in a different space group than the ambient experimental result.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Low-Threshold Visible-to-Ultraviolet Solid-State Triplet-Fusion Upconversion

Visible-to-ultraviolet (UV) triplet-triplet annihilation (TTA) upconversion is an energy-relevant photon-management strategy that converts visible photons into UV photons capable of driving high-energy photochemical processes. Practical implementation requires solid-state thin films, which often require high excitation power. Here, we demonstrate the first solid-state visible-to-UV TTA upconversion thin-film device, using 1,4-bis((tricyclopentylsilyl)ethynyl)naphthalene (TCPS-NAP) as the annihilator and tris(2-phenylpyridine)iridium(III) (Ir(ppy) 3 ) as the sensitizer on silver. Under incoherent 455 nm excitation, the device exhibits blue-to-UV upconversion with a threshold of 4.8 mW/cm 2 . Using surface plasmons in the planar silver film, we achieve green-to-UV upconversion with a 1.11 eV anti-Stokes shift and 6.9 mW/cm 2 threshold, a 12.2 × threshold enhancement over far-field 532 nm excitation. In solution, TCPS-NAP shows excimer-dominated anti-Stokes emission rather than UV upconversion. These results establish a platform for harvesting low-intensity visible light to drive UV processes while demonstrating that solution-phase screening does not predict solid-state upconversion performance.

Luminescence↗
DOE OSTI2025

Mechanochemical α to β phase transition of U 3 O 8

Recognized as the most stable phase of uranium oxide, α-U 3 O 8 is widely used throughout the nuclear fuel cycle for safe storage and transportation. There is, however, a lack of understanding of the thermodynamic relationship between α-U 3 O 8 and its polymorph, β-U 3 O 8 . This research contributes new knowledge regarding the kinetics and mechanism of a previously described mechanochemical phase transition between the α- and β-U 3 O 8 polymorphs to improve the understanding of their thermodynamic relationship. In this work, tumble milling of α-U 3 O 8 using different milling media shows an ingrowth of the β-phase over time, with an observed correlation between media density, percent conversion and lattice strain. Anisotropic peak broadening observed within collected X-ray diffraction powder patterns suggests the preservation of uranium polyhedral layered sheets throughout the milling process. Preservation of the sheets implies a shear-induced slip mechanism occurring through in-plane shifting of uranium polyhedra along lattice planes perpendicular to the polyhedral sheets.

Roach, Jordan M. [Oak Ridge National Laboratory (O↗
DOE OSTI2020

Light induced electron spin resonance properties of van der Waals CrX 3 (X = Cl, I) crystals

The research on layered van der Waals (vdW) magnets is rapidly progressing owing to exciting fundamental science and potential applications. In bulk crystal form, CrCl 3 is a vdW antiferromagnet with in-plane ferromagnetic ordering below 17 K, and CrI 3 is a vdW ferromagnet below 61 K. In this paper, we report on the electron spin resonance (ESR) properties of CrCl 3 and CrI 3 single crystals upon photo-excitation in the visible range. We noticed remarkable changes in the ESR spectra upon illumination. In the case of CrCl 3 , at 10 K, the ESR signal is shifted from g = 1.492 (dark) to 1.661 (light), the linewidth increased from 376 to 506 Oe, and the signal intensity is reduced by 1.5 times. Most interestingly, the observed change in the signal intensity is reversible when the light is cycled on/off. We observed almost no change in the ESR spectral parameters in the paramagnetic phase (>20 K) upon illumination. Upon photo-excitation of CrI 3 , the ESR signal intensity is reduced by 1.9 times; the g-value increased from 1.956 to 1.990; the linewidth increased from 1170 to 1260 Oe at 60 K. These findings are discussed by taking into account the skin depth, the slow relaxation mechanism, and the appearance of low-symmetry fields at the photo-generated Cr 2+ Jahn–Teller centers. Such an increase in the g-value as a result of photo-generated Cr 2+ ions is further supported by our many-body wavefunction calculations. This work has the potential to extend to monolayer vdWs magnets by combining ESR spectroscopy with optical excitation and detection.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Defect-Driven Redox Interplay on Anatase TiO 2 : Surface-Structure Dependent Activation for CO 2 Hydrogenation Catalysis

Titanium dioxide (TiO 2 ) is one of the most extensively studied oxides as an active catalyst or catalyst support, particularly in energy and environmental applications, but the atomistic mechanisms governing its dynamic response to reactive environments and their correlation to reactivity remain largely elusive. Using in situ environmental transmission electron microscopy (ETEM), synchrotron X-ray diffraction (XRD), ambient-pressure X-ray photoelectron spectroscopy (AP-XPS), temperature-programmed reduction (TPR), reactivity measurements, and theoretical modeling, we reveal the dynamic interplay between oxygen loss and replenishment of anatase TiO 2 under varying reactive conditions. Under H 2 exposure, anatase TiO 2 undergoes surface reduction via lattice oxygen loss, forming Ti 3 O 5 . In contrast, CO 2 exposure induces oxygen replenishment, reversing stoichiometry. In mixed H2/CO 2 environments, the reverse water–gas shift (RWGS) reaction proceeds selectively on stepped and high-indexed TiO 2 surfaces, whereas the thermodynamically stable TiO 2 (101) surface remains inactive and intact. Critically, H 2 pretreatment generates oxygen vacancies on TiO 2 (101), transforming it into an active Ti 3 O 5 or defect-rich surface that catalyzes RWGS. By correlating surface structure, defect dynamics, and gas-phase interactions, this work deciphers the competition between H 2 -driven reduction and CO 2 -driven oxidation pathways at the atomic scale. Furthermore, these insights establish defect engineering as a strategic lever to activate inert TiO 2 facets, advancing the design of adaptive catalysts for sustainable fuel synthesis technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2020

EXAFS investigations of temperature-dependent structure in cobalt-59 molecular NMR thermometers

Cobalt-59 nuclei are known for extremely thermally sensitive chemical shifts (δ), which in the long term could yield novel magnetic resonance thermometers for bioimaging applications. In this manuscript, we apply extended X-ray absorption fine structure (EXAFS) spectroscopy for the first time to probe the exact variations in physical structure that produce the exceptional thermal sensitivity of the 59 Co NMR chemical shift. We apply this spectroscopic technique to five Co(III) complexes: [Co(NH3)6]Cl3 (1), [Co(en) 3 ]Cl 3 (2) (en = ethylenediamine), [Co(tn) 3 ]Cl 3 (3) (tn = trimethylenediamine), [Co(tame) 2 ]Cl 3 (4) (tame = 1,1,1-tris(aminomethyl)ethane), and [Co(diNOsar)]Cl 3 (5) (diNOsar = dinitrosarcophagine). The solution-phase EXAFS data reveal increasing Co–N bond distances for these aqueous complexes over a ~50 °C temperature window, expanding by Δr (Co–N) = 0.0256(6) Å, 0.0020(5) Å, 0.0084(5) Å, 0.0006(5) Å, and 0.0075(6) Å for 1–5, respectively. Computational analyses of the structural changes reveal that increased connectivity between the donor atoms encourages complex structural variations. Finally, these results imply that rich temperature-dependent structural variations define 59 Co NMR thermometry in macrocyclic complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Light-induced transitions of polar state and domain morphology of photoferroelectric nanoparticles

Using the Landau-Ginzburg-Devonshire approach, we study light-induced phase transitions, evolution of polar state and domain morphology in photo-ferroelectric nanoparticles (NPs). Light exposure increases the free carrier density near the NP surface and may in turn induce phase transitions from the nonpolar paraelectric to the polar ferroelectric phase. Using the uniaxial photo-ferroelectric Sn 2 P 2 S 6 as an example, here we show that visible light exposure induces the appearance and vanishing of striped, labyrinthine or curled domains and changes in the polarization switching hysteresis loop shape from paraelectric curves to double, pinched and single loops, as well as the shifting in the position of the tricritical point. Furthermore, we demonstrate that an ensemble of non-interacting photo-ferroelectric NPs may exhibit superparaelectric-like features at the tricritical point, such as strongly frequency-dependent giant piezoelectric and dielectric responses, which can potentially be exploited for piezoelectric applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Structural and electronic changes in L⁢i 2 ⁢Ru⁢O 3 induced by lithium intercalation

Despite extensive research on oxide battery cathodes that transcend classical cationic redox activity, the detailed interplay between structural transformations and electronic redox processes remains insufficiently understood. We report a detailed study of the sequential structural and electronic changes in Li 2 RuO 3 upon lithium intercalation, characterized by powder x-ray and neutron diffraction alongside Ru and O K-edge x-ray absorption spectroscopy (XAS), and guided by operando synchrotron x-ray diffraction. During delithiation, Li 2 RuO 3 evolves from a well-defined monoclinic state to a complex trigonal phase via multiple intermediate structures, marked by significant changes in Ru-O bond distances that closely track the transition from a classical cationic redox to an unconventional process centered at oxygen states. Armed with high-quality atomic structural descriptions, computational models of the O K-edge XAS closely reproduce the experimentally observed spectral shifts. Lastly, we relate observations of electrochemical hysteresis with concurrent changes in the pathways of structural and electronic transitions. In conclusion, our results not only clarify the mechanisms underpinning voltage hysteresis in a model for lattice oxygen redox but also underscore the importance of structural fidelity in modeling redox behavior when this type of complex reactivity is present.

Li, Haifeng [Univ. of Illinois, Chicago, IL (Unite↗
DOE OSTI2025

Business Models for Scaling Demand Flexibility Volume IV – Program life cycle challenges and lessons learned from U.S. programs

Load growth at the grid edge is driving increased attention to the distribution system and its ability to enable customer technology adoption in an affordable and timely manner. Key industry stakeholders, including electric utilities and regulators, can benefit from strategies to manage and balance customer needs with infrastructure investments, such as demand flexibility. This report focuses on demand flexibility—the ability to reduce, shift, shed, generate, or modulate loads in response to building and grid needs—to reduce the need for costly grid upgrades by deferring investment needs and increase system reliability by shifting electricity usage during periods of high risk. Specifically, we focus on the emerging characteristics of business models for demand flexibility as a framework to understand how demand flexibility programs generate value. In this report, we focus on the life cycle of demand flexibility programs, which provides information on value creation and describes the various deployment phases program implementers navigate from initial program conceptualization through to program expansion and replication to new customer segments and regions. This report characterizes the key phases of the demand flexibility program life cycle, identifies existing challenges across the program deployment phases, and describes lessons learned. This report is part of a series that includes reports on customer relationship management strategies, stakeholder ecosystem management, and program life cycle.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Learned implicit representations of aerosol chemistry and physics for enhancing the predictability of water cycle extreme events

Focal Area(s): Focal area 2: Predictive modeling through the use of AI-derived model components; and Focal area 3: physics-guided AI. Science Challenge: Comprehensive models of many geophysical processes require a large number of state variables, disqualifying them for inclusion in Earth System Models (ESMs) for the foreseeable future. This white paper proposes the paradigm shift from the use of state variables representing explicit physical quantities to the use of machine-learning to create and integrate a compact, implicit representation of a physical system with a smaller number of state variables. As an initial application, we propose to create parsimonious machine-learned surrogate models of gas- and aerosol-phase chemistry and physics with the purpose of improving the accuracy of the representation of cloud formation and cloud-aerosol interaction in the E3SM model. This type of improved representation of cloud microphysics is critical for enhancing the predictability of water cycle extremes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Time-Domain Nuclear Magnetic Resonance Determination of Wettability Alteration: Analysis for Low-Salinity Water

Wettability has been shown to influence oil recovery. This property has become central to low-salinity (LSW) and smart (SWF) water flooding recovery mechanisms research. The challenge lies in the fact that oil recovery results from the combined effects of solid-liquid and liquid-liquid interactions. This demands methods that allow an independent interpretation of wettability alteration contributions. The primary objective of this work is to assess changes in wettability through the application of Time-Domain Nuclear Magnetic Resonance (TD-NMR) T 2 distribution and diffusion coefficient, starting with a well-controlled porous system, that is, glass beads, and then a model rock (Berea), in the presence of one phase, either oil or brine exclusively. Subsequently, two-phase fluid saturation was tested. For the glass beads, dimethyldichlorosilane was used to induce a hydrophobic response, as confirmed by contact angle experiments on slides of the same material. Sodium sulfate was used for its known positive influence on oil recovery during LSW and SWF. In cases where alteration of surface properties was expected, a leftward shift of the average T 2 distribution curve modes, accompanied by a reduction on the diffusion coefficient during the aging process was observed. The results of this work confirm that fluid-solid interactions during LSW and SWF, namely a shift in wettability, take place after the injection of low-salinity water.

42 ENGINEERING↗
DOE OSTI2026

Recent progress in atomic-scale controlled plasma processing

Atomic-scale control in plasma processing is becoming increasingly critical for fabricating of advanced semiconductor devices, particularly as the industry shifts toward three-dimensional (3D) architectures and high-aspect-ratio (HAR) structures. This review presents a comprehensive overview of recent developments in atomic-scale controlled plasma processes, organized along two key directions: the hierarchical structure of plasma–surface interactions and the generational evolution of atomic layer processing (ALP) technologies. We examined the gas phase, where molecular design enables selective generation of ions and radicals; the boundary layer, where transport phenomena govern species delivery into nanoscale features, and the surface, where temperature-dependent reactions and cyclic processing determine etching selectivity and precision. Building on this foundation, we outline five generations of ALP—from thermal atomic layer deposition to transport-aware, temporally and structurally decoupled processes—highlighting the increasing sophistication of process control. The review further explores the transition from empirical recipe development to science-based, data-driven methodologies. By integrating quantum-chemical modeling, advanced diagnostics, and machine learning, we demonstrated how predictive models can link plasma species composition to process outcomes, enabling autonomous and adaptive control strategies. Finally, this review discusses the broader societal implications of plasma process innovation through the E4 quartet: energy and resource efficiency, environmental sustainability, evolutionary advancement, and educational promotion. These principles guide the development of sustainable and intelligent atomic-scale manufacturing technologies that are not only technically advanced but also socially responsible.

Ishikawa, Kenji [Nagoya Univ. (Japan)] (ORCID:0000↗
DOE OSTI2024

Enhancing f -Element Separations with ADAAM-EH: The Impact of Phase Modifiers and a DGA Aqueous Complexant

Recent investigations have used a 2-ethylhexyl diamide amine (ADAAM-EH) for Am/Cm separations in combination with N,N,N ',N '-tetraethyldiglycolamide as an aqueous complexant to achieve an unprecedented separation factor of 41. The aim of this research effort is to understand the speciation of trivalent lanthanide (Ln) and actinide (An) ions in the organic phase of an ADAAM-EH extraction system, both with and without phase modifiers (PM) (1-octanol and tri-n-butyl phosphate (TBP)). Leveraging spectroscopic techniques in combination with distribution ratio measurements provides an understanding of organic phase f-element ligand complexation. In the absence of PM, Ln is extracted in a stoichiometric 1:1 [M(ADAAM-EH) 1 (NO 3 ) x (H 2 O) 1 ](NO 3 ) 3-x complex. The addition of 1-octanol at 20 vol % results in multiple species present. One of the species is the same as the no PM case, and the other species results in an increased -OH coordination to the inner sphere, potentially displacing some NO 3 . In the case of TBP, increasing concentration results in additional red-shifted bands in the UV-visible spectra, suggesting the complexation of additional ligands of either ADAAM-EH or TBP. Finally, the new system knowledge obtained by and spectroscopic experiments will provide benchmarking information for computational studies of the inner- and outer-sphere coordination environments of f-element cations and insights into ADAAM-EH adduct formation with PM, like 1-octanol and TBP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Reversible Phase Transitions Enable Cyclic Isothermal CO 2 Capture in Redox‐Activated Perovskite‐Structured Sorbents

Sorption‐enhanced steam reforming and gasification using CO 2 sorbents enable the production of H 2 ‐rich syngas from carbonaceous feedstocks but are limited by significant temperature swings and sintering‐induced activity loss. Perovskite‐structured oxides are presented herein as sintering‐resistant, redox‐activated isothermal CO 2 sorbents capable of overcoming these challenges by releasing lattice oxygen to partially oxidize the carbonaceous feedstock while capturing CO 2 , shifting equilibrium toward H 2 production. Building on this, the structural and thermodynamic impact of Fe doping on the CO 2 sorption properties of SrMn 1‐ x Fe x O 3‐ δ is investigated for sorption‐enhanced reforming. Experimental results demonstrate that these sorbents enable isothermal production of high‐quality, H 2 ‐enriched syngas from carbonaceous feedstocks. Laboratory and synchrotron‐based powder X‐ray diffraction analyses, coupled with density functional theory calculations, reveal the structural dynamics and energy landscape of the SrMn 1‐ x Fe x O 3‐ δ perovskite system under reaction conditions, elucidating the solid‐state reaction pathway and the effect of Fe doping on the extent of carbonation.

CO2 capture↗