Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase change”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Simulation of radiation damage via alpha decay in BFS:PC grouts using 4 He 2+ ion acceleration

The impact of alpha radiation on cements used to encapsulate intermediate-level waste (ILW) is not well understood. ILW wastes can contain high levels of alpha-emitting radionuclides, meaning that the grouts used to encapsulate them are exposed to significant ionising radiation. Thus, a damaged region could develop in the grout adjacent to the alpha-emitting species. This work attempted to recreate this behaviour through nonradioactive 4 He 2+ ion-accelerator experiments, which have not previously been applied to common encapsulation grouts. The influence of this irradiation on a slag-Portland cement was investigated at different ages via transmission electron microscopy energy-dispersive x-ray spectroscopy (TEM-EDX) and supporting techniques, to assess whether 4 He 2+ irradiation caused textural or chemical zonation. No significant changes in hydrate phases or textures were observed, other than minor variations associated with carbonation. This paper provides a proof of concept for using ion acceleration techniques on cements and furthers knowledge on their radiation response.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Epitaxial growth mechanism of heterogeneous catalytic oxidation of Mn(II) on manganite under oxic conditions

Manganese oxides are ubiquitous in soils and sediments, and their formation and transformation processes affect the migration and transformation of heavy metals and organic pollutants. Most previous work has been focused the oxidation of Mn(II) on Mn(IV) oxide surface, but it remains poorly understood how Mn(II) interacts with manganite under oxic conditions. Here, the interactions between manganite and dissolved Mn(II) within pH 5.0–9.0 under oxic conditions were systematically studied. The results indicated that adsorbed Mn(II) was directly oxidized to manganite on the surface, and the oxidation rate increased with increasing pH and oxygen partial pressure. Electrons are likely transferred in bulk manganite during the oxidation process of Mn(II). Although manganite induced Mn(II) oxidation and the epitaxial growth of bulk particles, there was no obvious change in mineral phase. Dissolved oxygen accelerated the growth of manganite in Mn(II) solution. Compared with the absence of manganite, the presence of manganite inhibited the formation of hausmannite from Mn(II) oxidation by oxygen in air. Furthermore, this study reveals the catalytic oxidation process and mechanism of Mn(II) on manganite surface, and improves the understanding of manganite crystal growth in supergene environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

In tube condensation of low global warming potential refrigerants in an axial micro-fin aluminum tube

Environmental regulations have driven the development of refrigerants with low global warming potential (GWP). To design heat exchangers using these new refrigerants, data are needed concerning the heat transfer coefficient and pressure drop in two-phase flow. Another change is the increasing use of aluminum tubes rather than copper tubes to reduce heat exchanger cost. Hence, this study presents an experimental investigation of flow condensation using an expanded axial micro-fin aluminum tube with a fin-tip diameter of 5.96 mm. Here, the experiments included single compounds R-32, R-1234yf, and R-1234ze(E), zeotropic mixtures with low glide (R-454B), and zeotropic mixtures with high-glide (R-454C and R-455A). Experiments were conducted at condensation temperatures ranging from 40 °C to 50 °C, reduced pressures ranging from 0.21 to 0.55, and mass fluxes ranging from 150 to 350 kg/(m 2 s). Data obtained for these refrigerants constitute one of the first reports for high-glide refrigerants using axial micro-fin aluminum tubes. An evaluation of heat transfer degradation of zeotropic mixtures due to mass transfer resistance at the liquid/vapor interface is presented. This information can be used to design heat exchangers for next generation air conditioning and refrigeration systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

α-U and ω-UZr 2 in neutron irradiated U-10Zr annular metallic fuel

Here, to develop metallic fuel with ultra-high burnup of 30%-40%, an annular U-10Zr fuel with 55% smear density was fabricated through a casting route and irradiated at the Advanced Test Reactor at Idaho National Laboratory. The annular fuel design also serves as a demonstration of the feasibility to replace sodium bond with a helium bond to benefit the geological disposal of irradiated fuel, cut the cost of fuel fabrication, and boost the overall metallic fuel economy. This paper reports the results from transmission electron microscopy (TEM) based post-irradiation examination of this fuel type irradiated to a burnup of 3.3% fissions per initial heave metal atoms for initial screening purpose. After irradiation, the initial U-10Zr separated into an a-U annular region and an UZr 2+x center region with nanoscale spinodal decomposed microstructure. Because of the provided large amount of coherent interface areas, the fission gas atoms and vacancies generated in UZr 2+x phase are possibly pinned at the interface areas, leading to 20 times smaller fission gas bubbles than those in the neighboring a-U. The large bubbles in a-U become connected and merged into large pores that provide fast release paths for fission gas which prevents further fuel swelling. The fuel center still has open space to accommodate further fuel swelling from solid fission products at higher burnup. Other neutron irradiation induced phase and microstructure change are also characterized and compared with traditional solid fuel designs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Photoacoustic 3-D imaging of polycrystalline microstructure improved with transverse acoustic waves

Non-invasive fast imaging of grain microstructure of polycrystalline ceria with sub-micrometric spatial resolution is performed via time-domain Brillouin scattering. The propagation of a nanoacoustic pulse is monitored down to 8 µm deep in a 30 × 30 µm2 area. Grains boundaries are reconstructed in three-dimensions via a twostep processing method, relying on the wavelet synchro-squeezed transform and the alpha shape algorithm. Imaging contrast is improved by taking advantage of stronger sensitivity to anisotropy of transverse acoustic waves, compared with longitudinal waves. Utilization of transverse waves in the image processing reveals additional boundaries that are not discerned using longitudinal waves, confirmed by an electron backscattering diffraction pattern. A buried inclined interface between differently oriented grains is identified by monitoring changes in amplitude (phase) of the portion of the signal associated with transverse (longitudinal) waves. Estimates of the inclination angle of this interface prove the sensitivity of our laser ultrasonic method to image inclined boundaries.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Enhanced Photostability of “Hollow” Mixed Halide Wide-Bandgap Perovskite Films

We investigated the role of hollow perovskite architectures in enhancing the photostability of mixed halide wide-bandgap perovskites. We focused on mitigating photoluminescence (PL) peak shifts caused by phase segregation when exposed to light. By analyzing the optical and structural properties of mixed bromide/iodide hollow perovskite thin films, we observed that the incorporation of hollow structures reduced the ionic conductivity in the films, leading to improved photostability compared to non-hollow perovskite samples. The mixed halide hollow perovskite thin films exhibited increased the bandgap. High-power laser irradiation was used to induce phase segregation, and changes in the PL emission spectra were measured as a function of irradiation time. The mixed halide hollow perovskite thin films exhibited reduced PL peak shifts compared to the control samples. The inclusion of enI 2 (en = ethylenediamine) resulted in a reduction in the overall ionic conductivity of the films and a lower trap density. Hollow perovskite films incorporated in solar cells indicated that while the initial efficiency of the solar cells decreased with increasing enI 2 concentration, the open-circuit voltage value increased, potentially due to the slight enhancement of the band gap. Furthermore, the findings highlight the potential of hollow perovskite architectures in enhancing the photostability of mixed halide perovskites

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Exploring the mobility of Cu in bimetallic nanocrystals to promote atomic-scale transformations under a reactive gas environment

Bimetallic nanocrystals (NCs) often show improved catalytic activities compared to their monometallic counterparts, but to optimize the performance it is crucial to understand how they behave under actual reaction conditions, i.e. in gas environments. Here, in this study, we use powder X-ray diffraction (PXRD), total scattering (TS) with pair distribution function (PDF) analysis and in situ high-resolution transmission electron microscopy (HR-TEM) to provide new insights into the atomic-scale behaviour of NC catalysts under a reactive gas environment. By investigating Au, Cu, Pd, PdCu, AuPd and AuCu NCs, we observe that the properties of bimetallic NCs differ significantly from their monometallic counterparts. While metal oxide phases formed for monometallic Pd and Cu under O 2 -exposure, bimetallic PdCu and AuCu NCs showed loss of metallic Cu in the crystalline phases after exposure to O 2 . However, upon introducing the bimetallic NCs to a reducing atmosphere, the Cu was found to reappear and reincorporate into a crystalline phase, forming the initial bimetallic structures. By combining TS, PDF analysis and in situ HR-TEM, we saw that Cu segregates to the NC surfaces or forms small CuO domains under O 2 -exposure. Our results thus indicate that the Cu mobility promotes segregation and formation of CuO along with the formation of a monometallic phase, which ultimately changes the resulting active surface sites of the nanocatalyst. Understanding the dynamical structure–property relations of nanocatalysts is key to enable rational design of efficient and robust catalysts for controlled catalytic reactions.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Managing hysteresis of Gd 5 Si 2 Ge 2 by magnetic field cycling

The influence of magnetic field cycling through the first-order magnetostructural transformation on the magnetic and magnetocaloric properties, as well as hysteresis of polycrystalline Gd 5 Si 2 Ge 2 , has been studied using magnetometry. Here, the cycling has a minimal effect on the magnetic field-induced entropy change and the phase transformation temperature of the material. On the other hand, magnetic hysteresis decreases by 30% after approximately ten cycles and remains low unless the sample is moved far into the paramagnetic regime. Factors playing a role in the history dependence of hysteresis have been discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Scaling laser preheat for MagLIF with the Z-Beamlet laser

Optimizing the performance of the Magnetized Liner Inertial Fusion (MagLIF) platform on the Z pulsed power facility requires coupling greater than 2 kJ of preheat energy to an underdense fuel in the presence of an applied axial magnetic field ranging from 10 to 30 T. Achieving the suggested optimal preheat energies has not been experimentally achieved so far. In this work, we explore the preheat design space for cryogenically cooled MagLIF targets, which represent a viable candidate for increasing preheat energies. Using 2D and 3D HYDRA MHD simulations, we first discuss the various physical effects that occur during laser preheat, such as laser energy deposition, self-focusing, and filamentation. After identifying the changes that different phase plates, gas-fill densities, and magnetic fields bring to the aforementioned physical effects, we, then, consider higher laser energies that are achievable with modest upgrades to the Z Beamlet laser. Lastly, with a 6.0-kJ upgraded laser, 3D calculations suggest that it is possible to deliver 4.25 kJ into the MagLIF fuel, resulting in an expected deuterium neutron yield of Y DD ≃ 1.5 × 10 14 , or roughly 50 kJ of DT equivalent yield, at 20-MA current drive. This represents a 10-fold increase in the currently achieved yields for MagLIF.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Light scattering by V 4 O 7 film across the metal–insulator transition

The experimental study of the angle-resolved hemispherical light scattering by V 4 O 7 film within a broad temperature range across metal–insulator transition reveals complex structural reorganization of the film deposited on the c-cut sapphire crystal. The bidirectional scattering distribution function and the surface autocorrelation function were obtained from scattering data to visualize statistics of the spatially resolved contributions of optical inhomogeneities in normal and lateral directions to the surface. The measurements reveal an anisotropic surface roughness distribution due to the twinned domain structure, with significant anisotropy changes across the phase transition. The V 4 O 7 film deposited on sapphire leads to a polydomain structure, minimizing elastic strain energy with distinct multiscale distributions of surface domains. Near T c , the material shows the lowest roughness but the highest lateral disorder of the surface.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Reversible plasmonic switching in a graphene nanoresonator loaded with a core – shell quantum dot

A model of an all-plasmonic switch based on a graphene waveguide integrated with a stub nanoresonator loaded with a quantum dot is considered. Using the full-wave numerical simulation, it is shown that successive on/off switching of the control surface plasmon – polariton wave at the input of the waveguide leads to a change in the phase of the signal plasmon – polariton wave in the nanoresonator by π. This causes reversible switching of the device operation regime – from almost complete blocking to stable transmission of the signal plasmon – polariton wave through the waveguide. The effect is implemented at rates of ∼0.5 THz for infrared electromagnetic waves localised in a device with a switching region of 40 × 20 nm. (paper)

36 MATERIALS SCIENCE↗
DOE OSTI2020

Mapping the structural, magnetic and electronic behavior of (Eu 1-x Ca x ) 2 Ir 2 O 7 across a metal-insulator transition

In this study, we employ bulk electronic properties characterization and x-ray scattering/spectroscopy techniques to map the structural, magnetic and electronic properties of (Eu 1-x Ca x ) 2 Ir 2 O 7 as a function of Ca-doping. As expected, the metal-insulator transition temperature, T-MIT, decreases with Ca-doping until a metallic state is realized down to 2 K. In contrast, T-AFM becomes decoupled from the MIT and (likely short-range) AFM order persists into the metallic regime. This decoupling is understood as a result of the onset of an electronically phase separated state, the occurrence of which seemingly depends on both synthesis method and rare earth site magnetism. PDF analysis suggests that electronic phase separation occurs without accompanying chemical phase segregation or changes in the short-range crystallographic symmetry while synchrotron x-ray diffraction confirms that there is no change in the long-range crystallographic symmetry. X-ray absorption measurements confirm the $J_{eff}$ = 1/2 character of (Eu 1-x Ca x ) 2 Ir 2 O 7 . Surprisingly these measurements also indicate a net electron doping, rather than the expected hole doping, indicating a compensatory mechanism. Lastly, XMCD measurements show a weak Ir magnetic polarization that is largely unaffected by Ca-doping. Keywords: term, term, term.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

A test of gravity with Pulsar Timing Arrays

Abstract A successful measurement of the Stochastic Gravitational Wave Background (SGWB) in Pulsar Timing Arrays (PTAs) would open up a new window through which to test the predictions of General Relativity (GR). We consider how these measurements might reveal deviations from GR by studying the overlap reduction function — the quantity that in GR is approximated by the Hellings-Downs curve — in some sample modifications of gravity, focusing on the generic prediction of a modified dispersion relation for gravitational waves. We find a distinct signature of such modifications to GR — a shift in the minimum angle of the angular distribution — and demonstrate that this shift is quantitatively sensitive to any change in the phase velocity. In a given modification of gravity, this result can be used, in some regions of parameter space, to distinguish the effect of a modified dispersion relation from that due to the presence of extra polarization modes.

Astronomy & Astrophysics↗
DOE OSTI2022

Experimental investigation of beam-ion losses induced by magnetic perturbations using the light ion beam probe technique in the ASDEX Upgrade tokamak

The impact of externally applied magnetic perturbations (MPs) on fast-ion losses has been investigated by means of the light ion beam probe (LIBP) technique in the ASDEX Upgrade tokamak. The LIBP technique allows to experimentally infer the fast-ion orbit displacement induced by MPs via first-orbit losses using scintillator based fast-ion loss detector (FILD) measurements. The fast-ion orbit displacement against different applied MP spectra has been studied. These shots were conducted in ELM mitigated H-mode plasmas. A rigid rotation of the MP coils was applied with a frequency of 1 Hz, with an n = 2 configuration and changing the differential phase between the upper and lower set of coils (ΔΦ ul ) on a shot-to-shot basis. Beam sources Q7 (tangential) and Q8 (radial) were used to probe different fast-ion orbits with FILD1. The measured fast-ion orbit displacement ranges from 3 to 20 mm approximately, and no qualitative difference is observed between ions from beam sources Q7 and Q8. The minimum is found for a ΔΦ ul ~ 50°, which is shifted with respect to the minimum of the plasma boundary displacement, found at ΔΦ ul ~ 0°. A first attempt to validate the orbit following code ASCOT—including the plasma response calculated with the MARS-F code—against these experimental measurements is performed. Finally, while the dependence of the first-orbit fast-ion displacement with ΔΦ ul does not match the experimental measurements, these simulations do capture other features such as the order of magnitude of the orbit displacement and the importance of the toroidal spectrum of the applied perturbation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Second-Phase Hepatitis C Plasma Viral Kinetics Directly Reflects Reduced Intrahepatic Burden of Hepatitis C Virus

Mathematical models explain how antivirals control viral infections. Hepatitis C virus (HCV) treatment results in at least 2 phases of decline in viremia. Here, the first phase reflects clearance of rapidly produced virions. The second phase is hypothesized to derive from loss of infected cells but has been challenging to prove. Using single-cell methods, we quantified the number of hepatitis C virus (HCV)-infected hepatocytes in liver biopsies taken before and within 7 days of initiating direct-acting antivirals (DAAs) in a double-blinded randomized controlled trial testing 2 (sofosbuvir-velpatasvir) versus 3 (sofosbuvir-velpatasvir-voxilaprevir) DAAs. We employed thousands of intrahepatic measurements in 10 persons with chronic genotype 1a HCV infection: median proportion of infected hepatocytes declined from 11.3% (range, 1.3%–59%) to 0.6% (range, <0.3%–5.8%), a loss of 75%–95% infected hepatocytes. Plasma viremia correlated with numbers of HCV-infected hepatocytes (r = 0.77; P < .0001). Second-phase plasma dynamics and changes in infected hepatocytes were indistinct (P = .16), demonstrating that second-phase viral dynamics derive from loss of infected cells. DAAs led to a decline in intracellular HCV RNA and interferon-stimulated gene expression (P < .05 for both). We proved that second-phase viral dynamics reflect decay of intrahepatic burden of HCV, partly due to clearance of HCV RNA from hepatocytes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

SILCC – VII. Gas kinematics and multiphase outflows of the simulated ISM at high gas surface densities

ABSTRACT We present magnetohydrodynamic (MHD) simulations of the star-forming multiphase interstellar medium (ISM) in stratified galactic patches with gas surface densities Σgas = 10, 30, 50, and 100 $\mathrm{M_\odot \, pc^{-2}}$. The silcc project simulation framework accounts for non-equilibrium thermal and chemical processes in the warm and cold ISM. The sink-based star formation and feedback model includes stellar winds, hydrogen-ionizing UV radiation, core-collapse supernovae, and cosmic ray (CR) injection and diffusion. The simulations follow the observed relation between Σgas and the star formation rate surface density ΣSFR. CRs qualitatively change the outflow phase structure. Without CRs, the outflows transition from a two-phase (warm and hot at 1 kpc) to a single-phase (hot at 2 kpc) structure. With CRs, the outflow always has three phases (cold, warm, and hot), dominated in mass by the warm phase. The impact of CRs on mass loading decreases for higher Σgas and the mass loading factors of the CR-supported outflows are of order unity independent of ΣSFR. Similar to observations, vertical velocity dispersions of the warm ionized medium (WIM) and the cold neutral medium (CNM) correlate with the star formation rate as $\sigma _\mathrm{z} \propto \Sigma _\mathrm{SFR}^a$, with a ∼ 0.20. In the absence of stellar feedback, we find no correlation. The velocity dispersion of the WIM is a factor ∼2.2 higher than that of the CNM, in agreement with local observations. For $\Sigma _\mathrm{SFR} \gtrsim 1.5 \times 10^{-2}\, \mathrm{M}_\odot \, \mathrm{yr}^{-1}\, \mathrm{kpc}^{-2}$ the WIM motions become supersonic.

Astronomy & Astrophysics↗
DOE OSTI2020

Scaling behavior of low-temperature orthorhombic domains in the prototypical high-temperature superconductor La 1.875 Ba 0.125 CuO 4

Structural symmetry breaking and recovery in condensed-matter systems are closely related to exotic physical properties such as superconductivity (SC), magnetism, spin density waves, and charge density waves (CDWs). The interplay between different order parameters is intricate and often subject to intense debate, as in the case of CDW order and superconductivity. In La 1.875 Ba 0.125 CuO 4 (LBCO), the low-temperature structural domain walls are hypothesized as nanometer-scale pinning sites for the CDWs. Coherent x-ray diffraction techniques have been employed here to visualize the domain structures associated with these symmetry changes directly during phase transition. We have pushed Bragg coherent diffractive imaging (BCDI) into the cryogenic regime where most phase transitions in quantum materials reside. Utilizing BCDI, we image the structural evolution of LBCO microcrystal samples during the high-temperature tetragonal to low-temperature orthorhombic (LTO) phase transition. Our results show the formation of LTO domains close to the transition temperature and how the domain size decreases with temperature. In conclusion, the number of domains follows the secondary order parameter (or orthorhombic strain) measurement with a critical exponent that is consistent with the three-dimensional universality class.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Proton Bunch Self-Modulation in Plasma with Density Gradient

We study experimentally the effect of linear plasma density gradients on the self-modulation of a 400 GeV proton bunch. Results show that a positive or negative gradient increases or decreases the number of microbunches and the relative charge per microbunch observed after 10 m of plasma. The measured modulation frequency also increases or decreases. With the largest positive gradient we observe two frequencies in the modulation power spectrum. Results are consistent with changes in wakefields’ phase velocity due to plasma density gradients adding to the slow wakefields’ phase velocity during self-modulation growth predicted by linear theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗