Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase Stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Enhancing SRF cavity stability and minimizing detuning with data-driven resonance control based on dynamic mode decomposition

Effective resonance control of superconducting radio frequency (SRF) cavities is critical for large machines like LCLS-II, as failure to achieve proper control can result in increased RF power consumption, higher cryogenic heat loads, and increased costs. To address this challenge, we have developed a machine learning (ML) model based on the dynamic mode decomposition method to represent the forced cavity dynamics. Using this model, we designed a model predictive controller (MPC) and demonstrated through simulation that the MPC can effectively stabilize the amplitude and phase of SRF cavities using only a frequency actuator, even in the presence of multiple mechanical modes. The lightweight and explicit ML model makes the controller suitable for direct implementation on field-programmable gate arrays, unlocking the full potential of SRF linacs like LCLS-II, enabling higher beam power and energy, and also serving as an advanced motion controller for various applications, such as photon beamlines and storage rings.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Scale-dependent tipping points of bacterial colonization resistance

The commonly observed stability of natural microbiomes is important for their function, yet the ubiquity of microbiome stability remains enigmatic. The strongest form of stability, colonization resistance, protects residents against invaders and is often associated with specific porous structures, such as skin follicles or intestinal crypts. By systematically probing the colonization of fly gut–derived bacteria in microfluidic pores of varying sizes, we revealed that colonization patterns and invasion rates strongly depend on the pore size. Mathematical modeling shows that bacteria spontaneously tend to organize into a dense colonization-resistant state in pores exceeding a critical size. The scale dependence of stability and resilience could bias ecological filtering in microbiomes and should be considered in the design of microbial ecology experiments.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

3D pattern formation of a protein–membrane suspension

Many essential cellular processes, including cell division and the establishment of cell polarity during embryogenesis, are regulated by pattern-forming proteins. These proteins often need to bind to a substrate, such as the cell membrane, onto which they interact and form two-dimensional (2D) patterns. It is unclear how the membrane’s continuity and dimensionality impact pattern formation. Here, we address this gap using the MinDE system, a prototypical example of pattern-forming membrane proteins. We show that when the lipid substrate is fragmented into submicrometer-sized diffusive liposomes, adenosine triphosphate-driven protein–protein interactions generate three-dimensional (3D) spatially extended patterns, despite the complete loss of membrane continuity. Remarkably, these 3D patterns emerge at scales four orders of magnitude larger than the individual liposomes. By systematically varying protein concentration, liposome size, and density, we observed and characterized a variety of 3D dynamical patterns not seen on continuous 2D membranes, including traveling waves, dynamical spirals, and a coexistence phase. Simulations and linear stability analysis of a coarse-grained model revealed that the physical properties of the dispersed membrane effectively rescale both the protein–membrane binding rates and diffusion, two key parameters governing pattern formation and wavelength selection. These findings highlight the robustness of Min’s pattern-forming ability, suggesting that protein–membrane suspensions could serve as an adaptable template for studying out-of-equilibrium self-organization in 3D, beyond in vivo contexts.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Significance of the structural configuration of B2 disorder in Co and Ti based Heusler alloys

We investigate here structural (at local and global levels) and transport properties for 𝑋 2 ⁢MnAl (𝑋= Co and Ti). Additionally, the magnetic properties were also studied for Ti 2 ⁢MnAl. Our x-ray diffraction results show that both the compounds stabilize in B2 disordered phase with cubic structure of 𝑃⁢𝑚⁢$\overline{3}$⁢𝑚 space group. Further, the structural configuration of the above disordered phase for both the compounds was identified using combined studies of x-ray absorption spectroscopy and multiple scattering calculations at the transition metal 𝐾 edges. Upon such identification, in the case of Co 2 ⁢Mn 1−𝑦⁢ Cr 𝑦 ⁢Al (𝑦= 0, 0.05, 0.1, 0.2) with change in 𝑦, we are able to establish a better connection quantitatively between the inverse of Mn-Co bonds and peak in the temperature-dependent resistivity. This highlights the crucial importance of a detailed understanding of the nature of B2 disorder. In the case of 𝑦=0, in the temperature range of study, the resistivity is driven by the functional form associated with (a) three-dimensional enhanced electron-electron Coulomb interaction scattering mechanism and (b) an unconventional one-magnon process. For Ti 2 ⁢MnAl, the transport shows metallic glasslike behavior at high temperature, while at low temperature it follows both the Cote-Meisel's model and quantum correction model. In this compound, the magnetic studies suggest the formation of superparamagnetic clusters in the paramagnetic matrix at low temperatures. Our density functional theory results are in line with the transport and magnetic properties. In literature, the spin polarization percentage (𝑃) for 𝑋= Co in B2 disordered phase is 76%. However, the present results emphasize the fact that in B2 disordered phase, the value of 𝑃 can range from 90% to 71% depending on the structural configuration introduced by swapping of the atomic positions of Mn and Al. For the compound under study, the value of percentage spin polarization obtained ranges between 82% to 85%. In addition, we also identify the origin of the difference in the shape of the Mn 3⁢𝑑 density of states for both the alloys. In conclusion, our results for 𝑋= Co alloy highlights the importance of identifying the specific structural configuration associated with a particular disorder category especially in the estimation of 𝑇 𝑐 and 𝑃 and for 𝑋= Ti, the physical properties can be tuned by varying the position of 𝐸 𝐹 and thereby its utilization in device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Charge-induced phase transition in encapsulated $\mathrm{HfTe_2}$ nanoribbons

Nanotube encapsulation is a powerful technique for coaxing solids into unconventional configurations. By synthesizing materials within the interior confines of hollow nanotubes, lower dimensional morphologies, such as one-dimensional chains or nanoribbons, are favored. We have used carbon nanotube encapsulation to realize ultranarrow, atomically precise HfTe 2 nanoribbons. A local, electron-beam-stimulated transition from the metallic 1T phase to the previously unreported semiconducting 1H phase is observed. Here, we study computationally how charging can drive the phase transition and the stability of the different atomic configurations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Intrinsic Limits of Charge Carrier Mobilities in Layered Halide Perovskites

Layered halide perovskites have emerged as potential alternatives to three-dimensional (3D) halide perovskites due to their improved stability and larger material phase space, allowing fine tuning of structural, electronic, and optical properties. However, their charge carrier mobilities are significantly smaller than those of 3D halide perovskites, which has a considerable impact on their application in optoelectronic devices. Here, we employ state-of-the-art approaches to unveil the electron-phonon mechanisms responsible for the diminished transport properties of layered halide perovskites. Starting from a prototypical A M X 3 halide perovskite, we model the case of n = 1 and n = 2 layered structures and compare their electronic and transport properties to the 3D reference. The electronic and phononic properties are investigated within density functional theory (DFT) and density functional perturbation theory (DFPT), while transport properties are obtained via the Boltzmann transport equation. The vibrational modes contributing to charge carrier scattering are investigated and associated with polar-phonon scattering mechanisms arising from the long-range Fröhlich coupling and deformation-potential scattering processes. Our investigation reveals that the lower mobilities in layered systems primarily originate from the increased electronic density of states at the vicinity of the band edges, while the electron-phonon coupling strength remains similar. Such an increase is caused by the dimensionality reduction and the break in octahedra connectivity along the stacking direction. Our findings provide a fundamental understanding of the electron-phonon coupling mechanisms in layered perovskites and highlight the intrinsic limitations of the charge carrier transport in these materials. Published by the American Physical Society 2024

Cucco, Bruno (ORCID:0000000331564143)↗
DOE OSTI2021

Many routes to ferroelectric HfO 2 : A review of current deposition methods

Although 10 years have passed since the initial report of ferroelectricity in hafnia (HfO 2 ), researchers are still intensely fascinated by this material system and the promise it holds for future applications. A wide variety of deposition methods have been deployed to create ferroelectric HfO 2 thin films such as atomic layer deposition, chemical solution deposition, and physical vapor deposition methods such as sputtering and pulsed laser deposition. Process and design parameters such as deposition temperature, precursor choice, target source, vacuum level, reactive gases, substrate strain, and many others are often integral in stabilizing the polar orthorhombic phase and ferroelectricity. We examine processing parameters across four main different deposition methods and their effect on film microstructure, phase evolution, defect concentration, and resultant electrical properties. The goal of this review is to integrate the process knowledge collected over the past 10 years in the field of ferroelectric HfO 2 into a single comprehensive guide for the design of future HfO 2 -based ferroelectric materials and devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

NH 4 OH Looping with Membrane CO 2 Absorber and Distributed Stripper for Enhanced Algae Growth

The University of Kentucky Center for Applied Energy (UK CAER) has devised a unique, integrated CO2 capture and utilization technology. CO2 from coal-fired power generation flue gas is first captured at half the operating cost of a typical aqueous CO2 capture system (CCS), distributed in an aqueous stream and then fixed by algae in bioreactors where the algae production is increased by 50% over that with a typical intermittent nutrient feeding system. Lower CCS operating cost is achieved by eliminating the flue gas pretreatment step for cooling and SO2 removal, eliminating steam extraction from the power generation steam cycle for solvent regeneration, and eliminating CO2 compression. Higher algae production is achieved by continuous, just-in-time nutrient feed to the bioreactors directly from a distributed solvent regenerator, which maintains the bioreactor pH for optimum growth. The process starts with a uniquely configured membrane absorber, where the flue gas is indirectly contacted with an ammonium hydroxide (NH4OH) solvent. Dissolved NH3 is attractive for both CO2 capture and as an algae nutrient. For CO2 capture it is inexpensive, has a low regeneration energy, is thermally- and oxidatively-stable and has a viscosity near that of water, which makes is easy to transport. Numerous studies have shown that the scrubbing capacity of NH3 is approximately 0.9-1.2 kg of CO2/kg of NH3, with a CO2 removal efficiency of ~99% and half the solvent regeneration energy than that of 30 wt% MEA[1, 2, 3]. NH3 is attractive as an algae nutrient due to its low cost. The rich NH4OH solvent is pumped to a set of distributed regenerators which are co-located with the algae bioreactors. Solvent pumping, transport and distribution reduces the balance of plant (BOP) cost compared to a typical aqueous CCS related to the flue gas duct and boost fan required to transport the flue gas. The energy required for the distributed solvent regeneration is supplied by solar-thermal panels eliminating the need for steam extraction from the power generation steam cycle. After solvent regeneration, the product stream contains both the CO2 captured from the flue gas and volatized NH3 from the solvent. This product stream is fed directly to the bioreactors, eliminating the need for compression of the CO2 stream. The relative amounts of CO2 and NH3 in the product stream are adjusted and controlled by a controlling the regeneration conditions (pressure and temperature). The continuous feed of the right ratio of nutrients overcomes the typical inhibition of algae growth resulting from frequent pH swings in the bioreactor due to unbalanced (intermittent) feeding systems for CO2 and N. Also, because the regenerators will operate at pressure and be located in close proximity to the bioreactors, there is no worry about pressure drop when sparging the gas into the algae. Sparging produces small bubbles which is beneficial for mass transfer efficiency. One known challenge when using an NH4OH solvent is high NH3 emission. Hydrophobic membranes are used for CO2 capture using an aqueous NH3 solution[4, 5] without the direct contact between flue gas and aqueous solution. Additionally, UK CAER CO2 capture and utilization process manages NH3 slip in three extra measures. First, NH3 slip is minimized by working with minimal species partial pressure, which is proportional to the concentration in the liquid. Hence, lowering the capture solvent concentration will lower the NH3 partial pressure. Second, UK CAER’s previous work has demonstrated that the addition of Zn2+ into NH3 solutions to chelate the NH3 can reduce NH3 volatility. Third, the configuration of the membrane CO2 absorber utilizes condensed water from the flue gas to continually wash the gas-side of the membrane to reduce fouling and recapture NH3 slip. Additional details about the UK CAER unique, integrated CO2 capture and utilization technology will be presented along with technology development plans. Diao, N., Q. Li, and Z. Fang. 2004. Heat transfer in ground heat exchangers with groundwater advection. International Journal of Thermal Sciences. 43: 1203-1211, He, Q., M. Chen, L. Meng, K. Liu, and W. Pan. 2004. Study on Carbon Dioxide Removal from Flue Gas by Absorption of Aqueous Ammonia. Western Kentucky University. Yeh, A.C., and H. Bai. 1999. Comparison of ammonia and monoethanolamine solvents to reduce CO2 greenhouse gas emissions. The Science of the Total Environment. 228: 121-133, Villeneuve, K., D. Roizard, J.C. Remigy, M. Iacono, and S. Rode. 2018. CO2 capture by aqueous ammonia with hollow fiber membrane contactors: Gas phase reactions and performance stability. Separation and Purification Technology, 199: 189-197, Toro Molina, C., and C. Bouallou. 2016. Carbon dioxide absorption by ammonia intensified with membrane contactors. Clean Techn Environ Policy 18, 2133–2146 (2016)

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2025

Development of BPM Electronics for PIP-II at Fermilab

This paper presents the uTCA4.0-based BPM electronics for PIP-II, featuring four 250 MSPS ADCs and a Xilinx UltraScale+ MPSoC FPGA with 10 GbE uplink. Design elements include signal conditioning, clock, and thermal management. The FPGA performs signal processing, time tagging, digital down-conversion, and phase drift compensation. Position and phase resolution, and thermal stability is validated through dedicated testing.

Liu, Shengli [Fermilab] (ORCID:0009000128436936)↗
DOE OSTI2023

Understanding the Formation of Complex Phases: The Case of FeSi 2

One of the fundamental goals of materials science is to understand and predict the formation of complex phases. In this study, FeSi 2 is considered as an illustration of complex phase formation. Although Fe and Si both crystallize with a simple structure, namely, body-centered cubic (bcc A2) and diamond (A4) structures, respectively, it is rather intriguing to note the existence of two complex structures in the Si-rich part of the phase diagram around FeSi 2 : α-FeSi 2 at high temperatures (HT) with a slight iron-deficient structure and β-FeSi2 (also referred to as Fe 3 Si 7 ) at low temperatures (LT). We re-analyze the geometry of these two phases and rely on approximant phases that make the relationship between these two phases simple. To complete the analysis, we also introduce a surrogate of the C16 phase that is observed in FeGe 2 . We clearly identify the relationship that exists between these three approximant phases, corroborated by a ground-state analysis of the Ising model for describing ordering that takes place between the transition metal element and the “vacancies”. This work is further supported by ab initio electronic structure calculations based on density functional theory in order to investigate properties and transformation paths. Finally, extension to other alloys, including an entire class of alloys, is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Development of Antimicrobial PLA Composites for Fused Filament Fabrication

In addition to possessing the desirable properties of being a biodegradable and biocompatible polymer fabricated from renewable resources, poly (lactic acid) (PLA) has useful mechanical and thermal attributes that has enabled it to be one of the most widely-used plastics for medicine, manufacturing, and agriculture. Yet, PLA composites have not been heavily explored for use in 3D-printing applications, and the range of feasible materials for the technology is limited, which inhibits its potential growth and industry adoption. In this study, tunable, multifunctional antimicrobial PLA composite filaments for 3D-printing have been fabricated and tested via chemical, thermal, mechanical, and antimicrobial experiments. Thermally stable antimicrobial ceramics, ZnO and TiO2, were used as fillers up to 30 wt%, and poly (ethylene glycol) (PEG) was used as a plasticizer to tune the physical material properties. Results demonstrate that the PLA composite filaments exhibit the thermal phase behaviors and thermal stability suitable for 3D-printing. Additionally, PEG can be used to tune the mechanical properties while not affecting the antimicrobial efficacy that ZnO and TiO2 imbue.

TiO2↗
DOE OSTI2026

Synthesis of epitaxial TaO$_2$ thin films on Al$_2$O$_3$ by suboxide molecular-beam epitaxy and thermal laser epitaxy

Tantalum dioxide (TaO2) is a metastable tantalum compound. Here, we report the epitaxial stabilization of TaO2 on Al2O3 (1-102) (r-plane sapphire) substrates using suboxide molecular-beam epitaxy (MBE) and thermal laser epitaxy (TLE), demonstrating single-oriented, monodomain growth of anisotropically strained thin films. Microstructural investigation is performed using synchrotron X-ray diffraction and scanning transmission electron microscopy. The tetravalent oxidation state of tantalum is confirmed using X-ray absorption and photoemission spectroscopy as well as electron energy-loss spectroscopy. Optical properties are investigated via spectroscopic ellipsometry and reveal a 0.3 eV Mott gap of the tantalum 5d electrons. Density-functional theory and group theoretical arguments are used to evaluate the limited stability of the rutile phase and reveal the potential to unlock a hidden metal-insulator transition concomitant with a structural phase transition to a distorted rutile phase, akin to NbO2. Our work expands the understanding of tantalum oxides and paves the way for their integration into next-generation electronic and photonic devices.

FOS: Physical sciences↗
DOE OSTI2021

Facile Synthesis of Micrometer-sized Hierarchical Porous Si@C Anodes for High-Performance Lithium-Ion Batteries

Extensive studies have been conducted to determine if replacing graphite anodes with silicon is feasible since silicon possesses a high capacity and is an abundant resource; however, Si anodes suffer significant volume changes during cycling, which pulverizes its structure and subsequently causes rapid capacity fading. We used SiO2 nanoparticles (nSiO2) and low-cost coal-derived humic acid as a feedstock to synthesize high performance Si-C anodes for Li-ion Batteries through spray drying, calcination, and magnesiothermic reductions. Our Si-C anodes features micrometer-sized porous Si coated with a graphitized carbon shell (mpSi@C). The hierarchical graphitized carbon shell and porous silicon structure relieve the mechanical stress of the Si phase upon cycling, which stabilizes the structure. This mpSi@C composite design allows for a high initial discharge capacity of 2199.9 mAh g-1 at 0.1 A g-1 and a cycling performance of 68% capacity retention after 100 cycles at 1.0 A g-1. The multipoint contact between the Si anode and C structure allows for a remarkable performance rate of 566.3 mAh g-1 at 5.0 A g-1.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Development of BPM electronics for PIP-II at Fermilab

This paper presents the uTCA4.0-based BPM electronics for PIP-II, featuring four 250 MSPS ADCs and a Xilinx UltraScale+ MPSoC FPGA with 10 GbE uplink. Design elements include signal conditioning, clock, and thermal management. The FPGA performs signal processing, time tagging, digital down-conversion, and phase drift compensation. Position and phase resolution, and thermal stability - is validated through dedicated testing.

Liu, Shengli [Fermilab] (ORCID:0009000128436936)↗
DOE OSTI2021

Controlling thermoelectric transport via native defects in the diamond-like semiconductors Cu 2 HgGeTe 4 and Hg 2 GeTe 4

Diamond like semiconductors (DLS) have emerged as candidates for thermoelectric energy conversion. Towards understanding and optimizing performance, we present a comprehensive investigation of the electronic properties of two DLS phases, quaternary Cu 2 HgGeTe 4 and related ordered vacancy compound Hg 2 GeTe 4 , including thermodynamic stability, defect chemistry, and transport properties. To establish the thermodynamic link between the related but distinct phases, the stability region for both is visualized in chemical potential space. In spite of their similar structure and bonding, we show that the two materials exhibit reciprocal behaviors for dopability. Cu 2 HgGeTe 4 is degenerately p-type in all environments despite its wide stability region, due to the presence of low-energy acceptor defects V Cu and Cu Hg and is resistant to extrinsic n-type doping. Meanwhile Hg 2 GeTe 4 has a narrow stability region and intrinsic behavior due to the relatively high formation energy of native defects, but presents an opportunity for bi-polar doping. While these two compounds have similar structure, bonding, and chemical constituents, the reciprocal nature of their dopability emerges from significant differences in band edge positions. A Brouwer band diagram approach is utilized to visualize the role of native defects on carrier concentrations, dopability, and transport properties. Here this study elucidates the doping asymmetry between two solid-solution forming DLS phases Cu 2 HgGeTe 4 and Hg 2 GeTe 4 by revealing the defect chemistry of each compound, and suggests design strategies for defect engineering of DLS phases.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Pressure-induced crystallization of an amorphous martensite alloy

Recently, solid-state amorphization through temperature-induced martensitic transition has been reported. The stability of the amorphous martensite phase, which co-exists with a crystalline counterpart, is intriguing but remains ill-defined. In this work, we studied the structural stability of a Ti 59.1 Zr 37 Cu 2.3 Fe 1.6 amorphous martensite alloy by combining in situ high-pressure synchrotron x-ray diffraction with ex situ transmission electron microscopy. During compression at room temperature, an irreversible pressure-induced crystallization of the amorphous martensite phase into a β-Ti phase is revealed. Qualitative analysis reveals the important role of the local atomic strain in stabilizing/destabilizing amorphous martensite alloys and its high tunability of the local atomic strain under high pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2024

New horizons in the holographic conformal phase transition

Abstract We describe 5D dynamical cosmological solutions of the stabilized holographic dilaton and their role in completion of the conformal phase transition. This analysis corresponds, via the AdS/CFT dictionary, to a study of out-of-equilibrium dynamics where trajectories of the dilaton do not depend solely on thermodynamic quantities in the early universe, but have sensitivity also to initial conditions. Unlike the well-studied thermal transition, which requires quantum tunneling of an infrared brane through the surface of an AdS-Schwarzschild horizon, our approach instead invokes an early epoch in which the cosmology is fully 5-dimensional, with highly relativistic brane motion and with Rindler horizons obscuring the infrared brane at early times. In this context, we demonstrate the existence of a large class of natural initial conditions that seed trajectories where the brane simply passes through the Rindler horizon and into the basin of attraction of the stabilized dilaton potential. This corresponds to successful completion of the phase transition without sacrificing perturbativity of the 5D theory.

Physics↗