Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PWR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Artificial Neural Network Modeling for 2-group Pin-Wise Group Constants

A High-fidelity multi-dimensional analysis is getting more attention because of the accurate prediction of local parameters for core design and safety assessment. For this, there are two possible approaches. One is a direct whole-core transport which is quite promising in terms of accuracy. However, it is very costly in terms of the computing time and memory requirements. Another option is the pin-by-pin core analysis using the diffusion theory. In the pin-by-pin core analysis, the multi-group constants can be produced by using the well-known generalized equivalence theory (GET) and these group constants can be corrected by the super homogenization method (SPH). Moreover, it is clear that both cross sections and discontinuity factors (DFs) must be corrected based on the leakage information in order to obtain an accurate solution for pin-by-pin core analysis. In a recent work by W. Kim and Y. Kim, the albedo-corrected parameterized equivalence constants (APEC) method was proposed, in which fuel assembly two-group XSs are parameterized as a function of an assembly-wise current-to-flux ratio (CFR). In the current work, we have investigated feasibility of APEC-like correction of two-group constants for homogenized pins in PWR cores, which is called APEC for Pin-cell or APECp. Unlike the APEC method, the artificial neural network (ANN) is used for functionalization of pin-wise XSs and DFs in this study. The pin-wise two-group parameters are evaluated using a 2- D method of characteristics (MOC)-based lattice code, DeCART2D.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Effect of Delayed Energy Release on Power Normalization in Reactor Depletion Calculations

Reactor depletion calculations typically assume that the thermal power of the reactor is directly proportional to the instantaneous fission rate within the core. However, approximately 7% of the sensible energy released per fission comes from the radioactive decay of fission products, which occurs alter the fission event. Thus, the assumed direct relationship between reactor power and fission rate implies that all fission products have reached secular equilibrium within the core. In situations where fission product concentrations have not reached equilibrium (e.g., shortly after reactor startup or a change in reactor power during operation), the delayed energy release due to fission product decay creates a nonlinear relationship between reactor power and fission rate. This non-linear relationship, in turn, affects the neutron flux levels and fuel consumption rate required to maintain the desired thermal power output for the reactor. For example, during initial startup of a commercial light water reactor the apparent energy release per fission is ∼7{sup %} lower than the typical value of ∼200 MeV/fission due to the potential energy stored in radioactive fission products. As a consequence, the flux level (and, therefore, uranium consumption rate) in the reactor must be correspondingly higher to preserve the desired reactor power. As the reactor operates and fission product inventories increase, the decay heat produced by the reactor will rise, producing a corresponding increase in the apparent energy release per fission. The characteristic time-dependent behavior of energy release due to the decay of fission products (i.e., decay heat) following reactor startup, shutdown, or changes in reactor power is well-known and widely-used in reactor safety analyses. However, to our knowledge, the effects of time-dependent decay heating rates on reactor depletion calculations have not been thoroughly investigated. In this paper, we present a simple methodology for explicitly accounting for delayed energy release due to the decay of fission products in reactor depletion calculations. In the proposed method, the balance equations for fission product decay energy are incorporated into the depletion coefficient matrix, using a strategy similar to that described by Isotalo in 2016. The modified system of differential equations can be solved via a matrix exponential approximation (or other suitable numerical method) to yield solutions for both nuclide densities and decay energy emission densities as a function of time. Numerical results from the method are presented for simplified (one-group point (0-D) and 1-D) representations of a commercial pressurized water reactor (PWR), in order to estimate the effect of delayed energy release on fuel consumption and flux level immediately following reactor startup.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Observation of Downward Facing Pool Boiling on a Hemispherical Vessel under External Reactor Vessel Cooling

It is a great challenge to ensure the safety of nuclear power plant during a severe accident. One of the major concerns is to overheat the reactor core which potentially may create a nuclear crisis if the core cooling fails. The concept of In-vessel retention (IVR) by passive external reactor vessel cooling (ERVC) in a flooded cavity of pressurized water reactor (PWR) is a viable and effective approach to retain radioactive core melt within the reactor pressure vessel (RPV). As long as the heat flux at the lower head of the RPV is lower than the critical heat flux (CHF) limit at the corresponding point, nucleate boiling will be the prevailing regime. In that case, the temperature of outer surface can be maintained near the saturated temperature of water such that the reactor vessel is able to be sufficiently cooled to sustain its thermal and structural integrity. Owing to the practical significance of this IVR-ERVC concept, there were many experimental and theoretical studies to investigate the two-phase flow natural circulation phenomena including the effect of inclination angle on the CHF, based on which many different empirical or semiempirical correlations were developed for CHF by fitting the experimental results. For the engineering applications, reactor-scale facilities such as ULPU series, KAIST facility, CYBL and FIRM were built to experimentally verify and validate the feasibility of ERVC for different design of reactors. Besides, for the research on physical mechanism of downward facing pool boiling, laboratory-scale experiments such as DELTA, CASA and SBLB were performed to visually and theoretically simulate the process of IVR-ERVC. All of the aforementioned test facilities and experiments provided a simulation of the downward facing boiling process and experimental study on the CHF limits during the ERVC conditions of different types of reactors. There were also some visualized investigations on the two-phase flow behavior in both quenching and steady state experiments. In this study, a scale-down three-dimensional downward facing pool boiling facility (iSBLB) was built to investigate the two phase natural circulation flow characteristics during the ERVC process. The general morphologies of vapor mass at different locations were visually recorded using the high-speed camera. The observation results showed that vapor behavior along the hemispherical curved surface was periodical. The boiling phenomenon was quite different from those on all other surface orientations.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Sensitivity Studies of the Inter-subchannel Mixing in Subchannel Analysis

In the PWR reactor core, the power profile is nonuniform and the inter-subchannel mixing is of great importance for flatting the temperature distribution of the coolant and for reactor core safety analysis. Subchannel codes are widely used in the reactor core safety analysis to assess the thermal hydraulic behavior of fuel assemblies. One of basic assumptions in subchannel analysis is that axial flow predominates in the channel flow. Under this assumption, the lateral momentum equation in subchannel codes can be simplified without bringing in significant errors. The inter-subchannel mixing leading to the exchange of mass, energy and momentum are modeled by adding source terms to the hydrodynamic equations or by separate models, and most of source terms and models are empirical correlations. With the advancement of mixing vane grid design, the lateral mixing has becoming a critical components in the evaluation of the inter-subchannel mixing in flow field. The accuracy of the subchannel analysis is strongly dependent on the modeling of inter-subchannel interactions between adjacent subchannels. So the inter-subchannel mixing models should be well considered and developed in subchannel analysis to better reflect their influence on flow field and temperature field in rod bundle. Generally speaking, the inter-subchannel mixing in subchannel analysis contains turbulent mixing and crossflow mixing in single phase flow. When it comes to two phase flow, the void drift will also contribute to inter-subchannel mixing [2]. Both the mechanisms and the generation conditions of each type of inter-subchannel mixing are different from each other. Turbulent mixing is a result of random turbulent flow and pressure fluctuations. Crossflow is caused by a net transverse pressure difference between adjacent subchannels. Lateral pressure differences can result from different subchannel hydraulic diameters, mass flux, heat flux distributions and changes in flow areas caused, for example, by wire wraps and spacer grids, respectively. Two-phase void drift is due to the tendency of the vapor phase to redistribute itself to a preferred equilibrium void distribution. This paper focuses on the sensitivity study of the inter-subchannel mixing with mixing vane grids for single phase flow in subchannel analysis. Both the turbulent mixing and crossflow mixing of the 5 x 5 rod bundle with mixing vane grids are predicted, and the results are compared and analyzed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

TRACE Analysis of Loss of Flow for the APR1400

The APR1400 is a pressurized water reactor (PWR). The APR1400 nuclear steam supply system consists of a reactor pressure vessel (RPV), which contains the reactor core, and two primary reactor coolant system loops connected in parallel to the RPV. Each coolant loop consists of a hot leg (HL), a u-tube steam generator (SG), two reactor coolant pumps (RCPs) and two cold legs (CLs). A pressurizer is connected to the hot leg on one of the coolant loops. During normal operation, the RCPs circulate high pressure water through the reactor core to remove the heat. The heated water exits the RPV and passes through the hot legs into the steam generator tubes. Heat is transferred through the walls of the steam generator tubes into a lower pressure secondary coolant system. Cooled primary system water from the steam generators is returned through the RCPs and cold legs to the RPV. The RCPs operate at constant speed; the primary coolant system is designed to provide a prescribed rate of coolant flow through the reactor core. The APR1400 SG secondary coolant system pressure is controlled through modulation of valves in the steam lines to maintain a prescribed turbine inlet pressure. The SG secondary coolant inventory is controlled by using a feedwater control system to maintain a prescribed liquid level in the steam generator downcomer. This water inventory level is sufficient to cover the outer surfaces of the steam generator tubes while preventing overfill that would cause liquid to pass from the steam generators through the steam lines into the turbine system. In the current work, the Nuclear Regulatory Commission's reactor systems analysis code, TRACE?2 was used to perform an analysis of a loss of flow anticipated operational occurrence (AOO). The loss of flow is initiated by a loss of off-site power (LOOP), resulting in a trip of the RCPs. The regulatory purpose of the current work is to confirm safety analyses documented in the APR1400 Design Control Document (DCD)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Methodology of Experiment Design for Improving Transient Critical Heat Flux Model Development

One phenomenon that contributes to nuclear fuel and clad failure mechanisms is the departure from nucleate boiling (DNB). Accident scenarios such as reactivity-initiated accidents (RIAs) provide conditions where the frequency of boiling crisis is much more likely to occur and on much shorter time scales than loss of coolant (LOCA) or loss of flow (LOFA) accidents. Here, boiling crisis in the form of DNB is attributed to transient-induced heat flux values that exceed the critical heat flux (CHF). The resulting effects, such as bubble crowding and eventual dryout, can affect flow boiling heat transfer and compromise the structural integrity of nuclear reactor materials. The focus of the work proposed here lies in developing a rigorous process using out-of-pile testing, under simulated RIA conditions, to determine the transient critical heat flux of cladding materials, without contributions from aforementioned radiation-induced effects that have been observed during in-pile experiments. This study provides a road-map for developing and performing experiments that simulate the power profile and energy deposition aspects of transient events, specific to RIAs, on the laboratory scale. The goal of our project is to observe and measure DNB in an annular flow channel around a single heater rod that is operating and nominal thermal hydraulic conditions of a PWR. It is also an aim of these experiments to determine how to quantify the gap between SS and transient CHF cases, based on state-dependent properties of the cladding material type that is being interrogated. Traditionally, CHF is determined as a combination of four factors: hydraulic diameter, system pressure, mass flow, fluid quality. The authors propose that an additional measureable quantity, which is dependent on the structural properties of the cladding material itself, is partly reasonable for the difference between measured and model-developed CHF values. Using a carefully metered approach will allow for several key concepts to be realized: compensation for transient-based effects to current models for CHF; adaptation of current models for different cladding material types, including Gen-IV concept materials; and implementation of a correction factor to account for both power transient-based and radiation-induced effects on the CHF that have not yet been accounted for.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Counterpart Test on IBLOCA of 13% Cold Leg Break in ATLAS Facility

In the analysis for Loss-of-Coolant Accident (LOCA) as a design-basis accident (DBA) of a pressurized water reactor (PWR), redefinition of the break size based on the risk-informed regulation (RIR) is being extensively investigated due to the potential safety benefits. The pipe integrity and break frequency has been found to depend on the pipe size, so that a complete rupture of a smaller pipe such as a pressurizer surge-line or an emergency core cooling system (ECCS) nozzle is more probable than a double-ended guillotine break (DEGB) of primary coolant circuit piping. The scenario with the break of these pipes can be regarded as intermediate break (IB) LOCA. With an aim of expanding code validation to address safety issues of the IBLOCA and developing an evaluation model (EM) for full spectrum LOCA, the database for the IBLOCA test in an integral effect test (IET) facility is essential. In particular, an experimental data from the counterpart test can contribute to enhance our understanding on the phenomena and resolve the scaling issues in the scaled-down test facilities. The objective of this study is to investigate thermal hydraulic phenomena during the IBLOCA by the counterpart test for the 13% cold leg break in ATLAS facility, which was the A.2 test in the OECDATLAS project. This integral effect test would contribute to evaluate the scaling effect of the ATLAS design and test condition.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Complik: A versatile tool for automatizing the representation of material data in MCNP models - 14412

At the Paul Scherrer Institut, the CASMO/SIMULATE code system is used as reference scheme for core analyses of the Swiss reactors. Besides, Monte Carlo (MC) based neutron transport codes are in parallel being established both for out-of-core applications and full core analyses, in order to provide higher fidelity solutions to problems beyond the modelling capabilities of the standard core modelling methods. In this perspective, a necessity is to be able to conduct the MC calculations at any operating conditions, requiring thus proper initialisation of the thermal-hydraulic feedback as well as at any burnup, prompting the need for a detailed modelling of all material zones in the irradiated fuel assemblies. To tackle the later challenge, the development of the COMPLINK tool, aimed at initialising large-scale MC models of burned core configurations, using as basis upstream 2-D assembly/ 3-D core analyses results, was initiated and is presented in this paper. A main feature is the capability to extend in an automatic manner, a user given MC model in order to represent material data with a higher resolution, keeping track of the location of such materials also within nested repeated structures. This capability prevents the user from the burden of developing specific computational framework for a target application. Since the same functionalities are required to analyse out-of-core spent fuel managements systems, a first verification of COMPLINK is illustrated on the basis of a criticality safety evaluation (CSE) with MCNP6.1 of a Swiss PWR wet storage pool loaded with fresh and burned fuel assemblies. Starting from CASMO-5 depletion calculations at each axial layer of the depleted fuel assemblies and reconstructed based on realistic irradiation histories, COMPLINK is then applied to load the isotopic compositions into the material zones of the corresponding MCNP6.1 assembly models. On this basis, the CSE analyses are conducted with focus on investigating axial and radial modelling effects. All in all, the obtained results are found to be well in line with the impact on CSE expected at the considered burnup levels, providing thus confidence in the correct implementation of the COMPLINK functionalities and confirming its effectiveness as well as efficiency for the initialization of all material zones in large-scale MC models of complex and strongly heterogeneous burned configurations. (authors)

42 ENGINEERING↗

Preliminary critical experiments validation of a lattice physic code LATC - 14415

Core and System Integrated Engine for design and analysis (COSINE) is an integrated nuclear engineering code package, which is being developed by State Nuclear Power Software Development Center (SNPSDC) in China. A lattice physics code named LATC is included in COSINE.LATC is a 2D, steady-state code for modeling PWR fuel. A WIMS-D 69 group micro library based on ENDF/B-VI is used and there are two transportation methods in LATC, such as two steps method (collision probability method for cell homogenization, discrete coordinate method for assembly homogenization) and one step method (MOC). The UO{sub 2} fuel assembly, which may contain guide tubes, burnable poisons such as Integral Fuel Burnable Absorbers (IFBA) / Wet Annular Burnable Absorbers (WABA)/ Pyrexes or control rods etc, can be calculated in LATC. LATC provides the required cross-section data for the core physics simulator analysis code in COSINE. In order to evaluate the quality of the LATC, a strategy of validation is researched and applied to the LATC. Firstly, a validation requirement analysis is performed, and the corresponding critical experiments are collected, and then a critical experimental matrix considering the variety of fuel enrichments, fuel pitch and water to uranium ratio is generated. Finally, a comparison of results between LATC using collision probability and discrete coordinate method and critical experiments are made to make sure that the code works well. According to the validation strategy discussed above, the preliminary validation is carried out and critical experiments are calculated according to the critical experimental matrix and results from LATC code are compared with reference results. The result shows that the calculated results agree well with critical experiments, and do not indicate any significant trends with respect to the various conditions considered. (authors)

42 ENGINEERING↗

Application of the EPRI depletion reactivity benchmarks - 14423

The EPRI measured-based depletion reactivity benchmarks intend to facilitate the validation of burnup credit by validating the combined effect of changes in isotopic content and cross-sections. In the framework of burnup credit implementation for PWR fuels, this paper proposes to study the application of the EPRI benchmarks for a spent fuel pool criticality evaluation using the French tools: the DARWIN 2.2 depletion package and the CRISTAL V1 criticality safety package, both based on cross-section libraries from the JEF2.2 evaluation. For that purpose, the benchmarks are analyzed using the connection of DARWIN 2.2 with APOLLO2-MORET 4, allowing the determination of the bias for the reactivity decrement. Then, these results are used to define a bias to take into account in the criticality evaluation of a spent fuel pool. In addition, the benefit of the EPRI depletion reactivity benchmarks is assessed through a comparison with the validation approach adopted in France until now. The bias resulting from this latter approach is evaluated by 1) applying, to the calculated nuclides concentrations, isotopic penalizing factors derived from the comparison between calculated values of nuclide concentrations and experimental values obtained from used fuel chemical analyses from French reactors, 2) analyzing representative critical experiments. Additional analysis of the benchmarks using the connection of VESTA 2.1 with MORET 5 is performed as these codes allow calculations of complex 3D geometrical configurations and the use of various nuclear data libraries. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Computational scheme for burnup credit applied to long term waste disposal - 14448

The application of burnup credit (BUC) to criticality safety evaluations (CSE) of geological repositories for long term disposal of spent nuclear fuel (SNF) is under consideration in Switzerland. Therefore, in collaboration with the national waste management organization, PSI is conducting research towards the development of a BUC methodology tailored for Swiss specific applications. As part of this research, a computational sequence from the in-core burnup phase, through the interim storage, until final disposal is being established. The tools selected for this methodology, referred to as BUCSS-R (Burnup Credit System for Swiss reactors and Repositories), are CASMO for the in-core fuel depletion, the decay module of SERPENT for the decay calculations, and MCNP for the criticality calculations. In connection to BUCSS-R, a computational interface to validated reference core models of the Swiss reactors is being developed. The purpose is to apply reconstructed depletion histories based on real core operation conditions with CASMO assembly calculations, to transfer the pin wise nuclide compositions at discharge to the subsequent SERPENT decay calculations, and afterwards to the final MCNP criticality calculations. An objective of this paper is to present the elements of the BUCSS-R methodology, and to show a first application to so-called bounding analyses of a preliminary Swiss disposal canister design loaded with fuel assembly types operated in a Swiss PWR reactor. The rationale for these bounding analyses is that before starting the integration of methodologies for bias and uncertainty quantifications, the span of the k-eff variation between fresh and burnt fuel loadings should first be quantified in a realistic manner. The obtained results are reported in this paper together with studies performed in order to evaluate the effects from burnup levels and nuclides credit at flooded conditions on the k-eff values. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The application of ICASPA to critical and safe mass calculations - 14586

ICASPA, an Improved Critical and Safe Parameters Algorithm, calculates the size of a fissile body for a given value of k-effective. ICASPA uses an iterative predictor/corrector algorithm in which the MONK9A code is used to derive a precise k-effective value for a given candidate body size; auxiliary equations are then used to adjust the body size. The process is repeated until MONK9A outputs the chosen target value of k-effective. EDF Energy operates eight nuclear power stations comprising one Pressurized Water Reactor (PWR) and seven Advanced Gas-cooled Reactor (AGR) stations. At these sites, the term 'fuel route' is used to encompass all of the ex-reactor arrangements for the handling and storage of fuel. The criticality safety cases for these fuel routes are based on the use of geometrically safe arrangements for the required quantities of fuel. The allowed quantities and arrangements of fuel are safely sub-critical, even under the contingency of accidental moderator ingress. The fuel route safety cases consider all credible potential fault conditions, including events such as dropped fuel. Any such events might change the geometry of the fuel elements, but it is difficult to calculate exact k-effective values for realistic models of dropped fuel. This difficulty is overcome by the use of an alternative approach in which limiting safe masses are calculated for bounding (worst-case) rearrangements of fuel rods and moderators, using geometries similar to those covered by criticality handbook data. Where required, the resulting safe masses are used to set safety case limits and conditions. For example, some fire extinguishants, such as water and ABC dry powder, are also effective moderators. Hence, in some fuel route areas, administrative criticality controls are used to either prohibit or limit the permitted quantities of these materials. This paper describes the work that has been carried out to adopt ICASPA as the approved calculation method for these safe mass calculations. The work has been carried out within the company quality assurance requirements for nuclear safety related software. It has involved the development of a configuration controlled version of ICASPA and the local verification and validation of the resulting code. The benefits from the adoption of ICASPA are also presented. These include accuracy improvements and, because the method uses the MONK9A code for k-effective calculations, the ability to use more sophisticated models for limiting case geometries. (authors)

42 ENGINEERING↗

Nuclear Safety [Vol. 32, No. 1, January-March 1991]

Nuclear Safety is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Table of Contents for this issue follows. GENERAL SAFETY CONSIDERATIONS: 1 The Safety Review and Approval Process for Space Nuclear Power Sources, G. L. Bennett; 19 Report on the American Nuclear Society International Topical Meeting: "The Safety, Status, and Future of Non-Commercial Reactors and Irradiation Facilities", E. G. Silver; 35 Book Review: Fission Product Transport Processes in Reactor Accidents, Proceedings to the International Centre tor Heat and Mass Processes T. S. Kress; 38 Fast Reactor Technology in the 1990s: A Summary of the 1990 International Fast Reactor Safety Meeting, A. E. Levin; ACCIDENT ANALYSIS: 56 Effects of Chemical Phenomena on LWR Severe Accident Fission Product Behavior, A. P. Malinauskas and T. S. Kress; CONTROL AND INSTRUMENTATION: 65 Technical Note: Safety Parameter Display Systems—10 Years Later, R. J. Eckenrode; 68 Potential Application of Neural Networks to the Operation of Nuclear Power Plants, R. E. Uhrig; DESIGN FEATURES: 80 Twenty-First DOE/NRC Nuclear Air-Cleaning Conference, R. R. Bellamy, D. W. Moeller, and M. W. First; 91 Impact of an Apparent Radiation Embrittlement Rate on the Life Expectancy of PWR Vessel Supports, R. D. Cheverton, G. C. Robinson, W. E. Pennell, and R. K. Nanstad; ENVIRONMENTAL EFFECTS: 103 Technical Note: The Impact of Offsite Factors on the Safety Performance of Small Nuclear Power Plants, Yu. D. Baranaev and A. N. Viktorov; WASTE AND SPENT FUEL MANAGEMENT: 109 Activities Related to Waste Management, Compiled by E. G. Silver; OPERATING EXPERIENCES: 118 Reactor Shutdown Experience, Compiled by J. W. Cletcher; 121 Selected Safety-Related Events, Compiled by G. A. Murphy; 123 Operating U.S. Power Reactors, Compiled by E. G. Silver; RECENT DEVELOPMENTS: 140 General Administrative Activities, Compiled by E. G. Silver; 150 Reports, Standards, and Safety Guides, D. S. Queener; 155 Status of Power-Reactor Licensing Activities, Compiled by E. G. Silver; 157 Proposed Rule Changes as of Sept. 30, 1990; ANNOUNCEMENTS: 79 MIT Offers Summer Program on Nuclear Power Reactor Safety; 108 Harvard School of Public Health Offers Several Short Courses; 139 Short Course and Workshop on Nuclear Criticality Safety at University of New Mexico; 160 SCK/CEN Announces Training Course on Emergency Planning and Response; 161 The Authors; 164 Indexes to Nuclear Safety, Volume 31

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

CHARACTERIZATION OF DEFECTS IN ALLOY 152, 52 AND 52M WELDS

Defect distributions have been documented by optical metallography, scanning electron microscopy and electron backscatter diffraction in alloy 152 and 52 mockups welds, alloy 52 and 52M overlay mockups and an alloy 52M inlay. Primary defects were small cracks at grain boundaries except for more extensive cracking in the dilution zone of an alloy 52 overlay on 304SS. Detailed characterizations of the dilution zone cracks were performed by analytical transmission electron microscopy identifying grain boundary titanium-nitride precipitation associated with the intergranular separations. I. INTRODUCTION Weldments continue to be a primary location of stress-corrosion cracking (SCC) in light-water reactor systems. While problems related to heat-affected-zone (HAZ) sensitization and intergranular (IG) SCC of austenitic stainless alloys in boiling-water reactors (BWRs) have been significantly reduced, SCC has now been observed in HAZs of non-sensitized materials and in dissimilar metal welds where Ni-base alloy weld metals are used. IGSCC in weld metals has been observed in both BWRs and pressurized water reactors (PWRs) with recent examples for PWR pressure vessel penetrations producing the most concern. This has led to the replacement of alloy 600/182/82 welds with higher Cr, more corrosion-resistant replacement materials (alloy 690/152/52/52M). Complicating this issue has been a known susceptibility to cracking during welding [1-7] of these weld metals. There is a critical need for an improved understanding of the weld metal metallurgy and defect formation in Ni-base alloy welds to effectively assess long-term performance. A series of macroscopic to microscopic examinations were performed on available mockup welds made with alloy 52 or alloy 152 plus selected overlay and inlay mockups. The intent was to expand our understanding of weld metal structures in simulated LWR service components with a focus on as-welded defects. Microstructural features, defect distributions, defect characteristics and weld residual strains were examined by optical metallography, scanning electron microscopy, electron backscatter diffraction and transmission electron microscopy. Industry-supplied mock-up welds were characterized including alloy 52 and 152 weldments, alloy 52M overlay and inlay welds, and an alloy 52 overlay. II. WELDMENTS II.A. Alloy 52 and 152 Weld Mockups The alloy 52 and 152 weld mockups were fabricated by MHI for the Kewaunee reactor and were obtained from the EPRI NDE Center. The mockups were U-groove welds joining two plates of 304SS as shown in Figure 1. Alloy 152 butter (heat 307380) was placed on the U-groove surface for both mockups by shielded metal arc welding (SMAW). For the alloy 152 weld mockup, the alloy 152 fill (heat 307380) was also applied using SMAW while for the alloy 52 weld mockup, the alloy 52 fill (heat NX2686JK) was applied using gas tungsten arc welding (GTAW). Welding parameters for the fill materials were substantially different with the alloy 152 SMAW having a deposition speed of 4-25 cm/min with a current of 95-145 A and the alloy 52 GTAW having a deposition speed of 4-10 cm/min with a current of 150-300 A. One prominent feature in these mockup welds is the presence of a crack starting at the 304SS butt joint at the bottom of the U-groove and extending up into the weld. It appears that the 304SS plate on either side of the butt joint acted as an anchor for the weld resulting in a stress rise across the slit that drove crack formation and extension up into the fill weld. As will be shown in the next section, the extent of the cracking around this stress riser was much greater in the MHI 52 weld mockup.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Forward-Weighted CADIS Method for Variance Reduction of Monte Carlo Reactor Analyses

Current state-of-the-art tools and methods used to perform 'real' commercial reactor analyses use high-fidelity transport codes to produce few-group parameters at the assembly level for use in low-order methods applied at the core level. Monte Carlo (MC) methods, which allow detailed and accurate modeling of the full geometry and energy details and are considered the 'gold standard' for radiation transport solutions, are playing an ever-increasing role in correcting and/or verifying the several-decade-old methodology used in current practice. However, the prohibitive computational requirements associated with obtaining fully converged system-wide solutions restrict the role of MC to benchmarking deterministic results at a limited number of state-points for a limited number of relevant quantities. A goal of current research at Oak Ridge National Laboratory (ORNL) is to change this paradigm by enabling the direct use of MC for full-core reactor analyses. The most significant of the many technical challenges that must be overcome is the slow non-uniform convergence of system-wide MC estimates and the memory requirements associated with detailed solutions throughout a reactor (problems involving hundreds of millions of different material and tally regions due to fuel irradiation, temperature distributions, and the needs associated with multi-physics code coupling). To address these challenges, research has focused on development in the following two areas: (1) a hybrid deterministic/MC method for determining high-precision fluxes throughout the problem space in k-eigenvalue problems and (2) an efficient MC domain-decomposition algorithm that partitions the problem phase space onto multiple processors for massively parallel systems, with statistical uncertainty estimation. The focus of this paper is limited to the first area mentioned above. It describes the FW-CADIS method applied to variance reduction of MC reactor analyses and provides initial results for calculating group-wise fluxes throughout a generic 2-D pressurized water reactor (PWR) quarter core model.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Characterization of the Hydrothermal Corrosion Behavior of Ceramics for Accident Tolerant Fuel Cladding

Accident-tolerant fuel (ATF) is an increasingly important research topic for the nuclear industry, and ceramics such as SiC are strong contenders for deployment as ATF cladding. The hydrothermal corrosion characteristics of SiC and Al2O3 were investigated via constantly-refreshing autoclave corrosion and post exposure characterization. Four different types of chemical vapor deposited (CVD) SiC specimens were examined (two with high electrical resistance, one with low electrical resistance, and a single crystal 4H structural variant). Al2O3 specimens were prepared in single crystal and polycrystalline states. PWR primary water, BWR–HWC, and BWR–NWC environments were maintained throughout the experiments. Characterization conducted using SEM and EDS was used to determine factors affecting corrosion rates and susceptibility to grain boundary attack in each water chemistry condition. Raman spectroscopy was also used to determine chemical variation of the surface with corrosion. Grain boundary attack was found to be significant for both alumina and SiC polycrystalline variants.

Doyle, Peter↗

Adsorption of Ions on Zirconium Oxide Surfaces from Aqueous Solutions at High Temperatures.

Surface titrations were carried out on suspensions of monoclinic ZrO{sub 2} from 25 to 290 C slightly above saturation vapor pressure at ionic strengths of 0.03, 0.1 and 1.0 mol {center_dot} kg{sup -1}(NaCl). A typical increase in surface charge was observed with increasing temperature. There was no correlation between the radius of the cations, Li{sup +}, Na{sup +}, K{sup +} and (CH{sub 3}){sub 4}N{sup +}, and the magnitude of their association with the surface. The combined results were treated with a 1-pK{sub a} MUSIC model, which yielded association constants for the cations (and chloride ion at low pH) at each temperature. The pH of zero-point-charge, pH{sub zpc}, decreased with increasing temperature as found for other metal oxides, reaching an apparent minimum value of 4.1 by 250 C. Batch experiments were performed to monitor the concentration of LiOH in solutions containing suspended ZrO{sub 2} particles from 200 to 360 C. At 350 and 360 C, Li{sup +} and OH{sup -} ions were almost totally adsorbed when the pressure was lowered to near saturation vapor pressure. This reversible trend has implications not only to pressure-water reactor, PWR, operations, but is also of general scientific and other applied interest. Additional experiments probed the feasibility that boric acid/borate ions adsorb reversibly onto ZrO{sub 2} surfaces at near-neutral pH conditions as indicated in earlier publications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A System-Level Model for Estimating Residual Strain and Life of Nuclear Reactor Coolant System Components Under Connected-System-Thermal–Mechanical Boundary Conditions

Background: Environmental-assisted fatigue (EAF) is a major issue for the long-term survival of nuclear power plant fleets in the U.S. and worldwide. Multi-material welded regions (e.g., nozzles) and other high-stress regions of reactor coolant system (RCS) components are prone to EAF-related damage. Objective: The discussed work describes a system-level finite element (FE) model of RCS components of a pressurized water reactor (PWR). This is with the goal of predicting the stress hotspots, strain residuals, strain amplitudes and the resulting fatigue lives. Methods: Herein, the FE model was developed considering system-level loading conditions (under connected system thermal-mechanical boundary conditions). Thermal-mechanical stress analysis was performed considering thermal stratification and a design-basis reactor loading cycle. Based on the FE model results, the strain residuals, strain amplitudes and resulting fatigue lives of RCS components were predicted. Results: The results show that some of the RCS components can have significantly different strain amplitudes, residual strain, and fatigue lives, despite having similar geometry and material. Higher residual strain can lead to accelerated cyclic hardening of material and the associated effect of EAF. The simulated component-level strain profile (under realistic multi-axial-multi-physics loading cycle) can guide the selection of appropriate test inputs for conducting laboratory-scale EAF tests, which is a focus of future works. Conclusions: Despite similar geometry and material the RCS component can have significantly different strain profiles and resulting fatigue lives. The discussed approach can help to identify and prioritize the RCS components for conducting expensive nondestructive evaluation (NDE) inspections.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗