Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA DENSITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

A simple spectral model of the dynamics of the Venus ionosphere

A two-dimensional model of the ionosphere of Venus has been constructed by expanding pertinent quantities in Legendre polynomials. The model is simplified by including only a single ion species, O(+). Horizontal plasma flow velocity and plasma density have been calculated as a coupled system. The calculated plasma flow velocity is found to be in good agreement with observations and the results of earlier studies. Solar zenith angle dependence of plasma density, particularly on the nightside, shows some features which differ from results of earlier studies and observed values. Effects of raising or lowering the ionopause height and changing the nightside neutral atmosphere have been discussed.

Singhal, R. P.↗

Numerical simulations for cold layer formation in an inverse Z-pinch magnetized target fusion system

One-dimensional magnetohydrodynamic simulations have been performed to study cold layer formation in a magnetized target fusion system with an inverse Z-pinch target plasma. Three phases of cold layer evolution has been identified. During the early compression phase, when liner velocities were not high, formation of a ''classical'' cold layer is observed, with monotonically increasing plasma densities and decreasing temperatures as the liner is approached. During the main compression phase, lasting until close to peak compression, magnetic flux leakage from the plasma to the liner is not important. The cold layer is then characterized by monotonically decreasing plasma temperature, density, and thermal conductivity. This has practical significance, since it would tend to reduce thermal losses to the liner. During the late compression and burn phases, magnetic flux leakage into the liner becomes important. This phase is characterized by a rapid increase in density and a rapid decrease in magnetic field and temperature toward the liner. This yields significantly higher values of thermal conductivity than in the bulk plasma, leading to enhanced thermal losses. During the first two phases, the entire plasma is magnetically confined. During the last phase, the cold layer changes to a wall-confined mode, while the bulk plasma continues to be magnetically confined. This is a major difference from earlier assumptions about wall confinement of such plasmas. These results show that the Kadomtsev stability parameter exceeds unity in the cold layer during the second and third phases, which may be an indication of instability. The choice of the transport model has a significant effect upon plasma evolution and the plasma lifetime. Classical transport yields plasma density levels near the liner that are significantly higher, sometimes by orders of magnitude, than those yielded by Bohm transport. During the main compression phase, Bohm diffusivity yields a lower lifetime, as expected. During the early compression phase, however, the classical lifetime is unexpectedly below the Bohm value. A physical explanation has been provided for these trends.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Current Status of the Gasdynamic Mirror Fusion Propulsion Experiment

Nuclear fusion appears to be the most promising concept for producing extremely high specific impulse rocket engines. One particular fusion concept which seems to be particularly well suited for fusion propulsion applications is the gasdynamic mirror (GDM). An experimental GDM device has been constructed at the NASA Marshall Space Flight Center to provide an initial assessment of the feasibility of this type of propulsion system. An initial shakedown of the device is currently underway with initial experiments slated to occur in late 2001. This device would operate at much higher plasma densities and with much larger L/D ratios than previous mirror machines. The high L/D ratio minimizes to a large extent certain magnetic curvature effects which lead to plasma instabilities causing a loss of plasma confinement. The high plasma density results in the plasma behaving much more like a conventional fluid with a mean free path shorter than the length of the device. This characteristic helps reduce problems associated with 'loss cone' microinstabilities. The device has been constructed to allow a considerable degree of flexibility in its configuration thus permitting the experiment to grow over time without necessitating a great deal of additional fabrication.

Emrich, William J., Jr.↗

First Results of the Gasdynamic Mirror Experiment

An experimental Gasdynamic Mirror or GDM device has been constructed at the NASA Marshall Space Flight Center to provide an initial assessment of the applicability of this technology for propulsion systems. This paper presents the first experimental results obtained from the machine. It is intended that this device operate at higher plasma densities and with much larger L/D ratios than previous mirror machines. The high L/D ratio minimizes to a large extent certain magnetic curvature effects which lead to plasma instabilities causing a loss of plasma confinement. The high plasma density results in the plasma behaving much more like a conventional fluid with a mean free path shorter than the length of the device. This characteristic helps reduce problems associated with "loss cone" microinstabilities. The device has been constructed to allow a considerable degree of flexibility in its configuration thus permitting the experiment to grow over time without necessitating a great deal of additional fabrication.

Emrich, William J., Jr.↗

First Results of the Gasdynamic Mirror Fusion Propulsion Experiment

An experimental Gasdynamic Mirror or GDM device has been constructed at the NASA Marshall Space Flight Center to provide an initial assessment of the applicability of this technology for propulsion systems. This paper presents the first experimental results obtained from the machine and an analysis of the types of plasma instabilities likely to be encountered. It is intended that this device operate at higher plasma densities and with much larger L/D ratios than previous mirror machines. The high L/D ratio minimizes to a large extent certain magnetic curvature effects which lead to plasma instabilities causing a loss of plasma confinement. The high plasma density results in the plasma behaving much more like a conventional fluid with a mean free path shorter than the length of the device. This characteristic helps reduce problems associated with "loss cone" microinstabilities. The device has been constructed to allow a considerable degree of flexibility in its configuration thus permitting the experiment to grow over time without necessitating a great deal of additional fabrication.

Emrich, William J., Jr.↗

Structural properties of lithium atom under weakly coupled plasma environment

The Rayleigh-Ritz variational technique with a Hylleraas basis set is being tested for the first time to estimate the structural modifications of a lithium atom embedded in a weakly coupled plasma environment. The Debye-Huckel potential is used to mimic the weakly coupled plasma environment. The wave functions for both the helium-like lithium ion and the lithium atom are expanded in the explicitly correlated Hylleraas type basis set which fully takes care of the electron-electron correlation effect. Due to the continuum lowering under plasma environment, the ionization potential of the system gradually decreases leading to the destabilization of the atom. The excited states destabilize at a lower value of the plasma density. The estimated ionization potential agrees fairly well with the few available theoretical estimates. The variation of one and two particle moments, dielectric susceptibility and magnetic shielding constant, with respect to plasma density is also been discussed in detail.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evaporated Lithium Surface Coatings in NSTX

Two lithium evaporators were used to evaporate more than 100 g of lithium on to the NSTX lower divertor region. Prior to each discharge, the evaporators were withdrawn behind shutters, where they also remained during the subsequent HeGDC applied for periods up to 9.5 min. After the HeGDC, the shutters were opened and the LITERs were reinserted to deposit lithium on the lower divertor target for 10 min, at rates of 10-70 mg/min, prior to the next discharge. The major improvements in plasma performance from these lithium depositions include: 1) plasma density reduction as a result of lithium deposition; 2) suppression of ELMs; 3) improvement of energy confinement in a low-triangularity shape; 4) improvement in plasma performance for standard, high-triangularity discharges; 5) reduction of the required HeGDC time between discharges; 6) increased pedestal electron and ion temperature; 7) reduced SOL plasma density; and 8) reduced edge neutral density.

10100 Impurities↗

Reflectionless passage of an electromagnetic wave through an inhomogeneous plasma layer

An exactly solvable model is used as a basis to study the reflectionless passage of a transverse electromagnetic wave through an inhomogeneous plasma containing large-amplitude, small-scale (subwave-length) structures (in particular, opaque regions) that cannot be correctly described by approximate methods. It is shown that, during the reflectionless passage of an electromagnetic wave, strong wave field splashes can occur in certain plasma sublayers. The nonuniform spatial plasma density profile is characterized by a number of free parameters describing the modulation depth of the dielectric function, the characteristic sizes of the structures and their number, the thickness of the inhomogeneous plasma region, and so on. Such plasma density structures are shown to be very diverse when, e.g., a wave that is incident from vacuum propagates without reflection through a plasma layer (wave barrier transillumination). With the cubic nonlinearity taken into account, a one-dimensional problem of the nonlinear transillumination of an inhomogeneous plasma can be solved exactly.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The optimal beam-loading in two-bunch nonlinear plasma wakefield accelerators

Abstract Due to the highly nonlinear nature of the beam-loading, it is currently not possible to analytically determine the beam parameters needed in a two-bunch plasma wakefield accelerator for maintaining a low energy spread. Therefore in this paper, by using the Broyden–Fletcher–Goldfarb–Shanno algorithm for the parameter scanning with the code QuickPIC and the polynomial regression together with k -fold cross-validation method, we obtain two fitting formulas for calculating the parameters of tri-Gaussian electron beams when minimizing the energy spread based on the beam-loading effect in a nonlinear plasma wakefield accelerator. One formula allows the optimization of the normalized charge per unit length of a trailing beam to achieve the minimal energy spread, i.e. the optimal beam-loading. The other one directly gives the transformer ratio when the trailing beam achieves the optimal beam-loading. A simple scaling law for charges of drive beams and trailing beams is obtained from the fitting formula, which indicates that the optimal beam-loading is always achieved for a given charge ratio of the two beams when the length and separation of two beams and the plasma density are fixed. The formulas can also help obtain the optimal plasma densities for the maximum accelerated charge and the maximum acceleration efficiency under the optimal beam-loading respectively. These two fitting formulas will significantly enhance the efficiency for designing and optimizing a two-bunch plasma wakefield acceleration stage.

Physics↗

Influence of the Edge Plasma Profile and Parameters on the Coupling of an ICRH Antenna. Application to ITER

The coupling to the fast wave of an ICRH antenna is principally determined by its distance to an optimum plasma density correlated to the cutoff one and by the density gradient between this optimum density and the bulk plasma. This explains the differences in coupling for the various heating and current drive phasings as predicted for different plasma edge profiles considered for ITER. For a given electron density edge profile the ion mix, the steady magnetic field and the frequency have also a significant effect on the coupling performances. These quantities affect the coupling mainly by influencing the position of the optimum density in the profile. A marked perturbation of the coupling leading to a large edge power deposition can occur when the Alfven resonance lies in the edge profile. The results are applied to different ICRF scenarios considered for ITER at full and half toroidal field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Korteweg-de Vries Burgers equation for magnetosonic wave in plasma

Korteweg-de Vries Burgers (KdVB) equation for magnetosonic wave propagating in the perpendicular direction of the magnetic field is derived for homogeneous electron-ion magneto-plasmas. The dissipation in the system is taken into account through the kinematic viscosity of the ions. The effects of kinematic viscosity of ions, plasma density, and magnetic field strength on the formation of magnetosonic shocks are investigated. It is found that the shock strength is enhanced with the increase in the plasma density of the system. However, the increase in magnetic field strength decreases the amplitude of magnetosonic shock wave. The critical value of the dissipative coefficient to form oscillatory profile and monotonic shock is also discussed. The numerical results have also been plotted by taking the parameters from laboratory plasma experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical studies of the effects of precursor plasma on the performance of wire-array Z-pinches

This paper is to numerically investigate, in one dimension, the effects of precursor plasma resulted from wire-array ablation on the performance of its following implosion after the ablation. The wire-array ablation is described by an analytic model, which consists of a rocket model or Sasorov's expression of wire-array mass ablation rate, the evolution equation of magnetic field, and several roughly reasonable assumptions. The following implosion is governed by the radiation magnetohydrodynamics. The implosion processes of wire-array Z-pinch from plasma shells prefilled and un-prefilled by the low-density plasma inside them are studied, and that from the wire-array ablations, which may be changed through varying the ablation time, ablation rate, and ablation velocity V{sub abl}, are also simulated. The obtained results reveal that the prefilled low-density plasma and the precursor plasma from the wire-array ablation help to enhance the plasma shell pinch and the final implosion of the wire array, respectively, compared to the pinch of un-prefilled plasma shell. With the same plasma masses, which are distributed in the interior of the array and the shell, and modified Spitzer resistivity, the implosions that start from the wire ablation develop faster than that from the plasma shell with the prefill. If more substance ablates from the wire array before the start of its implosion, the final Z-pinch performance could be better. The Z-pinch plasma is highly magnetized with driven current more than 3 MA.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evaporated lithium surface coatings in NSTX.

Two lithium evaporators were used to evaporate more than 100 g of lithium on to the NSTX lower divertor region. Prior to each discharge, the evaporators were withdrawn behind shutters, where they also remained during the subsequent HeGDC applied for periods up to 9.5 min. After the HeGDC, the shutters were opened and the LITERs were reinserted to deposit lithium on the lower divertor target for 10 min, at rates of 10-70 mg/min, prior to the next discharge. The major improvements in plasma performance from these lithium depositions include: (1) plasma density reduction as a result of lithium deposition; (2) suppression of ELMs; (3) improvement of energy confinement in a low-triangularity shape; (4) improvement in plasma performance for standard, high-triangularity discharges; (5) reduction of the required HeGDC time between discharges; (6) increased pedestal electron and ion temperature; (7) reduced SOL plasma density; and (8) reduced edge neutral density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evidence for Langmuir oscillations and a low density cavity in the Venus magnetotail

We report the discovery of Langmuir oscillations in a very low plasma density region in the Venus magnetotail. These waves are observed more often at 30 kHz, but also at 5.4 kHz indicating densities as low as 0.3 cu cm in the central tail lobe. The Langmuir probe on board the Pioneer Venus Orbiter cannot resolve such a low plasma density. We use the magnetic field strength and the assumption of total pressure balance to infer the electron temperature as a test of the Langmuir wave interpretation. By investigating the spatial distribution of this wave activity we find that the plasma cavity is ordered in a coordinate system defined by the interplanetary magnetic field and is found at either side of the central tail current sheet.

Ho, C. M.↗

Evidence for Langmuir Oscillations and a Low Density Cavity in the Venus Magnetotail

We report the discovery of Langmuir oscillations in a very low plasma density region in the Venus magnetotail. These waves are observed more often at 30 kHz, but also at 5.4 kHz indicating densities as low as 0.3/cu cm in the central tail lobe. The Langmuir probe on board the Pioneer Venus Orbiter cannot resolve such a low plasma density. We use the magnetic field strength and the assumption of total pressure balance to infer the electron temperature as a test of the Langmuir wave interpretation. By investigating the spatial distribution of this wave activity we find that the plasma cavity is ordered in a coordinate system defined by the interplanetary magnetic field and is found at either side of the central tail current sheet.

Ho, C. M.↗

Plasma Photonics for the Control of Kilojoule Lasers

The main goal of this project was to develop plasma photonic devices (plasma lenses or ellipsoidal plasma mirrors (EPMs)) for controlling the focus of high-energy (kJ-class) laser systems. In order to defocus a kJclass laser beam, a plasma optic must produce a very specific plasma density profile. For a plasma lens, this profile must be peaked on axis and fall off parabolicly with radius. We developed four plasma-lens target designs that were predicted to yield the ideal plasma profile required for defocusing kJ-class laser beams. Particle-in-cell (PIC) simulations using the code OSIRIS were used to explore the design. The resulting plasma lens must also be underdense, which sets an upper limit on the solid density of the plasma-lens targets to ~ 1 mg/cm 3 or less. This low of a density is highly challenging to fabricate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evaporated Lithium Surface Coatings in NSTX

Two lithium evaporators were used to evaporate more than 100 g of lithium on to the NSTX lower divertor region. Prior to each discharge, the evaporators were withdrawn behind shutters, where they also remained during the subsequent HeGDC applied for periods up to 9.5 min. After the HeGDC, the shutters were opened and the LITERs were reinserted to deposit lithium on the lower divertor target for 10 min, at rates of 10-70 mg/min, prior to the next discharge. The major improvements in plasma performance from these lithium depositions include: (1) plasma density reduction as a result of lithium deposition; (2) suppression of ELMs; (3) improvement of energy confinement in a low-triangularity shape; (4) improvement in plasma performance for standard, high-triangularity discharges: (5) reduction of the required HeGDC time between discharges; (6) increased pedestal electron and ion temperature; (7) reduced SOL plasma density; and (8) reduced edge neutral density. (C) 2009 Elsevier B.V. All rights reserved

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗