Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PARAMAGNETISM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

The effect of annealing on the transformation and the microstructure of Mn{sub 1−x}Cr{sub x}CoGe alloys

In this work the effect of different thermal treatments on the transformation behavior of Mn{sub 1−x}Cr{sub x}CoGe alloys, with x = 0.15 and 0.20 has been analyzed. The changes in the transformation temperatures have been studied by differential scanning calorimetry (DSC). The results show that the structural transition temperature depends on the previous annealing. However, under the same heat treatment no significant change is observed on the transformation temperatures when replacing Mn by Cr. The microstructural evolution has been monitored using in-situ X-ray diffraction and transmission electron microscopy. The effect of an applied magnetic field on the transformation has been explored by SQUID magnetometry. Two different magnetic transitions are found: a first order paramagnetic (PM) to ferromagnetic (FM) corresponding to the transformation observed by calorimetry and a re-entrant spin glass to ferromagnetic transition. - Highlights: • The annealing conditions determine the magnetostructural transition. • A laminar microstructure along preferential planes observed by TEM • A RSG to ferromagnetic transition at low temperatures is detected.

36 MATERIALS SCIENCE↗

Characterization of low alloy ferritic steel–Ni base alloy dissimilar metal weld interface by SPM techniques, SEM/EDS, TEM/EDS and SVET

The interface region of welded A508–Alloy 52 M is characterized by scanning probe microscope (SPM) techniques, scanning electron microscopy (SEM)/energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM)/Energy Dispersive Spectroscopy (EDS) and scanning vibrate electrode technique (SVET). The regions along the welded A508–Alloy 52 M interface can be categorized into two types according to their different microstructures. In the type-I interface region, A508 and Alloy 52 M are separated by the fusion boundary, while in the type-II interface region, A508 and Alloy 52 M are separated by a martensite zone. A508, martensite zone and grain boundaries in Alloy 52 M are ferromagnetic while the Alloy 52 M matrix is paramagnetic. The Volta potentials measured by scanning Kelvin probe force microscopy (SKPFM) of A508, martensite zone and Alloy 52 M follow the order: V{sub 52} {sub M} > V{sub A508} > V{sub martensite}. The corrosion behavior of A508–Alloy 52 M interface region is galvanic corrosion, in which Alloy 52 M is cathode while A508 is anode. The martensite dissolves faster than Alloy 52 M, but slower than A508 in the test solution. - Highlights: • The A508–Alloy 52 M interface regions can be categorized into two types. • The chromium depleted region is observed along the Alloy 52 M grain boundary. • The Alloy 52 M grain boundaries which are close to the interface are ferromagnetic. • Martensite zone has lower Volta potential but higher corrosion resistance than A508.

36 MATERIALS SCIENCE↗

Characterization of mechano-thermally synthesized Curie temperature-adjusted La{sub 0.8}Sr{sub 0.2}MnO{sub 3} nanoparticles coated with (3-aminopropyl) triethoxysilane

This research aimed to synthesize nanostructured strontium-doped lanthanum manganite, La{sub 0.8}Sr{sub 0.2}MnO{sub 3} (LSMO), with its Curie temperature (T{sub c}) adjusted to the therapeutic range, through a mechanothermal route. In order to investigate the effect of heat treatment temperature and duration on the resulting crystallite size, morphology, magnetic behavior and Curie temperature, the starting powder mixture was milled in a planetary ball mill before being subsequently heat treated at distinct temperatures for different time lengths. The composition, morphology, and magnetic behavior were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED) and vibrating sample magnetometer (VSM). In addition, magnetic properties were further investigated using an alternating current (AC) susceptometer and thermo-magnetic analyzer. 20 h of milling produced a crystallite size reduction leading to a decrease in the heat treatment temperature of LSMO synthesis to 800 °C. Moreover, SEM analysis has shown the morphology of a strong agglomeration of fine nanoparticles. HRTEM showed clear lattice fringes of high crystallinity. The mean crystallite and particle size of 20-hour milled sample heat treated at 1100 °C for 10 h are relatively 69 and 100 nm, respectively. The VSM data at room temperature, indicated a paramagnetic behavior for samples heat treated at 800 °C. However, by increasing heat treatment temperature to 1100 °C, LSMO indicates a ferromagnetic behavior with well-adjusted Curie temperature of 320 K, suitable for hyperthermia applications. Also, reentrant spin glass (RSG) behavior has been found in heat treated samples. The particles are coated with (3-aminopropyl) triethoxysilane (APTES) for biocompatibility purposes; Fourier transform infrared spectroscopy (FTIR) and thermo-gravimetric analysis (TGA) are used for further confirmation of APTES coating. - Highlights: • La{sub 0.8}Sr{sub 0.2}MnO{sub 3} nanoparticles were synthesized via a mechanothermal route. • We report a significant reduction in the heat treatment temperature. • The Curie temperature was tuned within the therapeutic range. • The particles were coated with (3-aminopropyl) triethoxysilane for biocompatibility purposes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Role of Eu{sup 2+} on the blue‐green photoluminescence of In{sub 2}O{sub 3}:Eu{sup 2+} nanocrystals

Blue‐green light emitting undoped and europium doped indium oxide nanocrystal were synthesized by simple precipitation method. X-ray diffraction (XRD) pattern confirmed the cubic phase of undoped and europium doped samples. Further, transmission electron microscopy (TEM), scanning electron microscopy (SEM) , energy dispersive analysis of X-rays (EDAX), Fourier transform infra-red (FT-IR), photoluminescence (PL), electron paramagnetic resonance (EPR) studies were performed to characterise the samples. PL analysis of the samples is the core of the present research. It includes excitation, emission and CIE (Commission Internationale de l’e´ clairage) studies of the samples. On doping europium to In{sub 2}O{sub 3} lattice, ln{sup 3+} site is substituted by Eu{sup 2+} thereby increasing the concentration of singly ionized oxygen vacancy and hence blue–green emission from the host is found to increase. Further, this increase in blue–green emission after doping may also be attributed to 4f → 5d transitions of Eu{sup 2+}. However, the blue–green PL emission is found to decrease after an optimum dopant concentration (Eu{sup 2+} = 4%) due to luminescence and size quenching. CIE co-ordinates of the samples are calculated to know colour of light emitted from the samples. It suggests that this blue–green light emitting In{sub 2}O{sub 3}: Eu{sup 2+} nanocrystals may find application in lighting such as in generation of white light. - Highlight: • XRD and TEM study confirms the synthesis of cubic doped and europium doped nanocrystals. • EPR study reveals the doped europium is in + 2 oxidation state. • Enhance PL emission intensity of host material due to increase in singly ionized oxygen vacancy and 4f–5d transitions of Eu{sup 2+} • CIE co-ordinates suggest the blue–green colour of the samples.

36 MATERIALS SCIENCE↗

Influence of crystallographic orientation and applied magnetic field on domain structure in duplex stainless steel studied using magnetic force microscopy

Highlights: • Ferrite phase in a duplex stainless steel consists of stripe type domains. • Domain contrast decreases with deviation of plane normal from <100>. • Domain width increases with deviation of plane normal from <100>. • Domain alignment with applied field observed along <100> directions. • Grain boundary stray field is a function of misorientation between grains. - Abstract: The paper investigates the local micro-magnetization behavior in duplex stainless steel (DSS) using magnetic force microscopy (MFM). DSS has equal amount of austenite phase in ferrite matrix. The MFM imaging clearly differentiates ferrite phase (ferromagnetic) from the austenite phase (paramagnetic) due to the maze type magnetic domains present in the ferrite phase. The magneto crystalline anisotropic effect on the domain structure is discussed with the support of electron backscatter diffraction (EBSD) measurements. The MFM phase contrast and domain width are correlated with the orientation of surface normal with respect to the easy axis of magnetization (<100>). The influence of external magnetic field (±127 kA/m) application on the domain structure is studied as a function of the grain orientation and the leakage field at the grain boundaries is analyzed based on the mis-orientation between the grains.

36 MATERIALS SCIENCE↗

Extraordinary role of Ce-Ni elements on the electrical and magnetic properties of Sr-Ba M-type hexaferrites

The structural, electrical and magnetic behavior of Sr{sub 0.5}Ba{sub 0.5-x}Ce{sub x}Fe{sub 12-y}Ni{sub y}O{sub 19} (where x = 0.00-0.10; y = 0.00-1.00) hexaferrite nanomaterials are reported in this paper. The structural analysis indicates that the Ce-Ni doped Sr-Ba M-type hexaferrite samples synthesized by the co-precipitation method are stoichiometric, single magnetoplumbite phase with crystallite sizes in the range of 35-48 nm. The dc-electrical resistivity of the pure Sr-Ba hexaferrite is enhanced to almost 10{sup 2} times by doping with Ce-Ni contents of x = 0.06; y = 0.60. The dielectric constant and dielectric loss tangent decrease to values {approx}14 and <0.2, respectively, by increasing the frequency up to 1 MHz. Small relaxation peaks at frequencies >10{sup 5} Hz are observed for the samples with Ce content of x > 0.06. The values of saturation magnetization increase from 66.32 to 84.33 emu/g and remanance magnetization from 42.64 to 56.01 emu/g but coercivity decreases from 2.85 to 1.59 kOe by substitution of Ce-Ni. Sharp ferri-paramagnetic transition is observed in the samples, which is confirmed by DSC results. Ce-Ni substitution acts to reduce the electron-hopping between Fe{sup 2+}/Fe{sup 3+} ions and also improves the magnetic properties. These characteristics are desirable for their possible use in microwave and chip devices.

36 MATERIALS SCIENCE↗

Investigation of antiperovskite Mn{sub 3}CuN{sub x} film prepared by DC reactive magnetron sputtering

Antiperovskite Mn{sub 3}CuN{sub x} film was prepared by dc reactive magnetron sputtering. It is the first time to report an antiperovskite ternary nitride film. The composition and crystal structure were characterized by energy dispersive spectroscope (EDS), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). From the XRD pattern, it displays a (1 0 0) preferential orientation. A comparative study on the properties of Mn{sub 3}CuN{sub x} film and the bulk sample was presented. The film exhibits an antiferromagnetic to paramagnetic transition around 135 K, similar with the bulk sample. With temperature, the resistivity of the film shows semiconductor-like behavior throughout the measured temperature region, whereas there is an abrupt drop around the magnetic transition for the bulk. The variable temperature XRD results indicate that the film did not display any structure transition and shows a normal linear thermal expansion property around the magnetic transition.

36 MATERIALS SCIENCE↗

Phase stability study of Bi{sub 0.15}Sr{sub 0.85-x}Ae{sub x}CoO{sub 3-{delta}} (x = 0 and Ae = Ba{sub 0.28}; Ca{sub 0.17}) perovskites by in-situ neutron diffraction

The oxygen deficient perovskites, Bi{sub 0.15}Sr{sub 0.85-x}Ae{sub x}CoO{sub 3-{delta}}, x = 0 and Ae{sub x} = Ba{sub 0.28}, Ca{sub 0.17}, were studied with in-situ neutron powder diffraction and combined TGA/DSC in order to investigate their behaviour at elevated temperatures in oxidising conditions. The phase stability of the I4/mmm supercell structure adopted by Bi{sub 0.15}Sr{sub 0.85}CoO{sub 3-{delta}} is shown to be dependent on temperature and the oxygen content of the phase, with three structural events, at T {approx} 250, 590 and 880 {sup o}C, detected. The first transition occurs as the perovskite supercell vanishes due to oxygen absorption; the second transition is also associated with oxidation and involves the decomposition of the perovskite phase via an exothermic process to yield a dominant hexagonal phase. Finally, at T {approx} 900 {sup o}C the perovskite phase re-forms. For the Ba and Ca containing materials the decomposition to the hexagonal phase occurs at T {approx} 600 {sup o}C and {approx} 650 {sup o}C respectively. The presence of Ca at the A-site is found to stabilise the I4/mmm supercell structure in the range RT - 650 {sup o}C. The antiferromagnetic to paramagnetic transitions occur at T{sub N} {approx} 250 {sup o}C, T{sub N} {approx} 175 {sup o}C and T{sub N} {approx} 145 {sup o}C for the samples with Ae{sub x} = Ba{sub 0.28}, x = 0 and Ae{sub x} = Ca{sub 0.17}, respectively.

36 MATERIALS SCIENCE↗

The magnetic properties of Bi{sub 0.9}Ba{sub 0.1}Fe{sub 0.81}M{sub 0.09}Ti{sub 0.1}O{sub 3} solid solutions (M = Co, Mn, Sc, Al)

Graphical abstract: In Bi{sub 0.9}Ba{sub 0.1}Fe{sub 0.9}Ti{sub 0.1}O{sub 3} solid solution, both magnetic ions (Co{sup 3+}, Mn{sup 3+}) and nonmagnetic ions (Sc{sup 3+}, Al{sup 3+}) were chosen to partially replace Fe{sup 3+}. Their magnetic properties were carefully investigated. Figures show M-H loops at RT of Co{sup 3+} doped sample (left) and Sc{sup 3+} substituted solid solution (right). Highlights: {yields} The electrical resistivity of BiFeO{sub 3} is enhanced by forming solid solution with BaTiO{sub 3}. {yields} We replace Fe{sup 3+} by both magnetic ions Co{sup 3+}, Mn{sup 4+} and nonmagnetic ions Sc{sup 3+}, Al{sup 3+} to investigate the magnetic properties. {yields} Structure-magnetic property relationship has been established by Rietveld refinement. -- Abstract: Solid solutions with general formula Bi{sub 0.9}Ba{sub 0.1}Fe{sub 0.81}M{sub 0.09}Ti{sub 0.1}O{sub 3} (M = Co, Mn, Sc, Al) together with parental Bi{sub 0.9}Ba{sub 0.1}Fe{sub 0.9}Ti{sub 0.1}O{sub 3} were prepared by the traditional solid state reaction method. Their structural, room temperature magnetic, and dielectric properties were investigated. X-ray diffraction analysis indicated that all samples maintained original R3c space group. M-H hysteresis loop of Co{sup 3+} doped sample saturated at an applied field of 1 T with spontaneous magnetization of 1.735 emu/g, while Mn{sup 4+} substitution enhanced the magnetization of Bi{sub 0.9}Ba{sub 0.1}Fe{sub 0.9}Ti{sub 0.1}O{sub 3} less strongly; addition of Sc{sup 3+} helped decrease magnetic coercive field while Al{sup 3+} modified sample exhibited paramagnetic M-H hysteresis loop. Differential scanning calorimetry was applied to determine the Neel temperature (T{sub N}) and the T{sub N} for undoped, Co{sup 3+}, Mn{sup 4+}, Sc{sup 3+}, Al{sup 3+} doped solid solutions were 318.1, 324.3, 335.7, 293.9 and 295.8 respectively. Sc{sup 3+} substitution had little influence on the dielectric properties of Bi{sub 0.9}Ba{sub 0.1}Fe{sub 0.9}Ti{sub 0.1}O{sub 3} while Al{sup 3+} doping improved its dielectric constant. In contrast, Co{sup 3+}, Mn{sup 4+} doped samples showed decreased permittivity but inhibited tan {delta} at frequencies larger than 30 kHz.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis and magnetic properties of {alpha}-MnO{sub 2} nanowires

Highlights: Black-Right-Pointing-Pointer {alpha}-MnO{sub 2} nanowires were synthesized through the hydrothermal method. Black-Right-Pointing-Pointer Ferromagnetism was observed in the {alpha}-MnO{sub 2} nanowires at 5 K. Black-Right-Pointing-Pointer The N{sub 2} adsorption-desorption experiment shows that surface area of {alpha}-MnO{sub 2} nanowires is 160.4 m{sup 2} g{sup -1}. -- Abstract: In the present study, one-dimensional (1D) {alpha}-MnO{sub 2} nanowires with width of 50-60 nm, length about several micrometers have been successfully prepared under hydrothermal conditions in the presence of sodium carboxymethyl cellulose. The samples were characterized by X-ray diffraction, scanning electron microscope, superconducting quantum interference device and N{sub 2} adsorption-desorption experiment. The magnetic measurement reveals that the {alpha}-MnO{sub 2} nanowires exhibit a ferromagnetic behavior at 5 K and a paramagnetic behavior at 300 K. The N{sub 2} adsorption-desorption experiment shows that surface area is 160.4 m{sup 2} g{sup -1}, which is even larger than those of mesoporous nanostructures. At the same time, the possible formation mechanism for the formation of {alpha}-MnO{sub 2} nanowires has been proposed according to the experimental results.

36 MATERIALS SCIENCE↗

Synthesis, structural characterization and Mössbauer study of LnV{sub 0.5}Fe{sub 0.5}O{sub 3} perovskites (Ln = Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho and Er)

Graphical abstract: Mössbauer spectra taken at 200 K for the Y(V{sub 0.5}Fe{sub 0.5})O{sub 3} orthoferrivanadate synthesized by arc-melting. Highlights: ► LnFe{sub 0.5}V{sub 0.5}O{sub 3} were synthesized by the first time for most of the rare-earth elements. ► These orthoferrivanadates crystallize metastably with the perovskite structure. ► Iron and vanadium are trivalent stabilized in these solid solutions. ► The Mössbauer quadrupolar splitting is correlated with the tolerance factor. ► Below 100 K, these perovskites undergo a crystallographic phase transformation. -- Abstract: Perovskites LnV{sub 0.5}Fe{sub 0.5}O{sub 3} (Ln = Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho and Er) were synthesized by rapid solidification from arc-melted samples and characterized by the study of their crystal structure and hyperfine properties. These metastable solid solutions crystallized in the Pbnm symmetry, with the iron and vanadium cations randomly distributed in the transition metal octahedral sites. Depending on the lanthanide present at the A site of the perovskite, iron is present with two valences (i.e., Fe{sup 3+} and Fe{sup 2+}). The volume of the unit cell for these perovskites increases linearly with the lanthanide ionic radius, as the perovskite approaches its ideal structure. At room temperature, the quadrupolar splitting of the trivalent paramagnetic Mössbauer component works as an indirect measurement for the Goldshmidt tolerance factor. Close to or below 100 K, these perovskites undergo a crystallographic phase transformation, probably due to orbital ordering of the V{sup 3+} cations, originating two different magnetic iron sites.

36 MATERIALS SCIENCE↗

Role of manganese in red long-lasting phosphorescence of manganese-doped diopside for in vivo imaging

Highlights: ► Long-lasting phosphorescence of CaMgSi{sub 2}O{sub 6}:Mn is studied for bioimaging application. ► CaMgSi{sub 2}O{sub 6}:Mn yields orange and red luminescence of Mn{sup II}{sub Ca} and Mn{sup II}{sub Mg}, respectively. ► Red Mn{sup II}{sub Mg} emission dominates long-lasting phosphorescence spectra. ► Mn mainly substitutes Mg. ► Mn{sup II}{sub Mg} plays the role of hole trap in the persistent luminescence mechanism. - Abstract: Materials with red long-lasting phosphorescence, such as Mn{sup II}-doped diopsides, can be used for small animal in vivo imaging. CaMgSi{sub 2}O{sub 6}:Mn powders with various amounts of Mn were prepared by sol–gel to investigate their long-lasting phosphorescence mechanism. X-ray diffraction, X-ray absorption fine and near-edge structure and electron paramagnetic resonance showed that manganese is quantitatively introduced in the structure as Mn{sup II}. Most of the Mn doping ions substitute Mg and possess a highly elongated octahedral environment. While photoluminescence and X-ray excited optical luminescence spectra show both orange (585 nm) and red (685 nm) {sup 4}T{sub 1} ({sup 4}G) → {sup 6}A{sub 1} ({sup 6}S) emission of Mn{sup II}{sub Ca} and Mn{sup II}{sub Mg}, respectively, Mn{sup II}{sub Mg} red emission dominates long-lasting phosphorescence and thermally stimulated luminescence spectra. These results point to Mn{sup II}{sub Mg} as the preferential hole trap and recombination center in the long-lasting phosphorescence mechanism. An intense persistent red emission suitable for in vivo imaging probes is obtained for the highest nominal Mn content (7.5%)

36 MATERIALS SCIENCE↗

Crystal structure and magnetic properties of Pr- and Ti-substituted La{sub 2}RuO{sub 5}

Highlights: • Synthesis of polycrystalline Pr and Ti co-substituted La{sub 2}RuO{sub 5} with soft chemistry. • Investigation of structure–property relationship of the dimerization transition. • Additive behavior of structural changes caused by either Pr or Ti substitution. • Additive behavior of ht-phase paramagnetism of Pr and Ti substitution. • Additive influence of Pr and Ti substitution on the dimerization transition. - Abstract: Polycrystalline samples of Pr- and Ti-substituted La{sub 2}RuO{sub 5} were prepared applying a soft-chemistry route based on the thermal decomposition of citrate-stabilized precursors. The simultaneous substitution on the La-sites by Pr and on the Ru-sites by Ti results in samples of the composition La{sub 2−x}Pr{sub x}Ru{sub 1−y}Ti{sub y}O{sub 5} with 0 ≤ x ≤ 0.75 and 0 ≤ y ≤ 0.4. The crystal structures of these compounds were analyzed by Rietveld refinement of powder X-ray diffraction patterns. For pure La{sub 2}RuO{sub 5} a structural transition from a monoclinic room-temperature modification to a triclinic low-temperature structure was found at 161 K. This structural change is linked to a low-temperature long-range ordered spin-singlet ground state formed by Ru{sup 4+} spin-moments. Both the structural transition and the formation of the singlet ground state become progressively suppressed with higher Ti contents, while the Pr substitution has only a minor influence on the dimerization. The behavior of the Curie–Weiss temperatures can be explained assuming two almost independent magnetic sublattices corresponding to the ruthenium and the rare-earth ions, respectively. For all investigated properties, i.e. crystal structure, magnetic susceptibilities, and dimerization temperature T{sub d}, a completely additive behavior of the effects of Pr-substitution and Ti-substitution is observed.

36 MATERIALS SCIENCE↗

Reinforcement of double-exchange ferromagnetic coupling by Ru in La{sub 1.24}Sr{sub 1.76}Mn{sub 2-y}Ru{sub y}O{sub 7} manganite system

Highlights: • Effect of Mn-site doping by Ru has been studied in La{sub 1.24}Sr{sub 1.76}Mn{sub 2-y}Ru{sub y}O{sub 7}. • Electrical resistance, magnetoresistance and magnetic properties were measured. • Ru substitution enhances the ferromagnetism and metallicity. • Results were interpreted by the ferromagnetically coupled Ru with Mn ions in Mn–O–Ru network. - Abstract: The effect of Mn-site doping on magnetic and transport properties in the bilayer manganites La{sub 1.24}Sr{sub 1.76}Mn{sub 2-y}Ru{sub y}O{sub 7} (y = 0.0, 0.04, 0.08 and 0.15) has been studied. The undoped compound La{sub 1.24}Sr{sub 1.76}Mn{sub 2}O{sub 7} exhibits a ferromagnetic metal to paramagnetic insulator transition at T{sub C} = 130 K and the substitution of Ru shifts the transition temperatures to higher temperature values. The increased metal–insulator transition by Ru substitution, obtained from temperature dependence of resistivity measurements, indicates that the Ru substitution enhances the metallic state at low temperature regime and favours the Mn–Ru pairs in the Ru doped samples. Moreover, the activation energy values calculated from the temperature dependence of resistivity curves suggest that the Ru substitution weakens the formation of polarons. The increased magnetoresistance ratio from 108% to 136% by Ru substitution, measured at 5 K, points out that the Ru substitution also enhances the inter-grain tunneling magnetoresistance. Thus, the ferromagnetic order and metallic state in La{sub 1.24}Sr{sub 1.76}Mn{sub 2}O{sub 7} system have been enhanced by the presence of Ru in the Mn-site. These reinforcements of ferromagnetic metallic state and magnetoresistance have been interpreted by the ferromagnetically coupled high spin states of Ru with Mn ions in the Mn–O–Ru network.

36 MATERIALS SCIENCE↗

Nickel/carbon core/shell nanotubes: Lanthanum nickel alloy catalyzed synthesis, characterization and studies on their ferromagnetic and lithium-ion storage properties

Highlights: • Ni/CNTs core/shell structure was synthesized using LaNi{sub 5} alloy catalyst by CVD. • The magnetic and lithium-ion storage properties of Ni/CNTs structure were studied. • The specific Ni/CNTs structure shows strong ferromagnetic property with large coercivity value of 446.42 Oe. • Ni/CNTs structure shows enhanced electrochemical performance in terms of stable capacity and better rate capability. - Abstract: A method was developed to synthesize ferromagnetic nickel core/carbon shell nanotubes (Ni/CNTs) by chemical vapor deposition using Pauli paramagnetic lanthanum nickel (LaNi{sub 5}) alloy both as a catalyst and as a source for the Ni-core. The Ni-core was obtained through oxidative dissociation followed by hydrogen reduction during the catalytic growth of the CNTs. Transmission electron microscopy (TEM), selected area electron diffraction (SAED) and X-ray diffraction (XRD) analyses reveal that the Ni-core exists as a face centered cubic single crystal. The magnetic hysteresis loop of Ni/CNTs particle shows increased coercivity (446.42 Oe) than bulk Ni at room temperature. Furthermore, the Ni/CNTs core/shell particles were investigated as anode materials in lithium-ion batteries. The Ni/CNTs electrode delivered a high discharge capacity of 309 mA h g{sup −1} at 0.2 C, and a stable cycle-life, which is attributed to high structural stability of Ni/CNTs electrode during electrochemical lithium-ion insertion and de-insertion redox reactions.

36 MATERIALS SCIENCE↗

Investigations of the optical and EPR properties of LiGa{sub 5}O{sub 8}:Cr{sup 3+} phosphor

Highlights: • Cr{sup 3+} doped LiGa{sub 5}O{sub 8} phosphor was synthesized by solution combustion synthesis. • Morphological studies show the non-uniform distribution of particles. • Photoluminescence spectra of Cr{sup 3+} doped LiGa{sub 5}O{sub 8} showed the characteristic Cr{sup 3+} peaks. • EPR spectrum showed Cr{sup 3+} ions in tetragonally distorted octahedral symmetry. - Abstract: Red emitting LiGa{sub 5}O{sub 8} doped with Cr{sup 3+} ions has been prepared by a low temperature solution combustion route. The as-prepared phosphor was studied using X-ray diffraction and scanning electron microscopic techniques. The optical spectrum exhibits two broad bands characteristic of Cr{sup 3+} ions in an octahedral symmetry. Upon excitation at 590 nm, the material displays narrow red emission line centered at 715 nm due to the {sup 2}E{sub g} → {sup 4}A{sub 2g} transition of Cr{sup 3+} ions. Electron paramagnetic resonance analyses of the sample confirm the presence of Cr{sup 3+} in the LiGa{sub 5}O{sub 8} matrix.

36 MATERIALS SCIENCE↗

Control of ferromagnetism in (In{sub 0.9}Fe{sub 0.1}){sub 2}O{sub 3} via F doping of electron carriers

Highlights: • F doping was achieved by a process of low temperature reaction with PVDF. • RTFM was obtained in the F-doped (In{sub 0.9}Fe{sub 0.1}){sub 2}O{sub 3.} • Magnetism and electric resistivity can be controlled by the content of doped F. • The FM can be ascribed to a long range exchange interaction induced by carriers. - Abstract: Ferromagnetism in (In{sub 0.9}Fe{sub 0.1}){sub 2}O{sub 3} was obtained by fluorine (F) doping. The ferromagnetism can be controlled by changing the electron carrier concentration via F doping. With increasing the F concentration, the electron carrier concentration increases, and samples undergo a paramagnetic insulator to ferromagnetic metal transition. For the ferromagnetic samples, the anomalous Hall effect (AHE) was observed. These results indicate that electron carriers play an important role in inducing the ferromagnetism.

36 MATERIALS SCIENCE↗

Structural, magnetic, and electrochemical properties of LiMn{sub 1−x}Ni{sub x}PO{sub 4}

Highlights: • LiMn{sub 1−x}Ni{sub x}PO{sub 4} nanomaterials were synthesised via a hydrothermal route up to x = 0.45. • Structure and elemental analyses show solid solution behaviour obeying Vegard's law. • Magnetic properties reflect the substitution of Mn{sup 2+} by Ni{sup 2+}. • Mn{sup 2+/3+} reduction potential rises with increasing nickel concentration. - Abstract: A solid solutions series of LiMn{sub 1−x}Ni{sub x}PO{sub 4} nanomaterials with 0 ≤ x ≤ 0.45 was produced by a low-temperature microwave-assisted hydrothermal process. The materials have been systematically studied regarding structure, morphology, magnetism, and electrochemical properties. The lattice parameters in the orthorhombic olivine structure obey Vegard's law and linearly depend on x. Similarly, the static magnetisation reflects the decrease of the transition metal paramagnetic moment upon substitution of Mn{sup 2+} by Ni{sup 2+}. At low temperatures, antiferromagnetic long range order appears for all Ni-concentrations. The potential of the Mn{sup 2+/3+} redox couple is found to linearly increase with x. This is explained by a larger electronegativity of Ni{sup 2+} as compared to Mn{sup 2+} and associated changes in the covalency of the Mn-O bond.

36 MATERIALS SCIENCE↗