SEARCH · Engineering Papers

Results for “ORNL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Development of a Direct Neutral Density Diagnostic for Fusion Edge Plasmas

As magnetically confined plasmas progress towards ignition and long pulse experiments, measurement and control of the neutral density in the plasma edge has become a critical issue for stability, formation of transport barriers, and fueling. Recent experiments by our research group have demonstrated that is possible to use two-photon absorption laser induced fluorescence (TA-LIF) to directly measure the density of neutral hydrogen in helicon sources and in the HIT-SI3 spheromak. While those experiments validated key elements of a diagnostic system that would enable similar measurements in tokamak plasmas, they did not fully address the issue of performance optimization in the presence of intense background light at the fluorescence wavelength and they also identified a number of other issues that must be resolved before successful TALIF neutral density measurements in a tokamak are likely to be achieved. Additional specific concerns raised during design reviews with the leadership of the DIII-D tokamak facility included: the minimum detection threshold for this TALIF diagnostic (currently ~ 5 x 10 15 m -3 ) and the rate at which neutral density measurements could be obtained. Improving the system performance to reduce the minimum detection threshold and demonstrating a faster rate of density determination are required to advance this diagnostic to the level where it could be considered for implementation on a major tokamak facility in the USA. The key issues that will be addressed through additional technological development are: validation of a new, chromatic aberration-free, xenon calibration scheme; increasing the output power of the laser; and suppression of background emission at the fluorescence wavelength through optimization of the collection optics and gating of the photomultiplier detector with a goal of obtaining a minimum detection threshold of 5 x 10 14 m -3 . Another key technological development, so far only tested in helicon source experiments, is the validation of Doppler-free TALIF as a means of obtaining higher speed, calibrated, neutral density measurements in tokamak-like conditions at the full cadence of the pulsed TALIF laser. In this work, we propose to complete these technological advancements through installation and testing of our prototype TALIF system on the proto-MPEX experiment at Oak Ridge National Laboratory (ORNL). The proto-MPEX facility will provide plasma conditions similar to the edge plasma of a major tokamak experiment but with pulse lengths and pulse repetition rates ideally suited for extensive development of a TALIF neutral density diagnostic. Measurement of the absolute neutral density in the edge of a magnetically confined plasma is necessary for plasma density control; calculation of charge-exchange power losses; control of plasma-wall interactions; determination of the braking of plasma flow; determination of the fuel mixture in deuterium-tritium plasma; and understanding the dynamics of the divertor region in the plasma edge. In terms of potential impact on the worldwide fusion program, we note that in burning plasma experiments, such as ITER, a 100 mJ/pulse Doppler-free TALIF diagnostic should be capable of directly measuring the deuterium/tritium (D/T) isotope ratio in the outer 0.5 to 1.0 m of the plasma radius. The D/T ratio is a critically important parameter for the control and optimization of burning plasmas. Therefore, development of the diagnostic system proposed here is also relevant to long-term US participation in diagnostic development for large tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

MOSCATO Solver Development and Integration Plan

During FY21, we conducted ongoing development work for the MOSCATO (Molten Salt Chemistry and Transport) solver. The code development work primarily consisted of transitioning capabilities from the original version of the solver, which was written in OpenFOAM, into Nek5000. In doing so, a fast, highly parallelizable solver was created that is capable of complex chemistry and corrosion simulations for engineering-scale molten salt systems. The Nek5000 version of MOSCATO is now fully featured and capable of higher-fidelity simulations than were previously possible. Demonstration cases including a thermal convection loop have been simulated to test these new capabilities. Although capable of large-scale simulations, MOSCATO is not well-suited to parametric studies of complete reactor geometries. These types of simulations are instead better handled by reduced-order modeling codes such as ORNL’s Mole code. Reduced-order simulation tools like Mole, however, are dependent on high fidelity correlations to account for complex, coupled three-dimensional phenomena that they do not directly simulate. Tools such as MOSCATO must therefore be used to create these correlations, as suitable empirical relationships are not available for most molten salt systems. Toward that end, we used the Nek-derived version of MOSCATO to create new mass transfer correlations for three relevant cases including tubular, tube bank, and subchannel geometries. These new correlations are more accurate than any existing ones and can be readily integrated into any reduced-order modeling tools that are targeting full-scale MSR simulations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2022

Tools for Visualization and Analysis of Small-Angle Neutron Scattering Data: Descriptions and Examples

A great deal of progress has been made in improving the data reduction experience for the SANS instruments at the SNS and HFIR at ORNL. The existing data reduction toolset, drtsans, makes it possible to integrate data analysis and visualization tools into the data reduction scripts, thereby providing new opportunities for more automated data processing for users of the SNS and HFIR. Here, the first set of tools developed is described with usage examples.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2022

Development of an Open-source Alloy Selection and Lifetime Assessment Tool for Structural Components in CSP

Lack of sufficient data on high temperature mechanical and corrosion behavior of structural materials is a huge barrier in the technological maturity of current and future Concentrating Solar Power (CSP) technologies. Rapid development and selection of materials cannot be achieved by expensive and time-consuming acquisition of experimental data. The goal of the proposed work is development of an open-source alloy selection and lifetime prediction tool that will integrate validated physics-based models to describe influence of temperature, alloy composition, environment and component geometry (thickness) on mechanical and corrosion behavior of Ni and Fe-based alloys employed in molten salts/sCO 2 heat exchangers. This one-year project leveraged the extensive dataset on the creep\corrosion behavior of candidate materials generated at ORNL through past projects and input from current collaborations with industrial partners. Based on previous experience and the feedback provided by industry (Brayton Energy and Echogen), three candidate materials of interest, Ni-based alloys 740H, 282 and 625 and application-specific operating conditions (max. temperature of 730 °C and stress of 150 MPa) were identified for the heat exchanger. An extensive corrosion and creep dataset was assimilated for the relevant operating conditions and was supported by detailed characterization of about 100 metallographic cross-sections. The corrosion dataset consisted of scanning electron microscopy images (secondary electron and backscatter electron), measured concentration profiles of alloying elements using energy dispersive X-ray spectroscopy (EDS), widths of denuded zones (dissolution of strengthening phases) and depths of attack in molten KCl-MgCl 2 mixtures using image analyses. The creep dataset comprised of creep rupture data and creep strain curves (for 740H and 282). Coupled thermodynamic-kinetic microstructure-based models were employed to predict the stress-corrosion induced compositional and phase evolutions in the alloy during operation under the identified operating conditions. Reduced order models were developed from advanced physics-based models and were integrated in a user-friendly alloy selection tool. The corrosion model was able to predict the time to a critical Cr concentration at the oxide/alloy interface (chemical lifetime) within ±10% (1 standard deviation) of typical statistical variation in corrosion tests and EDS measurement errors (±0.5 wt%). The initial scope of the project was limited to predict creep rupture times (Larson-Miller parameter). Based on the input provided by industry, the mechanical lifetime of the heat exchanger is governed by accumulated creep strains (2%) rather than creep rupture. To be able to predict the times to specific creep strains, a more extensive creep model development was undertaken largely beyond the initial scope of the project. The continuum damage mechanics creep model was able to predict times to 2% creep strain, t 2% with an accuracy of ±500h. Ultimately, a screening protocol for SiC was generated to demonstrate the pathway for integration of one of the currently immature materials from a commercial adoption standpoint in the current material evaluation tool. The modeling tool developed here is accessible to the science community and stakeholders and lays the foundation for methods that will enable a rapid evaluation of optimum materials for CSP applications and reliable prediction of material degradation thereby considerably reducing operational costs, improving reliability and increasing overhaul intervals. However, the complete potential of such a tool to include a wider range of materials and test conditions can only be realized with a more concentrated combined experimental-characterization-computation effort.

14 SOLAR ENERGY↗

DOE OSTI2021

Experimental Plan for the Vermiculite Study

Homes in which vermiculite, which can contain asbestos, is present are often deferred under the DOE Weatherization Assistance Program (WAP) because of uncertainty in how to safely weatherize such homes from a client and worker perspective and the potential costs associated with alternative approaches. Recognizing this situation, the Department of Energy (DOE) tasked the Oak Ridge National Laboratory (ORNL) to perform a research project that scientifically identifies the asbestos exposure risks in weatherizing homes with existing vermiculite insulation. Current approaches being used by Grantees and Subgrantees to weatherize homes with existing vermiculite insulation were identified as part of the development of this experimental plan based on a review of Grantee Health and Safety Plans and communications with weatherization program staff from seven states. Other than deferral, these approaches include the following:1.) Abating (i.e., removing) the existing vermiculite using funding sources other than WAP (e.g., state funds, utility funds, the Zonolite Attic Insulation Trust Fund, and possibly homeowner contributions) because abatement is not allowed using WAP funds per Weatherization Program Notice (WPN) 17-7. 2.) Weatherizing the house as normal after testing reveals that the vermiculite contains less than 1% asbestos. 3.) Avoiding areas of the house where vermiculite is installed and weatherizing the remaining areas of the house as normal. 4.) Encapsulating the existing vermiculite insulation in an attic by blowing cellulose or other insulation over it. 5.) Weatherizing the areas of the house where vermiculite is installed using unique/alternative approaches developed specifically for that house. Blower door testing is also impacted by the presence of vermiculite due to the concern of bringing asbestos fibers into the space. Some states address this by performing pressurized blower door tests, whereas other states prohibit blower door testing entirely when vermiculite is present. This research project will focus on gathering data on home occupant and weatherization worker exposures to asbestos before, during, and/or after the weatherization of the homes containing vermiculite insulation using five of the six approaches identified above. Abatement of the existing vermiculite insulation will not be studied because it is not allowed using WAP funding per WPN 17-7 and, thus, is not a sustainable approach for WAP.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Thermal Property Characterization of Molten Salt Reactor–Relevant Salts

The thermochemical and thermophysical properties of molten salt systems are necessary input for the design, licensing, and deployment of molten salt reactor concepts. The thermochemical and thermophysical property measurement capabilities being used and developed at Oak Ridge National Laboratory (ORNL) include liquid density, volumetric thermal expansion, viscosity, vapor pressure, phase behavior, and heat capacity and thermal conductivity measurement capabilities. Properties of eutectic LiF-NaF-KF (FLiNaK) and NaCl-KCl are being measured to validate the measurement techniques to be used to provide data to reactor developers and to better quantify the uncertainty of measurements. This report summarizes the status of thermal conductivity, viscosity, specific heat capacity, and density. A method for property estimation using Redlich Kister expansion is also described. This technique will be used to help validate measured properties and to guide future experiments by targeting mixtures or components for which data are uncertain or lacking.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2020

Hydrogen Diffusivity Measurements of YH 1.87 Moderator Material with Incoherent Quasielastic Neutron Scattering

Yttrium hydride is an optimal choice of moderator material for thermal neutron spectrum reactors requiring small core volumes. The Transformation Challenge Reactor (TCR) program at Oak Ridge National Laboratory (ORNL) aims to develop an additively manufactured microreactor core by leveraging recent advances in materials, manufacturing, data analytics, and high-fidelity modeling and simulation. Yttrium hydride was selected as the moderator material for TCR due to its high moderating power, which enables the spatially efficient reactor design and thermal stability that is superior when compared with zirconium hydride. Hydrogen desorption from yttrium hydride is expected at elevated temperatures, posing safety and performance concerns. As a lifetime component in advanced reactors, appropriate strategies to mitigate hydrogen release from yttrium hydride over long-term reactor operation are required. Understanding hydrogen mobility in yttrium hydride provides the scientific basis for developing a hydrogen barrier for hydride moderator and predicting the hydrogen redistribution within the material during various operational conditions. This study investigated the hydrogen motion in YH 1.87 as a function of temperature ranging from 200 to 1,173 K using incoherent quasielastic neutron scattering (IQNS) at the Spallation Neutron Source (SNS). The results are presented and discussed in terms of hydrogen self-diffusion coefficients, activation energy for translational hydrogen motion, and hydrogen jump distances. Based on the IQNS data, YH 1.87 is found to be stable at high temperatures with no translational H motion below 1,023 K within the IQNS detection limits. In the temperature range of 1,073–1,173 K, hydrogen diffusivity in YH 1.87 is $D = 4.57 X 10^{⁻3} [m^2/s] exp (⁻\frac{1.73[eV]}{RT}$). The hydrogen concentration’s dependence on hydrogen diffusivity is also discussed in this report.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2022

SMALE: Enhancing Scalability of Machine Learning Algorithms on Extreme-Scale Computing Platforms

Deployment and execution of machine learning tasks on extreme-scale computing platforms face several significant technical challenges: 1) High computing cost incurred by dense networks – The computing workload of deep networks with densely-connected topology increases rapidly with the network size, imposing a non-scalable computing model of extreme-scale computing platforms; 2) Non-optimized workload distribution – Many advanced deep learning algorithms, e.g., sparsification and irregular net-work topology, produce very unbalanced workload distribution on extreme-scale computing platforms. The computation efficiency is greatly hindered by the incurred data and computation redundancies as well as long tails of the node with extensive workload; 3) Constraints in data movement and I/O bottle-neck – Inter-node data movement in extreme-scale computing platforms are associated with high energy and latency costs, and subject to the constraints of I/O bandwidth; and 4) Generalization of algorithm realization and acceleration on computing platforms – The large varieties of machine learning algorithms and structures of extreme-scale computing platforms make the derivation of a generalized algorithm realization and acceleration method very challenging, which, however, is the requirement by domain scientists and interested users. We call the above challenges Smale’s Problems in Machine Learning and Understanding for High-Performance Computing Scientific Discovery. The objective of our three-year research project is to develop a holistic innovation set at structure, assembly, and acceleration layers of machine learning algorithms to address the above challenges in algorithm deployment and execution. Three tasks are particularly performed, including: At the algorithm structure level, we investigate the techniques that can structurally sparsify on the topology of deep networks for computing workload reduction. We also study clustering and pruning techniques that can optimize the workload distributions over the extreme-scale computing platforms; At the algorithm assembly level, we derive a unified learning framework for unsupervised transfer learning and dynamic growing capabilities. Novel training methods are also exploited to enhance the training efficiency of the proposed framework; At the algorithm acceleration level, we will develop a series of techniques that can accelerate the computation of sparse matrix operations, which are one of the core executions in deep learning and optimize memory access of the concerned platforms. Our proposed techniques attack the fundamental problems in machine learning algorithms running on extreme-scale computing platforms by vertically integrating the solutions at three closely entangled layers, paving the long-term scaling path of machine learning applications under DOE context. Three tasks corresponding to the above respective research orientations are performed during the three-year project period with our collaborators at ORNL. The outcome of the proposed project is anticipated to form a holistic solution set of novel algorithms and network topologies, efficient training techniques, and fast acceleration methods to promote the computing scalability of the machine learning applications of particular interest to DOE.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2022

Mechanisms of Retention and Transport of Fission Products in Virgin and Irradiated Nuclear Graphite

To fulfill the design and licensing requirements for advanced reactors, the U.S. Department of Energy (DOE) is specifically interested in targeted research to quantify the mechanisms of fission product transport and retention in graphitic grades that will likely be used in next-generation very/high temperature reactors, fluoride salt-cooled high temperature reactors and molten salt reactors. We have examined an integrated experimental-computational approach to determine the diffusivities of selected fission products – ruthenium (Ru) and silver (Ag) in five nuclear graphite grades – POCO AXF-5Q, POCO ZXF-5Q, PCEA, IG110, and NBG-18. Experimental investigation for diffusion of other fission products (iodine, cesium, and krypton) in graphite could not be carried out due to extreme evaporation due to high vapor pressure, despite several attempts incorporating various experimental schemes. Experimental investigation with irradiated graphite could not be carried out because necessary approval to transport irradiated graphite could not be obtained due to procedural reasons at ORNL and national policy change in UK. An effort was made to “produce” by ion sputtering, but it was discontinued because the outcome did not adequately represent irradiated graphite. Thin film and “cup-and-cap” methods were employed to deposit fission products, diffusion annealed were carried out in an argon atmosphere, and concentration profiles were determined by dynamic secondary ion mass spectroscopy depth profiling technique. Regardless of graphite type, anomalous diffusion behavior of Ru (i.e., lower than expected based on Arrhenius temperature dependence) at an intermediate temperature, around 600 to 700 °C, was observed. Diffusion behavior of silver on the other hand agreed well to the Arrhenius temperature dependence although the excessive evaporation of silver hampered the accurate determination of diffusivities at temperature higher than 900 °C. In general, silver was observed to diffuse faster than Ru in the temperature range compared from 500 to 900 °C, had consistently had higher pre-exponential factor corresponding to higher jump frequency. To understand the abnormal diffusional behavior of Ru in graphite in intermediate temperature range, a detailed microstructural analysis was carried out. Clustering of Ru into particles on the surface of graphite was observed around 700 °C corresponding to de-wetting and spheroidization. This change would influence the boundary condition of diffusion, although features of clustering was much smaller (<1 mm) than the SIMS raster size (120 x 120 mm). Raman spectroscopy also demonstrated that Raman peak intensity for Ru decreased significantly for samples annealed higher than 700 °C and presence of Ru in graphite altered the crystallinity of graphite. To further elucidate the abnormal diffusion behavior observed in intermediate temperature investigated, the vibrational properties of graphene, bilayer graphene and Kr atoms in bilayer graphene were investigated with molecular dynamics. Krypton, which is a fission product, was introduced between a bilayer graphene system to evaluate (i) whether the phonon dispersion curves change with high temperature in bilayer graphene (ii) whether the addition of Kr atoms between the bilayer introduces any significant change in the vibrational properties, and (iii) whether any change in the vibrational properties can be correlated to the diffusive behavior of Kr atoms. The results show that the Kr atoms indeed exhibit an anomalous diffusive behavior at 550°C. Phonon analysis shows that a few phonon frequencies are enhanced as much as 20 to 30 % with the addition of just 0.2 at.% Kr. So, this may explain the unexpected self-diffusivity of fission products.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2022

WIRE-21 Sensor Irradiation Experiment Ready for HFIR Insertion

The ability to deploy new nuclear fuels for current or future reactor concepts requires a wealth of data regarding fuel performance during normal operation, anticipated operational occurrences, and design-basis accidents. Most of these data have historically been collected during experiments in materials test reactors, ideally with online instrumentation to collect as much data as possible. However, advanced instrumentation could also allow for in situ monitoring of fuel operating conditions during commercial reactor operation to maximize fuel utilization, reduce unnecessary conservativism in design margins, and improve operator understanding of limiting peaking factors. The latter approach would complicate fuel handling, particularly during refueling, unless the instrumentation could be placed inside the fuel rods and transmitted wirelessly to a receiver located outside the fuel’s primary pressure boundary. To this end, Westinghouse Electric Company (WEC) developed wireless sensors based on inductive coupling that can transmit information regarding fuel centerline temperatures and rod internal pressures wirelessly from within a fuel rod to a nearby instrument thimble. After testing these sensors in lower-power university research reactors, the next step is to perform high neutron fluence testing to characterize the performance of these wireless sensors under conditions that are more representative of the intended application—in this case, light-water reactors (LWRs). The removable Be (RB) positions of the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL) provide the neutron flux, experiment volume, and access to instrument leads required to achieve these sensor testing goals. This report summarizes the design, analysis, and assembly of the Wireless Instrumented RB Experiment 2021 (WIRE-21). This is the most highly instrumented irradiation experiment ever performed in HFIR. The experiment will use seven different sensing techniques to measure temperature, pressure, neutron flux, and neutron fluence during reactor operation. In addition to WEC’s wireless temperature and pressure sensors, WIRE-21 includes an array of thermocouples, self-powered neutron detectors, spatially distributed fiber optic temperature sensors, passive SiC temperature monitors, and flux wires. The design of WIRE-21 and the cabling that was installed in HFIR also provide the infrastructure to enable accelerated, economical testing of advanced sensor technologies while leveraging the extremely high neutron flux that is available in HFIR. The containment for WIRE-21 is similar to previous RB irradiation vehicles but includes a few modifications, most notably the use of integrated compression seals to pass a larger number of sensor leads through the experiment’s pressure boundary. In addition to the sensor leads, inert gas lines are passed into the experiment to enable active temperature control and the ability to pneumatically actuate a bellows-driven pressure sensor. WIRE-21 is targeting component temperatures (300–350°C) and neutron fluence levels (~10 22 n/cm 2 ) that would be expected in the plenum region of LWR fuels, except for the active sensing region of the wireless temperature sensor, which is targeting LWR fuel centerline temperatures (~800–1,100°C). WIRE-21 was successfully assembled, passed all nondestructive examination, and was delivered to HFIR for insertion during upcoming cycle 498 (April 2022).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2022

Furthering Advancements to Shorten the Time (FAST) to Commissioning for Pumped Storage Hydropower (PSH) Prize (CRADA Final Report)

NREL initiated a prize with support from Argonne National Laboratory (ANL), Oak Ridge National Laboratory (ORNL), and Pacific Northwest National Laboratory (PNNL), and sponsored by the U.S. Department of Energy Water Power Technologies Office (DOE WPTO) to encourage ideas to reduce the time to commissioning for PSH projects. As a result, Southwest Research Institute (SWRI) was chosen as one of nine finalists to develop their concept in advance of the FAST Prize Pitch Contest held on October 27, 2021. The National Labs provided technical and business advisement to SWRI in preparation for this Pitch Contest.

13 HYDRO ENERGY↗

DOE OSTI2021

Gamma spectrometry uranium isotopic analysis rodeo: Summary of GADRAS results

This report summarizes GADRAS methods and gamma spectrometry rodeo uranium isotopic analysis results for high energy resolution H3D M400 cadmium zinc telluride (CZT) and ORTEC Micro Detective high-purity germanium (HPGe) spectra of uranium isotopic standards collected at Oak Ridge National Laboratory (ORNL) and Lawrence Livermore National Laboratory (LLNL) over a two-year measurement campaign. During the campaign, measurements were performed with the detectors unshielded, side shielded, and collimated. In addition, measurements of the uranium isotopic standards were performed unshielded and shielded.

07 ISOTOPE AND RADIATION SOURCES↗

DOE OSTI2021

Security by Design Economics Analysis for Advanced Reactors and Small Modular Reactors Project Interim Report for FY2021

Advanced Reactor and Small Modular Reactor (AR/SMR) designs have the potential to provide clean, reliable baseload energy. Ensuring the capability to deploy these reactors in an economically viable fashion is of interest to industry. A large portion of the expected operating costs of AR/SMRs involves the security of the plant. Security by Design (SeBD) is the practice of including features in the design and construction of the site, with the intent to decrease the operating costs related to security. Quantifying the increase or decrease in the overall lifetime cost to the plant as a result of SeBD is of paramount importance in understanding the disadvantages and benefits of such activities. The National Nuclear Security Administration’s (NNSA) Office of International Nuclear Security (INS) is funding the development of a methodology whereby the capital expenses and operating expenses, as well as the physical security effectiveness, of SeBD can be quantified for AR/SMRs. This report is an interim report on the progress of the work performed by Sandia National Laboratories (SNL), Idaho National Laboratory, and Oak Ridge National Laboratory (ORNL). It is the second annual report on this work.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2021

Biological Carbon Sequestration for Climate and Soil Health

58 GEOSCIENCES↗

DOE OSTI2021

Biological Carbon Sequestration for Climate and Soil Health

The United States recently launched the Net Zero World Initiative on decarbonization. As temperatures and sea levels rise, strong action is needed to mitigate high atmospheric CO 2 levels. In response to this need, a joint workshop between the US Department of Energy’s Oak Ridge National Laboratory (ORNL) and Lawrence Berkeley National Laboratory (LBNL) was convened to assess the challenges and opportunities within biological carbon (C) capture. The virtual workshop on Biological Carbon Sequestration for Climate and Soil Health focused on three aspects of biological C capture research: natural systems, engineered systems, and modeling. For this workshop, the scope of natural systems included unmanaged (e.g., grasslands, wetlands, natural forests) and managed (e.g., agricultural lands, commercial forests, forest biofuels) ecosystems. The engineered systems group covered topics in genetically modified plants and microbes, synthetic microbiomes, and altered plant–microbe interactions for enhancing C capture, storage, and utilization. The modeling group focused on computational tools and data collection to predict and assess the effectiveness of new biocarbon sequestration advances. Participant expertise included plant and microbial systems biology, synthetic biology, soil biogeochemistry, and techno-economic analysis. Together, participants outlined key scientific advances in support of biological C capture and storage. Among the major findings of the meeting were the need to better measure C flux within natural, agricultural, and fabricated ecosystems for experimentation; better understand the role of soil composition, plant roots, and the rhizosphere (i.e., the soil surrounding the plant root) in the underground storage of organic C; and design plant–microbe systems for maximal C storage.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Artificial Intelligence/Machine Learning Technologies for Advanced Reactors (Workshop Summary Report)

A workshop on artificial intelligence and machine learning (AI/ML) for advanced reactors (AR) was held October 5-6, 2021. The workshop was to be attended in-person at ANL but COVID restrictions forced the workshop to go virtual. The objectives of the workshop were to identify the most promising AI/ML opportunities for improving advanced reactor design, optimizing plant performance, and enhancing economic competitiveness and to develop an understanding of the scientific, engineering and licensing challenges facing their application. The workshop planning committee included GAIN, EPRI and NEI and members of three national laboratories (ANL, INL, and ORNL). The workshop was attended by more than 200 individuals representing academic and scientific institutions and the nuclear power industry. The definition put forth for an AI/ML system was one that perceives its environment and takes actions that maximize its chance of achieving its goals. In this report AI/ML refers to next generation algorithms that include deep learning, statistical analysis and data analytics and associated scientific computing and their potential application to the design, licensing, operation and maintenance of ARs. These methods typically incorporate models built from process data and may also include data generated by simulations that represent the behavior of a system. The workshop was organized in response to the growing interest in application of AI/ML for improving the economic competitiveness of nuclear energy. Increasingly more resources are being allocated to investigating the benefits of AI/ML methods. The DOE created the Artificial Intelligence & Technology Office to promote their development. And within the Office of Nuclear Energy, resources have been allocated to explore and understand the potential benefits of AI/ML. Additionally, the national laboratories are strategically positioned with DOE computing facilities such as Summit, Perlmutter, Aurora and Frontier that support large-scale simulations, hybrid HPC models with AI surrogates, and the exploration of new types of generative models emerging from multi-model data streams and sources. The workshop was organized with members of the AR community to understand the effort and to identify the level of interest and progress in this emerging technology. The workshop discussions focused on identifying opportunities for AI/ML across diverse areas of the nuclear industry and identifying current scientific and engineering challenges for advanced reactors that might be addressed through transformational uses of AI/ML. Discussion panels focused on four high-interest technical domains for advanced reactors: design, maintenance and operations, energy storage, and materials. The results of those discussions are summarized in this report. This includes opportunities that were identified for exploiting AI techniques and methods to improve the efficacy and efficiency of reactor analysis and to improve the operation and optimization of advanced reactors. Advanced reactor developers expressed an interest in learning more about AI/ML methods and their application. This included understanding whether ML methods can provide an advantage over existing nonlinear data regression methods for collapsing high-fidelity simulation results into faster running models. A consensus emerged that AR advances planned for the next decade will benefit from the use of AI/ML tools. The need exists to understand and model complex systems across length scales and modalities. AI/ML is a tool for discovery that can yield a set of engineering principles for use by nuclear engineers, licensing bodies, and operators to solve problems in plant design, safety analyses, autonomous operation, and predictive maintenance. While AI/ML represents a new set of tools, an awareness by the nuclear community of the full potential is still in the early stages so there is a need to increase awareness. It appears that the wide-spread adoption of AI/ML tools for ARs would be facilitated by future educational workshops that describe foundational methods and capabilities and describe successful applications.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2021

Mercury Remediation Technology Development for Lower East Fork Poplar Creek—FY 2021 Update

Mercury remediation is a high priority for the US Department of Energy (DOE) Oak Ridge Office of Environmental Management. Mercury contamination in the environment can be found at all three DOE facilities in Oak Ridge, Tennessee, but the greatest environmental risk concern relative to Hg on the Oak Ridge Reservation is likely associated with historical Hg losses at and near the Y-12 National Security Complex (Y-12). Mercury in water and fish from East Fork Poplar Creek (EFPC) downstream of Y-12 exceeds regulatory thresholds. Because of the complexities of Hg transport and fate in the aquatic environment, conventional remedial options for EFPC are highly uncertain. DOE is using a phased adaptive management approach to Hg remediation at Y-12, with a focus in the next few years on construction of the Mercury Treatment Facility (MTF) to treat the most contaminated Y-12 outfall entering EFPC (DOE 2017a; DOE 2017b). Once operational, the MTF will provide additional protection against inadvertent releases of Hg into the stream from decontamination and decommissioning of Y-12 Hg-use buildings. Although the MTF is anticipated to substantially decrease Hg water concentrations and flux in upper EFPC (UEFPC), research and technology development are needed to develop appropriate and longer-term remedial solutions for the downstream environment. Since late 2014, the Oak Ridge Office of Environmental Management and URS | CH2M Oak Ridge LLC/Restoration Services Inc. have supported DOE’s Oak Ridge National Laboratory (ORNL) Environmental Sciences Division staff in conducting field and laboratory studies to develop Hg remedial technology solutions for lower EFPC (LEFPC). Whereas previous annual reporting updates for Hg remediation technology development for LEFPC have focused on presenting detailed results from the previous fiscal year, this FY 2021 update takes a comprehensive, higher-level approach to the research and technology development activities conducted since 2014. The report is organized to be consistent with the three tasks defined in the LEFPC strategic plan

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2022

Sister Rod Destructive Examinations (FY2021) Appendix J: Leaching of High Burnup Used Nuclear Fuel in De-ionized Water

As a part of the DOE NE High Burnup Spent Fuel Data Project, Oak Ridge National Laboratory (ORNL) is performing destructive examinations (DEs) of high burnup (HBU) (>45 GWd/MTU) spent nuclear fuel (SNF) rods from the North Anna Nuclear Power Station operated by Dominion Energy. The SNF rods, called sister rods or sibling rods, are all HBU and include four different kinds of fuel rod cladding: standard Zircaloy-4 (Zirc-4), low-tin Zirc-4, ZIRLO, and M5. The leaching experiment was a part of a larger study by Yadukrishnan Sasikumar in defending his doctoral thesis at The Open University, School of Engineering and Innovation [13]. It utilized post-CIRFT Sister Rod test specimens that were slated for disposal. The leaching experiment aims to understand the trends in the radiolytic dissolution of High Burnup Spent Nuclear Fuel (SNF) when exposed to water (e.g., in-reactor or in-pool cladding failures). Specimens from a baseline M5-clad rod and a heat-treated M5 rod were cut from the fractured CIRFT specimens and placed in 100 mL de-ionized water for a period of 128 days. Both radial and axial sections were cut to provide different surface areas of fuel in contact with the leachate. During the four-month exposure period, aliquot samples of the leachate were analyzed gamma spectroscopy and inductively coupled plasma mass spectrometry (ICP-MS). The analysis quantified the amount of fuel leached into the solutions and provided individual isotopic release fractions (of 30+ isotopes) which were compared as a function of time and surface area of fuel exposed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗