Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OMIT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Long range B-site cation ordering and Briet–Wigner–Fano line shape of A{sub 1g}-like Raman mode in Nd{sub 1−x}Sm{sub x}(Mg{sub 0.5}Ti{sub 0.5})O{sub 3} microwave dielectric ceramics

Graphical abstract: Display Omitted Highlights: ► Q × f of Nd{sub 1–x}Sm{sub x}(Mg{sub 0.5}Ti{sub 0.5})O{sub 3} are correlated with B-site cation ordering (LRO). ► Correlation between LRO and Γ of A{sub 1g}-like mode in Raman spectrum is observed. ► Reason for asymmetry in A{sub 1g}-like Raman mode in these materials is revealed. ► Briet–Wigner–Fano resonance is confirmed with temperature variation in Raman spectra. -- Abstract: Nd{sub 1−x}Sm{sub x}(Mg{sub 0.5}Ti{sub 0.5})O{sub 3} (x = 0.0–1.0) samples were prepared by solid-state reaction method. Rietveld refinement of X-ray diffraction data was done using P2{sub 1}/n space group with monoclinic symmetry, which supports 1:1 B-site cation ordering. Long range ordering (LRO) parameter decreased up to x = 0.5 and then found to increase with further increase in Sm concentration. The A{sub 1g}-like mode in Raman spectra was observed to possess Briet–Wigner–Fano line shape. The variation in obtained line width of the A{sub 1g}-like mode supported LRO. Microwave dielectric characteristics such as dielectric constant (ε{sub r}), quality factor (Q) and temperature coefficient of resonant frequency (τ{sub f}) were measured in the range of 7–9 GHz. ε{sub r} decreased from 26.5 to 24.9 and τ{sub f} become less negative from −58 ppm/°C to −36 ppm/°C with increase in Sm concentration. Q × f decreased from 47,500 GHz (for x = 0) to 39,800 GHz (for x = 0.5) and then increased to 44,600 GHz (for x = 1).

36 MATERIALS SCIENCE↗

Removal of dissolved humic acid from water by photocatalytic oxidation using a silver orthophosphate semiconductor

Graphical abstract: Display Omitted Highlights: ► The photocatalytic property of a silver orthophosphate (Ag{sub 3}PO{sub 4}) was investigated for humic acid degradation. ► The Ag{sub 3}PO{sub 4} shows high photocatalytic activity under visible light. ► The photocatalytic activity was greatly improved by employing the precipitation method. -- Abstract: In order to remove dissolved organic matter such as humic acid from water, a silver orthophosphate (Ag{sub 3}PO{sub 4}) was newly employed as a heterogeneous photocatalyst. Here, Ag{sub 3}PO{sub 4} was prepared by simple ion-exchange and precipitation methods, and the physico-chemical properties were characterized by X-ray diffraction, ultraviolet–visible diffuse reflectance spectroscopy, scanning electron microscopy, particle distribution measurements and Brunauer–Emmett–Teller (BET) analysis. The degradation of humic acid was faster over Ag{sub 3}PO{sub 4} catalyst than over conventional TiO{sub 2} (P-25). The total photocatalytic properties were improved by employing not an ion-exchange method but a precipitation method; humic acid degradation was performed with a removal ratio of dissolved organic carbon of 75% under visible light (λ = 451 nm) for 2-h irradiation.

36 MATERIALS SCIENCE↗

Synchronistic preparation of fibre-like SiC and cubic-ZrO{sub 2}/SiC composite from zircon via carbothermal reduction process

Graphical abstract: Display Omitted Highlights: ► Zircon carbothermal reduction was carried out in a tailor-made device at high-temperature air atmosphere. ► Fibre-like SiC and cubic-ZrO{sub 2}/SiC composite were obtained synchronically. ► Zirconium and silicon in zircon ore was initial separated. ► [SiO{sub 4}] was mutated to fibre-like SiC, while [ZrO{sub 8}] was transformed to cubic ZrO{sub 2}. ► The SiC were surprisingly enriched in the reducing atmosphere charred coal particles layers by gas–solid reaction. -- Abstract: Fibre-like SiC and cubic-ZrO{sub 2}/SiC composite were prepared respectively from zircon with yttrium oxide addition via carbothermal reduction process at 1600 °C for 4 h in an air atmosphere furnace, where the green samples were immerged in charred coal particles inside a high-temperature enclosed corundum crucible. The reaction products were characterized by XRD, XRF, XPS and SEM. The results indicate that ZrO{sub 2} in the products was mainly existed in the form of cubic phase. The reacted samples mainly contain cubic ZrO{sub 2}, β-SiC and trace amounts of zircon, with the SiC accounting for 14.8 wt%. Furthermore, a large quantity of fibre-like SiC was surprisingly found to concentrate in the charred coal particles layers around the samples. This study obtains fibre-like SiC and cubic-ZrO{sub 2}/SiC composite synchronically from zircon via carbothermal reduction process, which also bring a value-added high-performance application for natural zircon.

36 MATERIALS SCIENCE↗

Anisotropic silver nanoparticles as filler for the formation of hybrid nanocomposites

Graphical abstract: Display Omitted Highlights: ► Prismatic and plate-like Ag nanoparticles were used as a precursors for preparation Ag/poly(vinyl alcohol) nanocomposite films. ► Results showed that the degree of crystallinity of the polymer decreases with Ag nanoparticles content. ► The presence of Ag nanoparticles in PVA induces higher thermo-oxidative stability with respect to PVA. -- Abstract: Prismatic and plate-like silver nanoparticles (Ag NPs) were synthesized according to the seed-mediated method. These particles were used as precursors for preparation of homogenous, transparent and colored Ag/poly(vinyl alcohol) (PVA) nanocomposite films with different concentrations of Ag by solution-casting technique. Optical and structural characterization of these nanocomposites includes UV–visible spectroscopy, X-ray diffraction (XRD), FTIR spectroscopy and SEM measurements. Further, the effect of embedded nanoparticles on the thermal properties of the PVA matrix was studied. The value of the glass transition temperature of polymer is found to increase after embedding Ag NPs. Comparison of thermal properties of pure PVA and nanocomposite films showed that the thermo-oxidative stability of polymer slightly increased in the presence of Ag NPs. Furthermore, the effect of the Ag NPs on the crystallinity of polymer was also observed.

36 MATERIALS SCIENCE↗

Influences of urea–glycerol mixtures as mixed mesopore-controlling agents on tailoring physicochemical properties and photocatalytic H{sub 2} production activity of sol–gel-derived mesoporous-assembled TiO{sub 2} nanocrystals

Graphical abstract: Display Omitted Highlights: ► Mesoporous-assembled TiO{sub 2} nanocrystals were synthesized by modified sol–gel process. ► Urea–glycerol mixtures were applied as mixed mesopore-controlling agents. ► Urea and glycerol contents affected physicochemical properties of synthesized TiO{sub 2}. ► Photocatalytic H{sub 2} production activity also depended on urea and glycerol contents. ► 75 mol% urea and 25 mol% glycerol yielded the most photocatalytically active TiO{sub 2}. -- Abstract: In this work, the mesoporous-assembled TiO{sub 2} nanocrystal photocatalysts were successfully synthesized by a sol–gel process with the aid of urea–glycerol mixtures used as mixed mesopore-controlling agents. The photocatalytic activity of the synthesized mesoporous-assembled TiO{sub 2} nanocrystal photocatalysts was investigated for hydrogen production from the water splitting reaction using methanol as a hole scavenger under UV light irradiation. The synthesized TiO{sub 2} nanocrystal photocatalysts were systematically characterized by TG–DTA, N{sub 2} adsorption–desorption, SEM, high resolution TEM, and XRD analyses. The characterization results showed that the well-controlled contents of urea and glycerol in a urea–glycerol mixture at 75 mol% urea and 25 mol% glycerol resulted in not only the most highly porous network (i.e. the highest specific surface area and total pore volume, and the smallest mean mesopore diameter), but also the smallest crystallite size of the synthesized TiO{sub 2} nanocrystal photocatalyst. The photocatalytic reaction results, hence, revealed a much superior photocatalytic hydrogen production activity of the mesoporous-assembled TiO{sub 2} nanocrystal synthesized with 75 mol% urea and 25 mol% glycerol to the other synthesized TiO{sub 2} nanocrystals, also being much higher than those of the commercially available P-25 TiO{sub 2} and ST-01 TiO{sub 2} powders.

36 MATERIALS SCIENCE↗

Electrochemically synthesized visible light absorbing vertically aligned N-doped TiO{sub 2} nanotube array films

Graphical abstract: Display Omitted Highlights: ► Single step electrochemical synthesis of N-doped TiO{sub 2} nanotube array films. ► Effective substitutional N-doping achieved. ► Different N-concentrations were achieved by varying the N-precursor concentration in the electrolyte. ► Visible light absorption observed at high N-doping. -- Abstract: Visible light absorbing vertically aligned N-doped anatase nanotube array thin films were synthesized by anodizing Ti foils in ethylene glycol + NH{sub 4}F + water mixture containing urea as nitrogen source. Different nitrogen concentrations were achieved by varying the urea content in the electrolyte. The structure, morphology, composition and optical band gap of the nanotube arrays were determined by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy (XPS) and diffuse reflectance spectroscopy, respectively. The substitution of O{sup 2−} ions by N{sup 3−} ions in the anion sublattice as well as the formulae of the doped samples was confirmed from the results of XPS. The optical band gap of the nanotube arrays was found to decrease with N-concentration. The sample with the highest concentration corresponding to the formula TiO{sub 1.83}N{sub 0.14} showed two regions in the Tauc's plot indicating the presence of interband states.

36 MATERIALS SCIENCE↗

Liquid phase preparation and fluorescence of flake-liked NdF{sub 3} nanomaterials

Graphical abstract: Room-temperature emission spectra of NdF{sub 3} nanoflakes exhibit a strong luminescence emission peak at 402 nm when irradiated by an excitation wavelength of 250 nm. Display Omitted Highlights: ► NdF{sub 3} nanoflakes have been successfully prepared by a facile and repeatable liquid phase preparation. ► The action of oxalic acid in the reaction process was studied, showing important in the morphology of neodymium fluorides. ► The study on the fluorescent properties of flake-like NdF{sub 3} nanomaterials shows a strong emission peak at 402 nm by the excitation wavelength of 250 nm. -- Abstract: Neodymium fluoride nanoflakes were successfully prepared by a facile liquid phase preparation with Nd(NO{sub 3}){sub 3} and NaF as raw materials. In the process, oxalic acid acting as template agent was found to play important roles in the morphology of neodymium fluorides. The as-synthesized NdF{sub 3} nanoflakes were characterized by various techniques of X-ray diffraction (XRD), scanning electron microscope (SEM) and energy dispersive X-ray spectrometer instrument (EDS). The fluorescent properties of neodymium fluoride nanoflakes were investigated, showing a strong luminescence emission peak at 402 nm by the excitation wavelength of 250 nm.

36 MATERIALS SCIENCE↗

Thermal and structural stability of single- and multi-walled carbon nanotubes up to 1800 °C in Argon studied by Raman spectroscopy and transmission electron microscopy

Graphical abstract: Display Omitted Highlights: ► Structural stability of carbon nanotubes up to 1800 °C in Argon (∼0.05 MPa). ► Thorough TEM and Raman spectroscopy of as received and heat treated CNTs. ► Analyses on the extent of structural changes during high temperature exposure. ► Discussion on safe upper temperature limit for practical use of SWCNTs and MWCNTs. -- Abstract: Effect of high temperature exposure (up to 1800 °C) on morphology of single- and multi-walled carbon nanotubes in Argon atmosphere has been studied using Raman spectroscopy and transmission electron microscopy. Although, as received nanotubes contained irregular graphene layers and other structural defects, microscopic observations revealed that heat treatment in Argon reduced the defect density and helped proper alignment of graphene layers. Raman spectra of as received and heat treated nanotubes strongly reinforced the microscopic observations. While, D-band to G-band intensity ratio in Raman spectra of 1800 °C heat treated multiwalled nanotubes reduced by ∼43% over as received one, this ratio for heat treated singlewalled nanotubes was ∼27% lower than that of the untreated specimen. Present study suggested that although, multiwalled nanotubes were structurally stable up to 1800 °C in an inert atmosphere having only a few nano-scale defects, singlewalled nanotubes suffered considerable damage at 1800 °C due to much thinner dimension than the former.

36 MATERIALS SCIENCE↗

A simple way to synthesize well-dispersed Gd{sub 2}O{sub 3} nanoparticles onto reduced graphene oxide sheets

Graphical abstract: Display Omitted Highlights: ► A simple approach to obtain Gd{sub 2}O{sub 3} nanoparticles onto RGO sheets. ► Gd{sub 2}O{sub 3} nanoparticles could be bonded with RGO by the residual C-OH or COOH groups. ► The as-prepared Gd{sub 2}O{sub 3} nanoparticles are well-dispersed and in the size of 10–50 nm. -- Abstract: High quality and dispersible rare-earth oxides (RE{sub 2}O{sub 3}) nanocrystals have drawn great attention because of their potential applications in the optical, electrical and biological fields. Here, we demonstrated a simple approach for the production of gadolinium oxide (Gd{sub 2}O{sub 3}) nanoparticles onto the surface of reduced graphene oxide (RGO) sheets by the chemical and the subsequent thermal reduction reactions. The residual oxygen functionalities derived from the reduction of graphene oxide (GO) played an important role to complex Gd{sub 2}O{sub 3} nanoparticles with RGO sheets. And the as-synthesized Gd{sub 2}O{sub 3} nanoparticles are uniform and well-dispersed with their particle size in the range of 10–50 nm. The approach would open up a new window for simple and effective synthesis of high quality RE{sub 2}O{sub 3} in nano scale.

36 MATERIALS SCIENCE↗

Tunable synthesis of TiO{sub 2}/SrO core/shell nanowire arrays with enhanced photocatalytic activity

Graphical abstract: TiO{sub 2} nanowires with tunable SrO shell layer are easily fabricated. The core/shell structure can enhance the photocatalytic activity of TiO{sub 2} nanowires and restrict the recombination of the electrons/holes. Display Omitted Highlights: ► A facile method to fabricate TiO{sub 2}/SrO core-shell nanowire array is reported. ► The thickness of SrO shell layer can be tunable by adjusting the dipping time. ► TiO{sub 2}/SrO core/shell nanowires shows enhanced photocatalytic activity. -- Abstract: We report a simple method to fabricate well-aligned TiO{sub 2}/SrO core/shell nanowire arrays. The core/shell structure is confirmed to have crystalline TiO{sub 2} nanowires core and amorphous SrO shell layer. The shell is composed of SrO with tunable thickness. Photocatalytic activity measurement shows that TiO{sub 2}/SrO core/shell nanowire arrays outperform uncovered TiO{sub 2} nanowires. Such core/shell nanowire arrays have potential applications for photovoltaic devices and as high performance photocatalyst.

36 MATERIALS SCIENCE↗

Influence of halide flux on the crystallinity, microstructure and thermoluminescence properties of CdSiO{sub 3}:Co{sup 2+} nanophosphor

Graphical abstract: TL glow curves of CdSiO{sub 3}:Co{sup 2+} different alkali flux (inset without adding flux). Display Omitted Highlights: ► CdSiO{sub 3}:Co{sup 2+} (1–7 mol%) nanocrystalline phosphors synthesized by combustion route. ► Flux effect on thermoluminescence behavior of CdSiO{sub 3}:Co{sup 2+} reported for first time. ► Addition of 2 wt% of flux would drastically enhance the TL properties. ► Well resolved single glow peak at ∼170 °C was recorded for all the samples. ► Among all the alkali flux, NaCl shows highest TL peak intensity. -- Abstract: CdSiO{sub 3}:Co{sup 2+} (1–7 mol %) nanophosphors have been prepared via solution combustion method with post calcination at 800 °C for 2 h for the first time. The formation of expected monoclinic phase was investigated by Powder X-ray diffraction (PXRD) measurements. The effect of different fluxes like NaF, NaCl, NH{sub 4}F and NH{sub 4}Cl on the crystallinity, phase and morphology of CdSiO{sub 3} was investigated in detail. The crystallinity of the samples can be greatly enhanced by using fluxes rather than increasing the calcination temperature. Scanning electronic micrograph (SEM) image shows that the powder morphologies are highly influenced by flux addition. The addition of 2 wt% of fluxes would drastically enhance the crystallinity when NaCl, NH{sub 4}F and NH{sub 4}Cl fluxes are used. A well resolved single thermoluminescent glow peak at ∼170 °C was recorded for all the samples. Among all the halide fluxes, NaCl flux was found to be the potential one in enhancing the TL peak intensity along with crystallinity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Antifungal activity of gold nanoparticles prepared by solvothermal method

Graphical abstract: Gold nanoparticles (7 and 15 nm) of very high surface area (329 and 269 m{sup 2}/g) have been successfully synthesized through solvothermal method by using tin chloride and sodium borohydride as reducing agents. As-prepared gold nanoparticles shows very excellent antifungal activity against Candida isolates and activity increases with decrease in the particle size. Display Omitted Highlights: ► Effect of reducing agents on the morphology of gold nanoparticles. ► Highly uniform and monodisperse gold nanoparticles (7 nm). ► Highest surface area of gold nanoparticles (329 m{sup 2/}g). ► Excellent antifungal activity of gold nanoparticles against Candida strains. -- Abstract: Gold nanoparticles have been successfully synthesized by solvothermal method using SnCl{sub 2} and NaBH{sub 4} as reducing agents. X-ray diffraction studies show highly crystalline and monophasic nature of the gold nanoparticles with face centred cubic structure. The transmission electron microscopic studies show the formation of nearly spherical gold nanoparticles of average size of 15 nm using SnCl{sub 2}, however, NaBH{sub 4} produced highly uniform, monodispersed and spherical gold nanoparticles of average grain size of 7 nm. A high surface area of 329 m{sup 2}/g for 7 nm and 269 m{sup 2}/g for 15 nm gold nanoparticles was observed. UV–vis studies assert the excitations over the visible region due to transverse and longitudinal surface plasmon modes. The gold nanoparticles exhibit excellent size dependant antifungal activity and greater biocidal action against Candida isolates for 7 nm sized gold nanoparticles restricting the transmembrane H{sup +} efflux of the Candida species than 15 nm sized gold nanoparticles.

36 MATERIALS SCIENCE↗

A simple one-step synthesis of ZnS nanoparticles via salt-alkali-composited-mediated method and investigation on their comparative photocatalytic activity

Graphical abstract: The TEM image shows that the as-synthesized ZnS particle size was estimated to be about 40 nm and this newly synthesized ZnS nanoparticles can be as a promising photocatalytic degradation material for the organic pollutant removal. Display Omitted Highlights: ► ZnS nanoparticles with cubic phase have been successfully synthesized via salt-alkali-composited-mediated method (SACM) for the first time and this method has not been found so far. ► Its band gap (E{sub g}) is a little bigger than commercial ZnS particle mainly due to quantum size effect. ► The as-synthesized ZnS nanoparticles show much more efficient photocatalytic degradation on methyl orange than commercial ZnS powder. -- Abstract: ZnS nanoparticles have been successfully synthesized via salt-alkali-composited-mediated method (SACM) for the first time, using a mixture of LiNO{sub 3} and LiOH (LiNO{sub 3}/LiOH = 60.7:39.3) as a reaction solvent, sodium sulfide and zinc nitrate as reactants at temperature of 210 °C for 24 h in the absence of organic dispersant or capping agents. X-ray diffraction, environment scanning electron microscopy (ESEM) and Transmission electron microscopy (TEM) indicated that the as-synthesized products were well crystallized and belonged to nano-scale. Their UV–vis absorption spectrum demonstrated a band gap of 3.6406 eV corresponding to the absorption edge of 340 nm. The experimental result of photocatalytic degradation on methyl orange by the nano-ZnS showed much better photocatalysis than that by the commercial ZnS powder under the irradiation of ultraviolet light and visible light, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal synthesis of Li{sub 4}Ti{sub 5}O{sub 12}/C nanostructured composites: Morphology and electrochemical performance

Graphical abstract: Display Omitted Highlights: ► Nanostructured composite Li{sub 4}Ti{sub 5}O{sub 12}/C was obtained hydrothermally. ► The amount of carbon black influenced significantly the morphology of the composite. ► Rate capability of Li{sub 4}Ti{sub 5}O{sub 12} was improved by the synthesis in presence of carbon black. ► Coulombic capacity of 150 mAh g{sup −1} was obtained at a discharging rate of even 10 C. -- Abstract: Li{sub 4}Ti{sub 5}O{sub 12}/C composites with low (3 wt.%) and high (33 wt.%) carbon black content as well as carbon-free Li{sub 4}Ti{sub 5}O{sub 12} were prepared in two steps under identical conditions: hydrothermal reaction at 130 °C and post-calcination at 400 °C. The X-ray diffraction experiments confirmed the spinel structure of Li{sub 4}Ti{sub 5}O{sub 12} in all samples. The carbon content altered significantly the morphology of obtained micro/nanoparticles. The Li{sub 4}Ti{sub 5}O{sub 12}/C composite with the high carbon content showed the highest electrical conductivity (2.0 S cm{sup −1}), and displayed also extraordinary electrochemical performance: the cyclovoltammograms consisted of well defined reversible redox peaks at a scan rate as high as 10 mV s{sup −1}, while, by galvanostatic cycling, the coulombic capacity of 150 mAh g{sup −1} was evidenced at a discharging rate of 10 C.

36 MATERIALS SCIENCE↗

Preparation of cobalt ferrite nanoparticles via a novel solvothermal approach using divalent iron salt as precursors

Graphical abstract: CoFe{sub 2}O{sub 4} nanoparticles are obtained via solvothermal approach using Fe{sup 2+} salt as iron resource. The magnetic properties can be modified by some additives. Display Omitted Highlights: ► CoFe{sub 2}O{sub 4} nanoparticles are synthesized by a facile one-step novel solvothermal method. ► The system is firstly performed in water–glycol mixture solvent with an ordinary air surrounding. ► The ferrous ions are used as iron source without adding oxidant. ► It is firstly found the low-coercivity CoFe{sub 2}O{sub 4} nanoparticles can be obtained with the help of some additives in the synthesis system. -- Abstract: Cobalt ferrite (CoFe{sub 2}O{sub 4}) nanoparticles are synthesized by a facile novel solvothermal method. The reactions are firstly performed in water–glycol system and Fe{sup 2+} salt is used as iron source without oxidant help. Some factors influenced the reactions, including temperature, reaction time, additives, are investigated. The samples are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM), respectively. The magnetic properties of some samples are detected by vibrating sample magnetometry techniques (VSM). It is firstly found that the magnetism of cobalt ferrites nanomaterials can be modified by some additives. The coercivity of CoFe{sub 2}O{sub 4} nanoparticles evidently decreases from 600 to 50 Oe in the presence of PEG-4000 in the system.

36 MATERIALS SCIENCE↗

Influence of the process parameters on the spray pyrolysis technique, on the synthesis of gadolinium doped-ceria thin film

Graphical abstract: Gas-tight CGO made by spray pyrolysis suitable to be used as SOFC electrolyte. Display Omitted Highlights: ► Dense and crystalline CGO films deposited by spray pyrolysis on various substrates. ► Solvent did not have a strong influence on the film microstructure, defect concentration or thickness. ► The substrate did not have a strong influence on the film microstructure, defect concentration or thickness. ► Films with at least 2.5 μm of thickness presented high impermeability. ► The films obtained are suitable to use as a SOFC electrolyte. -- Abstract: This work presents the results of a process of optimization applied to gadolinia-doped ceria (Ce{sub 0.8}Gd{sub 0.2}O{sub 1.9−x}, or CGO) thin films, deposited by spray pyrolysis (SP). Spray pyrolysis is a high thermal deposition method that combines material deposition and heat treatment. This combination is advantageous since the post-deposition heat treatment step is not necessary. However, stresses are solidified in the coating during the deposition, which may lead to the initiation of a crack in the coating. The aim of this work was to achieve thin, dense, and continuous CGO coatings, which may be used as gas separation membranes and as a solid state electrochemical interfaces. Dense, flat, low-defect substrates such as silica slides, silicon mono crystal wafers, and porous substrates were used as substrates in this work. Cerium ammonium nitrate and gadolinium acetylacetonate were dissolved in ethanol and butyl carbitol to form a precursor solution that was sprayed on the heated substrates. Process parameters such as solvent composition, deposition rate and different heating regimes were analyzed. The microstructure was analyzed by secondary electron microscopy (SEM) and was found that thin, dense, and defect-free films could be produced on dense and porous substrates. The results obtained show that it is possible to obtain a CGO dense film deposited by spray pyrolysis. X-ray diffraction (XRD) analysis showed that the films were crystalline after the deposition without requiring post-deposition heat treatment. The crystallite size does not vary significantly as a function of the annealing temperature.

36 MATERIALS SCIENCE↗

Magnetic field-assisted synthesis of wire-like Co{sub 3}O{sub 4} nanostructures: Electrochemical and photocatalytic studies

Graphical abstract: Schematic illustration for the magnetic field-assisted growth of wire-like Co{sub 3}O{sub 4} nanostructure. Display Omitted Highlights: ► Co{sub 3}O{sub 4} nanowires are prepared by magnetic field hydrothermal reduction and annealing. ► These Co{sub 3}O{sub 4} nanowires possess enhanced capacitance. ► The Co{sub 3}O{sub 4} nanowires have a good photocatalytic activity for methyl orange. -- Abstract: Wire-like Co{sub 3}O{sub 4} nanostructures were prepared by the combination of magnetic field-assisted hydrothermal reduction of cobalt ions and the subsequent ambient annealing at 500 °C. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the structure and morphological evolution of the products. The results show that the wire-like nanostructures possess diameters about 250 nm and lengths over 10 μm. The possible formation mechanism of the wire-like Co{sub 3}O{sub 4} nanostructures is also proposed based on the SEM results. Galvanostatic methods were used to characterize the electrochemical properties. The measurements indicate that the wire-like Co{sub 3}O{sub 4} nanostructures show larger discharge and charge capacities than that of spherical Co{sub 3}O{sub 4} nanoparticles prepared in the absence of magnetic field. In addition, the photocatalytic activity of the products was investigated by measuring the photodegradation of methyl orange solution under ultraviolet radiation, which shows that both the wire-like and spherical products have a good photocatalytic activity.

36 MATERIALS SCIENCE↗

Co-evaporation of transition metal salt and SiO powder toward copper(or nickel)/silicon-contained composite nanostructures

Graphical abstract: Copper(or nickel)/silicon-contained composite nanostructures were successfully synthesized by co-evaporating SiO powder and corresponding transition metal salts (nickel formate and copper sulfate). Display Omitted Highlights: ► Novel nanostructures were synthesized by co-evaporating SiO and metal salts. ► A pre-sintering process was used in the synthesis of copper/silicon nanocomposites. ► A Ni{sub 31}Si{sub 12}/Si/SiO{sub 2} nanocomposite was obtained. ► Peapod-like copper/silicon-contained nanocomposites were obtained. ► On the basis of experimental results, the formation mechanism was discussed. -- Abstract: We demonstrate that several novel copper(or nickel)/silicon-contained composite nanostructures were successfully synthesized by co-evaporating SiO powder and corresponding transition metal salts (transition metal organic salt and transition metal inorganic salt), including nickel formate, cobalt acetate, and copper sulfate. The morphologies, compositions, and crystal structures of products were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDS), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM). The results indicate that the morphology and composition of formed copper(or nickel)/silicon-contained composite nanostructures are dramatically influenced by the distance between SiO powder and transition metal salts, or by the pre-sintering temperature of the reactants. The possible formation mechanisms of these composite nanostructures were discussed on the basis of experimental observations.

36 MATERIALS SCIENCE↗