Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OLIVINE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Mechanical aggregation of enstatite chondrites from an inhomogeneous debris cloud

Enstatite chondrites have oxygen isotope ratios closer to those of the earth and moon than other meteorites. Their minerals are chemically reduced; metal contains Si, and some Ca, Ti, Mg and Mn are incorporated in sulphides rather than silicates. Clinoenstatite and olivine are virtually Fe-free. Two types of clinoenstatite in the Indarch enstatite chondrite have been reported, one luminescing blue and one red. Similar clinoenstatites in the Kota-Kota enstatite chondrite are associated with two distinct types of forsteritic olivine, one luminescing orange and the other blue. The textural relations and differences in chemical composition cannot be explained by progressive condensation from the solar nebula and require the mechanical mixing of material from at least two sources. It is suggested here that enstatite chondrites result from mechanical and chemical processes during aerodynamic sorting and gravitational settling of debris from a hot cloud of dust, liquid and gas produced during collision of planetesimals.

Leitch, C. A.↗

Physical characteristics of cometary dust from optical studies

Observations of the sunlight scattered and thermal emission from cometary dust, which may be used to infer the physical properties of the dust grains, are reviewed. Consideration is given to the observed wavelength dependence of the scattered light from cometary coma and tails, the average scattering function of the dust grains, the average grain Bond albedo, the polarization of the scattered light, and grain temperatures deduced from thermal infrared emission. The thermal properties of dust grains are illustrated for models based on magnetite or olivine grain materials, with consideration given to the variation of thermal properties with particle radius and heliocentric distance. Comparison of the models with observations indicates that a disordered or amorphous olivine composition can give a reasonable fit to the data for appropriate grain sizes and temperatures. The observations acquired are noted to indicate an optically important particle size of 1 micron, with silicate particles not larger than a few microns usually present although pure silicate grains can not be responsible for the thermal emission, and the cometary dust grains are most likely not spherical. Further observations needed in the infrared are indicated.

Hanner, M. S.↗

The Correo and Suwanee Spring meteorites - Two new ordinary chondrite finds

Two new ordinary chondrites were found about 40 km west of Albuquerque, New Mexico. Correo is an H4 chondrite with distinct chondrules and major olivine (Fo 81.4), orthopyroxene (En 82.3) and plagioclase (An 12). Suwanee Spring is an L5 chondrite with few distinct chondrules and a highly recrystallized matrix. Major minerals are olivine (Fo 75.4), orthopyroxene (En 77.7) and plagioclase (An 9). The metallic Ni-Fe phases of both meteorites are typical of slowly cooled ordinary chondrites.

Rubin, A. E.↗

Infrared spectroscopy of interplanetary dust in the laboratory

A mount containing three crushed chondritic interplanetary dust particles (IDPs) collected in the earth's stratosphere and subjected to infrared spectroscopic measurements shows features near 1000 and 500/cm, suggesting crystalline pyroxene rather than crystalline olivine, amorphous olivine, or meteoritic clay minerals. Chondritic IDP structural diversity and atmospheric heating effects must be considered when comparing this spectrum with interplanetary and cometary dust astrophysical spectra. TEM and infrared observations of one member of the rare subset of IDPs resembling hydrated carbonaceous chondrite matrix material shows a close infrared spectrum resemblance between 4000 and 400/cm to the C2 meteorite Murchison. TEM observations suggest that this class of particles may be used as an atmospheric entry heating-process thermometer.

Fraundorf, P.↗

Cristobalite-pyroxene in an L6 chondrite - Implications for metamorphism

CRISPY is a cristobalite-pyroxene assemblage in the L6 chondrite ALHA 76003. It was formed by reaction of a very siliceous inclusion with the surrounding olivine-rich rock. Oxygen isotopes show that the inclusion was derived from a source with non-chondritic isotopic composition. The isotopes also show that the oxygen of the pyroxene reaction product was derived by simple mixing of oxygen from the inclusion and its immediately adjacent surroundings, with exchange with the bulk meteorite limited to a distance of about a millimeter. The persistence of cristobalite in close proximity to olivine, and the lack of isotopic equilibration, show that the metamorphic processes that form petrographic grade 6 chondrites involve transport of major elements over distances only on the order of millimeters.

Olsen, E. J.↗

A synthesis of lunar highlands compositional data

Based on compositions of lunar soils and endogeneous highland rocks and mineral phase relationships, a composition for the non-KREEP, mafic portion of the lunar highlands is determined through the use of a mixing model. It is found that the most common materials making up the surface highlands appear to be ferroan anorthosite (FAN) and a material of olivine norite composition (HON, highlands olivine norite) in roughly equal proportions. It is also found that the composition of HON is similar to that of the residual liquid from crystallization of FAN and that the proportion of FAN to HON at the lunar surface appears to be much higher than the phase relations allow for the extent of evolution of HON from a primitive plagioclase-saturated liquid. This is seen as implying an excess of FAN in the upper highlands.

Korotev, R. L.↗

Metamorphism in mesosiderites

Previous studies of mesosiderites have identified a metamorphic overprint in these meteorites. However, the effects and implications of this overprint have not yet been explored in detail. The present study documents several important textural and chemical features of the mesosiderites. The components of mesosiderites are examined, taking into account orthopyroxenites, olivine in clasts, mesosiderite mafic clasts, and metal. The characteristics of the silicate matrix of the mesosiderites is explored, and textural and chemical evidence of metamorphism is discussed, giving attention to coronas on olivine clasts, overgrowths on Mg-pyroxene clasts, rims on iron rich pyroxene grains, poikiloblasts of plagioclase, and resorption of clasts. Aspects of redox formation of merrillite are considered along with the causes and the implications of metamorphism. It is found that metamorphism has radically changed the texture of the silicate fraction of the mesosiderites.

Delaney, J. S.↗

Petrology of dune sand derived from basalt on the Ka'u Desert, Hawaii

Dune sand from the Ka'u Desert, southwest flank of Kilauea volcano, Hawaii, is moderately well-sorted (median = 1.60 Phi, deviation = 0.60, skewness = 0.25, kurtosis = 0.68) and composed mostly of frosted subangular particles of basalt glass ('unfractionated' olivine-normative tholeitte), olivine, lithic fragments (subophitic and intersertal basalts; magnetite-ilmenite-rich basalts), reticular basalt glass, magnetite, ilmenite, and plagioclase, in approximately that order of abundance. Quantitative lithological comparison of the dune sand with sand-sized ash from the Keanakakoi Formation supports suggestions that the dune sand was derived largely from Keanakakoi ash. The dune sand is too well sorted to have been emplaced in its present form by base-surge but could have evolved by post-eruption reworking of the ash.

Gooding, J. L.↗

Electron microprobe analysis of trace elements in minerals at 10 PPM concentrations

An improved technique is developed for measuring backgrounds during trace element analysis of crystals and glass using electron microprobes. This technique overcomes major difficulties encountered with conventional techniques, such as the problem of obtaining the net X-ray intensity of the characteristic emission line of interest with sufficient precision and accuracy, as well as the error due to the inability to directly measure the intensity at the wavelength of the characteristic line on the sample being analyzed. It is shown that this technique can yield reproducible results to within 4 ppm in olivine, and has a minimum uncertainty and detection limit of 10 ppm Nd in olivine.

Mckay, G. A.↗

Further efforts to limit lunar internal temperatures from electrical conductivity determinations

A representative set of 18 electrical conductivity profiles consistent with lunar transfer function data in the 0.00001 to 0.001 Hz range is generated by means of a Monte Carlo procedure. Laboratory electrical conductivity vs temperature data extrapolated to lower and higher temperatures are used to convert the 18 profiles into temperature profiles for a series of radially homogeneous olivine-pyroxene mixtures ranging from 100% olivine to 100% aluminous orthopyroxene. The former yields selenotherms approaching the Ringwood-Essene solidus at depths near 500 km, while additions of the latter in concentrations greater than 15-30 vol% leads to cooler selenotherms which approach the solidus only at depths greater than about 1000 km. On the basis of independent geophysical constraints, the profile envelopes for compositions containing more than 15-30 vol% aluminous orthopyroxene are considered to be the most probable.

Hood, L. L.↗

Extinct I-129 in C3 chondrites

Eight C3 chondrites were examined by the I-129 to Xe-129 dating method to determine whether their initial I-129/I-127 ratios, or R(0), correlate with any other properties. The R(0)'s range from 1.60 x 10 to the -4th to 1.09 x 10 to the -4th, corresponding to I to Xe ages from 2.0 Myr before to 6.7 Myr after the Murchison magnetite. Three C30's have essentially indistinguishable R(0)'s, while a fourth is undatable. Four C3V's show a distinct spread, ranging from 1.60 + or 0.07 x 10 to the -4th to 1.09 + or - 0.10 x 10 to the -4th. These R(0)'s correlate inversely with four other properties: I, Br, and Cd content, olivine composition, both percent mean deviation, and proportion of iron-poor olivine grains. The simplest model that accounts for the correlations with R(0) involves mixing of two iodine components in the solar nebula, associated with gas and grains, respectively. The second, of lower I-129/I-127 ratio, predominated at later times and thus became enriched in late-formed meteorites.

Crabb, J.↗

Kinetic effects on trace element partitioning

A potential difficulty regarding the application of trace element abundance data to problems in igneous petrogenesis is related to the possibility that partitioning of trace elements among minerals and melt may not be an equilibrium process. It may rather be controlled by kinetic processes, specifically the interplay between crystal growth and diffusion of the trace elements in crystals and melt. The present investigation has the objective to quantify kinetic effects on trace element partitioning. Crystals of olivine, pyroxene, and plagioclase were grown rapidly from synthetic melts resembling naturally-occurring mafic melts and doped with La, Sm, and Lu to quantify the magnitude of the effect of crystal growth rate on concentration of excluded trace elements. Olivine melt partitioning failed to show any appreciable kinetic effects, while diopside/melt distribution coefficients increased by 70 percent when the crystals grew very rapidly.

Lindstrom, D. J.↗

Spectral chemistry of green glass-bearing 15426 regolith

The detection of appreciable concentrations of ferric iron in a synthetic green glass equilibrated at an oxygen fugacity of 10 to the -11th atm prompted a Moessbauer spectral study of pristine emerald-green glass spherules carefully handpicked from regolith sample 15426. No Fe(3+) ions were detected in this lunar sample or in a synthetic green glass simulant equilibrated at fO2 = 10 to the -14th atm, suggesting that the green glass clods in rock 15426 formed under conditions of correspondingly low oxygen fugacities. The Moessbauer spectra indicated the presence of olivine crystallites in the lunar emerald green glass spherules. Measurements of homogeneous and partially devitrified synthetic silicate glasses revealed that significant changes of coordination environment about Fe(2+) ions in the glass structure occur during crystallization of olivine crystals from the melt.

Burns, R. G.↗

Apollo 14 very low titanium glasses - Melting experiments in iron-platinum alloy capsules

This paper describes two techniques that have been developed to produce Fe-Pt alloy capsules for hgh-pressure experiments, and reports liquidus-phase relations of the Apollo 14 very low titanium glasses determined using Fe-rich capsules (a/Fe/ approximately 0.6). The liquid is multiply saturated with olivine and clinopyroxene at equal to or greater than 22 kbar. The multiple saturation is at least 3 kbar higher than that determined using pure Fe capsules and corresponds to a source region at least 60 km deeper if olivine and clinopyroxene were the residual phases. However, independent data on iron activity or oxygen fugacity of the glasses are still needed in order to choose a container of optimum composition. Preliminary experiments in Fe-poor alloy capsules suggest that the valence state of iron and the crystallization sequence in the melt have changed, possibly as a result of oxidizing materials entrapped during the iron-plating processes. The FeO content of the charge decreases linearly with increasing run duration in experiments using pure Fe capsules. The observation that iron-rich globules grow with time suggests that the equilibrium Fe (bleb) + Fe2O3 (liq) = 3 FeO (liq) might be established in the liquid at high pressure. If this explanation is correct, an appreciable amount of 'FeO' in the liquid could actually be Fe2O3, and some natural lunar volcanic glasses may contain ferric iron as well.

Chen, H.-K.↗

The composition of the mantle of the eucrite parent body and the origin of eucrites

Previous estimates of the composition of the EPB have tacitly assumed chondritic abundances of refractory LIL elements. A model is presented here which utilizes refractory element ratios instead. Consideration of these ratios and of known olivine-liquid partition coefficients for Sc, Mg and Si imply that the EPB mantle may be accurately modeled as a simple mixture of 25 percent eucrite + 75 percent olivine. The model also implies that eucrites such as Juvinas and Sioux County were derived by large degrees of partial melting (20-30 percent). Comparison of the model EPB mantle to known meteorite classes indicates a similarity between the element abundances of the EPB and C3 chondrites.

Jones, J. H.↗

The bulk-Moon MgO/FeO ratio: A highlands perspective

Compositional data for nonmare (highlands) samples suggest that the Moon's mg ratio (MgO/FeO) is higher than general estimates. Geochemically representative highlands soils have mg ratios of 0.66 (Apollo 16), 0.69 (Luna 20) and 0.73 (ALHA81005). These soils are mixtures of unrelated pristine nonmare rocks, of which there are at least three groups: Mg-rich rocks, ferroan anorthosites, and KREEP. Other than Mg-rich rocks, virtually all pristine rocks have mg 0.65. Thus, assuming the mixing process that sampled Mg-rich materials was random, the average mg of Mg-rich parent magmas was probably at least 0.70. More direct evidence can be derived from the Mg-rich rocks themselves. Nine of them have bulk-rock mg 0.87. Two (15445 A and 67435 PST) contain Fo(92) olivine. Production of melts that crystallized Fo(92) olivine implies that the mg ratios of source regions in lunar mantle were commensurably high. A quantification of this constraint is developed assuming that the parent melts formed by equilibrium (batch) partial melting. Implications of the model are discussed.

Warren, P. H.↗

The Colony meteorite and the possible existence of a new chemical subgroup of CO3 chondrites

The Colony meteorite, found in Oklahoma around 1975, has an unrecrystallized texture and contains heterogeneous olivine and low Ca pyroxene, kamacite with low Ni and Co and high Cr, amoeboid inclusions with low FeO and MnO, and numerous small chondrules with clear pink glass. These characteristics are shared by members of the least metamorphosed subgroup of CO3 chondrites. Colony contains a fine grained matrix that has higher FeO and K2O and lower MgO and Na2O than normal CO3 matrices. Allan Hills A77307 is another unmetamorphosed meteorite that has many petrologic similarities to normal CO chondrites, including matrix abundance, mineral compositions and chondrule size. However, it differs from them in its abundance of magnetite and presence of iron carbides. The olivine and low Ca pyroxene compositional distributions of Colony and A77307 are very similar. The shapes of the thermoluminescence glow curves of Colony and A77307 are very similar, but differ significantly from those of normal CO chondrites. It is suggested that Colony and A77307 represent a distinct chemical subgroup of CO3 chondrites, characterized by low Ni, Co, S, Ca, Mg, Mn and, possibly, high Cd.

Rubin, A. E.↗

Mineralogical comparison and cooling history of lunar and chondritic vesicular melt breccias

Lunar sample 77135, an impact melt breccia full of vesicles, has been reinvestigated by electron microprobe and X-ray diffraction techniques and compared with a vesicular melt LL chondrite, Yamato 790964, in an attempt to understand their impact heating processes and subsequent cooling history. Notable similarities between the lunar and chondritic melt breccias include: abundant vesicles, similar pyroxene chemical zoning trends, the presence of variable amounts of clastic material, and similar chemical compositions except for K and Na contents of glass and mesostasis. Some constraints on the cooling history are estimated from Mg-Fe diffusion profiles in olivine and pyroxene. The burial depth of lunar sample 77135 during cooling was 0.2-100 m; the depth for the chondrite was probably smaller. Impact melts were probably produced and a layer of regolith retained on the parent body sufficiently thick to allow the olivines to homogenize during slow cooling.

Miyamoto, M.↗