Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NATURAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Molecular and structural investigation of yukonite (synthetic & natural) and its relation to arseniosiderite

This paper describes the first synthesis method of yukonite, its thorough molecular and structural analysis along with natural specimens originating from Tagish Lake (Canada) and Grotta della Monaca (Italy) for comparison, and its structural relation to arseniosiderite. The synthetic and natural yukonites were found to have a range of composition according to the general formula Ca{sub 2}Fe{sub 3-5}(AsO{sub 4}){sub 3}(OH){sub 4-10} {center_dot} xH{sub 2}O where x = 2-11. The synthetic yukonite was found to be equivalent at the atomic, molecular and structural level to the Tagish Lake yukonite. At the molecular level, arseniosiderite, via vibrational spectroscopy, was found to have a H-bonding system as in scorodite and exhibit an extra arsenate mode indicative of groups. Heating experiments along with ATR-IR analysis indicated the presence of structural water and hydroxyl units in arseniosiderite. In yukonite in contrast, a wide diffuse H-bonding environment was observed with only arsenate groups. The presence of both structural water and hydroxyl groups was further verified via ATR-IR spectroscopy. The As K, Fe 2p and Ca 2p XANES spectra of yukonite and arseniosiderite were found to be identical, confirming that the local nature of the As, Fe and Ca atoms in these structures is the same. Diffraction analysis (X-ray and electron) showed that yukonite consist of nano-crystalline domains while in the case of arseniosiderite micro-size single crystal domains exist.

36 MATERIALS SCIENCE↗

Optimal Energy Control of a Dual Fuel Vehicle Fuelled by Natural Gas and E10

Due to the increasing availability of natural gas, there is growing interest in using this fuel for transportation. Utilizing natural gas along with gasoline can provide a way to leverage the high knock resistance of natural gas while avoiding some of the ignitability challenges of this fuel. This paper leverages experimental data for a single cylinder engine to model power production on a mid-size sedan. Using this model, an optimal energy management strategy is explored. Several weighting strategies are considered including techniques which consider fuel availability, fuel cost, and carbon emissions. The effectiveness of these methods are considered over the UDDS, HWY, and US06 cycles. While there is little benefit to such a fuel blending algorithm at low loads, at high loads (such as those encountered in the US06 cycle) blending can provide up to a 7% improvement in efficiency.

Control and diagnosis of automotive systems↗

Natural Oil-Based Emulsion Containing Allantoin Versus Aqueous Cream for Managing Radiation-Induced Skin Reactions in Patients With Cancer: A Phase 3, Double-Blind, Randomized, Controlled Trial

Purpose: To investigate the effects of a natural oil-based emulsion containing allantoin versus aqueous cream for preventing and managing radiation-induced skin reactions. Methods and Materials: A total of 174 patients were randomized and participated in the study. Patients received either cream 1 (the natural oil-based emulsion containing allantoin) or cream 2 (aqueous cream). Skin toxicity, pain, itching, and skin-related quality of life scores were collected for up to 4 weeks after radiation treatment. Results: Patients who received cream 1 had a significantly lower average level of Common Terminology Criteria for Adverse Events at week 3 (P<.05) but had statistically higher average levels of skin toxicity at weeks 7, 8, and 9 (all P<.001). Similar results were observed when skin toxicity was analyzed by grades. With regards to pain, patients in the cream 2 group had a significantly higher average level of worst pain (P<.05) and itching (P=.046) compared with the cream 1 group at week 3; however, these differences were not observed at other weeks. In addition, there was a strong trend for cream 2 to reduce the incidence of grade 2 or more skin toxicity in comparison with cream 1 (P=.056). Overall, more participants in the cream 1 group were required to use another topical treatment at weeks 8 (P=.049) and 9 (P=.01). Conclusion: The natural oil-based emulsion containing allantoin seems to have similar effects for managing skin toxicity compared with aqueous cream up to week 5; however, it becomes significantly less effective at later weeks into the radiation treatment and beyond treatment completion (week 6 and beyond). There were no major differences in pain, itching, and skin-related quality of life. In light of these results, clinicians and patients can base their decision on costs and preferences. Overall, aqueous cream seems to be a more preferred option.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Natural element method for radiative heat transfer in a semitransparent medium with irregular geometries

This paper develops a numerical solution to the radiative heat transfer problem coupled with conduction in an absorbing, emitting and isotropically scattering medium with the irregular geometries using the natural element method (NEM). The walls of the enclosures, having temperature and mixed boundary conditions, are considered to be opaque, diffuse as well as gray. The NEM as a meshless method is a new numerical scheme in the field of computational mechanics. Different from most of other meshless methods such as element-free Galerkin method or those based on radial basis functions, the shape functions used in NEM are constructed by the natural neighbor interpolations, which are strictly interpolant and the essential boundary conditions can be imposed directly. The natural element solutions in dealing with the coupled heat transfer problem for the mixed boundary conditions have been validated by comparison with those from Monte Carlo method (MCM) generated by the authors. For the validation of the NEM solution to radiative heat transfer in the semicircular medium with an inner circle, the results by NEM have been compared with those reported in the literatures. For pure radiative transfer, the upwind scheme is employed to overcome the oscillatory behavior of the solutions in some conditions. The steady state and transient heat transfer problem combined with radiation and conduction in the semicircular enclosure with an inner circle are studied. Effects of various parameters such as the extinction coefficient, the scattering albedo, the conduction–radiation parameter and the boundary emissivity are analyzed on the radiative and conductive heat fluxes and transient temperature distributions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation of MO x (M = Cr, Mn, Re, and Mo) coated stainless-steel electrodes for oxygen evolution reaction in natural seawater electrolysis

Seawater electrolysis is considered a potential strategy for large-scale of affordable H 2 production. However, poor durability of the anode for oxygen evolution reaction (OER) in natural seawater is a remaining concern due to chloride-induced reaction. Herein, the effect of various MO x (M = Mn, Cr, Re, and Mo) coated stainless steel (SS) electrodes on OER in direct natural seawater electrolysis was comprehensively studied. It is found that the Mo-coated SS electrode is superior to all others in terms of durability, followed by Re-coated SS, while the Cr and Mn-coated SS electrodes show the poorest durability. Additionally, the durability and activity of the Mo/SS electrode can be boosted remarkably in 1 M KOH/seawater compared to the natural seawater, resulting in an overpotential at 10 mA cm −2 decrease from 830 to 399 mV. Meanwhile, no degradation is observed at 1000 mA cm −2 for 100 h in 1 M KOH seawater, which is among the best stability, based on the literature review. Moreover, the improved durability and activity with Mo coating were extended to the Inconel 718 substrate, and around 40 % improvement in durability and 25 mV overpotential decrease at 10 mA cm −2 are observed, which indicates that Mo coating can be considered as a universal approach to improve the anode durability and activity. The improved performance with Mo coating may be attributed to the continuous Mo oxide layer formation or in situ generated MoO 4 2− in the OER process. In conclusion, this work provides a holistic strategy to enhance the anode durability and activity under harsh conditions, offering valuable insights for designing corrosion-resistant electrodes in direct seawater electrolysis.

Direct seawater electrolysis↗

Phosphate adsorption kinetics and equilibria on natural iron and manganese oxide composites

We report that it is well known that phosphate retention in soils and sediments is strongly influenced by binding to secondary iron oxides, there have been relatively few studies examining its adsorption/desorption behavior on multicomponent particles of realistic natural complexity. In this study, natural Mn-rich limonite (LM), was used to prepare naturally complex Fe- and Mn-oxide composite materials to examine phosphate adsorption/desorption. To clarify the role of the Mn-oxides, results for the LM sample were compared to those for an acid treated version (LAT), in which the acid-extractable Mn-oxide fraction has been selectively eliminated while leaving the Fe-oxide fraction intact. The saturated adsorption capacity on LAT was almost double that on LM, suggesting that phosphate adsorption to the iron oxides is strongly occluded by the Mn-oxide fraction. This result is reinforced by the comparing the pH dependence and fits to adsorption isotherms, and by desorption experiments and STEM-EDS mapping showing that phosphate loading on Mn-oxides was limited. Hence, although the collective results confirm that phosphate uptake and strong binding is selectively controlled by the Fe-oxide fraction, our study reveals that the Mn-oxide fraction strongly interferes with this process. Therefore, phosphate uptake behavior on metal oxides cannot be predicted solely on the basis of the Fe-oxide fraction present, but instead must take into account the deleterious impacts of other intimately associated phases. For co-diagenetic Fe/Mn-oxide composites in particular, Mn-oxides appear to severely limit phosphate uptake on the Fe-oxide fraction, either by hindering access to binding sites on the Fe-oxide or by lowering their affinity for P.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Natural isotopic compositions of titanium, iron, and nickel observed in commercial fuel pellets – Promising candidate elements for stable isotope tagging

Stable isotope taggants would constitute unique identifiers for nuclear fuel cycle materials, resulting in expedited timelines and high confidence provenance assessments for nuclear forensics investigations. However, reliably identifying and interpreting stable isotope taggants in nuclear materials recovered from outside of regulatory control will largely be predicated on the assumption that the taggant element intrinsic to the untagged nuclear material exhibits natural isotopic ratios. Here, we present high-precision Ti, Fe, and Ni isotope compositions in 13 commercial low-enriched uranium (LEU) fuel pellets to assess the suitability of these transition metals as stable isotope taggants. Our investigations reveal limited isotope variations among the fuel pellets in all three elements, which are consistent with small mass-dependent isotope fractionations, comparable to variations previously reported for natural samples. In practice, isotopically tagged nuclear materials are expected to fall along isotopic mixing lines, since intrinsic background levels of taggant elements dilute the taggant towards natural isotope compositions. Furthermore, the observation that Ti, Fe, and Ni isotope compositions in a suite of LEU fuel pellets are close to or indistinguishable from estimates for the Bulk Silicate Earth demonstrates that a two end-member mixing assumption would be valid for these transition metals, indicating that all three are promising candidate elements for stable isotope tagging. Finally, we present mass balance calculations to quantify isotopic perturbations expected from admixing isotopically anomalous Ti, Fe, and Ni taggants to assess the interplay between elemental and taggant concentrations and find favorable compromises for facilitating successful taggant identification with current analytical methods.

Intentional forensics↗

A naturally-occurring new lead-based halocuprate(I)

Pb{sub 2}Cu(OH){sub 2}I{sub 3} is a new type of halocuprate(I) that is a framework of alternating [Pb{sub 4}(OH){sub 4}]{sup 4+} and [Cu{sub 2}I{sub 6}{sup ]4−} units. The structure has been determined in orthorhombic space group Fddd to R{sub 1}=0.037, wR{sub 2}=0.057, GoF=1.016. Unit cell parameters are a=16.7082(9) Å, b=20.8465(15) Å, c=21.0159(14) Å, V=7320.0(8) Å{sup 3} (Z=32). There is no synthetic counterpart. The structure is based upon a cubane-like Pb{sub 4}(OH){sub 4} nucleus that is coordinated to sixteen iodide ions. Cu{sup +} ions are inserted into pairs of adjacent edge-sharing tetrahedral sites in the iodide motif to form [Cu{sub 2}I{sub 6}]{sup 4-} groups. The Raman spectrum of Pb{sub 2}Cu(OH){sub 2}I{sub 3} has two O-H stretching modes and as such is consistent with space group Fddd, with two non-equivalent OH groups, rather than the related space group I4{sub 1}/acd which has only one non-equivalent OH group. Consideration of the 18-electron rule implies that there is a Cu=Cu double bond, which may be consistent with the short Cu…Cu distance of 2.78 Å, although the dearth of published data on the interpretation of Cu…Cu distances in halocuprate(I) compounds does not allow a clear-cut interpretation of this interatomic distance. The orthorhombic structure is compared with that of the synthetic halocuprate(I) compound Pb{sub 2}Cu(OH){sub 2}BrI{sub 2} with space group I4{sub 1}/acd and having chains of corner-linked CuI{sub 4} tetrahedra rather than isolated Cu{sub 2}I{sub 6} pairs. The paired motif found in Pb{sub 2}Cu(OH){sub 2}I{sub 3} cannot be achieved in space group I4{sub 1}/acd and, conversely, the chain motif cannot be achieved in space group Fddd. As such, the space group defines either a chain or an isolated-pair motif. The existence of Pb{sub 2}Cu(OH){sub 2}I{sub 3} suggests a new class of inorganic halocuprate(I)s based upon the Pb{sub 4}(OH){sub 4} group. - Graphical abstract: Projection onto (100) of the structure of the natural halocuprate(I) Pb{sub 2}Cu(OH){sub 2}I{sub 3} showing the chequerboard alternation of cubane-like [Pb{sub 4}(OH){sub 4}]{sup 4+} and non-polymerised [Cu{sub 2}I{sub 6}]{sup 4−} groups. Pb atoms are black spheres, oxygen atoms are red spheres, iodine atoms are mauve spheres and Cu{sub 2}I{sub 6} groups are shown as paired edge-sharing blue tetrahedra. Display Omitted - Highlights: • A naturally-occurring new inorganic halocuprate(I). • The first natural halocuprate(I). • New structure topology based upon [Pb{sub 4}(OH){sub 4}]{sup 4+} and [Cu{sub 2}I{sub 6}]{sup 4−} groups. • Comparison with synthetic halocuprates suggests tailoring of topology via halogen composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanical property evaluation of natural fiber coir composite

The fiber which serves as a reinforcement in reinforced plastics may be synthetic or natural. Past studies show that only artificial fibers such as glass, carbon etc., have been used in fiber-reinforced plastics. Although glass and other synthetic fiber-reinforced plastics possess high specific strength, their fields of application are very limited because of their inherent higher cost of production. In this connection, an investigation has been carried out to make use of coir, a natural fiber abundantly available in India. Natural fibers are not only strong and lightweight but also relatively very cheap. In the present work, coir composites are developed and their mechanical properties are evaluated. Scanning electron micrographs obtained from fractured surfaces were used for a qualitative evaluation of the interfacial properties of coir/epoxy and compared with glass fiber/epoxy. These results indicate that coir can be used as a potential reinforcing material for making low load bearing thermoplastic composites.

36 MATERIALS SCIENCE↗

From natural attapulgite to phosphor materials: Characterization, photoluminescence and structure

Highlights: • Sr{sub 2.965}Al{sub 0.08}Si{sub 0.92}O{sub 5}:0.025Ce{sup 3+}, 0.01Eu{sup 2+} phosphor was synthesized from natural attapulgite. • Pure Sr{sub 3}SiO{sub 5} phase can be easily obtained. • It provides a new application field as phosphor for natural attapulgite. - Abstract: Sr{sub 2.965}Al{sub 0.08}Si{sub 0.92}O{sub 5}:0.025Ce{sup 3+}, 0.01Eu{sup 2+} (SrAlSiO:Ce{sup 3+}, Eu{sup 2+}) phosphor from natural attapulgite (ATP) was synthesized by solid-state reaction method. For the use of ATP as a source of Si and Al, pretreatment process including mechanical grinding and acid leaching were involved. X-ray diffraction patterns confirmed the formation of silicates in a wide temperature field, whereas Sr{sub 3}SiO{sub 5} within a single step. The ATP fibers were tuning into phosphor particles (about 1.5–3.0 μm) after calcination. Furthermore, photoluminescence spectra of the SrAlSiO:Ce{sup 3+}, Eu{sup 2+} phosphor was also in good agreement with the literature results, indicating a promising potential application as an effective candidate for warm-white LEDs materials.

36 MATERIALS SCIENCE↗

Characterisation of reduced graphene oxides prepared from natural flaky, lump and amorphous graphites

Highlights: • Natural flaky, lumpy and amorphous graphites were used to synthesis rGO. • Investigation the effect of the crystal morphology on the oxidation process of GrO and characteristics of prepared rGO. • Low graphitisation degree, big specific surface area and small lateral size were beneficial to the oxidation of graphite. - Abstract: The characterisation of reduced graphene oxides (rGOs) prepared from natural flaky, lumpy, and amorphous graphites using Hummers method was investigated. The prepared graphite oxides (GrOs) and rGOs were characterised by X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, UV–vis spectroscopy, atomic force microscopy and electrochemical performance. The results showed that amorphous graphite was much easier to oxidise than lumpy and flaky graphites and was preferable for preparing single or double layer graphene because low graphitisation degree, high defect degree, high specific surface area and small crystal size were beneficial for (1) the oxidants to attack the exposed carbon atoms, (2) the intercalation of oxidants, and (3) the diffusion of oxidants between graphitic layers. In addition, rGO synthesised from amorphous graphite had the most defects and the smallest size of the in-plane sp{sup 2} domains compared to those obtained from the other two nature graphites.

36 MATERIALS SCIENCE↗

Penetrant competition and plasticization in membranes: How negatives can be positives in natural gas sweetening

Membranes are attractive for upgrading natural gas; however, the gas permeation processes through membranes are challenging to control. The coexistence of condensable H 2 S and CO 2 typically causes membrane performance to decline under practical feed conditions, due to uncontrolled penetrant competition and undesired plasticization of the membrane polymer matrix. In this paper, we report a strategy to successfully transform these apparent negatives, i.e. plasticization and penetrant competition, into positives that boost the natural gas sweetening efficiency of membranes greatly. Our strategy is to disperse engineered metal organic framework (MOF) fillers into designed polymer matrices to form hybrid membranes, which promote the permeation of both H 2 S and CO 2 but hinder CH 4 permeation. Moreover, uniformly dispersed MOF fillers also significantly alter the plasticization responses of polymer matrices, enabling controlled plasticization benefits. Ultimately, we illustrate a highly tunable MOF-polymer hybrid membrane platform that meets the diverse natural gas sweetening requirements under aggressive conditions.

36 MATERIALS SCIENCE↗

Synthesis of PHI-type zeolite harmotome using barium as an inorganic structure-directing agent inspired from natural mineral compositions

Zeolites are nanoporous aluminosilicates widely used as commercial adsorbents, heterogeneous catalysts, and ion-exchange materials due to their unique porosity, acidity, and thermal stability. The vast majority of synthetically-realized zeolite structures are prepared under hydrothermal conditions in alkaline media, and often in the presence of an organic structure-directing agent that facilitates the crystallization of diverse porous networks. Due to economic and environmental disadvantages of organic-based syntheses, it is often desirable to produce zeolites in organic-free media using alkali metal ions as the most commonly employed inorganic structure-directing agents (ISDAs). Here, in this study, we were inspired by the elemental compositions of natural zeolite minerals to examine the use of an alkaline earth metal ion as the ISDA to prepare zeolites with the PHI framework type. Two natural minerals exhibiting this crystal structure are phillipsite and harmotome. Both structures contain sodium and potassium as extra-framework cations, but only harmotome contains barium cations. Here we examined how the combination of alkali and alkaline earth ISDAs promote the formation of PHI-type zeolites. Our findings reveal that each isostructure is prepared under different synthesis conditions where simply adding barium to a growth mixture does not always lead to harmotome formation. Harmotome is formed in more dilute and alkaline growth media; however, time-resolved analyses of zeolite crystallization reveal that harmotome can be synthesized at low temperatures (ca. 65 °C) with rates that are 5-times faster than syntheses of phillipsite. This seemingly indicates that barium reduces the energetic barrier for PHI-type zeolite nucleation in ways that are not fully understood. Moreover, harmotome crystals exhibit an average particle size of ca. 60 nm, which is nearly 40-fold smaller than phillipsite crystals prepared under similar conditions. Collectively, these findings identify routes to control crystallization of PHI-type zeolites and may provide a broader strategy for using the composition of natural zeolite minerals to optimize the preparation of synthetic analogues.

36 MATERIALS SCIENCE↗

Two natural products, trans-phytol and (22E)-ergosta-6,9,22-triene-3β,5α,8α-triol, inhibit the biosynthesis of estrogen in human ovarian granulosa cells by aromatase (CYP19)

Aromatase is the only enzyme in vertebrates to catalyze the biosynthesis of estrogens. Although inhibitors of aromatase have been developed for the treatment of estrogen-dependent breast cancer, the whole-body inhibition of aromatase causes severe adverse effects. Thus, tissue-selective aromatase inhibitors are important for the treatment of estrogen-dependent cancers. In this study, 63 natural products with diverse structures were examined for their effects on estrogen biosynthesis in human ovarian granulosa-like KGN cells. Two compounds—trans-phytol (SA-20) and (22E)-ergosta-6,9,22-triene-3β,5α,8α-triol (SA-48)—were found to potently inhibit estrogen biosynthesis (IC{sub 50}: 1 μM and 0.5 μM, respectively). Both compounds decreased aromatase mRNA and protein expression levels in KGN cells, but had no effect on the aromatase catalytic activity in aromatase-overexpressing HEK293A cells and recombinant expressed aromatase. The two compounds decreased the expression of aromatase promoter I.3/II. Neither compound affected intracellular cyclic AMP (cAMP) levels, but they inhibited the phosphorylation or protein expression of cAMP response element-binding protein (CREB). The effects of these two compounds on extracellular regulated kinase (ERK), c-Jun N-terminal kinase (JNK), p38 mitogen-activated protein kinases (MAPKs), and AKT/phosphoinositide 3-kinase (PI3K) pathway were examined. Inhibition of p38 MAPK could be the mechanism underpinning the actions of these compounds. Our results suggests that natural products structurally similar to SA-20 and SA-48 may be a new source of tissue-selective aromatase modulators, and that p38 MAPK is important in the basal control of aromatase in ovarian granulosa cells. SA-20 and SA-48 warrant further investigation as new pharmaceutical tools for the prevention and treatment of estrogen-dependent cancers. - Highlights: • Two natural products inhibited estrogen biosynthesis in human ovarian granulosa cells. • They inhibited aromatase transcription without affecting its catalytic activity. • They decreased the transcription or protein expression of CREB. • They inhibited p38 MAPK to exert their inhibitory effects on aromatase expression.

60 APPLIED LIFE SCIENCES↗

Plastic waste to liquid oil through catalytic pyrolysis using natural and synthetic zeolite catalysts

Highlights: • Liquid fuel was produced from plastic waste through catalytic pyrolysis. • Pyrolysis of polystyrene plastic produced highest liquid oil yield of 54% using natural zeolite. • Pyrolysis liquid oil mainly consisted of aromatic hydrocarbons with a few aliphatic compounds. • Primary compounds in liquid oil were styrene, ethylbenzene, benzene, azulene, and naphthalene. • Liquid oil had high heating values (HHV) of 40.2–45 MJ/kg. - Abstract: This study aims to examine the catalytic pyrolysis of various plastic wastes in the presence of natural and synthetic zeolite catalysts. A small pilot scale reactor was commissioned to carry out the catalytic pyrolysis of polystyrene (PS), polypropylene (PP), polyethylene (PE) and their mixtures in different ratios at 450 °C and 75 min. PS plastic waste resulted in the highest liquid oil yield of 54% using natural zeolite and 50% using synthetic zeolite catalysts. Mixing of PS with other plastic wastes lowered the liquid oil yield whereas all mixtures of PP and PE resulted in higher liquid oil yield than the individual plastic feedstocks using both catalysts. The GC–MS analysis revealed that the pyrolysis liquid oils from all samples mainly consisted of aromatic hydrocarbons with a few aliphatic hydrocarbon compounds. The types and amounts of different compounds present in liquid oils vary with some common compounds such as styrene, ethylbenzene, benzene, azulene, naphthalene, and toluene. The FT-IR data also confirmed that liquid oil contained mostly aromatic compounds with some alkanes, alkenes and small amounts of phenol group. The produced liquid oils have high heating values (HHV) of 40.2–45 MJ/kg, which are similar to conventional diesel. The liquid oil has potential to be used as an alternative source of energy or fuel production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic Structure of Naturally Occurring Aromatic Carbon

Aromatic carbon in fused-ring systems can be classified into two forms of electronic structure: aromatic sextets, which have large highest occupied molecular orbital (HOMO)–lowest unoccupied molecular orbital (LUMO) gaps and resemble benzene; and isolated double bonds, which have small HOMO–LUMO gaps and resemble olefins. The relative abundance of aromatic sextets versus isolated double bonds in mixtures can be probed by carbon X-ray Raman spectroscopy. Here, we report the carbon X-ray Raman spectra of a wide variety of forms of naturally occurring aromatic carbon: kerogen (insoluble organic carbon in sedimentary rocks, which is the most abundant form of naturally occurring organic carbon in the Earth’s crust) over a range of types and thermal maturities, fresh materials of a variety of forms, and coal and petroleum asphaltenes (toluene soluble and heptane insoluble materials, which represent organic carbon resulting from extensive thermal processing). It is observed that all these materials are dominated by aromatic sextets over isolated double bonds. On the basis of the diversity of materials analyzed, it is concluded that naturally occurring organic carbon is generally dominated by aromatic sextets over isolated double bonds. This conclusion is rationalized in terms of statistical and thermodynamic effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Se Isotopes as groundwater redox indicators: Detecting natural attenuation of Se at an in situ recovery U mine

One of the major ecological concerns associated with the in situ recovery (ISR) of uranium (U) is the environmental release of soluble, toxic selenium (Se) oxyanions generated by mining. Post-mining natural attenuation by the residual reductants in the ore body and reduced down-gradient sediments should mitigate the risk of Se contamination in groundwater. Here in this work, we investigate the Se concentrations and Se isotope systematics of groundwater and of U ore bearing sediments from an ISR site at Rosita, TX, USA. Our results show that selenate (Se(VI)) is the dominant Se species in Rosita groundwater, and while several up-gradient wells have elevated Se(VI), the majority of the ore zone and down-gradient wells have little or no Se oxyanions. In addition, the δ 82 SeVI of Rosita groundwater is generally elevated relative to the U ore up to +6.14‰, with the most enriched values observed in the ore-zone wells. Increasing δ 82 Se with decreasing Se(VI) conforms to a Rayleigh type distillation model with an ε of $-$2.25‰ ± 0.61‰, suggesting natural Se(VI) reduction occurring along the hydraulic gradient at the Rosita ISR site. Moreover, our results show that Se isotopes are excellent sensors for detecting and monitoring post-mining natural attenuation of Se oxyanions at ISR sites.

54 ENVIRONMENTAL SCIENCES↗

Synthesis of Cycloprodigiosin Identifies the Natural Isolate as a Scalemic Mixture

We prepared the enantiomers of the natural product cycloprodigiosin using an expedient five-step synthetic sequence that takes advantage of a Schöllkopf–Barton–Zard (SBZ) pyrrole annulation with a chiral isocyanoacetate and a nitrocyclohexene derivative. Using chiral HPLC and X-ray crystallographic analyses of the synthetically prepared material and natural isolate (isolated from the marine bacterium Pseudoalteromonas rubra), naturally occurring cycloprodigiosin was determined to be a scalemic mixture occurring in an enantiomeric ratio of 83:17 (R)/(S) at C4'.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗