Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “N”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Analysis of faults in an N-version software experiment

The authors have conducted a large-scale experiment in N-version programming. A total of 27 versions of a program were prepared independently from the same specification at two universities. The results of executing the versions revealed that the versions were individually extremely reliable but that the number of input cases in which more than one failed was substantially more than would be expected if they were statistically independent. After the versions had been executed, the failures of each version were examined and the associated faults located. The analysis showed that in some cases the programmers made equivalent logical errors, indicating that some parts of the problem were simply more difficult than others. The authors also found cases in which apparently different logical errors yielded faults that caused statistically correlated failures, indicating that there are special cases in the input space that present difficulty in various parts of the solution. A formal model is presented to explain this phenomenon. It appears that minor differences in the software development environment would not have a major impact in reducing the incidence of faults that cause correlated failures.

Brilliant, Susan S.↗

SAGE II observations of polar stratospheric clouds near 50 deg N January 31 - February 2, 1989

Polar stratospheric clouds (PSCs) form at very cold temperatures which typically occur only at high latitudes during local winter. However, meteorological circumstances in the Arctic during late January 1989 led to PSC formation unusually far to the south, at latitudes (near 50 deg N) being sampled during the period by the orbiting SAGE II instrument. These unusual PSC sightings and the evolution of meteorological conditions which produced the episode are described. Profiles of SAGE II extinction measurements at 0.525 and 1.02 microns show clear signatures of PSCs and indicate that the cloud particles were considerably larger than the background aerosol. It is most important to note that the clouds were sighted at a latitude where there was extensive sunlight, thus increasing the likelihood of ozone loss both locally and downstream due to enhancements in reactive chlorine expected from heterogeneous chemical processing within the PSCs.

Pitts, M. C.↗

Effect of Ga and P dopants on the thermoelectric properties of n-type SiGe

The purpose of this study was to hot-press improved n-type Si80Ge20/GaP samples directly (without any heat treatment) and to confirm that a Ga/P ratio less than one increases the solubility of P and, hence, improves the power factor and Z. One of the three samples (Ga/P = 0.43) had an improvement in Z of about 20 percent between 400 and 1000 C over that for standard SiGe. This demonstrates that improved samples can be pressed directly and that a Ga/P ratio less than one is necessary. The other two samples (Ga/P = 0.33 and 0.50) had Z's equal to or less than that of standard SiGe but had a lower hot-pressing temperature than the improved sample.

Draper, S. L.↗

Molecular arrangements and conformations of liquid n-tridecane chains confined between two hard walls

Monte Carlo simulations based on united CH2 atoms linked with fixed bond lengths and angles, and continuously varying torsional angles subject to appropriate interaction energies, were used to study liquid n-tridecane chains confined between two parallel hard walls with 5 mm separation. The molecules located in the central region are noted to be in very close agreement with ideal unperturbed chains. Nearly all the chain units in the first segmental layer adjacent to the walls belong to two-dimensional chains, and exhibit considerable orientational correlations between neighboring segments of different chains.

Vacatello, Michele↗

Reflecting boundary conditions for graded p-n junctions

In a graded junction, the formalism for handling reflecting boundary conditions must be modified. Since a significant drift term is present, zero recombination velocity at the surface does not imply a zero excess carrier gradient but rather zero overall flux. A model for analyzing p-n junctions fabricated by implantation or diffusion is presented, assuming the dominant recombination mechanism in the graded region is Auger. The model enables optimization of diode design. By proper selection of parameters, mainly by reducing surface concentration or by increasing the steepness of the dopant profile, it is possible to drastically reduce the saturation current generated by the graded region.

Schacham, S. E.↗

Experimental validation of Order (n) DISCOS

An order (n) algorithm is developed for use in the industry-standard DISCOS (Dynamics Interaction Simulation of Controls and Structures) program for flexible multibody system dynamics simulation. This version should be more computationally efficient than conventional DISCOS for problems where a large number of bodies are involved. Program-dependent changes to DISCOS are described for reducing the number of bodies required to model gear reduction and nonlinear stiffness as internal effects. The gear reduction modification can be extended to general applications, such as gear box, rack and pinion, lever joint, and screw rotation models. Upgrading DISCOS for future use include the addition of robotics capabilities such as event-driven topology changes, surface sliding, pick-and-place, and multiarm hand-off.

Chun, Hon M.↗

Correlations between the interfacial chemistry and current-voltage behavior of n-GaAs/liquid junctions

Correlations between the surface chemistry of etched, (100) oriented n-GaAs electrodes and their subsequent photoelectrochemical behavior have been probed by high-resolution X-ray photoelectron spectroscopy. GaAs photoanodes were chemically treated to prepare either an oxide-free near stoichiometric surface, a surface enriched in zero-valent arsenic or a substrate-oxide terminated surface. The current-voltage (I-V) behavior of each surface type was subsequently monitored in contact with several electrolytes.

Tufts, Bruce J.↗

N-(3-ethynylphenyl)maleimide

Acetylene terminated aspartimides are prepared using two methods. In the first, an amino-substituted aromatic acetylene is reacted with an aromatic bismaleimide in a solvent of glacial acetic acid and/or m-cresol. In the second method, an aromatic diamine is reacted with an ethynyl containing maleimide, such as N-(3-ethynylphenyl) maleimide, in a solvent of glacial acetic acid and/or m-cresol. In addition, acetylene terminated aspartimides are blended with various acetylene terminated oligomers and polymers to yield composite materials exhibiting improved mechanical properties.

Hergenrother, Paul M.↗

Surface and implantation effects on p-n junctions

The contribution of the graded region of implanted p-n junctions is analyzed using an exponential profile. Though previously neglected, it was recently shown that this contribution to the saturation current of HgCdTe diodes is significant. Assuming a dominant Auger recombination, an analytical solution to the continuity equation is obtained. An expression for the current generation by the graded region is presented for both ohmic and reflecting boundary conditions. A revised condition for a wide region is derived. When the region is narrow, the current differs drastically from that of the zero-gradient case. The effects of the junction depth and the substrate and surface concentrations on the current are investigated. It is shown that the reverse current does not saturate.

Schacham, Samuel E.↗

Investigation of anodic and chemical oxides grown on p-type InP with applications to surface passivation for n(+)-p solar cell fabrication

Most of the previously reported InP anodic oxides were grown on a n-type InP with applications to fabrication of MISFET structures and were described as a mixture of In2O3 and P2O5 stoichiometric compounds or nonstoichiometric phases which have properties similar to crystalline compounds In(OH)3, InPO4, and In(PO3)3. Details of the compositional change of the anodic oxides grown under different anodization conditions were previously reported. The use of P-rich oxides grown either by anodic or chemical oxidation are investigated for surface passivation of p-type InP and as a protective cap during junction formation by closed-ampoule sulfur diffusion. The investigation is based on but not limited to correlations between PL intensity and X-ray photoelectron spectroscopy (XPS) chemical composition data.

Faur, Maria↗

A nonrecursive order N preconditioned conjugate gradient: Range space formulation of MDOF dynamics

While excellent progress has been made in deriving algorithms that are efficient for certain combinations of system topologies and concurrent multiprocessing hardware, several issues must be resolved to incorporate transient simulation in the control design process for large space structures. Specifically, strategies must be developed that are applicable to systems with numerous degrees of freedom. In addition, the algorithms must have a growth potential in that they must also be amenable to implementation on forthcoming parallel system architectures. For mechanical system simulation, this fact implies that algorithms are required that induce parallelism on a fine scale, suitable for the emerging class of highly parallel processors; and transient simulation methods must be automatically load balancing for a wider collection of system topologies and hardware configurations. These problems are addressed by employing a combination range space/preconditioned conjugate gradient formulation of multi-degree-of-freedom dynamics. The method described has several advantages. In a sequential computing environment, the method has the features that: by employing regular ordering of the system connectivity graph, an extremely efficient preconditioner can be derived from the 'range space metric', as opposed to the system coefficient matrix; because of the effectiveness of the preconditioner, preliminary studies indicate that the method can achieve performance rates that depend linearly upon the number of substructures, hence the title 'Order N'; and the method is non-assembling. Furthermore, the approach is promising as a potential parallel processing algorithm in that the method exhibits a fine parallel granularity suitable for a wide collection of combinations of physical system topologies/computer architectures; and the method is easily load balanced among processors, and does not rely upon system topology to induce parallelism.

Kurdila, Andrew J.↗

Experimental and analytical comparison of flowfields in a 110 N (25 lbf) H2/O2 rocket

A gaseous hydrogen/gaseous oxygen 110 N (25 lbf) rocket was examined through the RPLUS code using the full Navier-Stokes equations with finite rate chemistry. Performance tests were conducted on the rocket in an altitude test facility. Preliminary parametric analyses were performed for a range of mixture ratios and fuel film cooling pcts. It is shown that the computed values of specific impulse and characteristic exhaust velocity follow the trend of the experimental data. Specific impulse computed by the code is lower than the comparable test values by about two to three percent. The computed characteristic exhaust velocity values are lower than the comparable test values by three to four pct. Thrust coefficients computed by the code are found to be within two pct. of the measured values. It is concluded that the discrepancy between computed and experimental performance values could not be attributed to experimental uncertainty.

Reed, Brian D.↗

Temperature coefficients and radiation induced DLTS spectra of MOCVD grown n(+)p InP solar cells

The effects of temperature and radiation on n(+)p InP solar cells and mesa diodes grown by metallorganic chemical vapor deposition (MOCVD) were studied. It was shown that MOCVD is capable of consistently producing good quality InP solar cells with Eff greater than 19 percent which display excellent radiation resistance due to minority carrier injection and thermal annealing. It was also shown that universal predictions of InP device performance based on measurements of a small group of test samples can be expected to be quite accurate, and that the degradation of an InP device due to any incident particle spectrum should be predictable from a measurement following a single low energy proton irradiation.

Walters, Robert J.↗

Lidar observations of ozone changes induced by subpolar air mass motion over Table Mountain, California (34.4 deg N)

Between October 15 and November 8, 1988, the Goddard Space Flight Center mobile stratospheric lidar was in place at the (JPL) Table Mountain Facility (located at 34.4 deg N, 117.7 deg W) for the purpose of intercomparing with the JPL lidar permanently stationed at the observatory. During the course of the intercomparison both lidar systems detected a significant change in the vertical profile of ozone lasting for several days. An analysis of meteorological data available from the National Meteorological Center has shown this change to be dynamical in origin due to the transport of subpolar air over Table Mountain.

Mcgee, Thomas J.↗

Theoretical characterization of the 5Pi and 3Pi potential energy surfaces for NH + O yields N + OH

The reactant, product, and saddle point regions of the 5Pi and 3Pi potential energy surfaces for the reaction NH + O yields N + OH have been characterized using complete active space self consistent field/externally contracted configuration interaction calculations with large atomic natural orbital basis sets. The computed barrier heights are 5.6 and 11.7 kcal/mol on the 5Pi and 3Pi surfaces, respectively. Transition state theory with an Eckart tunneling correction is used to estimate the rate constant on the 5Pi surface.

Walch, Stephen P.↗

Magnesium ion catalyzed P-N bond hydrolysis in imidazolide-activated nucleotides - Relevance to template-directed synthesis of polynucleotides

Results are presented from a detailed study of the P-N bond hydrolysis in guanosine 5-prime-monophosphate 2-methylimidazolide (2-MeImpG) and in guanosine 5-prime-imidazolide (ImpG) in the presence of 0-0.50 M Mg(2+). Pseudo-first-order rate constants of these compounds were obtained as a function of Mg(2+) concentration, for pH values between 6 and 10 and 37 C. It was found that Mg(2+) catalysis was most effective at pH 10, where a 15-fold increase in hydrolysis was achieved in 0.02 M Mg; at 0.2 M, a 115-fold increase was observed. Implication of these results for the mechanism of template-directed oligomerization is discussed.

Kanavarioti, Anastassia↗

N-body models

The experimental discovery of an overstability in the central regions of galaxies is briefly discussed, and numerical methods for integrating orbits are briefly addressed. The overstability manifests itself as a growing amplitude in the orbit of a galaxy's nucleus about its mass centroid. This finding may complicate studies of the topological properties of orbits and studies of the bifurcation structure of orbits. A sample problem is used to illustrate the importance of a Liouville theorem in N-body calculations.

Miller, R. H.↗

A nonrecursive 'Order N' preconditioned conjugate gradient/range space formulation of MDOF dynamics

This paper addresses the requirements of present-day mechanical system simulations of algorithms that induce parallelism on a fine scale and of transient simulation methods which must be automatically load balancing for a wide collection of system topologies and hardware configurations. To this end, a combination range space/preconditioned conjugage gradient formulation of multidegree-of-freedon dynamics is developed, which, by employing regular ordering of the system connectivity graph, makes it possible to derive an extremely efficient preconditioner from the range space metric (as opposed to the system coefficient matrix). Because of the effectiveness of the preconditioner, the method can achieve performance rates that depend linearly on the number of substructures. The method, termed 'Order N' does not require the assembly of system mass or stiffness matrices, and is therefore amenable to implementation on work stations. Using this method, a 13-substructure model of the Space Station was constructed.

Kurdila, A. J.↗