Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Matrix”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Measuring the Interfacial Chemistry of Micro- and Nano-Plastics Using Matrix Assisted Laser Desorption Ionization

Micro- and nano-plastics (MNPs) pose a significant hazard to both environmental and human health due to their complex interfacial interactions with their surroundings, however there is a lack of techniques available to study the composition of MNPs at their surface. To fill this gap, representative MNPs were coated with matrix that enabled detection via matrix-assisted laser desorption ionization mass spectrometry (MALDI), a technique that has been shown to be surface specific but had not been applied to MNPs previously. Three different coating techniques were tested; evaporation and condensation, drop-casting, and mixed nebulization. Mixed nebulization provided the best balance of results, which was a strong MALDI signal in combination with even coating on the MNP surface from MNPs ≥20 µm. This work provides a new technique for the measurement of MNP surface composition that will help advance the field and enable more thorough studies of the chemical transformations that MNPs undergo in the environment.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Scalable Fabrication of a Fibrous Amine-functionalized Matrix (FAM) Sorbent for Critical Mineral Recovery

We report a novel flat sheet Fibrous Amine-functionalized Matrix (FAM) sorbent platform designed for efficient and selective capture of CM from dilute solutions. The FAM sorbent features crosslinked amine microfilms coated onto/within a glass fiber matrix, providing fast mass transfer and excellent mechanical stability. Systematic batch and flow-through tests with FAM revealed rapid metal uptake kinetics and high capacity for representative species, achieving ~90 mg/g of Gallium, ~100 mg/g of Cobalt, and ~90 mg/g for Neodymium. Moreover, multiple eluents, including mineral acids and complexing agents, enabled highly effective desorption of adsorbed metals, demonstrating the feasibility of regenerating FAM sorbents. Importantly, tests with authentic coal ash leachate demonstrated strong selectivity toward U.S. Department of Energy (DOE)-listed CM and rare earth elements over abundant base cations, confirming the robustness of FAM in realistic complex solutions. The flat sheet geometry was amenable to scaling into durable spiral wound modules, highlighting the potential for future regeneration and reuse. This work establishes FAM sorbents as a promising platform for the recovery of CM from wastewaters, advancing both resource sustainability and environmental stewardship.

critical mineral recovery↗
DOE OSTI2025

Machine Learning–Guided Boolean Matrix Inference for Real-Time O-RAN Conflict Detection

Open Radio Access Networks (O-RAN) are emerging, software-driven cellular architectures that promote flexibility by enabling components from different vendors to interoperate. Multiple control applications called xApps can independently adjust network parameters in near real time, often without awareness of each other's actions. This creates a system highly prone to unintended conflicts and performance degradation due to the inherent complexity of such openness. To model such systems and ultimately prevent or mitigate xApp conflicts, it is essential to understand the dynamic relationships between xApps (A), the control parameters they adjust (P), and the resulting KPI responses (K). While the mappings from A to P and from K to A can often be derived from xApp specifications, the relationship from P to K is typically hidden within the system’s dynamics and must be inferred from observed data. We propose a novel data-driven Boolean inference framework that uncovers the hidden P?K dependencies using machine learning and interpretable rule induction. Continuous parameters and KPIs are first binarized using decision tree classifiers, and a binary influence matrix L is then inferred by solving Boolean matrix equations over time. This compact representation improves interpretability and enables real-time tracking of dynamically evolving parameter-KPI dependencies. We demonstrate the effectiveness of our method in a realistic mobile handover scenario, where it accurately recovers the underlying logic and enables proactive conflict detection.

42 - ENGINEERING↗
DOE OSTI2026

Irradiation of Advanced Cladding Specimens in the High Flux Isotope Reactor: Capsule Designs and Test Matrix

The Advanced Fuels Campaign (AFC) has initiated the Advanced Reactor Cladding (ARC) irradiation campaign to generate irradiation performance data for candidate fuel cladding concepts. The campaign includes a diverse set of ferritic/martensitic steels, oxide dispersion strengthened (ODS) alloys, FeCrAlbased alloys, coated materials, and welded cladding specimens produced through multiple US Department of Energy (DOE) programs and international collaborations. Three complementary experimental thrusts comprise the campaign: tensile testing (ARC Tensile) to rapidly screen candidate alloys, fracture toughness testing (ARC Fracture) to evaluate irradiation effects on crack resistance, and tubular weld testing (ARC Weld) to quantify irradiation-induced changes in the mechanical performance of end cap welds. This report documents the irradiation campaign design, including the selected materials, specimen types, irradiation matrix, and capsule designs for irradiation within the High Flux Isotope Reactor (HFIR). A total of 14 irradiation capsules were developed to achieve target irradiation temperatures between 300°C and 600°C and doses up to 30 dpa. Thermal analyses were performed using finite element methods to establish capsule geometries capable of achieving the desired specimen temperatures while accommodating differences in specimen geometry and material properties. The resulting capsule designs provide the basis for irradiation of the AFC-ARC experimental matrix and subsequent post-irradiation examination to assess the effects of neutron irradiation on advanced cladding materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Nuclear Matrix Elements for Neutrinoless Double-Beta Decay

Neutrinoless double-beta decay ($0\nu\beta\beta$) is a rare hypothesised process that, if discovered, would establish that the neutrino is Majorana, that is, it is its own antiparticle. Interpretation of experimental results relies on knowledge of nuclear matrix elements, whose large model uncertainty is the limiting factor in comparing measured (bounds on) half-lives to the neutrino mass. Nuclear effective field theory and lattice QCD have the potential to compute these matrix elements with better control over uncertainties, enhancing the discovery potential of next-generation $0\nu\beta\beta$ experiments. This work will survey various lattice QCD double-beta decay calculations and discuss their implications.

Grebe, Anthony V. [Fermilab] (ORCID:00000003103201↗
DOE OSTI2025

Optimizing Solar PV Deployment in Manufacturing: A Morphological Matrix and Fuzzy TOPSIS Approach

The growing energy demand of the industrial sector and the need for sustainable solutions highlight the importance of efficient decision making in solar photovoltaic (PV) implementation. Selecting optimal PV configuration is complex due to the interdependent technical, economic, environmental, and social factors involved. This study introduces an integrated decision-making method combining a morphological matrix and fuzzy TOPSIS to systematically select and rank optimal PV system configurations for manufacturing firms. While the morphological matrix exhaustively examines possible design solutions based on sensing, smart, sustainable, and social (S4) attributes, the fuzzy TOPSIS method ranks the alternatives by handling uncertainty in decision making. A case study conducted in a Mexican manufacturing company validates the methodology’s effectiveness. The optimal PV configuration identified comprehensively addresses operational and sustainability criteria, covering all lifecycle stages. This approach demonstrates quantitative superiority and greater robustness compared to existing fuzzy TOPSIS-based methods for solar PV applications. The findings highlight the practical value of data-driven, multi-criteria decision making for industrial solar energy adoption, enhancing project feasibility, cost efficiency, and environmental compliance. Future research will incorporate discrete event simulation (DES) to further refine energy consumption strategies in manufacturing.

Briceño, Citlaly Pérez↗
DOE OSTI2024

Improved Statistical Analysis for the Neutrinoless Double-Beta Decay Matrix Element of 136Xe

Neutrinoless double beta decay nuclear matrix element (M0ν) for 136Xe was recently analyzed using a statistical approach (Phys. Rev. C 107, 045501 (2023)). In the analysis, three initial shell model effective Hamiltonians were randomly altered, and their results for 23 measured observables were used to infer credibility for the M0ν nuclear matrix element (NME) based on a Bayesian Model Averaging approach. In that analysis, a reasonable Gamow-Teller quenching factor of 0.7 was assumed for each starting effective Hamiltonian. Given that the result of the statistical analysis was sensible to this choice, we are here improving that analysis by assuming that the Gamow-Teller quenching factor is also randomly chosen within reasonabe limits for all three starting Hamiltonians. The outcomes are slightly higher expectation values and uncertainties for the M0ν NME.

Astronomy & Astrophysics↗
DOE OSTI2021

Thermal History of Matrix Forsterite Grains from Murchison Based on High-resolution Tomography

Protoplanetary disks are dust- and gas-rich structures surrounding protostars. Depending on the distance from the protostar, this dust is thermally processed to different degrees and accreted to form bodies of varying chemical compositions. The primordial accretion processes occurring in the early protoplanetary disk such as chondrule formation and metal segregation are not well understood. One way to constrain them is to study the morphology and composition of forsteritic grains from the matrix of carbonaceous chondrites. Here, we present high-resolution ptychographic X-ray nanotomography and multimodal chemical microtomography (X-ray diffraction and X-ray fluorescence) to reveal the early history of forsteritic grains extracted from the matrix of the Murchison CM2.5 chondrite. Here,. the 3D electron density maps revealed, at unprecedented resolution (64 nm), spherical inclusions containing Fe–Ni, very little silica-rich glass and void caps (i.e., volumes where the electron density is consistent with conditions close to vacuum) trapped in forsterite. The presence of the voids along with the overall composition, petrological textures, and shrinkage calculations is consistent with the grains experiencing one or more heating events with peak temperatures close to the melting point of forsterite (~2100 K), and subsequently cooled and contracted, in agreement with chondrule-forming conditions.

58 GEOSCIENCES↗
DOE OSTI2021

Revisiting matrix-based inversion of scanning mobility particle sizer (SMPS) and humidified tandem differential mobility analyzer (HTDMA) data

Abstract. Tikhonov regularization is a tool for reducing noise amplification during data inversion. This work introduces RegularizationTools.jl, a general-purpose software package for applying Tikhonov regularization to data. The package implements well-established numerical algorithms and is suitable for systems of up to ∼ 1000 equations. Included is an abstraction to systematically categorize specific inversion configurations and their associated hyperparameters. A generic interface translates arbitrary linear forward models defined by a computer function into the corresponding design matrix. This obviates the need to explicitly write out and discretize the Fredholm integral equation, thus facilitating fast prototyping of new regularization schemes associated with measurement techniques. Example applications include the inversion involving data from scanning mobility particle sizers (SMPSs) and humidified tandem differential mobility analyzers (HTDMAs). Inversion of SMPS size distributions reported in this work builds upon the freely available software DifferentialMobilityAnalyzers.jl. The speed of inversion is improved by a factor of ∼ 200, now requiring between 2 and 5 ms per SMPS scan when using 120 size bins. Previously reported occasional failure to converge to a valid solution is reduced by switching from the L-curve method to generalized cross-validation as the metric to search for the optimal regularization parameter. Higher-order inversions resulting in smooth, denoised reconstructions of size distributions are now included in DifferentialMobilityAnalyzers.jl. This work also demonstrates that an SMPS-style matrix-based inversion can be applied to find the growth factor frequency distribution from raw HTDMA data while also accounting for multiply charged particles. The outcome of the aerosol-related inversion methods is showcased by inverting multi-week SMPS and HTDMA datasets from ground-based observations, including SMPS data obtained at Bodega Marine Laboratory during the CalWater 2/ACAPEX campaign and co-located SMPS and HTDMA data collected at the US Department of Energy observatory located at the Southern Great Plains site in Oklahoma, USA. Results show that the proposed approaches are suitable for unsupervised, nonparametric inversion of large-scale datasets as well as inversion in real time during data acquisition on low-cost reduced-instruction-set architectures used in single-board computers. The included software implementation of Tikhonov regularization is freely available, general, and domain-independent and thus can be applied to many other inverse problems arising in atmospheric measurement techniques and beyond.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Effects of Interactions Between Produced Formation Fluid and Rock Matrix on Pore Structure of Caney Shale, Southern Oklahoma

ABSTRACT: Rock-fluid interactions change properties of shales during exploitation. To investigate effects of rock-fluid interactions on pore structure of shales matrix after hydraulic fracturing, powder samples from two late Mississippian Caney Shale cores in the Ardmore Basin, southern Oklahoma, were used to react with formation produced fluid from the field in the batch reactor analysis. X-ray diffraction for mineralogy and Low-pressure nitrogen adsorption isotherms for pore structure were measured for original, after-7days, and after-30days samples. Results show that the samples consist mainly of quartz, followed by clay minerals, carbonates, and feldspar. The pore sizes of micropore (<2 nm) and mesopore (2-50 nm) increase 14%-233% due to dissolution of pyrite, feldspar, and carbonates after 7 days. Due to the transformation from smectite to illite and the increase of pore size, the specific surface area (SSA) decreases after 7-days interactions. After 30-days interactions, the micropore volume slightly increases and the mesopore and macropore volume decreases. Due to the decrease of pore size, the SSA of 30-days reacted samples increases correspondingly and is lower (for the clay-rich sample) or higher (for the calcareous sample) than that of the unreacted samples. Findings improve our understanding of dynamic alteration of shale properties during production. 1. INTRODUCTION Energy demand will continuously grow owing to the increasing global population as well as energy consumption (EIA, 2023). On the other hand, shale gas and oil reshaped the energy market in the United States, enabling the United States to become a net-export of natural gas country in 2017 (EIA, 2023). However, shale reservoirs are challenging tight formations that are still poorly understood in the extraction and production of hydrocarbons (Ross and Bustin, 2009; Curtis et al., 2012; Xiong et al., 2015, 2021a; Li Y. et al., 2016; Gong et al., 2019a; Benge et al., 2021; Awejori et al., 2022; Huang et al., 2022). One of the most challenging topics is the rock-fluid interactions post hydraulic fracturing and its subsequent impacts on the pore structures of fractured formation matrix.

Xiong, Fengyang↗
DOE OSTI2022

Epoxy as Filler or Matrix for Polymer Composites

Epoxy is a widely used polymer because of its ease of processing, high adhesiveness, and high chemical resistance. Epoxy-based composites are commonly used in aerospace, automotive, and marine applications. The epoxy type, function, curing agent, and curing process are discussed in this chapter. Epoxy is used as either a filler or polymer matrix in composite applications. As a filler, the epoxy modification on the fiber is discussed. As a polymer matrix, the epoxy is reinforced by natural and synthetic fibers. The manufacturing process and the fabricated epoxy-based composites’ performance (e.g., mechanical and thermal properties) are investigated. The advantages and disadvantages of epoxy’s function are discussed and summarized. Epoxy modification is an effective approach to improve the composites’ performance.

Zhao, Xianhui↗
NASA NTRS1969

Estimating reliability by application of matrix representation

Technique based upon matrix representation and matrix collapsing calculates the probability of successfully completing manned missions and of returning the spacecrew safely to earth. This technique provides analytic expressions for each subsystem, making it possible to relate changes in subsystem reliability directly to mission success and crew safety.

Austin, W. L.↗
NASA NTRS1969

Derivation of a matrix identity.

Matrix identity associated with linear digital filtering and recursive estimating determined using matrix projection operators and properties

Hemami, H.↗