Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MICROWAVES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

On-Chip Single-Layer Integration of Diamond Spins with Microwave and Plasmonic Channels

On-chip scalable integration represents a major challenge for practical quantum devices. One particular challenge is to implement on-chip optical readout of spins in diamond. This readout requires simultaneous application of optical and microwave fields along with the efficient collection of fluorescence. These requirements are typically met using bulk optical components and dedicated microwave lines. Here, we experimentally demonstrate an on-chip integrated interface for diamond nitrogen vacancy (NV) spin-state preparation and readout, implemented in a planar single layer with only one patterning step. A nanodiamond with NV centers is positioned inside a v-groove waveguide milled in a thick gold film. The gold film carries the microwave control signal, while the v-groove acts as a fluorescence collector and, potentially, as an integrated pump filter. Hence, the device dimensions and fabrication complexity are substantially reduced. Our approach fosters further development of ultracompact nanoscale quantum sensors and quantum information processing devices on a monolithic platform.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heterodyne detector for measuring the characteristic of elliptically polarized microwaves

In the present paper, a device is introduced, which is capable of determining the three characteristic parameters of elliptically polarized light (ellipticity, angle of ellipticity, and direction of rotation) for microwave radiation at a frequency of 110 GHz. The device consists of two perpendicular orientated pickup waveguides. A heterodyne technique mixes the microwave frequency down to frequencies on the order of 200 MHz. An oscilloscope is used to determine the relative amplitudes of the electrical fields and the phase shift in between, from which the three characteristic parameters can be calculated. Results from measured and calculated wave characteristics of an elliptically polarized 110 GHz microwave beam for plasma heating launched into the TEXTOR-tokamak experiment are presented. Measurement and calculation are in good agreement.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Characterization of Soils Using Microwave Radiation

The aim of this study is to characterize of soils using microwave radiation by the reflection techniques. The sample of soils was collected in Northern Peninsular of Malaysia. There are six types of soil have been indentified, which, sand, clay, loam, silty clay loam, silty loam and clay loam. We use the transmission of microwave using Gunn Diode Transmitter with frequency of 10.525 GHz and the pipette method. The result shows that, the soil type can be indentified using intensity values based on the percentages of the clay. The proposed technique also can be used to characterize soils using by microwave radiation.

58 GEOSCIENCES↗

Quantitative scanning near-field microwave microscopy for thin film dielectric constant measurement

We combine a scanning near-field microwave microscope with an atomic force microscope for use in localized thin film dielectric constant measurement, and demonstrate the capabilities of our system through simultaneous surface topography and microwave reflection measurements on a variety of thin films grown on low resistivity silicon substrates. Reflection measurements clearly discriminate the interface between {approx}38 nm silicon nitride and dioxide thin films at 1.788 GHz. Finite element simulation was used to extract the dielectric constants showing the dielectric sensitivity to be {delta}{epsilon}{sub r}=0.1 at {epsilon}{sub r}=6.2, for the case of silicon nitride. These results illustrate the capability of our instrument for quantitative dielectric constant measurement at microwave frequencies.

36 MATERIALS SCIENCE↗

Optical emission spectroscopy of atmospheric pressure microwave plasmas

The optical emission behaviors of Ar, He, and Ar+He plasmas generated in air using an atmospheric pressure microwave plasma source have been studied employing optical emission spectroscopy (OES). Emissions from various source gas species and air were observed. The variations in the intensities and intensity ratios of specific emissions as functions of the microwave power and gas flow rate were analyzed to investigate the relationship between the emission behavior and the plasma properties. We find that dependence of the emission behavior on the input microwave power is mainly determined by variations in electron density and electron temperature in the plasmas. On the other hand, under different gas flow rate conditions, changes in the density of the source gas atoms also significantly affect the emissions. Interestingly, when plasma is generated using an Ar+He mixture, emissions from excited He atoms disappear while a strong H{sub {alpha}} signal appears. The physics behind these behaviors is discussed in detail.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A PORTABLE MICROWAVE INTERFERENCE SCANNING SYSTEM FOR NONDESTRUCTIVE TESTING OF MULTI-LAYERED DIELECTRIC MATERIALS

A portable, microwave interference scanning system, that can be used in situ, with one-sided, non-contact access, has been developed. It has demonstrated capability of damage detection on composite ceramic armor. Specimens used for validation included specially fabricated surrogates, and non-ballistic impact-damaged specimens. Microwave data results were corroborated with high resolution direct-digital x-ray imaging. Microwave interference scanning detects cracks, laminar features and material properties variations. This paper will present details of the system and discuss results obtained.

36 MATERIALS SCIENCE↗

Measurements of plasma potential in high-pressure microwave plasmas

Plasma potential of a high-pressure ({approx}1 Torr) microwave-generated argon plasma is measured using a Langmuir probe and a cold emissive probe. The operation of a hot emissive probe in a high-pressure plasma has been very difficult due to frequent burn-outs and significantly reduced lifetime of the probe filament, which, in turn, limits the possibility of collecting a wide range of data. The I-V characteristics from both Langmuir and emissive probes are interpreted using the collisionless probe theory since the collision correction factor is not very significant. The plasma potential determined from both Langmuir and cold emissive probe characteristics agrees well with one another and is observed to be dependent on the operating gas pressure but relatively unchanged as a function of the microwave power. An average plasma potential determined over the operating range of microwave powers varies nonlinearly with the gas pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A method of particle transport study using supersonic molecular beam injection and microwave reflectometry on HL-2A tokamak

A method of the particle transport study using supersonic molecular beam injection (SMBI) and microwave reflectometry is reported in this paper. Experimental results confirm that pulsed SMBI is a good perturbation source with deeper penetration and better localization than the standard gas puffing. The local density modulation is induced using the pulsed SMBI and the perturbation density is measured by the microwave reflectometry. Using Fourier transform analysis for the local density perturbation, radial profiles of the amplitude and phase of the density modulation can be obtained. The experimental results in HL-2A show that the particle injected by SMBI is located at about r/a=0.65-0.75. The position of the main particle source can be determined through three aspects: the minimum of the phase of the first harmonic of the Fourier transform of the modulated density measured by microwave reflectometry; the H{sub a} intensity profile and the local density increase ratio. The maximum of the amplitude of the first harmonic shifts often inward relative to the particle source location, which indicates clearly there is an inward particle pinch in this area. Good agreement has been found between the experimental results and the simulation using analytical transport model. The particle diffusivity D and the particle convection velocity V have been obtained by doing this simulation. The sensitivity in the transport coefficients of the amplitude and the phase of the density modulation has been discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Production of electron cyclotron resonance plasma by using multifrequencies microwaves and active beam profile control on a large bore electron cyclotron resonance ion source with permanent magnets

A new concept on magnetic field with all magnets on plasma production and confinement has been proposed to enhance efficiency of an electron cyclotron resonance (ECR) plasma for broad and dense ion beam source under the low pressure. The magnetic field configuration is constructed by a pair of magnets assembly, i.e., comb-shaped magnet which cylindrically surrounds the plasma chamber. The resonance zones corresponding to the fundamental ECR for 2.45 GHz and 11-13 GHz frequencies are constructed at different positions. The profiles of the plasma parameters in the ECR ion source are different from each frequency of microwave. Large bore extractor is set at the opposite side against the microwave feeds. It is found that differences of their profiles also appear at those of ion beam profiles. We conducted to launch simultaneously multiplex frequencies microwaves controlled individually, and tried to control the profiles of the plasma parameters and then those of extracted ion beam.

43 PARTICLE ACCELERATORS↗

PROGRESS TOWARDS MICROWAVE IGNITION OF EXPLOSIVES

It is known that various materials are caused to spark when subjected to microwave radiation, and others can be heated to extremely high temperatures. This paper studies the behaviour of graphite under microwave radiation using a multi-mode 2.45 GHz+-50 Hz microwave cavity, and its potential applications in propellant ignition systems. Evidence for a correlation between sample mass and arcing intensity is presented, and a linear relationship between sample mass and temperature is found. Both graphite powder and flakes show increasing arcing intensity with increasing mass up to approx150 mg, after which the behaviour is more dispersed. The temperature achieved increases linearly with increasing mass, with maximum temperatures of 1,011 deg. C and 657 deg. C achieved for powder (<0.1 mm) and flakes respectively--well above thermal ignition temperatures for most common explosives.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement of plasma decay processes in mixture of sodium and argon by coherent microwave scattering

This paper presents the experimental measurement and computational model of sodium plasma decay processes in mixture of sodium and argon by using radar resonance-enhanced multiphoton ionization (REMPI), coherent microwave Rayleigh scattering of REMPI. A single laser beam resonantly ionizes the sodium atoms by means of 2+1 REMPI process. The laser beam can only generate the ionization of the sodium atoms and have negligible ionization of argon. Coherent microwave scattering in situ measures the total electron number in the laser-induced plasma. Since the sodium ions decay by recombination with electrons, microwave scattering directly measures the plasma decay processes of the sodium ions. A theoretical plasma dynamic model, including REMPI of the sodium and electron avalanche ionization (EAI) of sodium and argon in the gas mixture, has been developed. It confirms that the EAI of argon is several orders of magnitude lower than the REMPI of sodium. The theoretical prediction made for the plasma decay process of sodium plasma in the mixture matches the experimental measurement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Comment on 'Microwave attenuation of hydrogen plasma in carbon nanotubes' [J. Appl. Phys. 104, 124315 (2008)]

In a recent article, Babaei and Solari [J. Appl. Phys. 104, 124315 (2008)] studied the effects of the electron temperature, and the external static magnetic field on the attenuation (ATT) of the microwave in the hydrogen plasma embedded inside the carbon nanotubes (CNTs), which were grown by iron-catalyzed high-pressure disproportionation (HiPco). They showed that the position of ATT peak shifts significantly toward high frequency with increasing thermal frequency and in the presence of an external magnetic field in the Faraday configuration, for {upsilon}{sub c}<20 GHz, the ATT coefficient increases with increasing cyclotron frequency, and for {upsilon}{sub c}>20 GHz, the ATT level variations extremely increase, where {upsilon}{sub c} is the cyclotron frequency. Here we derive the correct form of the microwave absorption coefficient of the magnetized hydrogen plasma embedded inside the CNTs and show that the absorption band moves from low to high frequencies when the magnetic field strength increases. Also, we show that the ATT of the microwave in the system is not sensitive to the thermal frequency.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microwave induced zero-conductance state in a Corbino geometry two-dimensional electron gas with capacitive contacts

Microwave induced photoconductivity of a two-dimensional electron gas in selectively doped GaAs/AlAs heterostructures has been studied using the Corbino geometry with capacitive contacts at a temperature T=1.6 K and magnetic field B up to 0.5 T. Zero-conductance states have been observed in the samples under study subject to microwave radiation, similarly to the samples with Ohmic contacts. It has been shown that Ohmic contacts do not play a significant role for observation of zero-conductance states induced by microwave radiation.

36 MATERIALS SCIENCE↗

Simultaneous projection and detection system of four different frequencies for microwave imaging reflectometry in Large Helical Device

A simultaneous projection/detection system of four different frequencies for microwave imaging reflectometry (MIR) was developed for three-dimensional observation of electron density fluctuations in the Large Helical Device (LHD). The microwave with four frequency components at 60.410, 61.808, 63.008, and 64.610 GHz is projected in a continuous-wave mode to illuminate the target LHD plasma. A two-dimensional horn-antenna mixer array (2D HMA) receives the reflected wave from the plasma as well as the wave from the local oscillator operating at 55.800 GHz. The first intermediate frequency (IF) signals at 4.610, 6.008, 7.208, and 8.810 GHz were confirmed to be obtained by downconversion of these microwaves using the 2D HMA. Each of these first IF components is filtered from each other and downconverted again for the superheterodyne detection. It was confirmed that both the amplitudes and the phases of the detected signals reflect the fluctuations in LHD plasmas.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Consideration of the mechanism of microwave emission due to material destruction

Microwave emission due to material destruction by hypervelocity impact with several kilometers per second was found at 2 and 22 GHz, and its power was calibrated in the laboratory for the first time ever. In this paper, we first summarize the experimental results in relation to the mechanism of microwave emission. We then propose three kinds of hypotheses on the mechanism, which are based on the dynamic relative motion of an atom’s nucleus and the outermost electron and lead to dipole radiation. The deduced equation represents the power dependence on the target’s thickness, which agrees well with the experimental result. The models were then numerically analyzed in consideration of the experimental data. In the most promising model, a projectile molecule flicks the nucleus out and the outermost electron is left out of the orbit of the atom. Accordingly, the material is polarized or ionized to form an impulsive dipole, which leads to microwave emission. This model is compatible with material ionization by mechanical excitation, such as rubbing and peeling, or triboelectricity. The calculated energy shows good agreement with the experimental value. On the other hand, if the outermost electron remains within the gravity field of the nucleus, the calculated and experimental results do not agree with each other.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation of the delay time distribution of high power microwave surface flashover

Characterizing and modeling the statistics associated with the initiation of gas breakdown has proven to be difficult due to a variety of rather unexplored phenomena involved. Experimental conditions for high power microwave window breakdown for pressures on the order of 100 to several 100 torr are complex: there are little to no naturally occurring free electrons in the breakdown region. The initial electron generation rate, from an external source, for example, is time dependent and so is the charge carrier amplification in the increasing radio frequency (RF) field amplitude with a rise time of 50 ns, which can be on the same order as the breakdown delay time. The probability of reaching a critical electron density within a given time period is composed of the statistical waiting time for the appearance of initiating electrons in the high-field region and the build-up of an avalanche with an inherent statistical distribution of the electron number. High power microwave breakdown and its delay time is of critical importance, since it limits the transmission through necessary windows, especially for high power, high altitude, low pressure applications. The delay time distribution of pulsed high power microwave surface flashover has been examined for nitrogen and argon as test gases for pressures ranging from 60 to 400 torr, with and without external UV illumination. A model has been developed for predicting the discharge delay time for these conditions. The results provide indications that field induced electron generation, other than standard field emission, plays a dominant role, which might be valid for other gas discharge types as well.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microwave Annealing of Ion Implanted 4H-SiC

Ultra-fast high-temperature microwave annealing at temperatures as high as 2050 deg. C for 30 s has been performed on phosphorus ion-implanted 4H-SiC for phosphorus doping concentrations in the range 5x10{sup 19} cm{sup -3}-8x10{sup 20} cm{sup -3}. For comparison, inductive heating furnace anneals were performed at 1800 deg. C-1950 deg. C for 5 min. Electrical resistivity of the P{sup +}-implanted samples decreased with increasing annealing temperature reaching a minimum value of 6.8x10{sup -4} {Omega}cm for 2050 deg. C/30 s microwave annealing and a slightly higher value for 1950 deg. C/5 min inductive heating furnace annealing. X-ray rocking curve measurements showed that the microwave annealing not only removed the lattice damage introduced by the ion-implantation process, but also the defects present in the original virgin sample as well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microwave assisted magnetization switching in Co/Pt multilayer

In this study, we have experimentally investigated the microwave assisted magnetization by switching (MAS) on the microstructured Co/Pt multilayer. The sample exhibits the typical magnetization curve peculiar to perpendicular anisotropy films, that is, a steep reversal initiated by nucleation of a reversed domain followed by its subsequent gradual expansion by the domain wall displacement. By applying microwaves with the frequency of GHz order, the nucleation field H{sub n} is significantly reduced at three frequencies. Taking into account the effective anisotropy field of our sample, the first dip of H{sub n} at the lowest frequency probably corresponds to the Kittel mode excitation, and the other two dips at higher frequencies correspond to unidentified excitation modes other than the Kittel mode. Among them, the last dip of H{sub n} at the highest frequency reaches about 1/3 of that without microwave application. These results suggest the existence of more effective excitation modes for MAS than the Kittel mode.

36 MATERIALS SCIENCE↗