Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

First principles study of the magnetic properties of LaOMnAs

Recent experiments reported giant magnetoresistance at room temperature in LaOMnAs. Here, a density functional theory calculation is performed to investigate magnetic properties of LaOMnAs. The ground state is found to be the G-type antiferromagnetic order within the ab plane but coupled ferromagnetically between planes, in agreement with recent neutron investigations. The electronic band structures suggest an insulating state which is driven by the particular G-type magnetic order, while a metallic state accompanies the ferromagnetic order. This relation between magnetism and conductance may be helpful to qualitatively understand the giant magnetoresistance effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic properties of Co-Zr-B magnets produced by spark plasma sintering method

Magnets of Co-Zr-B, one of the permanent magnetic compounds without rare-earth elements, were successfully produced by the spark plasma sintering method. The resultant Co-Zr-B magnets had high densities of 92%–96% and consisted mainly of the Co{sub x}Zr (x ≈ 5) phase. The coercivity of the Co-Zr-B magnets was highly dependent on the consolidation temperature and the boron content. The highest maximum energy product of 6.0 MGOe, with a remanence of 6.4 kG and the coercivity of 4.0 kOe, was achieved by the Co{sub 80}Zr{sub 18}B{sub 2} magnets consolidated at 873 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic properties of La{sub 1−x}Sr{sub x}MnO{sub 3} nanoparticles prepared in a molten salt

Single phase La{sub 1−x}Sr{sub x}MnO{sub 3} nanoparticles (x = 0.18 − 0.37) are prepared by a novel way in molten NaNO{sub 2} at 500 °C. Their rhombohedral perovskite structure is confirmed by XRD patterns and exact chemical composition is determined by XRF (X-ray fluorescence) spectroscopy. The mean size of the as-prepared crystallites is of about 50 nm, the grains are rather separated and do not form sintering bridges that were typical for products synthesized by sol-gel routes followed by annealing. On the other hand, the synthesized nanoparticles exhibit rather low magnetization and decreased Curie temperature. Their neutron diffraction study indicates a complex magnetic ordering together with anomalously high atomic displacements factors that decreased considerably after annealing the samples at elevated temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure evolution of hot-deformed Nd-Fe-B anisotropic magnets

The microstructural evolution of hot-deformed Nd-Fe-B magnets in each stage of hot-deformation process was studied using transmission electron microscopy and three dimensional atom probe (3DAP). The anisotropic growth of initially isotropic grains in rapidly solidified alloy occurs by annealing without pressing. 3DAP analyses showed a higher concentration of rare-earth elements in the intergranular phase parallel to the flat surface of platelet shaped Nd{sub 2}Fe{sub 14}B grains compared to that in the intergranular phase at the side of platelets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coercivity enhancement of sintered Nd-Fe-B magnets by chemical bath deposition of TbCl{sub 3}

The chemical bath deposition (CBD) and the grain boundary diffusion method were combined to diffuse the heavy rare earth for obtain the thick magnets with high coercivity and low heavy rare earth. The jet mill powders were soaked into the alcohol solution of 0.2 wt. % TbCl{sub 3}. A thin layer of TbCl{sub 3} was wrapped to the surface of (PrNd){sub 2}Fe{sub 14}B powder particles. The coercivity of magnet is increased from 11.89 kOe to 14.72 kOe without significant reduction of remanence after grain boundary diffusion in the sintering and the annealing processes. The temperature coefficients of the remanence and the coercivity are improved by the substitution of PrNd by Tb in the surface of grains. The highly accelerated temperature/humidity stress test (HAST) results indicate that the CBD magnet has poor corrosion resistance, attributing to the present of Cl atoms in the grain boundaries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase structure and magnetic properties of Mn{sub 3}Ga{sub 2} alloy

In this paper, Mn{sub 3}Ga{sub 2} alloys with high saturation magnetization and high Curie temperatures were prepared by levitation melting high pure Mn and Ga elements followed by annealing. The effect of annealing temperature on phase structure and magnetic properties was investigated by means of x-ray diffraction and a vibrating sample magnetometer. A single phase alloy Mn{sub 3}Ga{sub 2}, which has tetragonal P4/mmm structure, was obtained with an annealing temperature of 773 K and annealing time of 24 h. The hysteresis curve of its easy axis for this single phase alloy shows that the room temperature coercivity and saturation magnetization are 4.18 kOe and 50.81 emu/g, respectively. The thermomagnetic curves indicate that the Curie temperature is about 650 K and a phase transformation occurs above 823 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic properties and scale-up of nanostructured cobalt carbide permanent magnetic powders

Co{sub x}C magnetic nanoparticles were successfully synthesized via a modified polyol process without using a rare-earth catalyst during the synthesis process. The present results show admixtures of Co{sub 2}C and Co{sub 3}C phases possessing magnetization values exceeding 45 emu/g and coercivity values exceeding 2.3 kOe at room temperature. Moreover, these experiments have illuminated the important role of surfactants, reaction temperature, and reaction duration on the crystallographic structure and magnetic properties of Co{sub x}C, while tetraethylene glycol was employed as a reducing agent. The role of the ratios of Co{sub 2}C and Co{sub 3}C phases in the admixture magnetic properties is discussed. The crystallographic structure and particle size of the Co{sub x}C nanoparticles were characterized by X-ray diffractometry and scanning electron microscopy. Vibrating sample magnetometry was used to determine magnetic properties. Scale-up of synthesis to more than 5 g per batch was demonstrated with no significant degradation of magnetic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

9 T high magnetic field annealing effects on FeN bulk sample

α″-Fe{sub 16}N{sub 2} has been suggested as a promising candidate for future rare-earth-free magnets. In this paper, we report to use high magnetic field (9 T) assisted post-annealing process to enhance the Fe{sub 16}N{sub 2} phase formation in FeN bulk rod samples during the α′ → α″ phase transformation and thus improve its magnetic properties. It was found by X-ray Diffraction measurement that the volume ratio of Fe{sub 16}N{sub 2} phase was increased up to 22%, which corresponds to an increase in the amount of transformation from α′ → α″ up to 78%. Also, the saturation magnetization (M{sub s}) of the prepared FeN rod sample was increased to 227 emu/g with its coercivity up to 376 Oe at room temperature. A working mechanism for the high field assisted post-annealing process was presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observations of thermally excited ferromagnetic resonance on spin torque oscillators having a perpendicularly magnetized free layer

Measurements of thermally excited ferromagnetic resonance were performed on spin torque oscillators having a perpendicularly magnetized free layer and in-plane magnetized reference layer (abbreviated as PMF-STO in the following) for the purpose of obtaining magnetic properties in the PMF-STO structure. The measured spectra clearly showed a large main peak and multiple smaller peaks on the high frequency side. A Lorentzian fit on the main peak yielded Gilbert damping factor of 0.0041. The observed peaks moved in proportion to the out-of-plane bias field. From the slope of the main peak frequency as a function of the bias field, Lande g factor was estimated to be about 2.13. The mode intervals showed a clear dependence on the diameter of the PMF-STOs, i.e., intervals are larger for a smaller diameter. These results suggest that the observed peaks should correspond to eigenmodes of lateral spin wave resonance in the perpendicularly magnetized free layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin-wave based realization of optical computing primitives

We use micromagnetic simulations to demonstrate that spin waves can perform optically inspired, non-Boolean computing algorithms. We propose and design coherent spin-wave sources and phase shifters, which act akin to the key components of an optical signal processing system. We show that the functionality of the proposed on-chip spin-wave based signal processing system is similar to known optical computing devices. We argue that such computing system can serve as a practical, energy efficient, and integrated component of nanoscale image processing systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interfacial stress balances in structured continua and free surface flows in ferrofluids

Interfacial linear and internal angular momentum balances are obtained for a structured continuum and for the special case of a ferrofluid, a suspension of magnetic nanoparticles in a Newtonian fluid. The interfacial balance equations account for the effects of surface tension and surface tension gradient, magnetic surface excess forces, antisymmetric stresses, and couple stresses in driving interfacial flows in ferrofluids. Application of the interfacial balance equations is illustrated by obtaining analytical expressions for the translational and spin velocity profiles in a thin film of ferrofluid on an infinite flat plate when a rotating magnetic field is applied with axis of rotation parallel to the ferrofluid/air interface. The cases of zero and non-zero spin viscosity are considered for small applied magnetic field amplitude. Expressions for the maximum translational velocity, slope of the translational velocity profile at the ferrofluid/air interface, and volumetric flow rate are obtained and their use to test the relevance of spin viscosity and couple stresses in the flow situation under consideration is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solitary waves in a chain of repelling magnets

We study experimentally, numerically, and theoretically the dynamics of a one dimensional array of repelling magnets. We demonstrate that such systems support solitary waves with a profile and propagation speed that depend on the amplitude. The system belongs to the kind of nonlinear lattices studied in [Friesecke and Matthies, Physica D 171, 211–220 (2002)] and exhibits a sech{sup 2} profile in the low energy regime and atomic scale localization in the high energy regime. Such systems may find potential applications in the design of novel devices for shock absorption, energy localization and focusing. Furthermore, due to the similarity of the magnetic potential with the potentials governing atomic forces, the system could be used for a better understanding of important problems in physics and chemistry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reconfigurable and non-volatile vertical magnetic logic gates

In this paper, we discuss the concept and prototype fabrication of reconfigurable and non-volatile vertical magnetic logic gates. These gates consist of two input layers and a RESET layer. The RESET layer allows the structure to be used as either an AND or an OR gate, depending on its magnetization state. To prove this concept, the gates were fabricated using a multi-layered patterned magnetic media, in which three magnetic layers are stacked and exchange-decoupled via non-magnetic interlayers. We demonstrate the functionality of these logic gates by conducting atomic force microscopy and magnetic force microscopy (MFM) analysis of the multi-layered patterned magnetic media. The logic gates operation mechanism and fabrication feasibility are both validated by the MFM imaging results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Slew-rate dependence of tracer magnetization response in magnetic particle imaging

Magnetic Particle Imaging (MPI) is a new biomedical imaging technique that produces real-time, high-resolution tomographic images of superparamagnetic iron oxide nanoparticle tracers. Currently, 25 kHz and 20 mT/μ{sub 0} excitation fields are common in MPI, but lower field amplitudes may be necessary for patient safety in future designs. Here, we address fundamental questions about MPI tracer magnetization dynamics and predict tracer performance in future scanners that employ new combinations of excitation field amplitude (H{sub o}) and frequency (ω). Using an optimized, monodisperse MPI tracer, we studied how several combinations of drive field frequencies and amplitudes affect the tracer's response, using Magnetic Particle Spectrometry and AC hysteresis, for drive field conditions at 15.5, 26, and 40.2 kHz, with field amplitudes ranging from 7 to 52 mT/μ{sub 0}. For both fluid and immobilized nanoparticle samples, we determined that magnetic response was dominated by Néel reversal. Furthermore, we observed that the peak slew-rate (ωH{sub o}) determined the tracer magnetic response. Smaller amplitudes provided correspondingly smaller field of view, sometimes resulting in excitation of minor hysteresis loops. Changing the drive field conditions but keeping the peak slew-rate constant kept the tracer response almost the same. Higher peak slew-rates led to reduced maximum signal intensity and greater coercivity in the tracer response. Our experimental results were in reasonable agreement with Stoner-Wohlfarth model based theories.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Noise-induced bifurcations in magnetization dynamics of uniaxial nanomagnets

Stochastic magnetization dynamics in uniformly magnetized nanomagnets is considered. The system is assumed to have rotational symmetry as the anisotropy axis, the applied field, and the spin polarization are all aligned along an axis of symmetry. By appropriate integration of the Fokker-Planck equation associated to the problem, the stochastic differential equation governing the evolution of the angle between the magnetization orientation and the symmetry axis is derived. The drift terms present in this equation contain a noise-induced drift term, which, in combination with drift terms of deterministic origin, can be written as the derivative of an effective potential. Superparamagnetic-like transitions are studied in connections with the bifurcations of the effective potential as temperature and excitation conditions are varied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomic packing and diffusion in Fe{sub 85}Si{sub 2}B{sub 9}P{sub 4} amorphous alloy analyzed by ab initio molecular dynamics simulation

In the work reported in this paper, ab initio molecular dynamics simulation was performed on Fe{sub 85}Si{sub 2}B{sub 9}P{sub 4} amorphous alloy. Preferred atomic environment of the elements was analyzed with Voronoi polyhedrons. It showed that B and P atoms prefer less neighbors compared with Fe and Si, making them structurally incompatible with Fe rich structure and repulsive to the formation of α-Fe. However, due to the low bonding energy of B and P caused by low coordination number, the diffusion rates of them were considerably large, resulting in the requirement of fast annealing for achieving optimum nano-crystallization for its soft magnetic property. The simulation work also indicates that diffusion rate in amorphous alloy is largely determined by bonding energy rather than atomic size.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Micromagnetic study of spin transfer switching with a spin polarization tilted out of the free layer plane

We present the results of zero temperature macrospin and micromagnetic simulations of spin transfer switching of thin film nanomagnets in the shape of an ellipse with a spin-polarization tilted out of the layer plane. The perpendicular component of the spin-polarization is shown to increase the reversal speed, leading to a lower current for switching in a given time. However, for tilt angles larger than a critical angle, the layer magnetization starts to precess about an out-of-plane axis, which leads to a final magnetization state that is very sensitive to simulation conditions. As the ellipse lateral size increases, this out-of-plane precession is suppressed, due to the excitation of spatially non-uniform magnetization modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Micromagnetic model analysis of integrated single-pole-type head with tilted spin-torque oscillator for high-frequency microwave-assisted magnetic recording

The spin-torque oscillator (STO) is the most important component in microwave-assisted magnetic recording. Some requirements for the STO are: large amplitude and stable oscillation, small injected current, and oscillation at a frequency that excites resonance in a recording medium. It is also necessary for the STO oscillation to closely follow the head coil current. In this paper, STOs were integrated into write heads and micromagnetic analyses carried out to obtain a write head structure with stable STO oscillation that could follow a high-frequency head coil current.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗