Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Low Temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Low temperature phase transition and crystal structure of CsMgPO{sub 4}

CsMgPO{sub 4} doped with radioisotopes is a promising compound for usage as a radioactive medical source. However, a low temperature phase transition at temperatures close to ambient conditions (∼−40 °C) was observed. Information about such kind of structural changes is important in order to understand whether it can cause any problem for medical use of this compound. The phase transition has been investigated in detail using synchrotron powder diffraction, Raman spectroscopy and DFT calculations. The structure undergoes a transformation from an orthorhombic modification, space group Pnma (RT phase) to a monoclinic polymorph, space group P2{sub 1}/n (LT phase). New LT modification adopts similar to RT but slightly distorted unit cell: a=9.58199(2) Å, b=8.95501(1) Å, c=5.50344(2) Å, β=90.68583(1)°, V=472.198(3) Å{sup 3}. CsMgPO{sub 4} belongs to the group of framework compounds and is made up of strictly alternating MgO{sub 4}- and PO{sub 4}-tetrahedra sharing vertices. The cesium counter cations are located in the resulting channel-like cavities. Upon the transformation a combined tilting of the tetrahedra is observed. A comparison with other phase transitions in ABW-type framework compounds is given. - Graphical abstract: Structural behavior of β-tridymite-type phosphate CsMgPO{sub 4}, considered as potential chemical form for radioactive Cs-source has been studied at near ambient temperatures. A phase transition at (∼−40 °C) has been found and investigated. It has been established that the known orthorhombic RT modification, space group Pnma, adopts a monoclinic cell with space group P2{sub 1}/n at low temperatures. In this paper, we present results of structural analysis of changes accompanying this phase transition and discuss its possible impact on the application properties. - Highlights: • β-Tridymite type phosphate CsMgPO{sub 4} undergoes so called translationengleiche phase transition of index 2 at −40 °C. • The structure transforms from an orthorhombic (space group Pnma) to a monoclinic (space group P2{sub 1}/n) phase. • In comparison with the RT form, the LT modification adopts a similar but slightly distorted unit cell.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic and low temperature phonon studies of CoCr{sub 2}O{sub 4} powders doped with Fe(III) and Ni(II) ions

Extensive temperature-dependent phonon studies and low-temperature magnetic measurements of CoCr{sub 2−x}Fe{sub x}O{sub 4} (for x=0.5, 1 and 2) and Co{sub 0.9}Ni{sub 0.1}Cr{sub 2}O{sub 4} polycrystalline powders are presented. The main aim of these studies was to obtain information on phonon and structural properties of these compounds as well as strength of spin–phonon coupling in the magnetically ordered phases. IR and Raman spectra show that doping of CoCr{sub 2}O{sub 4} with Fe(III) ions leads to broadening of bands and appearance of new bands due to the formation of inverted spinel structure. In contrast to this behavior, doping with 10 mol% of Ni(II) ions leads to weak increase of band width only. Magnetization measured as a function of temperature and external magnetic field showed that magnetic properties of Co{sub 0.9}Ni{sub 0.1}Cr{sub 2}O{sub 4} sample are similar to those reported for pure CoCr{sub 2}O{sub 4}, i.e., partial substitution of Ni(II) for Co(II) leads to slight shift of the ferrimagnetic phase transition at T{sub C} and spiral spin order transition at T{sub S} towards lower values. The change of crystallization preference induced by incorporation of increasing concentration of Fe(III) ions in the spinel lattice causes significant increase of T{sub C} and decrease of T{sub S}. The latter transition disappears completely for higher concentrations of Fe(III). The performed temperature-dependent IR studies revealed interesting anomalous behavior of phonons below T{sub C} for CoCr{sub 1.5}Fe{sub 0.5}O{sub 4} and Co{sub 0.9}Ni{sub 0.1}Cr{sub 2}O{sub 4}, which was attributed to spin–phonon coupling. - Graphical abstract: Visualization of normal spinel-type AB{sub 2}O{sub 4} structure, where blue octahedrons denote BO{sub 6} and red tetrahedrons AO{sub 4} units as well as IR and Raman spectra of Co{sub 0.9}Ni{sub 0.1}Cr{sub 2}O{sub 4} powder. - Highlights: • T{sub C} (T{sub S}) increases (decreases) with increasing Fe(III) concentration. • Ni(II) ions doping up to 10 mol% does not change remarkably T{sub C} and T{sub S}. • Doping with Fe(III) ions causes increase of spinel inversion parameter. • Spin–phonon interactions in Co{sub 0.9}Ni{sub 0.1}Cr{sub 2}O{sub 4} and CoCr{sub 1.5}Fe{sub 0.5}O{sub 4} were evidenced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diffusion Dynamics of Water Molecules in a LiCl Solution: a Low-Temperature Crossover

A quasielastic neutron scattering experiment probing the dynamics of water molecules on the pico- to nanosecond time scale in an aqueous solution of lithium chloride has detected a crossover at about 220-230 K between the high-temperature non-Arrhenius and low-temperature Arrhenius behavior. This is the first experiment where the crossover in the dynamics of water molecules is detected in bulk rather than in confinement. The results suggest that the dynamic crossover observed in the current and many recent experiments is not linked to the specific properties of water; instead, it may represent a more general dynamic transition.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High-temperature Superconducting Interconnects for Ultra-low Temperature, High-field Environments

Coplanar (with the ground) 20 cm long waveguides are manufactured from the YBCO-on-Kapton material. We investigate the effect of parasitic ground plane resonances on the performance of these waveguides. Here, it is concluded that dense rows stitching vias are essential for isolating the lines to a level below 60 dB at 6 GHz. We demonstrate a metalized via technology that is compatible with both the traditional Flexible Printed Circuit (FPC) process and the epitaxial YBCO material. Stitching via fence with the via period 10 mm is shown as effective in suppressing parasitic resonances at 77 K.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Magnetic ordering in terbium at high pressures and low temperatures

We have investigated magnetic ordering in the heavy lanthanide terbium (Tb) for pressures up to 70 GPa and temperatures down to 20 K by synchrotron x-ray diffraction at the Advanced Photon Source, Argonne National Laboratory. The x-ray diffraction studies were complemented by neutron diffraction studies at the Spallation Neutron Source, Oak Ridge National Laboratory. We focused on the higher-pressure phases of Tb, such as the double hexagonal close-packed (dhcp, above 16 GPa), distorted face-centered cubic (hR24, above 30 GPa), and orthorhombic (oF16, above 51 GPa) phases. We observed the phenomenon of spontaneous magnetostriction in the dhcp and hR24 phases, where magnetic ordering at low temperatures gives rise to subtle splitting in x-ray diffraction peaks. The neutron diffraction study of the dhcp phase at 20 GPa revealed magnetic peaks that can be assigned a propagation vector k = ($\frac{1}{2}$, 0, $\frac{1}{2}$), and a magnetic ordering temperature that is consistent with the magnetostriction effect observed with x-ray diffraction. The high-pressure and low-temperature x-ray diffraction study at 70 GPa in the collapsed oF16 phase did not show any evidence of magnetostriction, indicating a significant decrease in the magnetic moment of the 4f-shell due to band broadening at ultra-high compression.

36 MATERIALS SCIENCE↗

Low temperature perovskite solar cells with an evaporated TiO 2 compact layer for perovskite silicon tandem solar cells

Silicon-based tandem solar cells can overcome the efficiency limit of single junction silicon solar cells. Perovskite solar cells are particularly promising as a top cell in monolithic tandem devices due to their rapid development towards high efficiencies, a tunable band gap with a sharp optical absorption edge and a simple production process. In monolithic tandem devices, the perovskite solar cell is deposited directly on the silicon cell, requiring low-temperature processes (< 200 °C) to maintain functionality of under-lying layers of the silicon cell in case of highly efficient silicon hetero-junction (SHJ) bottom solar cell. In this work, we present a complete low-temperature process for perovskite solar cells including a mesoporous titanium oxide (TiO 2 ) scaffold - a structure yielding the highest efficiencies for single-junction perovskite solar cells. We show that evaporation of the compact TiO 2 hole blocking layer and ultra-violet (UV) curing for the mesoporous TiO 2 layer allows for good performance, comparable to high-temperature (> 500 °C) processes. With both manufacturing routes, we obtain short-circuit current densities (J SC ) of about 20 mA/cm 2 , open-circuit voltages (V OC ) over 1 V, fill factors (FF) between 0.7 and 0.8 and efficiencies (n) of more than 15%. We further show that the evaporated TiO 2 layer is suitable for the application in tandem devices. The series resistance of the layer itself and the contact resistance to an indium doped tin oxide (ITO) interconnection layer between the two sub-cells are low. Additionally, the low parasitic absorption for wavelengths above the perovskite band gap allow a higher absorption in the silicon bottom solar cell, which is essential to achieve high tandem efficiencies.

14 SOLAR ENERGY↗

Low Temperature Studies on DC745U Pressure Pads

DC745U is a silica-filled solid silicone elastomer used to manufacture pressure pads for a variety of applications. The material is proprietary to Dow Corning and thus very little information on its composition and properties is available. A considerable amount of characterization work has been conducted (Denisse Ortiz-Acosta W-1-TR-0098U/ LA-UR-12-23612) on DC745U. Based on these studies an estimate of the composition of the polymer was obtained. DC745U is composed of ≤ 100 wt% dimethyl siloxane repeat units, ≤1.5 wt% of methylphenyl siloxane, and ≤ 1 wt% methylvinyl siloxane groups. The methylvinyl siloxane groups are used as crosslink sites. The polymer is cured using a vinyl-specific peroxide, Varox DBPH-50, at 160ºC to form a polymer network. The structure and composition of this polymer network provide DC745U its unique properties. The methylphenyl siloxane repeat unit was added to improve DC745U’s thermal properties when compared to polydimethylsiloxane (PDMS). PDMS has a glass transition temperature of -120ºC and a melting temperature of -40ºC. It is believed that the phenyl group in DC745U improves thermal properties by inhibiting crystallization. This report describes the results obtained from low temperature thermal, mechanical and molecular characterization. These studies were conducted to improve our understanding of low temperature crystallization kinetics and thermal kinetics under compression strain and to determine if the pad undergoes stress deformations under these extreme conditions. Results described herein address several knowledge gaps previously stated in the report W-1-TR-0098U. Experiments described here include Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA), Nuclear Magnetic Resonance (NMR), and mechanical (stress/strain) tests.

36 MATERIALS SCIENCE↗

Structural and optical properties of Ag-doped copper oxide thin films on polyethylene napthalate substrate prepared by low temperature microwave annealing

Silver doped cupric oxide thin films are prepared on polyethylene naphthalate (flexible polymer) substrates. Thin films Ag-doped CuO are deposited on the substrate by co-sputtering followed by microwave assisted oxidation of the metal films. The low temperature tolerance of the polymer substrates led to the search for innovative low temperature processing techniques. Cupric oxide is a p-type semiconductor with an indirect band gap and is used as selective absorption layer solar cells. X-ray diffraction identifies the CuO phases. Rutherford backscattering spectrometry measurements confirm the stoichiometry of each copper oxide formed. The surface morphology is determined by atomic force microscopy. The microstructural properties such as crystallite size and the microstrain for (-111) and (111) planes are calculated and discussed. Incorporation of Ag led to the lowering of band gap in CuO. Consequently, it is determined that Ag addition has a strong effect on the structural, morphological, surface, and optical properties of CuO grown on flexible substrates by microwave annealing. Tauc's plot is used to determine the optical band gap of CuO and Ag doped CuO films. The values of the indirect and direct band gap for CuO are found to be 2.02 eV and 3.19 eV, respectively.

36 MATERIALS SCIENCE↗

Low-temperature nanoscale heat transport in a gadolinium iron garnet heterostructure probed by ultrafast x-ray diffraction

Time-resolved x-ray diffraction has been used to measure the low-temperature thermal transport properties of a Pt/Gd3Fe5O12//Gd3Ga5O12 metal/oxide heterostructure relevant to applications in spin caloritronics. A pulsed femtosecond optical signal produces a rapid temperature rise in the Pt layer, followed by heat transport into the Gd3Fe5O12 (GdIG) thin film and the Gd3Ga5O12 (GGG) substrate. The time dependence of x-ray diffraction from the GdIG layer was tracked using an accelerator-based femtosecond x-ray source. The ultrafast diffraction measurements probed the intensity of the GdIG (1 −1 2) x-ray reflection in a grazing-incidence x-ray diffraction geometry. The comparison of the variation of the diffracted x-ray intensity with a model including heat transport and the temperature dependence of the GdIG lattice parameter allows the thermal conductance of the Pt/GdIG and GdIG//GGG interfaces to be determined. Complementary synchrotron x-ray diffraction studies of the low-temperature thermal expansion properties of the GdIG layer provide a precise calibration of the temperature dependence of the GdIG lattice parameter. The interfacial thermal conductance of the Pt/GdIG and GdIG//GGG interfaces determined from the time-resolved diffraction study is of the same order of magnitude as previous reports for metal/oxide and epitaxial dielectric interfaces. The thermal parameters of the Pt/GdIG//GGG heterostructure will aid in the design and implementation of thermal transport devices and nanostructures.

36 MATERIALS SCIENCE↗

Low Temperature CO 2 Hydrogenation on Unsupported Mo 2 C Catalysts

CO 2 hydrogenation to methanol, a key reaction for decarbonizing the fuel and chemical industries, requires catalyst formulations that hydrogenate CO 2 selectively to methanol at temperatures where methanol conversion is not significantly equilibrium limited (<423 K). Herein we report continuous CO 2 hydrogenation at low temperatures (348-408 K, H 2 /CO 2 = 0.1-50, 5-35 bar) with high selectivity to methanol (up to ca. 80%) over unsupported β-Mo 2 C catalysts. Active site density quantification via titration with trifluoroacetic acid at reaction temperatures enables an assessment of site-specific rates. Methanation and reverse water gas shift (RWGS) occur concurrently with methanol synthesis during CO 2 hydrogenation over Mo 2 C. Reaction pathway analysis, product cofeeds, and reversibility formalisms show that all products form through primary reaction pathways from CO 2 , but secondary reactions of CO contribute significantly to rates of methanation. Dependences of forward rates on reactant and product concentration determined by independently varying the CO 2 , H 2 , CO, H 2 O, CH 3 OH, and CH 4 pressure in conjunction with reversibility formalisms reveal that all products form through H-assisted CO 2 activation and involve partially hydrogenated CO 2 -derived intermediates. Here, these inferences were verified by quantitative agreement between measured site-time yields and site-time yields predicted by closed form kinetic rate expressions in an integral reactor model over widely varying conditions (85-2000 kPa H 2 , 80-1500 kPa CO 2 , 0-45 kPa H 2 O, 0-21 kPa CO, 0-25 kPa CH 3 OH, 0-75 kPa CH 4 , 5-87 mol Mo s s mol CO 2 -1 ). Coverages calculated based on the kinetic model reveal that the Mo 2 C surface is covered with bidentate CO- and CO 2 -derived intermediates of the stoichiometry H 2 CO 2 and H 2 CO, indicating that H 2 and CO x do not compete for surface occupancy but instead adsorb cooperatively to form partially hydrogenated intermediates. Hydrogenation of the CO-derived H 2 CO** intermediate favors methanation, while hydrogenation of CO 2 -derived H 2 CO 2 ** favors methanol synthesis. Together, these findings demonstrate the ability of unsupported Mo 2 C to catalyze the hydrogenation of CO 2 to methanol at low temperatures and provide insight into the reaction network and mechanisms involved in its formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diffusion Blurring of GaAs Quantum Wells Grown at Low Temperature

The processes of the diffusion blurring of a periodic system of GaAs quantum wells separated by AlGaAs barriers are studied by photoluminescence spectroscopy. The system is grown by molecular-beam epitaxy at a low temperature (200°C) and additionally doped with Sb and P isovalent impurities. Postgrowth annealing at the temperature 750°C for 30 min induces an increase in the energy corresponding to the photoluminescence peak of the e1–hh1 exciton state in quantum wells because of blurring of the epitaxial GaAs/AlGaAs interfaces due to enhanced Al–Ga interdiffusion in the cation sublattice. For the Al concentration profile defined by linear diffusion into quantum wells, the Schrödinger equation for electrons and holes is solved. It is found that the experimentally observed energy position of the photoluminescence peak corresponds to the Al–Ga interdiffusion length 3.4 nm and to the effective diffusion coefficient 6.3 × 10{sup –17} cm{sup 2} s{sup –1} at the temperature 750°C. This value is found to be close to the corresponding value for GaAs quantum wells grown at low temperatures without additional doping with Sb and P impurities. From the results obtained in the study, it is possible to conclude that enhanced As–Sb and As–P interdiffusion in the anion sublattice only slightly influences the processes of Al–Ga interdiffusion in the cation sublattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Isomer-Selective Detection of Keto-Hydroperoxides in the Low-Temperature Oxidation of Tetrahydrofuran

Keto-hydroperoxides (KHPs) are reactive, partially oxidized intermediates that play a central role in chain-branching reactions during the gas-phase low-temperature oxidation of hydrocarbons and oxygenated species. Although multiple isomeric forms of the KHP intermediate are possible in complex oxidation environments when multiple reactant radicals exist that contain nonequivalent O 2 addition sites, isomer-resolved data of KHPs have not been reported. In this work, we provide partially isomer-resolved detection and quantification of the KHPs that form during the low-temperature oxidation of tetrahydrofuran (THF, cycl. -O–CH 2 CH 2 CH 2 CH 2 –). We describe how these short-lived KHPs were detected, identified, and quantified using integrated experimental and theoretical approaches. The experimental approaches were based on direct molecular-beam sampling from a jet-stirred reactor operated at near-atmospheric pressure and at temperatures between 500 and 700 K, followed by mass spectrometry with single-photon ionization via tunable synchrotron-generated vacuum-ultraviolet radiation, and the identification of fragmentation patterns. The interpretation of the experiments was guided by theoretical calculations of ionization thresholds, fragment appearance energies, and photoionization cross sections. On the basis of the experimentally observed and theoretically calculated ionization and fragment appearance energies, KHP isomers could be distinguished as originating from H-abstraction reactions from either the α-C adjacent to the O atom or the β-C atoms. Temperature-dependent concentration profiles of the partially resolved isomeric KHP intermediates were determined in the range of 500–700 K, and the results indicate that the observed KHP isomers are formed overwhelmingly (~99%) from the α-C THF radical. Furthermore, the comparisons of the partially isomer-resolved quantification of the KHPs to up-to-date kinetic modeling results reveal new opportunities for the development of a next-generation THF oxidation mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Applications of low temperature CO-oxidation catalysts to breathable gases

Modifications of tin oxide/precious metal catalysts described for use in CO2 lasers have also been developed for use in other applications; namely, as low temperature CO oxidation components in fire escape hoods/masks for mines, aircrafts, hotels, and offices and in sealed environments, such as hyperbaric chambers and submarines. Tin oxide/precious metal catalysts have been prepared on a variety of high surface area cloth substrates for application in fire escape hoods. These show high and stable CO oxidation capability (10 to the 4th power ppm CO reduced to 10 to the 1st power ppm CO) at GHSV of 37,000 h(-1) with water saturated inlet gas at body heat (37 C) and below. Water vapor plays an important role in the surface state/performance of tin oxide catalyst. Water-resistant formulations have been produced by the introduction of transition metal promoters. Tin oxide/precious metal catalysts have also been developed for CO oxidation in the North Sea diving environment. These are currently in use in a variety of hyperbaric chambers and diving vehicles. Ambient temperature operation and resistance to atmospheric water vapor have been demonstrated, and as a result, they offer a viable alternative to hopcalite or heated catalyst systems. A new range of non-tin oxide based low temperature CO oxidation catalysts is described. They are based on reducible metal oxides promoted with previous metals. Preliminary data on selected materials in the form of both cloth artifacts and shaped pellets are presented. They are expected to be applicable both to the breathable gas application area and to CO2 lasers.

Noordally, Ehsan↗

Symmetry breaking during low-temperature domain formation in micron-sized magnetite crystals

We report the results of synchrotron Bragg Coherent x-ray Diffraction Imaging (BCDI) experiments to investigate domain formation in a micron-sized magnetite crystal undergoing the Verwey transition at low temperature. A strong splitting of the measured 311 Bragg reflection was observed in the low-temperature phase, indicating the formation of domains. BCDI revealed pronounced strain distributions, characterized by a clear layered stripe domain structure in real-space. Stripes were seen only along the [001] crystallographic direction, normal to the substrate surface direction, breaking the symmetry of the cubic high-temperature phase. It is argued that other domain directions were suppressed by the sample mounting orientation. More surprisingly, only a single domain orientation was observed, suggesting an additional symmetry-breaking influence originating from the shape of the crystal. Gaining insight into how thermal effects induce the formation of layered or striped phases offers a valuable framework for understanding the development of mesoscopic domains and strain patterns in functional materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Scanning Superfluid-Turbulence Cascade by its Low-Temperature Cutoff

On the basis of a recently proposed scenario of the transformation of the Kolmogorov cascade into the Kelvin-wave cascade, we develop a theory of low-temperature cutoff. The theory predicts a specific behavior of the quantized vortex line density, L, controlled by the frictional coefficient, {alpha}(T)<<1, responsible for the cutoff. The curve ln L(ln{alpha}) is found to directly reflect the structure of the cascade, revealing four qualitatively distinct wave number regions. Excellent agreement with a recent experiment by Walmsley et al. [Phys. Rev. Lett. 99, 265302 (2007)]--in which L(T) has been measured down to T{approx}0.08 K--implies that the scenario of low-temperature superfluid turbulence is now experimentally validated and allows to quantify the Kelvin-wave cascade spectrum.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of low-temperature (120 °C) annealing on the carrier concentration and trap density in amorphous indium gallium zinc oxide thin film transistors

We report an investigation of the effects of low-temperature annealing on the electrical properties of amorphous indium gallium zinc oxide (a-IGZO) thin-film transistors (TFTs). X-ray photoelectron spectroscopy was used to characterize the charge carrier concentration, which is related to the density of oxygen vacancies. The field-effect mobility was found to decrease as a function of the charge carrier concentration, owing to the presence of band-tail states. By employing the transmission line method, we show that the contact resistance did not significantly contribute to the changes in device performance after annealing. In addition, using low-frequency noise analyses, we found that the trap density decreased by a factor of 10 following annealing at 120 °C. The switching operation and on/off ratio of the a-IGZO TFTs improved considerably after low-temperature annealing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗