Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEVEL WIDTHS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Limits to the H-mode pedestal pressure gradient in DIII-D

The spatial and temporal evolution of the total pedestal pressure profile has been measured during the pedestal evolution between successive edge localized modes (ELMs) of type-I ELMing H-mode discharges in DIII-D. Measurements are used to test a model that predicts that kinetic ballooning modes (KBMs) provide a strong constraint on the pedestal pressure gradient obtained during an inter-ELM cycle and cause the pedestal width to scale as the square root of the pedestal poloidal beta. Discharges in two different parameter regimes are examined for evidence that the evolution of the pressure gradient reaches a limit prior to the onset of an ELM. Both discharges show evidence of rapid evolution of the pressure profile very early in the recovery phase from an ELM. In one discharge, the pressure gradient reached approximate steady state within similar to 3 ms after the ELM event. In the other discharge, the pressure gradient just inboard of the last closed flux surface reached steady state early in the ELM recovery phase even as the pedestal expanded into the core and the maximum pressure gradient continued to rise during the remainder of the ELM cycle. Simple quantitative theoretical metrics show that pressure gradients in both discharges reached levels that were large enough to excite KBMs. In addition, the peeling-ballooning theory for the onset of type-I ELMs and the EPED1 model for pedestal height and width make predictions consistent with the data of both discharges.

CONFINEMENT↗

Ka-Band Scanning ARM Cloud Radar (KASACR), 2nd Generation CF-Radial Spectral Data, Vertically-Pointing Scan, Cross Mode (a1-level)

The Ka-Band Scanning ARM Cloud Radar (KASACR) records cloud properties. ARM's scanning cloud radars are dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (1.7 kW peak power) or an X-band (20 kW peak power). Beamwidths for Ka-bands paired with W-bands are roughly matched at 0.3 degrees. The X-band beamwidth is approximately 1 degree. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the KASACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. Measurements collected with the KASACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, and linear depolarization ratio. KASACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

Ka-Band Scanning ARM Cloud Radar (KASACR), 2nd Generation CF-Radial Spectral Data, Vertically-Pointing Scan, Cross-Polarization Mode (a1-level)

The Ka-Band Scanning ARM Cloud Radar (KASACR) records cloud properties. ARM's scanning cloud radars are dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (1.7 kW peak power) or an X-band (20 kW peak power). Beamwidths for Ka-bands paired with W-bands are roughly matched at 0.3 degrees. The X-band beamwidth is approximately 1 degree. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the KASACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. Measurements collected with the KASACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, and linear depolarization ratio. KASACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗

Minimum Weight Design of a Leaf Spring Tapered in Thickness and Width for the Hubble Space Telescope-Space Support Equipment

A linear elastic solution to the problem of minimum weight design of cantilever beams with variable width and depth is presented. The solution shown is for the specific application of the Hubble Space Telescope maintenance mission hardware. During these maintenance missions, delicate instruments must be isolated from the potentially damaging vibration environment of the space shuttle cargo bay during the ascent and descent phases. The leaf springs are designed to maintain the isolation system natural frequency at a level where load transmission to the instruments in a minimum. Nonlinear programming is used for the optimization process. The weight of the beams is the objective function with the deflection and allowable bending stress as the constraint equations. The design variables are the width and depth of the beams at both the free and the fixed ends.

Rodriguez, P. I.↗

Interpretation of the predissociation of the CO Rydberg W {sup 1}Π (v = 1) level

With the goal to interpret the experimental results obtained quite recently by Heays et al. [J. Chem. Phys. 141, 144311 (2014)] on the predissociation of the Rydberg W {sup 1}Π (v = 1) vibrational level of the CO molecule, we report herein ab initio potential energy curves of some of its valence and Rydberg states of both {sup 1}Π and {sup 3}Π symmetry. Our results confirm that the above vibrational level is perturbed by a new electronic {sup 1}Π state not observed until now. They correctly reproduce the linewidths of predissociation of the two interacting levels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Manifestation of exchange effects in heavy-ion interactions

Three different approaches to taking into account exchange effects in heavy-ion collisions are studied. Within the first of them, the lowest eigenstates of the Hamiltonian are treated as forbidden states. In the second approach, the eigenstates of the normalization kernel of the resonating-group model that correspond to zero eigenvalues are treated as forbidden states. The third approach takes additionally into account semiforbidden states. The {sup 16}O + {sup 16}O system is considered. A hybrid approach that combines the methods of discrete and continuous mathematics is developed for calculating the widths of narrow resonance states. The resonance width calculated within the approach that takes into account semiforbidden states proves to be sharply different from the widths obtained within traditional approaches.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DETECTIONS OF WATER ICE, HYDROCARBONS, AND 3.3 {mu}m PAH IN z {approx} 2 ULIRGs

We present the first detections of the 3 {mu}m water ice and 3.4 {mu}m amorphous hydrocarbon (HAC) absorption features in z {approx} 2 ULIRGs. These are based on deep rest-frame 2-8 {mu}m Spitzer Infrared Spectrograph spectra of 11 sources selected for their appreciable silicate absorption. The HAC-to-silicate ratio for our z {approx} 2 sources is typically higher by a factor of 2-5 than that observed in the Milky Way. This HAC 'excess' suggests compact nuclei with steep temperature gradients as opposed to predominantly host obscuration. Beside the above molecular absorption features, we detect the 3.3 {mu}m polycyclic aromatic hydrocarbon (PAH) emission feature in one of our sources with three more individual spectra showing evidence for it. Stacking analysis suggests that water ice, hydrocarbons, and PAH are likely present in the bulk of this sample even when not individually detected. The most unexpected result of our study is the lack of clear detections of the 4.67 {mu}m CO gas absorption feature. Only three of the sources show tentative signs of this feature at significantly lower levels than has been observed in local ULIRGs. Overall we find that the closest local analogs to our sources, in terms of 3-4 {mu}m color, HAC-to-silicate and ice-to-silicate ratios, as well as low PAH equivalent widths, are sources dominated by deeply obscured nuclei. Such sources form only a small fraction of ULIRGs locally and are commonly believed to be dominated by buried active galactic nuclei (AGNs). Our sample suggests that, in an absolute number, such buried AGNs are at least an order of magnitude more common at z {approx} 2 than today. The presence of PAH suggests that significant levels of star formation are present even if the obscured AGNs typically dominate the power budget.

79 ASTRONOMY AND ASTROPHYSICS↗

Study of Photon Strength Function of Actinides: the Case of (235)U, (238)Np and (241)Pu

The decay from excited levels in medium and heavy nuclei can be described in a statistical approach by means of Photon Strength Functions and Level Density distributions. The study of electromagnetic cascades following neutron capture based on the use of high efficiency detectors has been shown to be well suited for probing the properties of the Photon Strength Function of heavy (high level density) and/or radioactive (high background) nuclei. In this work we have investigated for the first time the validity of the recommended PSF of actinides, in particular {sup 235}U, {sup 238}Np and {sup 241}Pu. Our study includes the search for resonance structures in the PSF below Sn and draws conclusions regarding their existence and their characteristics in terms of energy, width and electromagnetic nature.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

First Year Wilkinson Microwave Anisotropy Probe (WMAP)Observations: Preliminary Maps and Basic Results

We present full sky microwave maps in five frequency bands (23 to 94 GHz) from the WMAP first year sky survey. Calibration errors are less than 0.5% and the low systematic error level is well specified. The cosmic microwave background (CMB) is separated from the foregrounds using multifrequency data. The sky maps are consistent with the 7 in. full-width at half-maximum (FWHM) Cosmic Background Explorer (COBE) maps. We report more precise, but consistent, dipole and quadrupole values. The CMB anisotropy obeys Gaussian statistics with -58 less than f(sub NL) less than 134 (95% CL). The 2 less than or = l less than or = 900 anisotropy power spectrum is cosmic variance limited for l less than 354 with a signal-to-noise ratio greater than 1 per mode to l = 658. The temperature-polarization cross-power spectrum reveals both acoustic features and a large angle correlation from reionization. The optical depth of reionization is tau = 0.17 +/- 0.04, which implies a reionization epoch of t(sub r) = 180(sup +220, sub -80) Myr (95% CL) after the Big Bang at a redshift of z(sub r) = 20(sup +10, sub -9) (95% CL) for a range of ionization scenarios. This early reionization is incompatible with the presence of a significant warm dark matter density. A best-fit cosmological model to the CMB and other measures of large scale structure works remarkably well with only a few parameters. The age of the best-fit universe is t(sub 0) = 13.7 +/- 0.2 Gyr old. Decoupling was t(sub dec) = 379(sup +8, sub -7)kyr after the Big Bang at a redshift of z(sub dec) = 1089 +/- 1. The thickness of the decoupling surface was Delta(sub z(sub dec)) = 195 +/- 2. The matter density of the universe is Omega(sub m)h(sup 2) = 0.135(sup +0.008, sub -0.009) the baryon density is Omega(sub b)h(sup 2) = 0.0224 +/- 0.0009, and the total mass-energy of the universe is Omega(sub tot) = 1.02 +/- 0.02. There is progressively less fluctuation power on smaller scales, from WMAP to fine scale CMB measurements to galaxies and finally to the Ly-alpha forest. This is accounted for with a running spectral index, significant at the approx. 2(sigma) level. The spectral index of scalar fluctuations is fit as n(sub s) = 0.93 +/-0.03 at wavenumber k(sub o) = 0.05/Mpc ((sub eff) approx. = 700), with a slope of dn(sub s)/d I(sub nk) = -0.031(sup + 0.016, sub -0.018) in the best-fit model.

Bennett, C. L.↗

Search for a heavy right-handed W boson and a heavy neutrino in events with two same-flavor leptons and two jets at $\sqrt{s}=$ 13 TeV

A search for a heavy right-handed W boson (W$_{R}$) decaying to a heavy right-handed neutrino and a charged lepton in events with two same-flavor leptons (e or μ) and two jets, is presented. The analysis is based on proton-proton collision data, collected by the CMS Collaboration at the LHC in 2016 and corresponding to an integrated luminosity of 35.9 fb$^{−1}$. No significant excess above the standard model expectation is seen in the invariant mass distribution of the dilepton plus dijet system. Assuming that couplings are identical to those of the standard model, and that only one heavy neutrino flavor N$_{R}$ contributes significantly to the W$_{R}$ decay width, the region in the two-dimensional $ \left({m}_{{\mathrm{W}}_{\mathrm{R}}},{m}_{{\mathrm{N}}_{\mathrm{R}}}\right) $ mass plane excluded at 95% confidence level extends to approximately $ {m}_{{\mathrm{W}}_{\mathrm{R}}}=4.4 $ TeV and covers a large range of right-handed neutrino masses below the W$_{R}$ boson mass. This analysis provides the most stringent limits on the W$_{R}$ mass to date.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Photon echo of an ultranarrow optical transition of {sup 167}Er{sup 3+} in {sup 7}LiYF{sub 4} crystals

The longitudinal and transverse relaxation times for a transition between hyperfine sublevels of the lower electronic states of the {sup 4}I{sub 15/2} and {sup 4}I{sub 9/2} multiplets of {sup 167}Er{sup 3+} ions in {sup 7}LiYF{sub 4} crystals have been determined for the first time using two-pulse and stimulated photon echo measurements in zero magnetic field at a temperature of 4 K. The decay of the photon echo signal has been shown to be modulated, which is tentatively attributed to the superhyperfine interaction of the {sup 167}Er{sup 3+} ions with their {sup 19}F{sup −} nearest neighbours. The contributions of various types of interaction to the ultranarrow linewidth (∼24 MHz) of the transition in question are discussed. Our results demonstrate that this optical transition of the {sup 167}Er{sup 3+} ion in {sup 7}LiYF{sub 4} crystals is potentially attractive for use in Raman quantum memory schemes. (paper)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

THE EFFECT OF RADIATION PRESSURE ON EMISSION-LINE PROFILES AND BLACK HOLE MASS DETERMINATION IN ACTIVE GALACTIC NUCLEI

We present a new analysis of the motion of pressure-confined, broad-line region (BLR) clouds in active galactic nuclei (AGNs) taking into account the combined influence of gravity and radiation pressure. We calculate cloud orbits under a large range of conditions and include the effect of column density variation as a function of location. The dependence of radiation pressure force on the level of ionization and the column density are accurately computed. The main results are as follows. (1) The mean cloud locations (r{sub BLR}) and line widths (FWHMs) are combined in such a way that the simple virial mass estimate, r{sub BLR}, FWHM{sup 2}/G, gives a reasonable approximation to M{sub BH} even when radiation pressure force is important. The reason is that L/M rather than L is the main parameter affecting the planar cloud motion. (2) Reproducing the mean observed r{sub BLR}, FWHM, and line intensity of H{beta} and C IV {lambda}1549 requires at least two different populations of clouds. (3) The cloud location is a function of both L {sup 1/2} and L/M. Given this, we suggest a new approximation for r{sub BLR} which, when inserted into the BH mass equation, results in a new approximation for M{sub BH}. The new expression involves L {sup 1/2}, FWHM, and two constants that are obtained from a comparison with available M-{sigma}* mass estimates. It deviates only slightly from the old mass estimate at all luminosities. (4) The quality of the present black hole mass estimators depends, critically, on the way the present M-{sigma}* AGN sample (29 objects) represents the overall population, in particular the distribution of L/L{sub Edd}.

79 ASTRONOMY AND ASTROPHYSICS↗

A DIRECT MEASUREMENT OF THE TOTAL GAS COLUMN DENSITY IN ORION KL

The large number of high-J lines of C{sup 18}O available via the Herschel Space Observatory provide an unprecedented ability to model the total CO column density in hot cores. Using the emission from all the observed lines (up to J = 15-14), we sum the column densities in each individual level to obtain the total column after correcting for the population in the unobserved states. With additional knowledge of source size, V{sub LSR}, and line width, and both local thermodynamic equilibrium (LTE) and non-LTE modeling, we have determined the total C{sup 18}O column densities in the Extended Ridge, Outflow/Plateau, Compact Ridge, and Hot Core components of Orion KL to be 1.4 Multiplication-Sign 10{sup 16} cm{sup -2}, 3.5 Multiplication-Sign 10{sup 16} cm{sup -2}, 2.2 Multiplication-Sign 10{sup 16} cm{sup -2}, and 6.2 Multiplication-Sign 10{sup 16} cm{sup -2}, respectively. We also find that the C{sup 18}O/C{sup 17}O abundance ratio varies from 1.7 in the Outflow/Plateau, 2.3 in the Extended Ridge, 3.0 in the Hot Core, and to 4.1 in the Compact Ridge. This is in agreement with models in which regions with higher ultraviolet radiation fields selectively dissociate C{sup 17}O, although care must be taken when interpreting these numbers due to the size of the uncertainties in the C{sup 18}O/C{sup 17}O abundance ratio.

79 ASTRONOMY AND ASTROPHYSICS↗

Search for heavy pseudoscalar and scalar bosons decaying to a top quark pair in proton–proton collisions at $\sqrt{s}$ = 13 TeV

A search for pseudoscalar or scalar bosons decaying to a top quark pair ($\textrm{t}$$\bar{\textrm{t}}$) in final states with one or two charged leptons is presented. The analyzed proton–proton collision data was recorded at $\sqrt{s}$ = 13 TeV by the CMS experiment at the CERN LHC and corresponds to an integrated luminosity of 138 fb -1 . The invariant mass $m_{{\textrm{t}}{\bar{\textrm{t}}}}$ of the reconstructed $\textrm{t}$$\bar{\textrm{t}}$ system and variables sensitive to its spin and parity are used to discriminate against the standard model background. Interference between pseudoscalar or scalar boson production and the standard model $\textrm{t}$$\bar{\textrm{t}}$ continuum is included, leading to peak-dip structures in the $m_{{\textrm{t}}{\bar{\textrm{t}}}}$ distribution. An excess of the data above the background prediction, based on perturbative quantum chromodynamics (QCD) calculations, is observed near the kinematic $\textrm{t}$$\bar{\textrm{t}}$ production threshold, while good agreement is found for high $m_{{\textrm{t}}{\bar{\textrm{t}}}}$. The data are consistent with the background prediction if the contribution from a simplified model of a color-singlet $^1\textrm{S}^{|1|}_0$ ${{\textrm{t}}{\bar{\textrm{t}}}}$ quasi-bound state $η_{\textrm{t}}$, inspired by nonrelativistic QCD, is added. Upper limits at 95% confidence level are set on the coupling between the pseudoscalar or scalar bosons and the top quark for boson masses in the range 365–1000 GeV, relative widths between 0.5% and 25%, and two background scenarios with or without $η_{\textrm{t}}$ contribution.

CMS↗

Unconventional Z n parton states at ν=7/3: Role of finite width

A recent work [Balram, Jain, and Barkeshli, Phys. Rev. Res. 2, 013349 (2020)] has suggested that an unconventional state describing Zn superconductivity of composite bosons, which supports excitations with charge 1/(3n) of the electron charge, is energetically better than the Laughlin wave function at \nu=7/3 in GaAs systems. All experiments to date, however, are consistent with the latter. To address this discrepancy, we study the effect of finite width on the ground state and predict a phase transition from an unconventional Zn state at small widths to the Laughlin state for widths exceeding ~1.5 magnetic lengths. Here, we also determine the parameter region where an unconventional state is stabilized in the one-third filled zeroth Landau level in bilayer graphene. The roles of Landau level mixing and spin are also considered.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mapping gravitational lensing of the CMB using local likelihoods

We present a new estimation method for mapping the gravitational lensing potential from observed CMB intensity and polarization fields. Our method uses Bayesian techniques to estimate the average curvature of the potential over small local regions. These local curvatures are then used to construct an estimate of a low pass filter of the gravitational potential. By utilizing Bayesian/likelihood methods one can easily overcome problems with missing and/or nonuniform pixels and problems with partial sky observations (E- and B-mode mixing, for example). Moreover, our methods are local in nature, which allow us to easily model spatially varying beams, and are highly parallelizable. We note that our estimates do not rely on the typical Taylor approximation which is used to construct estimates of the gravitational potential by Fourier coupling. We present our methodology with a flat sky simulation under nearly ideal experimental conditions with a noise level of 1 {mu}K-arcmin for the temperature field, {radical}(2) {mu}K-arcmin for the polarization fields, with an instrumental beam full width at half maximum (FWHM) of 0.25 arcmin.

79 ASTRONOMY AND ASTROPHYSICS↗

A Time-Gated, Time-Correlated Single-Photon-Counting Lidar to Observe Atmospheric Clouds at Submeter Resolution

Most lidars used for cloud observations have the range resolution of about 10 m, so they are incapable of resolving submeter-scale processes that are crucial to cloud evolution. This article describes a prototype of a ground-based, vertically pointing, time-gated, time-correlated single-photon-counting lidar (referred to as the T2 lidar) developed to explore atmospheric clouds at range resolution two orders of magnitude finer than traditional atmospheric lidars. The T2 lidar emits green-light pulses (532 nm) at a repetition rate of 20.6 kHz and a pulse width of ∼650 ps, which enables the observation of aerosol and cloud layers at heights from a few hundred meters to 7.28 km above the ground level at range resolution down to 10 cm. In addition, a digital delay pulse generator controls the detector to only receive photons for a short period after each laser pulse. This time-gated technique blocks photons arriving from regions outside the target zone, thus significantly reducing the noise level and allowing observation even inside clouds. Initial observations show that the T2 lidar can detect sharp cloud boundaries and fine structures near the cloud base. Such refined measurements of cloud structure could lead to an improved understanding of microphysical processes such as droplet activation, entrainment and mixing, and precipitation.

54 ENVIRONMENTAL SCIENCES↗

Magellan radar to reveal secrets of enshrouded Venus

Imaging Venus with a synthetic aperture radar (SAR) with 70 percent global coverage at 1-km optical line-pair resolution to provide a detailed global characterization of the volcanic land-forms on Venus by an integration of image data with altimetry is discussed. The Magellan radar system uses navigation predictions to preset the radar data collection parameters. The data are collected in such a way as to preserve the Doppler signature of surface elements and later they are transmitted to the earth for processing into high-resolution radar images. To maintain high accuracy, a complex on-board filter algorithm allows the altitude control logic to respond only to a narrow range of expected photon intensity levels and only to signals that occur within a small predicted interval of time. Each mapping pass images a swath of the planet that varies in width from 20 to 25 km. Since the orbital plane of the spacecraft remains fixed in the inertial space, the slow rotation of Venus continually brings new areas into view of the spacecraft.

Saunders, R. Stephen↗