Reliability's role in key project decisions
Reliability in key project decision making, including failure mode/effect analyses, design tradeoff, baseline meetings, hardware storage and data bases
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Reliability in key project decision making, including failure mode/effect analyses, design tradeoff, baseline meetings, hardware storage and data bases
This paper reviews recent progress in the key hypersonic technologies, which has been good despite a relatively low priority. Successful hypersonic research engine tests have been made. Active cooling system analyses have shown potential for weight savings, alleviation of structural design problems, and long airframe life. Maturing computerized flow field theories permit optimizing engine-airframe performance. Adequate progress in the future requires an expanded technology program emphasizing hydrogen usage. A hydrogen fueled hypersonic research airplane is essential, providing critical flight data and operational experience.
Cosmic ray spallation produced He-3, Ne-21, Ne-22 and Ar-38 have been measured as a function of depth in three mutually perpendicular cores (56, 51, and 21 cm) taken from the 120-kg L chondrite found near Keyes, Oklahoma. The data obtained represent the first experimental determination of the depth variation in the production rates of these cosmogenic nuclides in a single stone meteorite. Fifteen samples across the 56-cm core showed maximum concentration changes of 14% He-3, 28% Ne-21, 19% He-3/Ne-21, and 5% Ne-22/Ne-21. The 51-cm core showed somewhat smaller concentration changes.
A communication system using differential phase-shift-keying (DPSK) transmits and receives binary data without requiring timing or phase reference signals. The system encodes and modulates the data at the transmitter, and decodes and demodulates the data at the receiver, without ambiguity as to the data content.
A differential phase shift keyed signal resolver resolves the differential phase shift in the incoming signal to determine the data content thereof overcoming phase uncertainty without requiring a transmitted reference signal.
Selection of a particular signal set array for a bandwidth-constrained multiple phase-and-amplitude-shift-keyed (MPASK) communication system for a linear additive Gaussian noise channel requires consideration of factors such as average and/or peak power vs symbol error probability, signal amplitude dynamic range, simplicity of generation and detection, and number of bit errors per symbol error (Gray code properties). A simple technique is presented for generating and optimally detecting the honeycomb (hexagonal) signal set, i.e., the signal set that has the tightest sphere-packing properties. The symbol and bit error probability performance of this set is compared to other two-dimensional signal sets that have been investigated in the literature, and is shown to be slightly superior from an average power standpoint. The paper concludes with a comparison of all of these signal sets from the standpoint of the factors listed above.
The design considerations and performance characteristics of the 'high intensity' (HI) solar cell are presented. A high intensity solar system was analyzed to determine its cost effectiveness and to assess the benefits of further improving HI cell efficiency. It is shown that residential sized systems can be produced at less than $1000/kW peak electric power. Due to their superior high intensity performance characteristics compared to the conventional and VMJ cells, HI cells and light concentrators may be the key to low cost photovoltaic power.
Radionuclide concentration data for six samples from two cores of the Keyes chondrite are presented. The weighted average potassium content for samples was about 675 ppm, somewhat lower than the 800-900 ppm typically found in L chondrites. Spectra were analyzed for U and Th, with upper limits established at approximately 100 and 200 ppb, respectively.
A great deal of research is presently being conducted to study modulation schemes in order to reduce the bandwidth of digital communications. These M-ary amplitude and phase shift keying (MAPSK) modulation systems place new requirements on TWT amplifiers in space applications in that the various signal sets usually include two or more discrete output power levels as well as discrete phases at each power level. This paper presents a variety of predistortion schemes to circumvent the TWT problems of AM distortion and AM-to-PM conversion in order to produce MAPSK signal sets. A feedback scheme is presented to correct for long-term phase and amplitude drifts in the transmitter. A complete transmitter is proposed using predistortion to produce the desired MAPSK signal set at very high data rates including the possible use of a feedback stabilization scheme.
A key ingredient in the establishment of safe life times for critical components is the means of reliably detecting flaws which may potentially exist. Currently used nondestructive evaluation procedures are successful in detecting life limiting defects; however, the development of automated and computer aided NDE technology permits even greater assurance of flight safety.
Because of the symmetry in most two-dimensional signal constellations, ambiguities exist at the receiver as to the exact phase orientation of the received signal set. In PSK systems, this ambiguity is resolved by the use of differential encoding. This paper presents differential encoding techniques which can be used with a variety of symmetric signal sets to remove their phase ambiguity. While not proven to be optimum, the techniques do have low performance penalties relative to the uncoded performance. The key to reducing the performance penalty is to use the minimum amount of differential encoding necessary to resolve the ambiguity. Examples of encoding techniques for several common signal constellations are given, including their performance penalties.
A bandwidth compressive modem making use of multi-amplitude minimum shift keying (MAMSK) has been designed and implemented in a laboratory environment at microwave frequencies. This system achieves a substantial bandwidth reduction over binary PSK and operates within 0.5 dB of theoretical performance. A number of easily implemented microwave transmitters have been designed to generate the required set of 16 signals. The receiver has been designed to work at 1 Mbit/s and contains the necessary phase tracking, AGC, and symbol synchronization loops as well as a lock detector, SNR estimator and provisions for differential decoding. This paper describes this entire system and presents the experimental results.
The solar energy hot water system installed in the Quality Inn, Key West, Florida, which consists of four buildings is described. Three buildings are low-rise, two-story buildings containing 100 rooms. The fourth is a four-story building with 48 rooms. The solar system was designed to provide approximately 50 percent of the energy required for the domestic hot water system. The solar system consists of approximately 1400 square feet of flat plate collector, two 500 gallon storage tanks, a circulating pump, and a controller. Operation of the system was begun in April 1978, and has continued to date with only three minor interruptions for pump repair. In the first year of operation, it was determined that the use of the solar facility resulted in forty percent fuel savings.
The procedure used in the identification and mapping of irrigated lands in six counties of western Kansas is presented and key considerations for the identification of irrigated lands during the project are discussed. The procedure involved the compilation of a field-by-field map of irrigated lands on the basis of multi-date Landsat band 5 imagery, the entry of map data into a computer, and the retrieval of the data in the form of maps, tables and statistics. Comparison of the positional results of the image interpretation with statistical data for a single county was used to verify the mapping procedure, as accuracies of from 80-100% were obtained, depending on the type of crop. Considerations relevant to the identification of irrigated land on the basis of remote sensing data include the form of the final data, irrigation practices in the area, the soil moisture budget, the number and kinds of crops, the crop calendar, and the availability of usable imagery.
Serial minimum-shift keyed (MSK) modulation, a technique for generating and detecting MSK using series filtering, is ideally suited for high data rate applications provided the required conversion and matched filters can be closely approximated. Low-pass implementations of these filters as parallel inphase- and quadrature-mixer structures are characterized in this paper in terms of signal-to-noise ratio (SNR) degradation from ideal and envelope deviation. Several hardware implementation techniques utilizing microwave devices or lumped elements are presented. Optimization of parameter values results in realizations whose SNR degradation is less than 0.5 dB at error probabilities of .000001.
Astrophysical history, particularly that period extending from stellar nucleosynthesis events to the formation of meteorites, is discussed as the key element for the understanding of isotopic anomalies in meteorites. The bulk homogeneity of the interstellar medium is considered, and it is argued that, despite the presence of spatial inhomogeneities due to different nucleosynthesis rates in different parts of the galaxy and supernova ejecta, a cosmic chemical memory of nucleosynthesis patterns, rather than an inhomogeneous injection, is the source of isotopic anomalies. According to this view, volatility patterns and some isotopic patterns are mapped onto a grain-size spectrum, and the FUN systematics may be explained by interstellar sputtering. Furthermore, meteoritic He and Ne abundances are inferred to be presolar, and the ubiquitous titanium isotopic anomalies are explained by processes of chemical fixation and condensation in varying environments.
A key element to improved industry productivity is effective management of CAD/CAM information. To stimulate advancements in this area, a joint NASA/Navy/Industry project designated Integrated Programs for Aerospace-Vehicle Design (IPAD) is underway with the goal of raising aerospace industry productivity through advancement of technology to integrate and manage information involved in the design and manufacturing process. The project complements traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer-Aided Manufacturing (ICAM) program to advance CAM technology. IPAD research is guided by an Industry Technical Advisory Board (ITAB) composed of over 100 repesentatives from aerospace and computer companies. The IPAD accomplishments to date in development of requirements and prototype software for various levels of company-wide CAD/CAM data management are summarized and plans for development of technology for management of distributed CAD/CAM data and information required to control future knowledge-based CAD/CAM systems are discussed.
A key element to improved industry productivity is effective management of CAD/CAM information. To stimulate advancements in this area, a joint NASA/Navy/industry project designated Intergrated Programs for Aerospace-Vehicle Design (IPAD) is underway with the goal of raising aerospace industry productivity through advancement of technology to integrate and manage information involved in the design and manufacturing process. The project complements traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer-Aided Manufacturing (ICAM) program to advance CAM technology. IPAD research is guided by an Industry Technical Advisory Board (ITAB) composed of over 100 representatives from aerospace and computer companies.