Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Iron Oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Mineralogy at Gusev Crater and Meridiani Planum from the Moessbauer Spectrometers on the Mars Exploration Rovers

The Moessbauer spectrometers on the twin MER rovers Spirit and Opportunity have provided significant new information on the distribution of iron among its oxidation states, the identification of the mineralogical composition of iron-bearing phases, and the distribution of iron among those phases for rock and soil at Gusev Crater and Meridiani Planum. The plains of Gusev Crater are dominated by olivine-bearing basalt (approximately Fo(60)) and Fe(3+)/Fe(total)=0.1 - 0.5. The oxide mineral generally present is magnetite. In contrast, initial results for the Columbia Hills are consistent with the presence of hematite and a ferrous iron phase, possibly pyroxene. Gusev spectra also have a ferric doublet (not jarosite) that is tentatively associated with nano-phase ferric oxide. A wider diversity of material is present at Meridiani Planum. Significantly, jarosite-bearing outcrop is present throughout the region, with good exposures in impact craters such as Eagle and Endurance (Fe(3+)/Fe (total) approx. 0.9). The Moessbauer identification of jarosite (a hydroxyl-bearing sulfate mineral) is evidence for aqueous, acid-sulfate processes on Mars. Hematite is observed within the outcrop matrix and in the spheroidal particles (Blueberries) found within the outcrop and as a surface lag. An isolated rock (Bounce Rock) was the only sample at either landing site whose iron-bearing phase was dominated by pyroxene. The basaltic sand in the central portion of Eagle crater, in the intercrater plains, and between slabs of outcrop at both Eagle and Endurance craters is olivine-bearing basalt. The widespread occurrence of olivine-bearing basalt at both MER landing sites implies that physical, rather than chemical, weathering processes dominate at the surface of contemporary Mars.

Morris, Richard V.↗
NASA NTRS1991

An empirical approach to predicting long term behavior of metal particle based recording media

Alpha iron particles used for magnetic recording are prepared through a series of dehydration and reduction steps of alpha-Fe2O3-H2O resulting in acicular, polycrystalline, body centered cubic (bcc) alpha-Fe particles that are single magnetic domains. Since fine iron particles are pyrophoric by nature, stabilization processes had to be developed in order for iron particles to be considered as a viable recording medium for long term archival (i.e., 25+ years) information storage. The primary means of establishing stability is through passivation or controlled oxidation of the iron particle's surface. Since iron particles used for magnetic recording are small, additional oxidation has a direct impact on performance especially where archival storage of recorded information for long periods of time is important. Further stabilization chemistry/processes had to be developed to guarantee that iron particles could be considered as a viable long term recording medium. In an effort to retard the diffusion of iron ions through the oxide layer, other elements such as silicon, aluminum, and chromium have been added to the base iron to promote more dense scale formation or to alleviate some of the non-stoichiometric behavior of the oxide or both. The presence of water vapor has been shown to disrupt the passive layer, subsequently increasing the oxidation rate of the iron. A study was undertaken to examine the degradation in magnetic properties as a function of both temperature and humidity on silicon-containing iron particles between 50-120 deg C and 3-89 percent relative humidity. The methodology to which experimental data was collected and analyzed leading to predictive capability is discussed.

Hadad, Allan S.↗
NASA NTRS2006

Moessbauer Mineralogical Evidence for Aqueous Processes at Gusev Crater and Meridiani Planum

The Moessbauer spectrometers on the MER rovers have measured the relative abundances of iron with respect to both oxidation state and iron-bearing phase at Gusev Crater (Spirit rover) and Meridiani Planum (Opportunity rover). The assemblage of phases indicates aqueous alteration processes at both landing sites. Although the rock and soil of the Gusev Crater plains are dominated by Fe(2+) in olivine-bearing basalt (approx.Fo60), a Fe(3+)-rich component (nanophase ferric oxide, np-Ox) has significant abundance in surface soils (13-28% of total Fe) and in the surface coatings (rinds) of certain rocks (39%) but not in rock interiors exposed by grinding (5-6%). The mode of occurrence of np-Ox implies that it is the product of oxidative alteration of Fe(2+) silicate and oxide phases in the presence of H2O. The ubiquitous presence of sulfur in soil and in rock coatings, as determined by the MER-A APXS instrument, suggests that the alteration occurred under acid-sulfate conditions, so that both hydrolytic and sulfatic reactions are viable. A possible source for the weathering agents is volcanic emanations rich in H2O and SO2. Generally, rocks in the Columbia Hills are significantly more altered than those in the Gusev plains, with a higher proportion of Fe(3+) oxide phases compared to Fe(2+) silicate phases. This mineralogical dichotomy implies a difference in the timing, rate, duration, and/or mechanism of alteration for basaltic material in the Gusev plains compared to basaltic material in the Columbia Hills. It is possible, for example, that the basaltic material in the Columbia Hills underwent aqueous alteration in a paleoclimate that favored nearly complete alteration and that the basaltic material of the Gusev plains will not achieve the degree of alteration exhibited by the Columbia Hills under current martian surface conditions.

Morris, R. V.↗
NASA NTRS1991

New evidence for a dramatic rise in atmosphere oxygen ca. 1,900 m.y. ago

Several lines of geologic evidence have pointed to a significant increase in P sub O2 about 2,000 m.y. ago, but the magnitude of P sub O2 before and after that time has been quite uncertain. The data that we have recently accumulated suggest that P sub O2 was approximately less than 2 x 10 (exp -3) atm more than 2,000 m.y. ago, and approximately greater than 0.03 atm more recently than ca. 1,900 m.y. ago. These estimates are based on the behavior of iron in Precambrian weathering horizons. More than ca. 2,000 m.y. ago, Fe(+2), released during the weathering of basalts was not oxidized to Fe(+3), and was removed in ground water from the upper layers of soil horizons. More recently than ca. 1,850 m.y. ago, Fe(+2) was oxidized to Fe(+3) and precipitated as iron oxides and hydroxides in such soil horizons and in the weathering products of a carbonate facies banded iron formation in Griqualand West, South Africa. The O2 content of the atmosphere must have increased dramatically about 1,900 m.y. ago to explain these observations. The reasons for the increase are still obscure, but are probably related to changes in the biologic productivity of the oceans. Eukaryotes appear to have developed shortly after the increase in P sub O2, perhaps in response to the subsequent increase in the supply of nitrate from the atmosphere to the oceans.

Holland, H. D.↗
DOE OSTI2023

Correlating chemistry and mass transport in sustainable iron production

Steelmaking contributes 8% to the total CO 2 emissions globally, primarily due to coal-based iron ore reduction. Clean hydrogen-based ironmaking has variable performance because the dominant gas–solid reduction mechanism is set by the defects and pores inside the mm- to nm-sized oxide particles that change significantly as the reaction progresses. While these governing dynamics are essential to establish continuous flow of iron and its ores through reactors, the direct link between agglomeration and chemistry is still contested due to missing measurements. In this work, we directly measure the connection between chemistry and agglomeration in the smallest iron oxides relevant to magnetite ores. Using synthesized spherical 10-nm magnetite particles reacting in H 2 , we resolve the formation and consumption of wüstite (Fe 1-x O)—the step most commonly attributed to whiskering. Using X-ray diffraction, we resolve crystallographic anisotropy in the rate of the initial reaction. Complementary imaging demonstrated how the particles self-assemble, subsequently react, and grow into elongated “whisker” structures. Our insights into how morphologically uniform iron oxide particles react and agglomerate in H 2 reduction enable future size-dependent models to effectively describe the multiscale aspects of iron ore reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Cobalt-free layered oxide cathodes

A cathode and a battery providing the cathode is provided. The cathode comprises a lithium metal oxide. The lithium metal oxide comprises nickel, aluminum, and iron. The lithium metal oxide is substantially free of cobalt. The battery comprises an anode, the cathode, a separator, and an electrolyte.

Belharouak, Ilias↗
NASA NTRS1990

Signatures of aging silicate dust

A self-consistent explanation for the width, strength, and position of spectral features which may be diagnostic of the structure and composition of circumstellar and interstellar silicate grains is presented based on a long series of laboratory experiments using simple oxide analogs. The ratio of the integrated absorption strength of the grains near 10 mu to that near 20 mu is shown to decrease monotonically with increased processing. This ratio may be diagnostic of the relative age of the silicate. The oxidation state of iron in the grains is directly related to both the near-IR grain opacity and enhanced absorption in the UV. The oxidation state of both iron and silicon is directly related to the rate of nucleation, growth, and processing in a circumstellar outflow, as well as to the processing history of the grain after it reaches the interstellar medium. Other diagnostic indicators of the average silicon oxidation state, degree of structural polymerization, and dispersion in the average degree of structural polymerization are discussed.

Nuth, Joseph A., III↗
DOE OSTI2023

Fe(III) (oxyhydr)oxide reduction by the thermophilic iron-reducing bacterium Desulfovulcanus ferrireducens

Some thermophilic bacteria from deep-sea hydrothermal vents grow by dissimilatory iron reduction, but our understanding of their biogenic mineral transformations is nascent. Mineral transformations catalyzed by the thermophilic iron-reducing bacterium Desulfovulcanus ferrireducens during growth at 55°C were examined using synthetic nanophase ferrihydrite, akaganeite, and lepidocrocite separately as terminal electron acceptors. Spectral analyses using visible-near infrared (VNIR), Fourier-transform infrared attenuated total reflectance (FTIR-ATR), and Mössbauer spectroscopies were complemented with x-ray diffraction (XRD) and transmission electron microscopy (TEM) using selected area electron diffraction (SAED) and energy dispersive X-ray (EDX) analyses. The most extensive biogenic mineral transformation occurred with ferrihydrite, which produced a magnetic, visibly dark mineral with spectral features matching cation-deficient magnetite. Desulfovulcanus ferrireducens also grew on akaganeite and lepidocrocite and produced non-magnetic, visibly dark minerals that were poorly soluble in the oxalate solution. Bioreduced mineral products from akaganeite and lepidocrocite reduction were almost entirely absorbed in the VNIR spectroscopy in contrast to both parent minerals and the abiotic controls. However, FTIR-ATR and Mössbauer spectra and XRD analyses of both biogenic minerals were almost identical to the parent and control minerals. The TEM of these biogenic minerals showed the presence of poorly crystalline iron nanospheres (50–200 nm in diameter) of unknown mineralogy that were likely coating the larger parent minerals and were absent from the controls. The study demonstrated that thermophilic bacteria transform different types of Fe(III) (oxyhydr)oxide minerals for growth with varying mineral products. These mineral products are likely formed through dissolution-reprecipitation reactions but are not easily predictable through chemical equilibrium reactions alone.

12 reflectance spectroscopy↗
NASA NTRS1964

Studies of Lubricating Materials in Vacuum

Lubricating materials for use in a vacuum environment have been the subject of a series of experimental investigations. Evaporation properties were evaluated for solid polymeric compositions. Friction and wear studies explored the behavior during sliding contact for series of polymeric compositions, binary alloys containing soft film-forming phases, complex alloys with film-forming materials, and a burnished MoS2 film. Friction and wear experiments were conducted at 10(exp-9)mm Hg with a 3/16-inch-radius-hemisphere rider specimen sliding on the flat surface of a rotating 2-1/2-inch-diameter disk specimen with materials that had low rates of evaporation. The influence of fillers in polytetrafluoroethylene (PTFE) on decomposition during vacuum friction studies was determined with a mass spectrometer. A real advantage in reducing decomposition and improving friction wear properties is gained by adding fillers (e.g., copper) that improve thermal conductivity through the composite materials. A polyimide and an epoxy-MoS2 composition material were found to have better friction and wear properties than PTFE compositions. A series of alloys (cast binary as well as more complex alloys) that contained microinclusions of potential film-forming material was studied. These materials replaced the normal surface oxides as they were worn away on sliding contact. Iron sulfide, nickel oxide, and tin are typical film-forming materials employed and were demonstrated to be effective in inhibiting surface welding and reducing friction. A burnished MoS2 film applied to type 440-C stainless steel in argon with a rotating soft wire brush had good endurance properties but somewhat higher friction than commercially available bonded films. An oil film applied to the burnished MoS2 markedly reduced its endurance life.

WEAR↗
NASA NTRS1993

Backscatter Mossbauer Spectrometer (BaMS) for extraterrestrial applications

Mossbauer spectroscopy is a nuclear gamma resonance technique particularly well suited to the study of materials that contain iron (Fe-57). It can provide information on the oxidation state of iron as well as the type and proportion of iron-containing mineral species in a sample of interest. Iron Mossbauer spectroscopy (FeMS) has been applied to samples believed to have come from Mars (SNC meteorites) and has been helpful in refining the choice among putative Martian surface materials by suggesting a likely nanophase component of the Martian regolity. FeMS spectrum of a Martial analogue material (Hawaiian palagonite) is shown; it is dominated by ferric-bearing phases and shows evidence of a nanophase component. FeMS has also been applied to lunar materials. It can be used to measure the maturity of lunar surface material and has been proposed as a prospector for lunar ilmenite, an oxygen resource mineral. Several years ago we suggested a backscatter Mossbauer spectrometer (BaMS) for a Mars rover mission. Backscatter design was selected as most appropriate for in-situ application because no sample preparation is required. Since that time, we have continued to develop the BaMS instrument in anticipation that it would eventually find a home on a NASA planetary mission. Gooding proposed BaMS as a geochemistry instrument on MESUR. More recently, an LPI workshop has recommended that BaMS be included in a three-instrument payload on the next (1996?) lunar lander.

Agresti, D. G.↗
DOE OSTI2021

Structure and Reactivity of a High-Spin, Nonheme Iron(III)- Superoxo Complex Supported by Phosphinimide Ligands

Nonheme iron oxygenases utilize dioxygen to accomplish challenging chemical oxidations. Additionally, a further understanding of the Fe-O 2 intermediates implicated in these processes is challenged by their highly transient nature. To that end, we have developed a ligand platform featuring phosphinimide donors intended to stabilize oxidized, high-spin iron complexes. O 2 exposure of single crystals of a three-coordinate Fe(II) complex of this framework allowed for in crystallo trapping of a terminally bound Fe-O 2 complex suitable for XRD characterization. Spectroscopic and computational studies of this species support a high-spin Fe(III) center antiferromagnetically coupled to a superoxide ligand, similar to that proposed for numerous nonheme iron oxygenases. In addition to the apparent stability of this synthetic Fe-O 2 complex, its ability to engage in a range of stoichiometric and catalytic oxidation processes demonstrates that this iron-phosphinimide system is primed for development in modeling oxidizing bioinorganic intermediates and green oxidation chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Experimental Investigation of Uranium and Iron Condensation from High-Temperature Plasma Conditions

We used a plasma flow reactor (PFR) to generate synthetic fallout nanoparticles from vapor-phase condensation of two different input concentrations of uranium and iron analytes (U/Fe = 1:1 and 1:2). Synthetic fallout from complex chemical matrices (e.g., mixtures of U and Fe) has not been generated in this setup before and allows for the observation of relative condensation and fractionation of nuclear debris. Experiments were conducted under two different temperature histories with variations in particle flow patterns along the PFR. Transmission electron microscopy (TEM) observation and analysis of the nanoparticles revealed variations in speciation of uranium oxides (UO 2 and α-UO 3 ) depending on the competition between flow mixing and oxygen sequestration by iron. A ternary metal oxide, UFeO 4 , was observed in addition to iron oxides (e.g., FeO and Fe 3 O 4 ), which suggests that fallout models should account for chemical speciation of ternary metal oxides (i.e., UFeO 4 ) and their relative condensation behaviors in addition to those of singular metal oxides (e.g., FeO and UO 2 ). X-ray Energy Dispersive Spectroscopy (EDS) elemental maps showed that some particles had Fe-rich cores surrounded by U-rich regions. This suggests that either condensed U oxides coagulate onto molten Fe oxides or that the increase in iron analyte concentration might drive the system toward a higher degree of supersaturation, leading to earlier formation of iron oxide particles and providing an energetically favored pathway for nucleation of uranium oxides around iron oxide particles.

and nuclear chemistry↗
NASA NTRS1989

Ordovician paleosols at Arisaig, Nova Scotia, and the evolution of the atmosphere

A series of Late Ordovician andesite flows are exposed along the coastline near Arisaig, Nova Scotia. Field relationships, textural and mineralogical evidence, and chemical analyses of three interflow units confirm that they are paleosols. The chemical variations observed in these paleosols are quite similar to those of modern soils developed on mafic volcanic rocks. Virtually all of the iron in the paleosols was oxidized and retained during weathering; however, in two of the three paleosols a small fraction of the ferrous iron escaped oxidation and was precipitated near the base of the paleosols. This redistribution of ferrous iron may reflect the presence of nonvascular land plants. The variations in the concentration of the major oxides produced by weathering of the andesites at Arisaig are consistent with the probable lower limit of 0.04 atm for the partial pressure of O2 in the atmosphere during the Late Ordovician. The current data base for Paleozoic and Precambrian paleosols indicates that a significant increase in the PO2/PCO2 ratio in the atmosphere took place about 2.0 x 10(9) years ago; since then the ratio of PO2/PCO2 in the atmosphere has been high enough to oxidize all of the iron in soils developed on igneous rocks.

Non-NASA Center↗
NASA NTRS2003

The Miniaturized Moessbauer Spectrometer MIMOS II of the Athena Payload for the 2003 MER Missions

A first-order requirement of spacecraft missions that land on Mars is instrumentation for in situ mineralogical analysis. Moessbauer Spectroscopy is a powerful tool for quantitative analysis of Fe-bearing materials. The Athena Moessbauer spectrometer MIMOS II on the martian surface will provide: (1) identification of iron-bearing phases (e.g., oxides, silicates, sulfides, sulfates, and carbonates), (2) quantitative measurement of the distribution of iron among its oxidation states (e.g., Fe(2+)/Fe(3+) ratio), and (3) quantitative measurement of the distribution of iron among iron-bearing phases (e.g., the relative proportions of iron in olivine, pyroxene, and magnetite in a basalt) in rocks and soils. Moessbauer data will also be highly complementary with chemical analyses from the APXS and the Mini-TES compositional data. Mars is a particularly good place to do Moessbauer mineralogy because its surface is iron rich (approx. 20% Fe as Fe2O3). Moessbauer spectrometers that are built with backscatter measurement geometry require no sample preparation, a factor important for in situ planetary measurements.

G Klingelhoefer↗
DOE OSTI2022

Reductive removal of pertechnetate and chromate by zero valent iron under variable ionic strength conditions

Radioactive technetium-99 (Tc) present in waste streams and subsurface plumes at legacy nuclear reprocessing sites worldwide poses potential risks to human health and the environment. This research comparatively evaluated efficiency of zero valent iron (ZVI) toward reductive removal of Tc(VII) in presence of Cr(VI) from NaCl and Na 2 SO 4 electrolyte solutions under aerobic conditions. In both electrolytes, anticorrosive Cr(VI) suppressed oxidation of ZVI at elevated concentrations resulting in the delay of initiation of Tc(VII) reduction to Tc(IV)). In the absence of Cr(VI), no such delay was observed in the analogous systems. At low ionic strength, retarded ZVI oxidation inhibited Tc(VII) reduction in part due to the competing thermodynamically more favorable reduction of Cr(VI) to Cr(III); this effect was particularly pronounced in the chloride medium at the ionic strength ? 0.1. Higher ionic strength favored reduction of both Tc(VII) and Cr(VI), which followed a second-order reaction rate in both electrolytes attributed to the more efficient iron oxidation as evident from x-ray diffraction and electron microscopy measurements. Magnetite was the primary iron oxide phase, and its higher fraction in the SO 4 2- solutions facilitated reductive removal of Tc(VII) and Cr(VI). In the Cl- matrix, Cr(VI) promoted further oxidation of magnetite as well as formation of chromite diminishing overall reductive capacity of this system and resulting in less effective removal of Tc(VII) compared to the SO 4 2- solutions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS2017

Chemical and Microstructural Changes in Metallic and Ceramic Materials Exposed to Venusian Surface Conditions

The chemical and microstructural behavior of steels (304, 310, 316, and 1018), nickel-based alloys (beta-NiAl, G30, and 625), gold, coatings (4YSZ, SilcoNert(TradeMark) 1040 (SilcoTek Co.), Dursan(TradeMark) (SilcoTek Co.), and porcelain), and bulk ceramics (alpha-Al2O3, fused quartz, beta-SiC, and alpha-Si3N4) were probed after exposure to supercritical fluid with temperature, pressure, and composition mimicking the Venus lower atmosphere. Exposures were carried out in the Glenn Extreme Environments Rig (GEER) chamber with the Venusian gas mixture (96.5% CO2, 3.5% N2, 30 ppm H2O, 150 ppm SO2, 28 ppm CO, 15 ppm OCS, 3 ppm H2S, 0.5 ppm HCl, and 5 ppb HF) at 92 bar (1330 psi) and 467 C (873 F) for durations of 10 and 42 days. An additional 21-day exposure was done to stainless steel uncoated and coated with SilcoNert(TradeMark) and Dursan(TradeMark). Samples were characterized before and after the experiment by gravimetric analysis, X-ray diffraction, X-ray photoelectron and Auger electron spectroscopies, and cross section electron microscopy analysis. All steels exposed for 10 and 42 days formed double-layered scales consisting mainly of metal (Cr, Fe, Ni) oxides and sulfides showing different chemistry, microstructure, and crystalline phases. The alloys G30 and 625 formed double-layered scales consisting mainly of nickel sulfides. After 10 days, the beta-NiAl exhibited no detectable scale, suggesting only a very thin film was formed. The 304 and 316 stainless steels coated with 4YSZ that were exposed for 10 and 42 days exhibited no significant oxidation. Steel 1018 coated with 4YSZ exhibited a corrosion scale of iron and/or chromium oxide formed at the base of the alloy. The 304 steel coated with porcelain did not exhibit corrosion, although the coating exhibited recession. SilcoNert(TradeMark) exposed for 10 and 42 days exhibited recession, although no oxidation was found to occur at the base of the alloy. Stainless steel 316 coated with Dursan(TradeMark)  exhibited corrosion at the base of the alloy. All ceramics tested showed no clear evidence of reaction. The weight-gain-per-area performance of the materials exposed in the GEER for 10 and 42 days are reported from the lowest to the highest weight gain per area as follows: gold did not exhibit any weight change; nickel-based alloys: beta- NiAl < G30 < 625; steels: 304 < 310 < 316 < 1018; ceramics: considering the experimental uncertainties, no weight change was observed for all ceramics of this work (alpha-Al2O3, Si3N4, SiC, and amorphous SiO2).

Costa, Gustavo C. C.↗