Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Impact Scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

The DEHVILS in the details: Type Ia supernova Hubble residual comparisons and mass step analysis in the near-infrared

Measurements of type Ia supernovae (SNe Ia) in the near-infrared (NIR) have been used both as an alternate path to cosmology compared to optical measurements and as a method of constraining key systematics for the larger optical studies. With the DEHVILS sample, the largest published NIR sample with consistent NIR coverage of maximum light across three NIR bands ( Y, J , and H ), we check three key systematics: (i) the reduction in Hubble residual scatter as compared to the optical, (ii) the measurement of a “mass step” or lack thereof and its implications, and (iii) the ability to distinguish between various dust models by analyzing slopes and correlations between Hubble residuals in the NIR and optical. We produce SN Ia simulations of the DEHVILS sample and find that it is harder to differentiate between various dust models than previously understood. Additionally, we find that fitting with the current SALT3-NIR model does not yield accurate wavelength-dependent stretch-luminosity correlations, and we propose a limited solution for this problem. From the data, we see that (i) the standard deviation of Hubble residual values from NIR bands treated as standard candles are 0.007–0.042 mag smaller than those in the optical, (ii) the NIR mass step is not constrainable with the current sample size of 47 SNe Ia from DEHVILS, and (iii) Hubble residuals in the NIR and optical are correlated in the data. We test a few variations on the number and combinations of filters and data samples, and we observe that none of our findings or conclusions are significantly impacted by these modifications.

Astronomy & Astrophysics↗
DOE OSTI2025

Impact of high-temperature annealing on hafnia-silica composite coatings deposited via ion beam sputtering for high-peak power 1064 nm lasers

The maximum power handling fluence of high-peak and average power laser systems is often limited by the laser damage of the coatings on optical components. Furthermore, these multilayer dielectric coatings are limited in their maximum power handling due to laser-damage-prone defects in the lower optical bandgap, higher optical index material. Some of these defects can be mitigated by thermal annealing to high temperatures, which can greatly reduce the linear absorbative precursors. Typically, hafnia and silica are the materials of choice for high-peak and average power laser systems in the ultraviolet through infrared spectral range; however, hafnia crystalizes readily when annealed at high temperatures. In this study, we prepare composite HfO 2 -SiO 2 coatings by co-sputtering hafnia and silica in an ion beam sputtering system and compare them to pure hafnia-based coatings. We demonstrate that crystallinity in hafnia can be completely suppressed when it is mixed with silica, such as the composite coatings in this study. High reflectors were fabricated and annealed, demonstrating that the multilayer dielectric stacks can survive high-temperature annealing and exhibit an excellent linear absorption of 0.2 +/- 1 ppm at 1064 nm. Short- and long-pulse laser damage was explored, demonstrating the complex relationship between linear absorption and the non-linear absorption which drives pulsed laser damage. These results provide an excellent route to the creation of very low linear absorption optical coatings, which also utilize low scattering materials that are best suited for high-peak and average power applications.

Harthcock, Colin [Lawrence Livermore National Labo↗
DOE OSTI2024

Exploring the impact of Cr-doping on the crystallographic and magnetic structure of Mn 5 Si 3 antiferromagnetic alloy

Here, the role of Cr-doping on the structural and magnetic ground states of Mn 5 Si 3 alloy has been investigated through temperature-dependent neutron powder diffraction (NPD) and X-ray absorption fine structure (XAFS) techniques. All the Cr-doped alloys of nominal composition Mn 5-x Cr x Si 3 (for x = 0.05, 0.1, and 0.2) undergo two first-order magneto-structural phase transitions from hexagonal (space group: P6 3 /mcm) paramagnetic → orthorhombic (space group: Ccmm) collinear antiferromagnetic → orthorhombic (space group: Cc2m) non-collinear antiferromagnetic phase on cooling from room temperature. NPD studies at different constant temperatures indicate that both anti ferromagnetic phases are commensurate in nature and can be represented by q = (0,1,0) magnetic propagation vector for all the Cr-doped alloys. Such doping at the Mn-site results in a significant modification of the non-collinear antiferromagnetic structure (both moment size and orientation) and hence affects the unusual magnetic properties, like inverted hysteresis loop, thermomagnetic irreversibility, etc. The XAFS measurements were performed to interpret the local environment of doped Cr atoms in detail, which is critical for a microscopic understanding of the unusual properties of this class of Cr-doped Mn 5 Si 3 alloys. The analysis confirms the elemental state of Cr in the doped alloys and indicates a high degree of preservation of local crystallographic structure with varying Cr concentration and sample temperature. Doping induces intriguing changes in XAFS patterns, elucidated through different types of scattering mechanisms associated with the central absorbing Cr atom.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

All-Inorganic Halide Perovskites as Potential Thermoelectric Materials: Dynamic Cation off-Centering Induces Ultralow Thermal Conductivity

Halide perovskites are anticipated to impact next generation high performance solar cells because of their extraordinary charge transport and optoelectronic properties. However, their thermal transport behavior has received limited attention. In this work, we studied the thermal transport and thermoelectric properties of the CsSnBr 3–x I x perovskites. We find a strong correlation between lattice dynamics and an ultralow thermal conductivity for series CsSnBr 3–x I x reaching 0.32 Wm –1 K –1 at 550 K. The CsSnBr 3–x I x also possess a decent Seebeck coefficient and controllable electrical transport properties. The crystallography data and theoretical calculations suggest the Cs atom deviates from its ideal cuboctahedral geometry imposed by the perovskite cage and behaves as a heavy atom rattling oscillator. This off-center tendency of Cs, together with the distortion of SnX 6 (X = Br or I) octahedra, produces a highly dynamic and disordered structure in CsSnBr 3–x I x , which gives rise to a very low Debye temperature and phonon velocity. Moreover, the low temperature heat capacity data suggests strong coupling between the low frequency optical phonons and heat carrying acoustical phonons. In conclusion, this induces strong phonon resonance scattering that induces the ultralow lattice thermal conductivity of CsSnBr 3–x I x .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Structurally Frustrated Remeika Phases: Tolerance Factor and Non-Kramers’ Ion Effects

Quantum materials that are found on the verge of structural, magnetic, and electronic instabilities are deep reservoirs for exotic phenomena. Our criteria to study the reported Ln 5 Ru 6 Sn 18 (Ln = Gd, Tb) are guided by the tolerance factor for Remeika phases─a class of intermetallic compounds with the general formula A 3 M 4 X 13 (where A = rare-earth element, M = transition metal, and X = tetrel), which can be viewed as structural analogues of pseudoperovskites (4 × ABX 3 ), with one of the tetrel atoms occupying the A-site. We have grown single crystals, up to 0.5 cm on the largest facet, of Gd 5 Ru 6 Sn 18 (a = 13.8052(12) Å) and Tb 5 Ru 6 Sn 18 (a = 13.7825(9) Å), which we expect to be on the verge of a formation instability. Bulk magnetic, heat capacity, and electrical transport measurements reveal unusual behavior that originates from the trivalent Gd and Tb ions, with deviations from typical metallic behavior and magnetic ordering that is short-range or disrupted in some other way. Furthermore, to better understand these phenomena, single-crystal neutron diffraction is investigated, which reveals short-range correlations among the partially occupied Tb and Sn sublattices, with 3D-ΔPDF analysis supporting direction-dependent local order. Taken together, these measurements show the utility of using tolerance factors in identifying materials that are likely to exhibit complex phenomena and uncover environments where a formation instability may strongly impact emergent bulk magnetic and electronic phenomena.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electric dipole excitations near the neutron separation energies in 96 Mo

Electric dipole strength near the neutron separation energy significantly impacts nuclear structure properties and astrophysical scenarios. These excitations are complex in nature and may involve the so-called pygmy dipole resonance (PDR). Transition densities play a crucial role in understanding the nature of nuclear excited states, including collective excitations, as well as in constructing transition potentials in DWBA or coupled-channels equations. In this work, we focus on electric dipole excitations in spherical molybdenum isotopes, particularly 96 Mo, employing fully consistent Hartree-Fock-Bogoliubov (HFB) and Quasiparticle Random Phase Approximation (QRPA) methods. We analyze the dipole strength near the neutron separation energy, which represents the threshold for neutron capture processes, and examine the isospin characteristics of PDR states through transition density calculations. Examination of proton and neutron transition densities reveals distinctive features of each dipole state, indicating their isoscalar and isovector nature. We observe that the primary component in the enhanced low-energy region exhibits isovector character. The PDR displays a mixture of isoscalar and isovector nature, distinguishing it from the isovector giant dipole resonance (IVGDR). These findings lay the groundwork for future investigations into the role of transition densities in reaction models and for their application to inelastic scattering calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Where, when, and why: Occurrence of fast-pairwise collective neutrino oscillation in three-dimensional core-collapse supernova models

Fast-pairwise collective neutrino oscillation represents a key uncertainty in the theory of core-collapse supernova (CCSN). Despite the potentially significant impact on CCSN dynamics, it is usually neglected in numerical models of CCSN because of the formidable technical difficulties of self-consistently incorporating this physics. In this paper, we investigate the prospects for the occurrence of fast flavor conversion by diagnosing electron neutrino lepton number (ELN) crossing in more than a dozen state-of-the-art three-dimensional CCSN models. ELN crossings provide a necessary condition for triggering flavor conversion. Although only zeroth and first angular moments are available from the simulations, our new method enables us to look into the angular distributions of neutrinos in momentum space and provide accurate insight into ELN crossings. Our analysis suggests that fast flavor conversion generally occurs in the postshock region of CCSNe, and that explosive models provide more favorable conditions for the flavor conversion than failed CCSNe. Here we also find that there are both common and progenitor-dependent characteristics. Classifying ELN crossings into two types, we analyze the generation mechanism of each case by scrutinizing the neutrino radiation field and matter interactions. We find key ingredients of CCSN dynamics driving the ELN crossings: proto-neutron star convection, asymmetric neutrino emission, neutrino absorptions, and scatterings. This study suggests that we need to accommodate fast flavor conversions in realistic CCSN models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Equation of State and Spin Crossover of (Al, Fe)–Phase H

The transport of hydrogen into Earth's deep interior may have an impact on lower mantle dynamics as well as on the seismic signature of subducted material. Due to the stability of the hydrous phases δ-AlOOH (delta phase), MgSiO 2 (OH) 2 (phase H), and ε-FeOOH at high temperatures and pressures, their solid solutions may transport significant amounts of hydrogen as deep as the core-mantle boundary. Here we have constrained the equation of state, including the effects of a spin crossover in the Fe 3+ atoms, of (Al, Fe)-phase H: Al 0.84 Fe 3+ 0.07 Mg 0.02 Si 0.06 OOH, using powder X-ray diffraction measurements to 125 GPa, supported by synchrotron Mössbauer spectroscopy measurements on (Al, Fe)-phase H and δ-(Al, Fe)OOH. The changes in spin state of Fe 3+ in (Al, Fe)-phase H results in a significant decrease in bulk sound velocity and occurs over a different pressure range (48–62 GPa) compared with δ-(Al, Fe)OOH (32–40 GPa). Changes in axial compressibilities indicate a decrease in the compressibility of hydrogen bonds in (Al, Fe)-phase H near 30 GPa, which may be associated with hydrogen bond symmetrization. The formation of (Al, Fe)-phase H in subducted oceanic crust may contribute to scattering of seismic waves in the mid-lower mantle (~1,100–1,550 km). Accumulation of 1–4 wt.% (Al, Fe)-phase H could reproduce some of the seismic signatures of large, low seismic-velocity provinces. Our results suggest that changes in the electronic structure of phases in the (δ-AlOOH)-(MgSiO 2 (OH) 2 )-(ε-FeOOH) solid solution are sensitive to composition and that the presence of these phases in subducted oceanic crust could be seismically detectable throughout the lower mantle.

58 GEOSCIENCES↗
DOE OSTI2023

Recent H - ion source research and development at the Oak Ridge National Laboratory

The U.S. Spallation Neutron Source (SNS) is a state-of-the-art neutron scattering facility delivering the world's most intense pulsed neutron beams to a wide array of instruments which are used to conduct investigations in many fields of science and engineering. Neutrons are produced from spallation of liquid Hg by bombardment of short (~1 μs), intense (~35 A) pulses of protons delivered at 60 Hz by a storage ring which is fed by a high-intensity, ~1 GeV H - LINAC. This facility has operated almost continuously since 2006, with ion source performance increasing over those years, and currently providing 50–60 mA of H - ions with a duty-factor of 6% for maintenance-free runs of several months with near 100% availability. Ion source research and development at ORNL has played a key role in enabling and supporting this success: this report provides an update on some of the ongoing ion source research and development efforts which have been undertaken since the previous Negative Ion Beams and Sources (NIBS) conference in 2020. These include significant improvements to H - beam current by extraction from a larger source outlet aperture and improvements to the electron dumping system which should eliminate the gradual loss of electrode voltage over the course of a run which has occasionally impacted SNS operations. Improvement and simplification of the plasma ignition system for the external antenna ion source, a long-standing problem, was also realized. Lastly, RF coupling efficiency was measured for both the SNS internal and external antenna ion sources.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Nonlinear X-ray Optics

Novel X-ray free-electron lasers (XFELs) are capable of producing radiation with unprecedented properties. Specifically, their ultrashort coherent X-ray pulses can generate extreme peak intensities where ordinary rules of light-matter interaction may no longer apply, and nonlinear processes start to become important. XFELs have made it possible to observe some of the most important coherent non-sequential nonlinearities, including X-ray-optical sum frequency generation (SFG), X-ray second harmonic generation (XSHG), two-photon absorption (TPA) and nonlinear two-photon Compton scattering (2PCS). In particular, the 2PCS experiment has led to unexpected results, namely the observation of a substantial anomalous red shift in the energy of photons generated by nonlinear two-photon X-ray Compton scattering in beryllium. The energy shift is in addition to the predicted nonlinear Compton shift and was neither expected from extrapolations from linear X-ray interactions nor from nonlinear effects at optical wavelengths. Our results suggest a novel nonlinear scattering mechanism that can only be observed at high fields at X-ray wavelengths, where the photon energy is a significant fraction of the electron rest mass (and thus a significant momentum transfer to the electron occurs during the scattering) and where the interaction is not dominated by the quiver motion of the electron in the field (ponderomotive potential) as is usually the case at longer (optical) wavelengths. The goal of this research project was the investigation of fundamental nonlinear X-ray-matter interactions. As these processes are typically weak, part of this research is the exploration of more efficient nonlinear X-ray processes by studying novel mechanisms including solid-state effects, the assistance of optical radiation and novel phase-matching techniques. These experiments require extremely large X-ray field strengths, such as produced by XFELs. Nonlinear X-ray effects can lead to important applications in many research fields. For example, it could lead to instantaneous plasma diagnostics for materials in extreme conditions, as a method for combining atomic-scale structural sensitivity with chemical specificity, or as a probe of electron dynamics in solids on the attosecond (1 as = 10 -18 s) time- and Ångstrom (10 -10 m) length scales. In addition, a detailed understanding of nonlinear X-ray matter interactions is crucial for understanding and extending the limits of structural determination at high intensity such as in serial femto-crystallography. The results could have a profound impact on advanced XFEL light sources such as the LCLS-II.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Amphiphilic Block Copolymers for Flocculation and Hydrophobization of Legacy Waste Suspensions in Flotation Driven Dewatering Operations - 20162

Flotation has been effectively demonstrated as a low footprint, high efficiency separation process when utilising simple anionic surface modifying agents such as sodium dodecyl sulphate (SDS). These agents increase hydrophobicity to remove suspended cationic surface charged particulates such as Mg(OH){sub 2} from waste suspensions similar to those at British nuclear fuel management sites- where corrosion processes have degraded fuel cladding. The technology is advantageous as it could effectively be retrofitted into existing waste management facilities at nuclear waste management sites such Sellafield and Hanford as the simplicity (no moving parts) and size of this technology coupled with low cost of construction could be rapidly deployed to aid in risk and hazard reduction decommissioning operations with minimum impact to secondary waste generation. Previously, sodium dodecyl sulphate has been deployed as a collector agent to increase the hydrophobicity of Mg(OH){sub 2} suspended particles, achieving a maximum particulate extraction percentage of 93%. To achieve further particulate extraction, flotation performance has been determined to be a function of the hydrodynamic limitations extracting fine material (>20 μm). Fine particulates have been shown in the minerals industry to have an inability to overcome slipstreams created from rising bubbles in flotation cells, likely due to the low mass and thus momentum of the colloidal material, preventing interaction between the hydrophobized particles and air-water interfaces (bubbles). To combat this mass transfer resistance poly(acrylic acid)-block-poly(n-butyl acrylate) amphiphilic diblock copolymers were synthesised via reversible addition-fragmentation chain-transfer (RAFT) polymerisation. The anticipated mode of action of these polymers involves the hydrophilic poly(acrylic acid) block polymer acting as a flocculation agent to increase the mass of the aggregates, and the hydrophobic poly(n-butyl acrylate) modifies the hydrophobicity of the resulting flocs. The concentration of this polymer (termed a macro-collector) was varied and the change in particle size distribution of the particulate suspension was analysed using static light scattering. The flotation performance was then characterised by several methods including percentage particulate recovery, volume reduction factor and residual bulk particulate concentration. This was then benchmarked against the traditional surfactant collector agent SDS. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Optical Durability of Contemporary PV Encapsulants Through Artificial UV Weathering

Modern c-Si photovoltaic (PV) cells provide high performance but can be vulnerable to ultraviolet light induced degradation (UV-ID). Encapsulants, if chosen correctly, can mitigate UV-ID of the PV cell. Here, we explore performance and durability of 14 commercial encapsulant materials before, during, and after irradiation with UV-containing light. Materials include contemporary, polymer-based encapsulants with a base polymer of poly (ethylene co-vinyl acetate) (EVA), polyethylene-..alpha..-olefin (POE), or their composite (EPE). Polymers contain additives that induce UV-blocking, UV-transmitting, or UV-downshifting properties. We use test coupons to study degradation in a chamber held at 65 degrees C under a xenon light source for up to 4000 h of exposure, corresponding to a cumulative dose of 11.5 MJ/m2 at 340 nm. We examine optical properties including spectral transmittance, yellowness index and spectral fluorescence, considering changes to both the encapsulant and glass as a function of weathering time. Degradation modes identified include discoloration, changes to UV cutoff wavelength, changes to solar-weighted transmittance, and most notably a change to the UV-managing properties of some additives. We propose the use of solar-weighted transmittance in the 300- to 400-nm range to better track performance changes in the UV region associated with the UV-related additive. This is especially relevant for the emerging class of UV-downshifting additives, as metrics like UV-cutoff can understate the degree of degradation or change in these materials. While most encapsulants show very little change after weathering, some show significant changes that directly impact how much UV light would reach an underlying cell.

14 SOLAR ENERGY↗
DOE OSTI2024

Fundamental data for modeling electron-induced processes in plasma remediation of perfluoroalkyl substances

Plasma treatment of per- and polyfluoroalkyl substances (PFAS) contaminated water is a potentially energy efficient remediation method. In this treatment, an atmospheric pressure plasma interacts with surface-resident PFAS molecules. Developing a reaction mechanism and modeling of plasma–PFAS interactions requires fundamental data for electron–molecule reactions. In this paper, we present results of electron scattering calculations, potential energy landscapes and their implications for plasma modelling of a dielectric barrier discharge in PFAS contaminated gases, a first step towards modelling of plasma–water–PFAS intereactions. It is found that the plasma degradation of PFAS is dominated by dissociative electron attachment with the importance of other contributing processes varying depending on the molecule. All molecules posses a large number of shape resonances – transient negative ion states – from near-threshold up to ionization threshold. These states lie in the region of the most probable electron energies in the plasma (4–5 eV) and consequently are expected to further enhance the fragmentation dynamics in both dissociative attachment and dissociative excitation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

BCARS Simulated Phantom Dataset for Evaluation of Processing Pipelines

Broadband coherent anti-Stokes Raman scattering (BCARS) microscopy is a powerful label-free biological imaging technique, but the raw signal requires careful processing. The vibrationally resonant (Raman) fingerprint signal is usually small compared with instrumental noise sources and the nonresonant background (NRB) inherent in the BCARS signal. Fortunately, the NRB exhibits a systematic phase relationship with the coherent Raman response, acting as a heterodyne amplifier for the weak fingerprint signal. Due to this heterodyne effect, the Raman response can be recovered quantitatively and invariantly across different instruments, provided the NRB shape is known. Even with heterodyne amplification, the amplitudes of fingerprint signal components are often comparable to system noise. Singular value decomposition (SVD), which utilizes spatial information, is often employed for additional noise filtering. Consequently, finding optimal processing parameters to properly distinguish the NRB and Raman responses and suppress noise in the complex BCARS signal requires a reference system that realistically represents the spectral and spatial properties of BCARS signals obtained from biological samples. We present a digital tissue phantom that meets these criteria as a tool for testing candidate signal processing pipelines. The digital phantom is generated with simulated hyperspectral Raman images having system-specific noise and background characteristics. Here, we analyze phantom datasets with differing background and signal-to-noise conditions to evaluate their impact on the performance of multiple signal processing pipelines. Specifically, we investigate the application of a Butterworth filter-based routine to directly estimate the NRB from the BCARS signal. Additionally, we evaluate a Lorentzian wavelet transform as an alternative to the Hilbert transform for extracting the Raman spectrum from the BCARS signal. While we demonstrate this phantom for BCARS, it can be used for any spectroscopic Raman imaging approach.

Dixon, Jessica Z. [Georgia Institute of Technology↗
DOE OSTI2025

Impact of Hydroxyl Functionalization and Unsaturation on Linear Poly(ethylene- co -vinyl alcohol)

Functionalization of C═C in unsaturated polyolefins by hydroboration/oxidation successfully generates linear poly(ethylene-co-vinyl alcohol) (LEVOH) polymers. This postpolymerization modification expands upon previously reported chemistry to control the extent of functionalization through reagent stoichiometry. Partial functionalization (24–92% of C═C) of polycyclooctene produces materials with both C═C in the backbone and pendant OH and subsequent hydrogenation generate a LEVOH. We explore the thermal, structural, surface, and adhesive properties of these LEVOH and the partially unsaturated intermediate and find they are impacted by both the extent of OH incorporation and saturation. The presence of C═C significantly reduces the melting temperature and crystallinity while increasing surface polarity and adhesive strength compared with saturated polymers at equivalent functionalization. Furthermore, this investigation demonstrates linear analogs of EVOH with a wide range of properties tuned by extent of hydroxylation and presence of unsaturation.

Crystal structure↗
DOE OSTI2024

Impact of the MARATHON data on F 2⁢n⁡ /F 2⁢p and off-shell effects in light nuclei

The neutron structure function, F 2⁢n⁡ , has historically been extracted from measurements of the deuteron structure function, which is limited by our understanding of the nuclear effects on the bound proton and neutron. The MARATHON Collaboration recently extracted F 2⁢n⁡ from the comparison of 3 H and 3 He targets, where the nuclear effects are larger but nearly identical, yielding a precise extraction of F 2⁢n⁡ /F 2⁢p . Here, to ensure that this comparison is not biased by the specific model of nuclear effects used by MARATHON, we examine a range of models of the nuclear effects to obtain a more conservative, but more model-independent, extraction of F 2⁢n⁡ /F 2⁢p for comparison with deuteron extractions. Even with this approach, the results are precise enough to compare to deuteron extractions, providing new constraints on the nuclear effects in the deuteron and indicating the need for larger nuclear corrections than those included in most models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Characterization of uncertainties in electron-argon collision cross sections

Abstract The predictive capability of a plasma discharge model depends on accurate representations of electron-impact collision cross sections, which determine the corresponding reaction rates and electron transport properties. The values of cross sections can be known only approximately either through experiments or simulations and are thus subject to uncertainties. Quantifying the uncertainties in plasma simulations allows us to assess the reliability of simulations and to provide a basis for interpreting discrepancies between simulations and experiments. For such uncertainty quantification of plasma simulations, it is essential to quantify the uncertainties of the underlying cross sections. Although much effort has been committed to calibrate the cross section values, their uncertainties are not well investigated. We characterize uncertainties in electron-argon atom collision cross sections using a Bayesian framework. Six collision processes—elastic momentum transfer, ionization, and four excitations—are characterized with semi-empirical models, which effectively capture the features important to the macroscopic properties of the plasma. A probability model for the uncertain parameters of these semi-empirical models is developed. Specifically, a Gaussian-process likelihood model is proposed to capture discrepancies among data sets, as well as the model-form inadequacies of the semi-empirical models. Two other likelihood models are compared with the proposed Gaussian-process model, to illustrate the importance of the choice of the likelihood model. The cross section models are calibrated using the electron-beam experiments and ab-inito quantum simulations. The resulting calibrated uncertainties capture well the scattering among the data sets. The calibrated cross section models are further validated against swarm-parameter experiments and zero-dimensional Boltzmann equation simulations of widely used cross section datasets.

Chung, Seung Whan (ORCID:0000000302501549)↗