Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ITALY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Contributions of irrigation modeling, soil moisture and snow data assimilation to high-resolution water budget estimates over the Po basin: progress towards digital replicas

High-resolution water budget estimates benefit from modeling of human water management and satellite data assimilation (DA) in river basins with a large human footprint. Utilizing the Noah-MP land surface model with dynamic vegetation growth and river routing, in combination with an irrigation module, Sentinel-1 backscatter and snow depth retrievals, we produce a set of 0.7-km2 water budget estimates of the Po river basin (Italy) for 2015–2023. The results demonstrate that irrigation modeling improves the seasonal soil moisture variation and summer streamflow at all gauges in the valley after withdrawal of irrigation water from the streamflow in postprocessing (12% error reduction relative to observed low summer streamflow), even if the basin-wide irrigation amount is underestimated. Sentinel-1 backscatter DA for soil moisture updating strongly interacts with irrigation modeling: when both are activated, the soil moisture updates are limited, and the simulated irrigation amounts are reduced. Backscatter DA systematically reduces soil moisture in the spring, which improves downstream spring streamflow. Assimilating Sentinel-1 snow depth retrievals over the surrounding Alps and Apennines further improves spring streamflow in a complementary way (2% error reduction relative to observed high spring streamflow). Despite the seasonal improvements, irrigation modeling and Sentinel-1 backscatter DA cannot significantly improve short-term or interannual variations in soil moisture, irrigation modeling causes a systematically prolonged high vegetation productivity, and snow depth DA only impacts the deep snowpacks. This study helps advancing the design of digital water budget replicas for river basins.

Gabrielle J M De Lannoy↗

SIMULATION OF THE ICELAND VOLCANIC ERUPTION OF APRIL 2010 USING THE ENSEMBLE SYSTEM

The Eyjafjallajokull volcanic eruption in Iceland in April 2010 disrupted transportation in Europe which ultimately affected travel plans for many on a global basis. The Volcanic Ash Advisory Centre (VAAC) is responsible for providing guidance to the aviation industry of the transport of volcanic ash clouds. There are nine such centers located globally, and the London branch (headed by the United Kingdom Meteorological Office, or UKMet) was responsible for modeling the Iceland volcano. The guidance provided by the VAAC created some controversy due to the burdensome travel restrictions and uncertainty involved in the prediction of ash transport. The Iceland volcanic eruption provides a useful exercise of the European ENSEMBLE program, coordinated by the Joint Research Centre (JRC) in Ispra, Italy. ENSEMBLE, a decision support system for emergency response, uses transport model results from a variety of countries in an effort to better understand the uncertainty involved with a given accident scenario. Model results in the form of airborne concentration and surface deposition are required from each member of the ensemble in a prescribed format that may then be uploaded to a website for manipulation. The Savannah River National Laboratory (SRNL) is the lone regular United States participant throughout the 10-year existence of ENSEMBLE. For the Iceland volcano, four separate source term estimates have been provided to ENSEMBLE participants. This paper focuses only on one of those source terms. The SRNL results in relation to other modeling agency results along with useful information obtained using an ensemble of transport results will be discussed.

99 GENERAL AND MISCELLANEOUS↗

Preliminary Results of 3D-DDTC Pixel Detectors for the ATLAS Upgrade

3D Silicon sensors fabricated at FBK-irst with the Double-side Double Type Column (DDTC) approach and columnar electrodes only partially etched through p-type substrates were tested in laboratory and in a 1.35 Tesla magnetic field with a 180 GeV pion beam at CERN SPS. The substrate thickness of the sensors is about 200 {mu}m, and different column depths are available, with overlaps between junction columns (etched from the front side) and ohmic columns (etched from the back side) in the range from 110 {mu}m to 150 {mu}m. The devices under test were bump bonded to the ATLAS Pixel readout chip (FEI3) at SELEX SI (Rome, Italy). We report leakage current and noise measurements, results of functional tests with Am{sup 241} {gamma}-ray sources, charge collection tests with Sr90 {beta}-source and an overview of preliminary results from the CERN beam test.

Instrumentation,PHYS↗

Synchrotron Light Options at Super-B

Super-B is a planned asymmetric high luminosity e{sup +}e{sup -} collider at the {Upsilon}(4S) resonance as PEP-II and KEKB, to be built in Italy. The Super-B High (HER, 7 GeV) and Low (LER, 4 GeV) Energy beams characteristics are comparable to NSLS-II and other state of the art synchrotron light sources. This suggests the use of this facility, either parasitically or in dedicated runs, as light source. In this paper we compare the characteristics of the synchrotron light generated at Super-B with existing, in construction and proposed facilities. We investigate different schemes to incorporate the generation of synchrotron radiation in the collider lattice design and look at different beam line layouts for users. In the past high energy particle colliders were designed to collide as many particle as possible. This was done by maximizing the beam current, using relative large emittances and squeezing the beam at the interaction point. During the operation of PEP II the limits of both raising the beam currents and squeezing the beam were experienced. Therefore the optics was modified to lower emittance. The successful test of the 'large Piwinski angle' and crab waist scheme, with extremely low design emittances, at the DAPHNE collider at Frascati made it the design choice for Super-B. Both HER and LER have been designed to meet these requirements and the design parameters relevant to our study, are shown in Table 1. As comparison the design parameters from NSLS II and other state of the art synchrotron light sources have been added to this table. From these parameters it is obvious that synchrotron radiation generated from both HER and LER is comparable to this last generation sources.

43 PARTICLE ACCELERATORS↗

The SuperB Project: Accelerator Status and R&D

The SuperB collider project has been recently approved by the Italian Government as part of the National Research Plan. SuperB is a high luminosity (10{sup 36} cm{sup -2} s{sup -1}) asymmetric e{sup +}e{sup -} collider at the {Upsilon}(4S) energy. The design is based on a 'large Piwinski angle and Crab Waist' scheme already successfully tested at the DAPHNE {Phi}-Factory in Frascati, Italy. The project combines the challenges of high luminosity colliders and state-of-the-art synchrotron light sources, such as two beams (e{sup +} at 6.7, HER, and e{sup -} at 4.2 GeV, LER) with extremely low emittances and small beam sizes at the Interaction Point. As unique features, the electron beam will be longitudinally polarized at the IP and the rings will be able to ramp down to collide at the {tau}/charm energy threshold with a luminosity of 10{sup 35} cm{sup -2} s{sup -1}. The relatively low beam currents (about 2 A) will allow for low running (power) costs compared to similar machines. The insertion of beam lines for synchrotron radiation (SR) users is the latest feature included in the design. The lattice has been recently modified to accommodate insertion devices for X-rays production.

43 PARTICLE ACCELERATORS↗

Advances in the Design of the SuperB Final Doublet

SuperB is an asymmetric energy e{sup +}e{sup -} collider operating at the {Upsilon}(4S) peak with a design peak luminosity of 10{sup 36} Hz/cm{sup 2} to be built in Italy in the very near future. The design luminosity is almost a factor hundred higher than that of the present generation comparable facilities. To get the design luminosity a novel collision scheme, the so called 'large Piwinski angle with crab waist', has been designed. The scheme requires a short focus final doublet to reduce the vertical beta function down to {beta}*{sub y} = 0.2mm at the interaction point (IP). The final doublet will be composed by a set of permanent and superconducting (SC) quadrupoles. The SC quadrupole doublets QD0/QF1 will be placed as close to the IP as possible. This layout is critical because the space available for the doublets is very small. An advanced design of the quadrupole has been developed, based on the so-called helical coil concept. The paper discusses the design concept, the construction and the results of test of a model of the superconducting quadrupole based on NbTi technology. Future developments are also presented.

43 PARTICLE ACCELERATORS↗

3D-FBK Pixel Sensors: Recent Beam Tests Results with Irradiated Devices

The Pixel Detector is the innermost part of the ATLAS experiment tracking device at the Large Hadron Collider, and plays a key role in the reconstruction of the primary vertices from the collisions and secondary vertices produced by short-lived particles. To cope with the high level of radiation produced during the collider operation, it is planned to add to the present three layers of silicon pixel sensors which constitute the Pixel Detector, an additional layer (Insertable B-Layer, or IBL) of sensors. 3D silicon sensors are one of the technologies which are under study for the IBL. 3D silicon technology is an innovative combination of very-large-scale integration and Micro-Electro-Mechanical-Systems where electrodes are fabricated inside the silicon bulk instead of being implanted on the wafer surfaces. 3D sensors, with electrodes fully or partially penetrating the silicon substrate, are currently fabricated at different processing facilities in Europe and USA. This paper reports on the 2010 June beam test results for irradiated 3D devices produced at FBK (Trento, Italy). The performance of these devices, all bump-bonded with the ATLAS pixel FE-I3 read-out chip, is compared to that observed before irradiation in a previous beam test.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The European Safeguards Research and Development Association Addresses Safeguards and Nonproliferation

The renaissance of efforts to expand the use of nuclear energy requires the parallel development of a renewed and more sophisticated work force. Growth in the nuclear sector with high standard of safety, safeguards and security requires skilled staff for design, operations, inspections etc. High-quality nuclear technology educational programs are diminished from past years, and the ability of universities to attract students and to meet future staffing requirements of the nuclear industry is becoming seriously compromised. Thus, education and training in nuclear engineering and sciences is one of the cornerstones for the nuclear sector. Teaching in the nuclear field still seems strongly influenced by national history but it is time to strengthen resources and collaborate. Moreover with the current nuclear security threats it becomes critical that nuclear technology experts master the basic principles not only of safety, but also of nuclear safeguards, nonproliferation and nuclear security. In Europe the European Nuclear Education Network (ENEN) Association has established the certificate 'European Master of Science in Nuclear Engineering (EMSNE)' as the classic nuclear engineering program covering reactor operation and nuclear safety. However, it does not include courses on nonproliferation, safeguards, or dual-use technologies. The lack of education in nuclear safeguards was tackled by the European Safeguards Research and Development Association (ESARDA), through development and implementation of safeguards course modules. Since 2005 the ESARDA Working Group, called the Training and Knowledge Management Working Group, (TKMWG) has worked with the Joint Research Centre (JRC) in Ispra, Italy to organize a Nuclear Safeguards and Nonproliferation course. This five-day course is held each spring at the JRC, and continues to show increasing interest as evidenced by the positive responses of international lecturers and students. The standard set of lectures covers a broad range of subjects, including nuclear material accountancy principles, legal definitions and the regulatory base and inspection tools and techniques. This 60% core part is given by representatives from regulatory bodies (The International Atomic Energy Agency (IAEA), Institute for Radiological Protection and Nuclear Safety, Directorate General for Nuclear Energy and Transport), industry (AREVA, British Nuclear Group), and research (Stockholm University, Hamburg University, Joint Research Centre-Institute of Transuranic Elements, and Joint Research Centre-Institute for the Protection of the Citizen). The remaining part is completed with topical lectures addressed by invited lecturers, such as from Pacific Northwest National Laboratory and the IAEA addressing topics of physical protection, illicit trafficking, the Iraq case study, exercises, including satellite imagery interpretation etc. With this structure of a stable core plus a variable set of invited lectures, the course will remain sustainable and up-to-date. A syllabus provides the students a homogeneous set of information material in nuclear safeguards and nonproliferation matters at the European and international level. In this way, the ESARDA TKMWG aims to contribute to a two-fold scientific-technical and political-juridical education and training.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Low Emittance Tuning Studies for SuperB

SuperB[1] is an international project for an asymmetric 2 rings collider at the B mesons cm energy to be built in the Rome area in Italy. The two rings will have very small beam sizes at the Interaction Point and very small emittances, similar to the Linear Collider Damping Rings ones. In particular, the ultra low vertical emittances, 7 pm in the LER and 4 pm in the HER, need a careful study of the misalignment errors effects on the machine performances. Studies on the closed orbit, vertical dispersion and coupling corrections have been carried out in order to specify the maximum allowed errors and to provide a procedure for emittance tuning. A new tool which combines MADX and Matlab routines has been developed, allowing for both corrections and tuning. Results of these studies are presented.

43 PARTICLE ACCELERATORS↗

BLV-2011 Workshop, September 22-24, 2011. Final Report

The 3rd International 3-days Workshop "Baryon and Lepton Number Violations: BLV-2011" took place at Gatlinburg, TN for September 22-24, 2011. Workshop was organized by the International Organizing Committee and had received advice from the International Program Advisory Committee (see Appendix 1). Workshop was co-chaired by Pavel Fileviez Perez (University of Wisconsin) for theory and Yuri Kamyshkov (University of Tennessee) for experiment and local organization. Workshop was supported and sponsored by the University of Tennessee, Indiana University, North Carolina State University together with TUNL, and by the HEP office of the Department of Energy. DOE financial support in this sponsoring grant was $8,000; that was 23% of the overall budget of the Workshop. Remaining 77% were provided by the sponsoring Universities. Workshop sponsors including DOE are shown on the Workshop webpage. There were 90 workshop participants with 52 from US and remaining from Bosnia/Herzegovina (1), Brazil (1), China (1), Columbia (1), France (1), Germany (10), Italy (9), Japan (4), Russian Federation (3), Slovenia (2), Spain (4), and Switzerland (1). Among Workshop participants there were 17 postdocs and young researchers and 11 graduate students. Total 67 talks and 14 posters were presented at Workshop during 3 days of sessions. Appendix 2 shows the list of talks and posters. Main topic of the Workshop was Baryon and Lepton number violation that has become a vital part of the current discussions of the physics beyond the Standard Model (SM), specifically in connection with understanding the nature of neutrinos, origin of matter in universe, as well as possible Grand Unification of matter and forces. The goal of the Workshop was to have a focused comprehensive discussion of the Baryon (B) and Lepton (L) number violating processes, and possible new physics combining violation of both, including (B-L) violation, as a probe of unification, baryo- and lepto-genesis, Left-Right symmetry restoration, matter-antimatter asymmetry, sterile matter, mirror matter, dark matter, low-scale gravity, etc. Related experimental observations to these physics aspects included searches for Majorana neutrinos (2βΟν decays), proton decays, neutron-antineutron oscillations, μe transitions, mirror and sterile matter transformations, and possible other new phenomena that can be seen at LHC and future colliders. Combination of theoretical and experimental discussions at the Workshop was most stimulating for germinating of new theoretical ideas and promoting new experimental efforts in particle physics. As one of new developments stemmed from this Workshop was an idea of performing new neutron-antineutron transformation search at the Project X accelerator to be built at Fermilab. BLV2011 Workshop website: http://www.phys.utk.edu/BLV2011/ contains all the talks delivered at this Workshop. Agenda of the Workshop can be found in Appendix 2 to this report. During the Workshop all presentation talks were available at the web in parallel with the talks. This made the discussions of the new ideas and results at the meeting more prompt and efficient. Previous Workshops on Baryon and Lepton Number Violation search in 2007 at LBL and 2009 at the University of Wisconsin were organized essentially by the same initiative group of people as this Workshop. We are observing increased interest in the community to this physics topic. Next BLV-2013 Workshop now at bi-annual basis is being organized at the Max Plank Institute at Heidelberg by Pavel Fileviez Perez.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Sensitivity of CUORE to Neutrinoless Double-Beta Decay

In this paper, we study the sensitivity of CUORE, a bolometric double-beta decay experiment under construction at the Laboratori Nazionali del Gran Sasso in Italy. Two approaches to the computation of experimental sensitivity are discussed and compared, and the formulas and parameters used in the sensitivity estimates are provided. Assuming a background rate of 10{sup -2} cts/(keV kg y), we find that, after 5 years of live time, CUORE will have a 1 {sigma} sensitivity to the neutrinoless double-beta decay half-life of {caret T{sup 0{nu}}{sub 1/2}}(1{sigma} ) = 1.6x 10{sup 26} y and thus a potential to probe the effective Majorana neutrino mass down to 41-95 meV; the sensitivity at 1.64{sigma} , which corresponds to 90% C.L., will be {caret T{sup 0{nu}}{sub 1/2}(1.64{sigma} }) = 9.5x10{sup 25} y. This range is compared with the claim of observation of neutrinoless double-beta decay in {sup 76}Ge and the preferred range in the neutrino mass parameter space from oscillation results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Active-Interrogation Measurements of Induced-Fission Neutrons from Low-Enriched Uranium

Protection and control of nuclear fuels is paramount for nuclear security and safeguards; therefore, it is important to develop fast and robust controlling mechanisms to ensure the safety of nuclear fuels. Through both passive- and active-interrogation methods we can use fast-neutron detection to perform real-time measurements of fission neutrons for process monitoring. Active interrogation allows us to use different ranges of incident neutron energy to probe for different isotopes of uranium. With fast-neutron detectors, such as organic liquid scintillation detectors, we can detect the induced-fission neutrons and photons and work towards quantifying a sample’s mass and enrichment. Using MCNPX-PoliMi, a system was designed to measure induced-fission neutrons from U-235 and U-238. Measurements were then performed in the summer of 2010 at the Joint Research Centre in Ispra, Italy. Fissions were induced with an associated particle D-T generator and an isotopic Am-Li source. The fission neutrons, as well as neutrons from (n, 2n) and (n, 3n) reactions, were measured with five 5” by 5” EJ-309 organic liquid scintillators. The D-T neutron generator was available as part of a measurement campaign in place by Padova University. The measurement and data-acquisition systems were developed at the University of Michigan utilizing a CAEN V1720 digitizer and pulse-shape discrimination algorithms to differentiate neutron and photon detections. Low-enriched uranium samples of varying mass and enrichment were interrogated. Acquired time-of-flight curves and cross-correlation curves are currently analyzed to draw relationships between detected neutrons and sample mass and enrichment. In the full paper, the promise of active-interrogation measurements and fast-neutron detection will be assessed through the example of this proof-of-concept measurement campaign. Additionally, MCNPX-PoliMi simulation results will be compared to the measured data to validate the MCNPX-PoliMi code when used for active-interrogation simulations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

R&D progress in SRF surface preparation with centrifugal barrel polishing (cbp) for both Nb and Cu

Centrifugal Barrel polishing (CBP) is becoming a common R&D tool for SRF cavity preparation around the world. During the CBP process a cylindrically symmetric SRF cavity is filled with relatively cheap and environmentally friendly abrasive and sealed. The cavity is then spun around a cylindrically symmetric axis at high speeds uniformly conditioning the inner surface. This uniformity is especially relevant for SRF application because many times a single manufacturing defects limits cavity?s performance well below it?s theoretical limit. In addition CBP has created surfaces with roughness?s on the order of 10?s of nm which create a unique surface for wet chemistry or thin film deposition. CBP is now being utilized at Jefferson Laboratory, Fermi Laboratory and Cornell University in the US, Deutsches Elektronen-Synchrotron in Germany, Laboratori Nazionali di Legnaro in Italy, and Raja Ramanna Centre for Advanced Technology in India. In this talk we will present current CBP research from each lab including equipment, baseline recipes, cavity removal rates and subsequent cryogenic cavity tests on niobium as well as copper cavities where available.

Palczewski, Ari↗

A Monte Carlo Analysis of Weight Data from UF 6 Cylinder Feed and Withdrawal Stations

As the number of nuclear facilities handling uranium hexafluoride (UF 6 ) cylinders (e.g., UF 6 production, enrichment, and fuel fabrication) increase in number and throughput, more automated safeguards measures will likely be needed to enable the International Atomic Energy Agency (IAEA) to achieve its safeguards objectives in a fiscally constrained environment. Monitoring the process data from the load cells built into the cylinder feed and withdrawal (F/W) stations (i.e., cylinder weight data) can significantly increase the IAEA’s ability to efficiently achieve the fundamental safeguards task of confirming operations as declared (i.e., no undeclared activities). Researchers at the Oak Ridge National Laboratory, Los Alamos National Laboratory, the Joint Research Center (in Ispra, Italy), and University of Glasgow are investigating how this weight data can be used for IAEA safeguards purposes while fully protecting the operator’s proprietary and sensitive information related to operations. A key question that must be resolved is, what is the necessary frequency of recording data from the process F/W stations to achieve safeguards objectives? This paper summarizes Monte Carlo simulations of typical feed, product, and tails withdrawal cycles and evaluates longer sampling frequencies to determine the expected errors caused by low-frequency sampling and its impact on material balance calculations.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Harnessing Vehicle Automation for Public Mobility -- An Overview of Ongoing Efforts

This presentation takes a look at the efforts to harness automated vehicle technology for public transport. The European CityMobil2 is the leading demonstration project in which automated shuttles were, or are planned to be, demonstrated in several cities and regions. The presentation provides a brief overview of the demonstrations at Oristano, Italy (July 2014), LaRochelle, France (Dec 2014), Lausanne, Switzerland (Apr 2015), Vantaa, Finland (July 2015), and Trikala, Greece (Sept 2015). In addition to technology exposition, the objectives included generating a legal framework for operation in each location and gaging the reaction of the public to unmanned shuttles, both of which were successfully achieved. Several such demonstrations are planned throughout the world, including efforts in North America in conjunction with the GoMentum Station in California. These early demonstration with low-speed automated shuttles provide a glimpse of the possible with a fully automated fleet of driverless vehicle providing a public transit service.

33 ADVANCED PROPULSION SYSTEMS↗

"FACILS 2014: Microbially-driven facilitation systems in environmental biotechnology" (hereafter "FACILS") presented here by the European Commission (EC)-United States (US) Task Force on Biotechnology Research

As we enter the 21st century, the sustainability of the biosphere is a global challenge that can best be met with a global response. This includes how we train and promote our next generation of research scientists in the emerging arenas of genome-enabled biology and a bio-based economy. It is this fundamental issue that formed the motivation for designing and conducting a shortcourse entitled “FACILIS 2014: Microbially-driven facilitation systems in environmental biotechnology” (hereafter “FACILIS”) presented here by the European Commission (EC)-United States (US) Task Force on Biotechnology Research. This WG was established in 1994 under the umbrella of the US-EC Task Force on Biotechnology Research, a transatlantic collaborative group overseen by the US Office of Science and Technology Policy (OSTP) and the EC. The Environmental Biotechnology Working Group maintains several goals, including establishing research links between scientists in EU countries and the US and fostering the careers of junior scientists from both sides of the Atlantic to the global nature of scientific cooperation. To that end, a shortcourse was held at the University of Milan in Italy on July 12-25 2014 organized around cross-cutting themes of genomic science and designed to attract a stellar group of interdisciplinary early carrier researchers. A total of 22 students, 10 from the US and 12 from the EU participated. The course provided them with hands-on experience with the latest scientific methods in genomics and bioinformatics; using a format that combines lectures, laboratory research and field work with the final goal to enable researchers to finally turn data into knowledge.

54 ENVIRONMENTAL SCIENCES↗

Favorable Structural–Tectonic Settings and Characteristics of Globally Productive Arcs

There are currently 74 productive geothermal systems associated with volcanic centers (VCs) in arcs globally, including actively producing systems, past producing systems, and systems with successful flow tests. The total installed or tested capacity of these 74 geothermal systems is 7,605 MWe, ranging from 0.7 MWe each at Copahue, Chile and Barkhatnaya Sopka, Kamchatka to 795 MWe, Larderello, Italy, and averaging 90.5 MWe per system. These 74 productive VCs constitute 10% of 732 VCs distributed across more than a dozen major arcs around the world. The intra-arc (within-arc) tectonic setting is highly variable globally, ranging from extension to transtension, transpression, or compression. Furthermore, the shear strain associated with oblique plate convergence can be accommodated by either intra-arc or arc-marginal deformation. The structural-tectonic settings of these 74 productive VCs were characterized to add to a global catalog of parameters to help guide future exploration, development, and regional resource potential.

15 GEOTHERMAL ENERGY↗