Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ION MICROSCOPES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Citrate-based sol-gel synthesis of blue- and green-emitting BaLa{sub 2}WO{sub 7}:Tm{sup 3+} or Er{sup 3+} phosphors and their luminescence properties

Highlights: • The BLWO:Tm{sup 3+} or Er{sup 3+} phosphors were prepared by a citrate-based sol-gel method. • The BLWO:Tm{sup 3+} or Er{sup 3+} phosphors exhibited blue and green emissions under UV or NUV excitations. • The blue- and green-emitting BLWO:Tm{sup 3+} or Er{sup 3+} phosphors exhibited good thermal properties. - Abstract: BaLa{sub 2}WO{sub 7}:Tm{sup 3+} or Er{sup 3+} (BLWO:Tm{sup 3+} or Er{sup 3+}) single doped phosphors were prepared by a citrate-based sol-gel method. The crystalline properties of the prepared blue- and green-emitting phosphor materials were analyzed by X-ray diffraction (XRD) after annealing at 1350 °C. The XRD patterns of the both phosphors revealed monoclinic structure with a space group of P21/b. The morphological properties and elemental mappings of the BLWO:0.02Tm{sup 3+} and BLWO:0.01Er{sup 3+} phosphors were measured by field-emission scanning electron microscope images and energy dispersive X-ray spectrum, respectively. The photoluminescence (PL) spectra of BLWO:Tm{sup 3+} phosphors showed characteristic emission peaks of Tm{sup 3+} ions from the visible blue to near-infrared regions with the dominant emission at 799 nm ({sup 3}H{sub 4} → {sup 3}H{sub 6}) under ultraviolet (UV) and near-UV excitation wavelengths. Similarly, Er{sup 3+} ions activated BLWO phosphors exhibited intense green emissions at 548 nm ({sup 4}S{sub 3/2} → {sup 4}I{sub 15/2}) under the characteristic excitation wavelength of 381 nm. Furthermore, the temperature-dependent PL emission spectra and the luminescence decay curves were measured for the optimized BLWO:0.02Tm{sup 3+} and BLWO:0.01Er{sup 3+} phosphors. The chromaticity coordinates for the optimized blue- and green-emitting phosphors were calculated.

36 MATERIALS SCIENCE↗

Lithiation of Rutile TiO 2 -Coated Si NWs Observed by in Situ TEM

Lithiation of rutile TiO 2 coated Si NWs was performed inside a transmission electron microscope. TiO 2 coatings with sufficiently large coating thickness-to-NW diameter ratio induce segmented lithiation of a Si NW that reduces radial but promotes axial Li ion migration during transformation of Si to Li 15 Si 4 .

36 MATERIALS SCIENCE↗

Asymmetric Wettability Directs Leidenfrost Droplets

Leidenfrost phenomena on nano- and microstructured surfaces are of great importance for increasing control over heat transfer in high power density systems utilizing boiling phenomena. They also provide an elegant means to direct droplet motion in a variety of recently emerging fluidic systems. Here, we report the fabrication and characterization of tilted nanopillar arrays (TNPAs) that exhibit directional Leidenfrost water droplets under dynamic conditions, namely on impact with Weber numbers 40 at T 325 C. The batch fabrication of the TNPAs was achieved by glancing-angle anisotropic reactive ion etching of a thermally dewet platinum mask, with mean pillar diameters of 100 nm and heights of 200-500 nm. In contrast to previously implemented macro- and microscopic Leidenfrost ratchets, our TNPAs induce no preferential directional movement of Leidenfrost droplets under conditions approaching steady-state film boiling, suggesting that the observed droplet directionality is not a result of asymmetric vapor flow. Using high-speed imaging, phase diagrams were constructed for the boiling behavior upon impact for droplets falling onto TNPAs, straight nanopillar arrays, and smooth silicon surfaces. The asymmetric impact and directional trajectory of droplets was exclusive to the TNPAs for impacts corresponding to the transition boiling regime, revealing that asymmetric wettability upon impact is the mechanism for the droplet directionality.

asymmetric rebound↗

Fabrication of Si surface pattern by Ar beam irradiation and annealing method

The fabrication process of crater structures on Si crystal has been studied by an irradiation of Ar beam and a thermal annealing at 600 Degree-Sign C. The fabricated surface was measured by field emission scanning electron microscope and atomic force microscope. The results have shown the controllability of specifications of crater formation such as density, diameter and depth by changing two irradiation parameters, fluence and energy of Ar ions. By changing the fluence over a range of 1 {approx} 10 Multiplication-Sign 10{sup 16}/cm{sup 2}, we could control a density of crater 0 {approx} 39 counts/100{mu}m{sup 2}. By changing the energy over a range of 90 {approx} 270 keV, we could control a diameter and a depth of crater in 0.8 {approx} 4.1{mu}m and 99 {approx} 229nm, respectively. The present result is consistent with the previously proposed model that the crater structure would be arising from an exfoliated surface layer of silicon. The present result has indicated the possibility of the crater production phenomena as a hopeful method to fabricate the surface pattern on a micro-nano meter scale.

36 MATERIALS SCIENCE↗

Dynamical level-crossing model for the time-dependent electron emission from dielectric surfaces in symmetric dielectric barrier discharges

In field emission plasmas, electrons that initiate plasma formation come from the surface of a metallic electrode, or wall, with emission controlled by the electron-work function of the wall, and can be computed via the Fowler-Nordheim formula. Impinging ions modify the rate at which electrons leave the surface, and are accounted via the coefficient of secondary electron emission. However, in the case of dielectric surfaces, the microscopic mechanism by which electrons are emitted is not as well understood. While simulations of dielectric barrier discharge plasmas assume an initial density of electrons in a time-dependent simulation, whether the presence of electrons is a necessary ambient condition or whether it is a result of emission from a surface is not clear. This is particularly relevant in the context of micro and nanoscale plasma generators when surface-related effects become more important. Here we consider electron emission from dielectric surfaces in the context of dielectric barrier discharges. The configuration of interest consists of two parallel-plate metallic electrodes, each covered by a dielectric layer. Assuming that the initial electrons for plasma formation arise from the surface, we compute the rate of charge transfer from surfaces, which is a necessary, but not sufficient, condition for plasma formation. This paper presents the application of the theory of nonadiabatic transitions (dynamical level crossing) to the problem of electron emission from dielectric surfaces in dielectric barrier discharges. Furthermore, the microscopic model of electron transfer described here has potential applications in the design of micro and nanoscale plasma generators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Micrometeoroid Impacts on the Hubble Sace Telescope Wide Field and Planetary Camera 2: Ion Beam Analysis of Subtle Impactor Traces

Recognition of origin for particles responsible for impact damage on spacecraft such as the Hubble Space Telescope (HST) relies upon postflight analysis of returned materials. A unique opportunity arose in 2009 with collection of the Wide Field and Planetary Camera 2 (WFPC2) from HST by shuttle mission STS-125. A preliminary optical survey confirmed that there were hundreds of impact features on the radiator surface. Following extensive discussion between NASA, ESA, NHM and IBC, a collaborative research program was initiated, employing scanning electron microscopy (SEM) and ion beam analysis (IBA) to determine the nature of the impacting grains. Even though some WFPC2 impact features are large, and easily seen without the use of a microscope, impactor remnants may be hard to find.

Grime, G. W.↗

Center for Isotope Cosmochemistry and Geochronology at NASA Johnson Space Center

Ten years in the making the Center for Isotope Cosmochemistry and Geochronology (CICG) at NASA Johnson Space Center is designed to be a cooperative analytical facility where novel techniques are developed and performed. Our team works collaboratively to operate this integrated lab suite comprising sample preparation, metal-free clean chemistry, and mass spectrometers to measure a wide variety of elements and isotopes in astromaterials. Contamination control is enacted throughout by a positive pressure cascade of HEPA filtered air, weekly surface cleaning and particle counting. Astromaterials processing is performed with application-specific mortar and pestles, heavy liquid separation, a Frantz magnetic separator, as well as hand-picking using optical microscopes in laminar flow boxes. Microsampling is also carried out using a New Wave MicroMill. Elements for isotopic analysis are isolated from acid-digested samples using ion-exchange chromatography. Cross-contamination is minimized with dedicated laminar flow boxes and labware for different purification protocols. Instrumentation includes a ThermoFisher Element XR inductively coupled plasma mass spectrometer (ICP-MS) for quantification of elemental concentrations in dissolved sample solutions. For in situ analysis, a Teledyne Photon Machines Analyte Excite+ laser ablation system is coupled to the Element XR. The ThermoFisher Triton thermal ionization mass spectrometer (TIMS) is used to measure the isotopic composition of elements such as CA, K, Cr, Rb, Sr, Sm, Nd at high precision in processed samples. For a more diverse range of isotopic analyses, CICG houses a Nu Sapphire 1700 multi-collector inductively coupled plasma mass spectrometer (MC-ICP-MS), which is a large geometry instrument with a multi-pole collision cell for interference removal. An Applied Spectra Instruments J200 femto-second laser is planned for install this Fall and will be coupled to the Nu Sapphire 1700. NASA’s Internal Scientist Funding Model (ISFM)supports this facility. Advanced analytical geochemistry techniques are applied to targeted astromaterials to address important problems in planetary sciences, with a longer-term goal of preparing for samples collected and returned by space missions. CICG is open to collaborations on projects that utilize the facility’s unique capabilities and are within its research scope. We are particularly eager to support and share expertise with the next generation of planetary scientists.

Justin I Simon↗

Beam dynamics in an ultra-low energy storage rings (review of existing facilities and feasibility studies for future experiments)

Storage rings operating at ultra-low energies and in particular electrostatic storage rings have proven to be invaluable tools for atomic and molecular physics. Due to the mass independence of the electrostatic rigidity, these machines are able to store a wide range of different particles, from light ions to heavy singly charged bio-molecules. However, earlier measurements showed strong limitations on beam intensity, fast decay of ion current, reduced life time etc. The nature of these effects was not fully understood. Also a large variety of experiments in future generation ultra-low energy storage and decelerator facilities including in-ring collision studies with a reaction microscope require a comprehensive investigation of the physical processes involved into the operation of such rings. In this paper, we present review of non-linear and long term beam dynamics studies on example of the ELISA, AD Recycler, TSR and USR rings using the computer codes BETACOOL, OPERA-3D and MAD-X. The results from simulations were benchmarked against experimental data of beam losses in the ELISA storage ring. We showed that decay of beam intensity in ultra-low energy rings is mainly caused by ion losses on ring aperture due to multiple scattering on residual gas. Beam is lost on ring aperture due to small ring acceptance. Rate of beam losses increases at high intensities because of the intra-beam scattering effect adds to vacuum losses. Detailed investigations into the ion kinetics under consideration of the effects from electron cooling and multiple scattering of the beam on a supersonic gas jet target have been carried out as well. The life time, equilibrium momentum spread and equilibrium lateral spread during collisions with this internal gas jet target were estimated. In addition, the results from experiments at the TSR ring, where low intensity beam of CF{sup +} ions at 93 keV/u has been shrunk to extremely small dimensions have been reproduced. Based on these simulations, conditions for stable ring operation with extremely low emittance beam are presented. Finally, results from studies into the interaction of ions with a gas jet target at 3–30 keV energy range are summarized.

43 PARTICLE ACCELERATORS↗

Structural characterization of layered Na 0.5 Co 0.5 Mn 0.5 O 2 material as a promising cathode for sodium-ion batteries

Layered Na0.5Co0.5Mn0.5O2 material is synthesized through a facile mixed hydroxy-carbonate route using (Co0.5Mn0.5)2(OH)2CO3 precursor and well characterized as a hexagonal layered structure under P63/mmc space group. The lattice parameters and unit cell volume (a ¼ 2.8363 Å, c ¼ 11.3152 Å and V ¼ 78.83 Å3 ) are calculated by Rietveld refinement analysis. A flaky-bundle morphology is obtained to the layered Na0.5Co0.5Mn0.5O2 material with the hexagonal flake size ~30 nm. Advanced transmission electron microscopic images are revealed the local structure of the layered Na0.5Co0.5Mn0.5O2 material with contrasting bright dots and faint dark dots corresponding to the Co/Mn and Na atoms. Two oxidation and reduction peaks are occurred in a cyclic voltammetric analysis corresponding to Co3þ/Co4þ and Mn3þ/Mn4þ redox processes. These reversible processes are attributed to the intercalation/de-intercalation of Naþ ions into the host structure of layered Na0.5Co0.5Mn0.5O2 material. Accordingly, the sodium cell is delivered the initial charge-discharge capacity 53/144 mAh g1 at 0.5 C, which cycling studies are extended to rate capability test at 1 C, 3 C and 5C. Eventually, the Na-ion full-cell is yielded cathode charge-discharge capacity 55/52 mAh g1 at 0.212 mA and exhibited as a high voltage cathode for Na-ion batteries.

Cathode performance↗

Electron energy loss spectroscopy study of ceria sinters and nanoparticles irradiated with swift heavy ions

The electronic energy loss spectra of ceria (CeO 2 ) irradiated with swift heavy ions (27 MeV Xe and 946 MeV Au) in the electronic slowing down regime were measured for bulk sintered samples and nanoparticles by using a double Cs-corrected transmission electron microscope. The low-loss region as well as the core-loss region, including the oxygen K-edge and cerium M 4, 5 white lines, were recorded. No strong lattice disorder was found in the low-loss peaks for both types of samples showing the same bulk oxygen plasmon loss peak at about 15 eV. However, there is a clear evidence of cerium reduction to the trivalent oxidation state after irradiation for the sintered samples as shown by the K-edge shape of oxygen and decrease of the Ce M 4 /M 5 intensity ratio. A similar change of the M 4 /M 5 intensity ratio was observed for the irradiated nanoparticles with respect to the virgin sample owing to the high energy input inside the nanograin. The effect of radiation damage on electron energy loss spectroscopy data is analyzed for both types of samples and irradiation conditions.

Crystallographic defects↗

Investigating the Energy Storage Mechanism of SnS 2 -rGO Composite Anode for Advanced Na-Ion Batteries

Tin sulfide–reduced graphene oxide (SnS 2 -rGO) composite material is investigated as an advanced anode material for Na-ion batteries. It can deliver a reversible capacity of 630 mAh g –1 with negligible capacity loss and exhibits superb rate performance. Here, the energy storage mechanism of this SnS 2 -rGO anode and the critical mechanistic role of rGO will be revealed in detail. A synergistic mechanism involving conversion and alloying reactions is proposed based on our synchrotron X-ray diffraction (SXRD) and in situ X-ray absorption spectroscopy (XAS) results. Contrary to what has been proposed in the literature, we determined that Na 2 S 2 forms instead of Na 2 S at the fully discharge state. The as-formed Na 2 S 2 works as a matrix to relieve the strain from the huge volume expansion of the Na–Sn alloy reaction, shown in the high resolution transmission electron microscope (HRTEM). In addition, the Raman spectra results suggest that the rGO not only assists the material to have better electrochemical performance by preventing particle agglomeration of the active material but also coordinates with Na-ions through electrostatic interaction during the first cycle. Here, the unique reaction mechanism in SnS 2 -rGO offers a well-balanced approach for sodium storage to deliver high capacity, long-cycle life, and superior rate capability.

25 ENERGY STORAGE↗

Direct photon calculations in heavy-ion collisions at {radical}(s{sub NN})=62.4A to 200A GeV in a (3+1)-dimensional hybrid approach

Direct photon spectra from central Au + Au and Cu + Cu collisions at {radical}(s{sub NN})=62.4,130, and 200A GeV are calculated within the ultrarelativistic quantum molecular-dynamics microscopic transport model and a micro+macro hybrid model. In the latter approach, the high-density part of the transport evolution is replaced by an ideal (3+1)-dimensional hydrodynamic calculation. We study the impact of viscosity and full local thermalization and compare the calculations to measurements obtained by the PHENIX Collaboration. We find a reasonable agreement with the experimental data for calculations involving a quark-gluon-plasma phase.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Focused Ion Beam Fabrication of LiPON-based Solid-state Lithium-ion Nanobatteries for In Situ Testing

Solid-state electrolytes are a promising replacement for current organic liquid electrolytes, enabling higher energy densities and improved safety of lithium-ion (Li-ion) batteries. However, a number of setbacks prevent their integration into commercial devices. The main limiting factor is due to nanoscale phenomena occurring at the electrode/electrolyte interfaces, ultimately leading to degradation of battery operation. These key problems are highly challenging to observe and characterize as these batteries contain multiple buried interfaces. One approach for direct observation of interfacial phenomena in thin film batteries is through the fabrication of electrochemically active nanobatteries by a focused ion beam (FIB). As such, a reliable technique to fabricate nanobatteries was developed and demonstrated in recent work. Herein, a detailed protocol with a step-by-step process is presented to enable the reproduction of this nanobattery fabrication process. In particular, this technique was applied to a thin film battery consisting of LiCoO 2 /LiPON/a-Si, and has further been previously demonstrated by in situ cycling within a transmission electron microscope.

25 ENERGY STORAGE↗

The role of Nb in intensity increase of Er ion upconversion luminescence in zirconia

It is found that Nb co-doping increases the luminescence and upconversion luminescence intensity in rare earth doped zirconia. Er and Yb-doped nanocrystalline samples with or without Nb co-doping were prepared by sol-gel method and thermally annealed to check for the impact of phase transition on luminescence properties. Phase composition and grain sizes were examined by X-ray diffraction; the morphology was checked by scanning- and high-resolution transmission electron microscopes. Both steady-state and time-resolved luminescence were studied. Comparison of samples with different oxygen vacancy concentrations and different Nb concentrations confirmed the known assumption that oxygen vacancies are the main agents for tetragonal or cubic phase stabilization. The oxygen vacancies quench the upconversion luminescence; however, they also prevent agglomeration of rare-earth ions and/or displacement of rare-earth ions to grain surfaces. It is found that co-doping with Nb ions significantly (>20 times) increases upconversion luminescence intensity. Hence, ZrO{sub 2}:Er:Yb:Nb nanocrystals may show promise for upconversion applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlating Humidity-Dependent Ionically Conductive Surface Area with Transport Phenomena in Proton-Exchange Membranes

The objective of this effort was to correlate the local surface ionic conductance of a Nafion? 212 proton-exchange membrane with its bulk and interfacial transport properties as a function of water content. Both macroscopic and microscopic proton conductivities were investigated at different relative humidity levels, using electrochemical impedance spectroscopy and current-sensing atomic force microscopy (CSAFM). We were able to identify small ion-conducting domains that grew with humidity at the surface of the membrane. Numerical analysis of the surface ionic conductance images recorded at various relative humidity levels helped determine the fractional area of ion-conducting active sites. A simple square-root relationship between the fractional conducting area and observed interfacial mass-transport resistance was established. Furthermore, the relationship between the bulk ionic conductivity and surface ionic conductance pattern of the Nafion? membrane was examined.

36 MATERIALS SCIENCE↗

Fast and Universal Kohn-Sham Density Functional Theory Algorithm for Warm Dense Matter to Hot Dense Plasma

Understanding many processes, e.g., fusion experiments, planetary interiors, and dwarf stars, depends strongly on microscopic physics modeling of warm dense matter and hot dense plasma. This complex state of matter consists of a transient mixture of degenerate and nearly free electrons, molecules, and ions. This regime challenges both experiment and analytical modeling, necessitating predictive ab initio atomistic computation, typically based on quantum mechanical Kohn-Sham density functional theory (KS-DFT). However, cubic computational scaling with temperature and system size prohibits the use of DFT through much of the warm dense matter regime. A recently developed stochastic approach to KS-DFT can be used at high temperatures, with the exact same accuracy as the deterministic approach, but the stochastic error can converge slowly and it remains expensive for intermediate temperatures (< 50 eV). Here we have developed a universal mixed stochastic-deterministic algorithm for DFT at any temperature. This approach leverages the physics of KS-DFT to seamlessly integrate the best aspects of these different approaches. We demonstrate that this method significantly accelerated self-consistent field calculations for temperatures from 3 to 50 eV, while producing stable molecular dynamics and accurate diffusion coefficients.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Coordinated Mineralogical and Isotopic Analysis of a Cosmic Symplectite Identified in a Stardust Terminal Particle

Comet Wild-2 samples returned by the Stardust spacecraft contain a chemically diverse mixture of material, underscoring the complex nature of comets. Studies of entire Stardust aerogel tracks afford the opportunity to examine the fine-grained particle fragments distributed along the length of the track as well as the terminal particles. Previous TEM characterization of a terminal particle (TP) in track #147 revealed a symplectically intergrown iron sulfide and oxide assemblage. Mineralogically similar assemblages, known as cosmic symplectites (COS, formerly termed "new-PCP"), have only been identified in the primitive carbonaceous chondrite Acfer 094. Meteoritic COS have isotopically heavy O compositions (delta (sup 17), O-18 = 180per mille) that point to interactions with early solar system primordial water. In this study we report mineralogical and O isotopic measurements of the Wild-2 COS assemblage. Experimental: Track #147 is a "bulbous"-type track (4600 microns long) containing 7 terminal particles. The TPs were removed from the track, embedded in epoxy, and ultramicrotomed. A JEOL 2500SE 200 keV field-emission scanning-transmission electron microscope was used to obtain quantitative elemental maps and detailed mineralogical characterization. Following TEM analysis, two thin sections of TP4 (12 microns) were analyzed for O isotopes by raster ion imaging with the JSC NanoSIMS 50L. All three O isotopes were measured simultaneously using electron multipliers. San Carlos olivine grains were used as isotopic standards. Results and Discussion: The COS in the Wild-2 track #147 TP4 sample consists of symplectically intergrown pentlandite and nanocrystalline maghemite which coexists with high-Ca pyroxene with Na and Cr (kosmochlor component). This kosmochlor component could have a nebular origin and be precursors to type II chondrules in ordinary chondrites. Yet pentlandite is not a stable phase in the nebula. The COS in Acfer 094 also consists of pentlandite, but contains magnetite [4] rather than the more oxidized maghemite observed in the Wild-2 COS. The Acfer 094 COS display heavy O isotopic compositions that are the result of sulfidization and oxidation of Fe, Ni-metal grains and sulfides by O-17- and O-18-rich water in the solar nebula or possibly on the parent body. The O isotopic composition of the Wild-2 COS, however, is indistinguishable from terrestrial, indicating it was not altered by the same primordial aqueous reservoir as the Acfer 094 COS. The alteration could have occurred on the parent body by isotopically equilibrated ice. The mineralogy and petrography of Wild-2 samples suggests an incomplete or nascent hydration process. In future work we will analyze S isotopes in the track #147 TP4 COS and search for additional COS in Stardust samples.

Nguyen, A. N.↗

The Mojave Subsurface Bio-Geochemistry Explorer (MOSBE)

The MOSBE Team has developed a terrestrial field campaign to explore two subsurface biological habitats under the Mojave Desert. This field campaign will not only help us understand terrestrial desert biology, but also will develop methodologies and strategies for potential future Mars missions that would seek to explore the Martian subsurface. We have proposed to the ASTEP program to integrate a suite of field demonstrated instruments with a 20 m subsurface drill as a coherent unit, the Mojave Subsurface Bio-geochemistry Explorer. The ATK Space Modular Planetary Drill System (MPDS) requires no drilling fluid, which allows aseptic sampling, can penetrate lithic ground up to 20 meters of depth, and utilizes less than 100 Watts throughout the entire depth. The drill has been developed and demonstrated in field testing to a depth of 10 meters in Arizona, December 2002. In addition to caching a continuous core throughout the drilling depth, it also generates and caches cuttings and fines that are strata-graphically correlated with the core. As a core segment is brought to the surface, it will be analyzed for texture and structure by a color microscopic imager and for relevant chemistry and mineralogy with a UV fluorescence/Raman spectrometer. Organic and soluble ionic species will be identified through two instruments -- a microcapillary electrophoresis, and an ion trap mass spectrometer that have been developed under PIDDP, ASTID and MIDP funding.

robotic subsurface drilling↗