Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERSTITIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Vacuum Pressureless Sintering of Ti-6Al-4V Alloy with Full Densification and Forged-Like Mechanical Properties

Ti-6Al-4V ingots with a nearly 100% density, fine and homogeneous basket-weave microstructure, and better comprehensive mechanical properties (UTS = 935 MPa, Y.S. = 865 MPa, El. = 15.8%), have been manufactured by vacuum pressureless sintering of blended elemental powders. Coarse TiH{sub 2} powder, Al powder (2, 20 μm), V powder, and Al-V master alloy powder were used as raw materials to produce different powder mixtures (D{sub 50} = 10 μm). Then, the compacts made by cold isostatic pressing were consolidated by different sintering curves. A detailed investigation of different as-sintered samples revealed that a higher density can be obtained by generating transient molten Al in the sintering process. Coarse Al powder and a rapid heating rate under the melting point of Al contribute to molten Al formation. The presence of temporary liquid phase changes the sintering mechanism, accelerating the sintering neck formation, improving sinterability of the powder mixtures. Density of 99.5% was achieved at 1150 °C, which is markedly lower than the sintering temperatures reported for conventional blended elemental powder metallurgy routes. In addition, low interstitial content, especially for oxygen (0.17 wt.%), is obtained by strict process control.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Effect of Strengthening Mechanism on Strain-Rate Related Tensile Properties of Low-Carbon Sheet Steels for Automotive Application

In order to ensure crash resistance of the steels used in automotive components, the ensile deformation behavior needs to be studied and predicted not only under quasi-static condition, but also under dynamic loading rates. In the present study, tensile tests have been performed on four different automobile grade sheet steels, namely interstitial free steel, dual-phase 600 and 800, and a carbon manganese steel over the strain rate regime of 0.001-800/s. Apart from the variation in strength (which always increased with strain rate), the effect of strengthening mechanism on strain rate sensitivity and strain hardening behavior has been evaluated. Strain rate sensitivity was found to increase at high-strain rate regime for all the steels. Contribution of solid solution hardening on strain rate sensitivity at lower plastic strains was found to be higher compared to dislocation strengthening and second-phase hardening. However, precipitation hardening coupled with solid solution hardening produced the highest strain rate sensitivity, in C-Mn-440 steel at high strain rates. Different strain-rate-sensitive models which take into account the change in yield stress and strain hardening behavior with strain rate for ductile materials were used to predict the flow behavior of these sheet steels at strain rates up to 800/s.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Doping Effects on the Ductility of a Lightweight Refractory High-Entropy Alloy: Grain Boundary and Bulk Lattice Aspects

Doping elements in small amounts often segregate to grain boundaries (GBs) in alloys and can significantly impact mechanical properties and performance. Refractory high-entropy alloys (RHEAs) are known for their poor ductility, especially at low temperatures. Promoting GB cohesion through segregation can be an effective approach to mitigate embrittlement. Here, in this study, first-principles density functional theory (DFT) calculations were performed to examine the effects of important interstitial dopants (O, B, C, and N) and substitutional dopants (Cr, Y, La, and Ce) on the Σ5(310) [001] tilt GB of a lightweight RHEA Nb 32.5 Ti 27.5 Mo 22.5 Ta 12.5 Hf 2.5 Zr 2.5 . The DFT calculations reveal that certain dopants, such as B, C, Cr, N, and Y, exhibit favorable GB strengthening effects by improving bonding interactions with the bulk alloy. The impact of doping on the ductility parameter of the bulk lattice, defined as the ratio of surface energy to unstable stacking fault energy for the {110} <111> slip system, was also studied; and the results show that doping reduces the intrinsic ductility of the alloy, decreasing the D-parameter from 2.90 to 2.55, depending on the specific dopant. The present findings provide a foundational understanding at atomic level of the effect of representative dopants on mechanical properties of RHEAs and can be used to guide future alloy design for improved mechanical properties.

deformation charge density↗
DOE OSTI2022

Hydrogen induced dislocation core reconstruction in bcc tungsten

Dislocation, playing a crucial role in the plastic deformation of metals, can be significantly affected by introducing solute elements. Hydrogen (H) embrittlement is one such example, while the underlying mechanism for H affected dislocation structural stability and mobility remains unclear and the role of H has been controversial. Here, using first-principles calculations, we demonstrate that the effect of H on screw dislocation in bcc tungsten (W) is H concentration-dependent, signified by a H-induced transition of SD core structure. At low concentrations of H segregation, dislocation maintains the intrinsic easy-core structure, and H atoms are attached to the “periphery” of dislocation to enhance dislocation motion. In contrast, at high H concentrations, dislocation transforms into a hard-core, metal hydride-like structure, as H atoms become the “body” of dislocation to significantly reduce the dislocation mobility in W. Further, such local easy-to-hard transition can also be induced by the other solutes, including helium, carbon, nitrogen and oxygen. Our work sheds new light on the H-dislocation interactions in bcc W, having broad implications in the interstitial solute-related phenomena.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Crucial role of Reg I from acinar-like cell cluster touching with islets (ATLANTIS) on mitogenesis of beta cells in EMC virus-induced diabetic mice

Recently, we reported the presence of distinct cell clusters named acinar-like cell clusters touching Langerhans islets with thin interstitial surrounding (ATLANTIS) in human pancreas. A morphological study in humans demonstrated that ATLANTIS and islet cell clusters are found together in the microenvironment enclosed by a common basement membrane, and ATLANTIS releases vesicles containing Regenerating gene protein (REG Iα) to islet cell clusters. We examined 1) the presence or absence of ATLANTIS in homozygous Reg I (mouse homologue of human REG Iα) deficient (Reg I{sup −/-}) and wild-type mice, and 2) the possible role of ATLANTIS in the regeneration of beta cell clusters after encephalomyocarditis (EMC) virus (D-variant) infection in Reg I{sup −/-} and wild-type mice. ATLANTIS was found in both wild-type and Reg I{sup −/-} mice. In both groups, mean blood glucose increased transiently to greater than 14.0 mmol/L at 5 days after EMC virus infection and recovered to baseline at 12 days. At 12 days after EMC virus infection, lower BrdU labeling indices were observed in islet beta cells of Reg I{sup −/-} mice compared to wild-type mice. Beta cell volume 12 days after EMC virus infection in Reg I{sup −/-} mice did not differ from that of wild-type mice. These results suggest that Reg I, which is released from ATLANTIS to islet beta cell clusters, has a crucial role in beta cell regeneration in EMC virus-induced diabetes. The presence of mechanism(s) other than that mediated by Reg I in beta cell restoration after destruction by EMC virus was also suggested.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Improved thermoelectric performance of α- and β- Cu 2 Se through suppression of hole density using extrinsic copper vacancies

Modulating Cu + ion disorder in Cu 2 Se can enable control over the polymorphism and the carrier density leading to enhanced thermoelectric properties for both α- and β-Cu 2 Se. Here we report that the incorporation of Cr 3+ into the Cu 2 Se crystal lattice facilitates the stabilization of α-Cu 2 Se at 300 K leading to a large (~140%) reduction in the carrier density both below and above the phase transition. This is attributed to the reduction in the density of intrinsic copper interstitials (Cu$^{•}_{i}$) within the Cu (2-δ-λ) (Cr$^{··}_{Cu}$)λ(V$^{'}_{Cu}$)δ(Cu$^{π}_{i}$) δ-2λ (h • ) δ-2λ Se crystal lattice. Such optimization of the carrier density led to a large (63%) increase in the thermopower and a drastic (46%) reduction in the total thermal conductivity for both α- and β-Cu 2 Se matrices. Consequently, a significant enhancement of the thermoelectric performance is observed in the entire temperature range from 300 K to 773 K. This results in high average ZT values for both α-Cu 2 Se (ZT ave = 0.60) and β-Cu 2 Se (ZT ave = 0.97), which paves the way for both near room temperature and high temperatures applications. Furthermore, this work provides a new approach to optimize the thermoelectric performance of Cu 2 Se-based materials by leveraging the interaction between mobile intrinsic Cu$^{·}_{i}$ and extrinsic V$^{'}_{Cu}$ to suppress the hole density.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Kinetic Activation-Relaxation Technique and Self-Evolving Atomistic Kinetic Monte Carlo: Comparison of on-the-fly kinetic Monte Carlo algorithms

Here, we present a comparison of the Kinetic Activation–Relaxation Technique (k-ART) and the Self-Evolving Atomistic Kinetic Monte Carlo (SEAKMC), two off-lattice, on-the-fly Kinetic Monte Carlo (KMC) techniques that were recently used to solve several materials science problems. We show that if the initial displacements are localized the dimer method and the Activation–Relaxation Technique nouveau provide similar performance. We also show that k-ART and SEAKMC, although based on different approximations, are in agreement with each other, as demonstrated by the examples of 50 vacancies in a 1950-atom Fe box and of interstitial loops in 16,000-atom boxes. Generally speaking, k-ART’s treatment of geometry and flickers is more flexible, e.g. it can handle amorphous systems, and rigorous than SEAKMC’s, while the later’s concept of active volumes permits a significant speedup of simulations for the systems under consideration and therefore allows investigations of processes requiring large systems that are not accessible if not localizing calculations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Hydrogen Localization and Cluster Formation in α-Zr from First-Principles Investigations

We report alpha-zirconium (α-Zr) is a hydrogen atom host material used in nuclear energy and semiconducting applications due to Zr's excellent properties such as corrosion resistance, low thermal neutrons cross-section, and thermodynamically favorable interstitial sequestering of H atoms. Herein we use density functional theory simulations to systematically analyze the initial stages of H insertion in the Zr matrix, and determine optimal hydrogen localization, distribution, and clustering tendencies from a thermodynamics and kinetics perspective. Our results suggest that H occupation of tetrahedral sites is strongly favored, consistent with previous experimental and theoretical studies. Further, a cooperative effect in H localization is shown where H atoms favor clustering. The H pair is found to be the most stable by occupying tetrahedral sites with pairs at second nearest-neighbor positions (TTn2). Among the four H atom clusters, the most favorable configuration has two TTn2 pairs forming "box " or "zig-zag" shaped-cluster with the pairs separated by 3.03 or 3.25 Å, respectively. Nudged elastic band simulations suggest that the formation of TTn2 is facile and is limited by the small diffusion barrier of the monomer of less than 0.1 eV. Further, the formation routes for the 4H atom clusters are also presented. The current study can serve as a foundation to systematically model H atom clustering in metals and alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Post-processing interstitialcy diffusion from molecular dynamics simulations

An algorithm to rigorously trace the interstitialcy diffusion trajectory in crystals is developed. The algorithm incorporates unsupervised learning and graph optimization which obviate the need to input extra domain specific information depending on crystal or temperature of the simulation. The algorithm is implemented in a flexible framework as a post-processor to molecular dynamics (MD) simulations. We describe in detail the reduction of interstitialcy diffusion into known computational problems of unsupervised clustering and graph optimization. We also discuss the steps, computational efficiency and key components of the algorithm. Using the algorithm, thermal interstitialcy diffusion from low to near-melting point temperatures is studied. We encapsulate the algorithms in a modular framework with functionality to calculate diffusion coefficients, migration energies and other trajectory properties. The study validates the algorithm by establishing the conformity of output parameters with experimental values and provides detailed insights for the interstitialcy diffusion mechanism. The algorithm along with the help of supporting visualizations and analysis gives convincing details and a new approach to quantifying diffusion jumps, jump-lengths, time between jumps and to identify interstitials from lattice atoms. -- Graphical abstract:.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Fast ionic conduction achieved through the design and synthesis of ceramic heterointerfaces

Lithium (Li) chloride and iron oxychloride (FeOCl), typically nonconductive, were combined to form a [Li 1+δ Cl] δ+ /[FeOCl] δ- heterointerface composite material (LFH), achieving ionic conductivities of >1 mS cm -1 . Analysis techniques (scanning transmission electron microscopy [STEM] and electron energy-loss spectroscopy [EELS]) indicated that the microstructure of LFH consisted of an amorphous LiCl-based shell surrounding a crystalline FeOCl-based core. Electrochemical measurements alongside solid-state 6,7 Li nuclear magnetic resonance (NMR) and molecular dynamic simulations revealed Li+ as the sole conductive species, with a diffusion barrier of ~0.25 eV. X-ray photoelectron spectroscopy (XPS) and X-ray absorption fine structure (XAFS) results further supported interstitial Li + diffusion at the heterointerface and within the LiCl phase, made possible by the heterointerface. Despite susceptibility to electronic conductivity, iron’s defects and multivalency (Fe³⁺, Fe²⁺) enable the Fe–O–Cl framework to accept Cl - , facilitating Li⁺ ionic conduction. Finally, a prototype solid-state cell (showing 97% Coulombic efficiency) demonstrated the viability of this heterointerface design for applications in energy storage.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Defect disorder in UO{sub 2}

A defect disorder model has been developed to determine equilibrium off-stoichiometry and its spatial variations in UO{sub 2} crystals. The model gives the concentrations of atomic defects and electronic carriers as functions of oxygen partial pressure and temperature in the bulk and near crystal surfaces subject to an oxygen environment. Energetic parameters from published density functional theory calculations have been integrated into the defect disorder model for an accurate determination of the defect density and off-stoichiometry. The ionosorption theory has been used to couple the oxygen environment with the defect state in the crystal as we solved for the defect disorder near crystal surfaces. Contrary to the common belief that hyper-stoichiometry of UO{sub 2} is dominated by oxygen interstitials, the current model predicts that this regime is rather dominated by uranium vacancies. The model predictions also show that, in the presence of surfaces, the point defect concentrations vary by orders of magnitude in the subsurface region relative to the bulk region. Highlights: • Defect disorder in bulk UO2+x is modeled in terms of temperature and oxygen pressure. • The densities of atomic defects and electronic charge carriers are determined. • The model is extended to study the heterogeneity of defect density near crystal surfaces. • The surface effect is modeled using ionosorption theory. • The dominant defect type and off-stoichiometry profile near surface are found.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Effects of size reduction on microstructural, optical, vibrational, magnetic and photocatalytic properties of ZnO nanocrystals

Highlights: • ZnO nanocrystals of different sizes 4–19 nm, thus different S/V ratios synthesized. • Lattice strain and lattice volume increase with size reduction. • Raman spectra show enhanced surface effects with phonon mode disappearance. • ESR shows exchange interaction; VSM shows surface originated ferromagnetism. • Photocatalysis is less affected with size reduction and surface enhancement. - Abstract: ZnO nanocrystals were synthesized in the size range 4 nm–19 nm by chemical co-precipitation method and extensively characterized by various techniques. Size control was achieved by changing the concentration of ME that acted as the capping agent. Lattice strain and lattice volume were found to increase with the decrease in crystallite size that could be attributed to an enhanced influence of surface atoms. Raman spectroscopy provided evidence of enhancement of surface influence and reduction of crystallinity with the observation of decrease in E{sub 2}{sup high} phonon mode intensity with a decrease in crystallite size. Electron spin resonance spectra revealed the presence of exchange interaction as well as presence of lattice disorder. Vibrating sample magnetometry results showed that M-H curves exhibit hysteresis loops which confirmed the ferromagnetic nature of the nanocrystals and it could be attributed to the interaction between localized electron spins resulting from oxygen vacancies at the surface. Blue shift of the UV–Visible absorption spectra was observed with decrease in crystallite size, which could be attributed to quantum confinement effect. Room temperature photoluminescence spectra were recorded under UV light excitation, which showed emission of different colours (light violet, violet, blue and green) in the visible region, attributable to the presence of various types of defects such as zinc interstitial, zinc vacancy and oxygen vacancy in the ZnO nanocrystals. Photodegradation of aqueous methylene blue by the ZnO nanocrystals was performed under simulated sunlight irradiation. There was a very small increase in efficiency of photodegradation with size reduction, which showed that there was no significant change in surface defects with size reduction in the nanocrystals despite the surface enhancement. A mechanism for photocatalysis involving defect states has been proposed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

Role of nickel doping on structural, optical, magnetic properties and antibacterial activity of ZnO nanoparticles

Highlights: • The XRD analyses revealed that the synthesizes nickel doped ZnO (Zn{sub 1−x}Ni{sub x}O, x = 0.0, 0.03, 0.06 and 0.09) nanostructures have hexagonal wurtzite structure. • The photoluminescence measurements revealed that the broad emission was composed of different bands due to zinc and oxygen vacancies. • X-ray photoelectron spectroscopy (XPS) confirmed the Ni incorporation in ZnO lattice as Ni{sup 2+} ions. • Room temperature ferromagnetism was observed due to the oxygen vacancies and zinc interstitials are the main reasons for ferromagnetism in Ni doped ZnO NPs. - Abstract: Zn{sub 1−x}Ni{sub x}O nanoparticles were synthesized by co-precipitation method. The crystallite sizes of the synthesized samples found to decrease from 38 to 26 nm with increase in nickel concentration. FTIR spectra confirmed the presence of Zn−O stretching bands at 577, 573, 569 and 565 cm{sup −1} in the respective ZnO NPs. Optical absorption spectra revealed the red shifted and estimated band gap is found to decrease with increase of Ni doping concentration. The PL spectra of all the samples exhibited a broad emission at 390 nm in the visible range. The carriers (donors) bounded on the Ni sites were observed from the micro Raman spectroscopic studies. Pure and Ni doped ZnO NPs showed significant changes in the M–H loop, especially the diamagnetic behavior changed into ferromagnetic nature for Ni doped samples. The antiferromagnetic super-exchange interactions between Ni{sup 2+} ions is increased in higher Ni doped ZnO NPs and also their antibacterial activity has been studied.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Direct observation of vast off-stoichiometric defects in single crystalline SnSe

Single crystalline tin selenide (SnSe) recently emerged as a very promising thermoelectric material for waste heat harvesting and thermoelectric cooling, due to its record high figure of merit ZT in mediate temperature range. The most striking feature of SnSe lies in its extremely low lattice thermal conductivity as ascribed to the anisotropic and highly distorted Sn-Se bonds as well as the giant bond anharmonicity by previous studies, yet no theoretical models so far can give a quantitative explanation to such low a lattice thermal conductivity. Here, we presented direct observation of an astonishingly vast number of off-stoichiometric Sn vacancies and Se interstitials, using sophisticated aberration corrected scanning transmission electron microscope; and credited the previously reported ultralow thermal conductivity of the SnSe single crystalline samples partly to their off-stoichiometric feature. In order to further validate the conclusion, we also synthesized stoichiometric SnSe single crystalline samples, and illustrated that the lattice thermal conductivity is deed much higher as compared with the off-stoichiometric single crystals. Finally, the scattering efficiency of individual point defect on heat-carrying phonons was then discussed in the state-of-art Debye-Callaway model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

High-fat diet aggravates 2,2′,4,4′-tetrabromodiphenyl ether-inhibited testosterone production via DAX-1 in Leydig cells in rats

Growing evidence has revealed that a high-fat diet (HFD) could lead to disorders of glycolipid metabolism and insulin-resistant states, and HFDs have been associated with the inhibition of testicular steroidogenesis. Our previous study demonstrated that 2,2′,4,4′-tetrabromodiphenyl ether (BDE47) could increase the risk of diabetes in humans and reduce testosterone production in rats. However, whether the HFD affects BDE47-inhibited testosterone production by elevating insulin levels and inducing related pathways remains unknown. In male rats treated with BDE47 by gavage for 12 weeks, the HFD significantly increased the BDE47 content of the liver and testis and increased the weight of the adipose tissue; increased macrovesicular steatosis in the liver and the levels of triglycerides, fasting glucose and insulin; further aggravated the disruption of the seminiferous epithelium; and lowered the level of testosterone, resulting in fewer sperm in the epididymis. Of note, the HFD enhanced BDE47-induced DAX-1 expression and decreased the expression levels of StAR and 3β-HSD in the testicular interstitial compartments in rats. In isolated primary Leydig cells from rats, BDE47 or insulin increased DAX-1 expression, decreased the expression of StAR and 3β-HSD, and reduced testosterone production, which was nearly reversed by knocking down DAX-1. These results indicated that the HFD aggravates BDE47-inhibited testosterone production through hyperinsulinemia, and the accumulation of testicular BDE47 that induces the up-regulation of DAX-1 and the subsequent down-regulation of steroidogenic proteins, i.e., StAR and 3β-HSD, in Leydig cells. - Highlights: • High-fat diet (HFD) aggravates the accumulation of BDE47 in liver and testis in rats. • HFD aggravates BDE47-inhibited testosterone production via DAX-1 in Leydig cells. • HFD enhances BDE47-induced the disorder of glycolipid metabolism and hyperinsulinemia. • Both hyperinsulinemia and accumulation of BDE47 inhibited testosterone via DAX-1.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Elucidation of the therapeutic role of mitochondrial biogenesis transducers NRF-1 in the regulation of renal fibrosis

Background: Mitochondrial dysfunction is a newly established risk factor for the development of renal fibrosis. Cell survival and injury repair is facilitated by mitochondrial biogenesis. Nuclear respiratory factor 1 (NRF-1) is a transcriptional regulation factor that plays a central role in the regulation of mitochondrial biogenesis. However, the transcription factor of this process in renal fibrosis is unknown. Thus, we hereby discussed the correlations of NRF-1 and renal interstitial fibrosis. Materials and methods: In vitro fibrosis model was established by treatment with transforming growth factor-β1 (TGF-β1) in NRK-49F (Normal Rat kidney fibroblast). We investigated the ROS production, mitochondrial biogenesis and fibrogenic marker (e.q. fibronectin) during the progression of renal fibrosis by kit and Western blotting assay. Here, we used that two distinct mechanisms regulate NRF-1 activation and degradation of NRF-1. NRF-1 was transfect by pcDNA-NRF-1 overexpression gene to evaluate the NRF-1 activity of the therapeutic effect in renal fibrosis. In addition, NRF-1 was silenced by shRNA-NRF-1 to evaluate the significance of NRF-1. ELISA was used to evaluate the secreted fibronectin. Immunofluorescence staining was used to assay the in situ expression of proteins (e.g. fibronectin, NRF-1). Results: Under renal fibrosis conditions, TGF-β1 (5 ng/ml) increased ROS. Simultaneously, TGF-β1-induced extracellular fibronectin by ELISA assay. In addition, TGF-β1 decreased expression of mitochondrial biogenesis. This is the first time to demonstrate that expression of NRF-1 is significantly decreased in renal fibrosis. However, NRK49F was a transfection with pcDNA-NRF-1 (2 μg/ml) expression vector dramatically reverse TGF-β1-induced cellular fibrosis concomitantly with the suppression of fibronectin (both intracellular and extracellular fibronectin). More importantly, transfection with shRNA-NRF-1 (2 μg/ml) significantly increased the expression of fibronectin of both intercellular and extracellular origins in NRK-49F cells. Discussion: These finding suggest that NRF-1 plays a pivotal role on renal cellular fibrosis. Moreover, NRF-1 might act as a novel renal fibrosis antagonist by down-regulating fibrosis signaling in renal fibroblast cells.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2013

KrF- and ArF-excimer-laser-induced absorption in silica glasses produced by melting synthetic silica powder

KrF- and ArF-excimer-laser-induced absorption of silica glasses produced by electric melting and flame fusion of synthetic silica powder were investigated. The growth of KrF-laser-induced absorption was more gradual than that of ArF-laser-induced absorption. Induced absorption spectra exhibited a peak at about 5.8 eV, of which the position and width differed slightly among samples and laser species. Widths of ArF-laser-induced absorption spectra were wider than those of KrF-laser-induced spectra. KrF-laser-induced absorption is reproducible by two Gaussian absorption bands peaking at 5.80 eV with full width at half maximum (FWHM) of 0.62 eV and at 6.50 eV with FWHM of 0.74 eV. For reproduction of ArF-laser-induced absorption, Gaussian bands at 5.41 eV with FWHM of 0.62 eV was necessary in addition to components used for reproducing KrF-laser-induced absorption. Based on the discussion of the change of defect structures evaluated from change of absorption components, we proposed that the precursor of the 5.8-eV band ascribed to E Prime center ({identical_to}Si{center_dot}) is {identical_to}Si-H HO-Si{identical_to} structures formed by the reaction between strained Si-O-Si bonds and interstitial H{sub 2} molecules during the irradiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

Origin of radiation tolerance in 3C-SiC with nanolayered planar defects

We have recently found that the radiation tolerance of SiC is highly enhanced by introducing nanolayers of stacking faults and twins [Y. Zhang et al., Phys. Chem. Chem. Phys. 14, 13429 (2012)]. To reveal the origin of this radiation resistance, we used in situ transmission electron microscopy to examine structural changes induced by electron beam irradiation in 3C-SiC containing nanolayers of (111) planar defects. We found that preferential amorphization, when it does occur, takes place at grain boundaries and at (111) and (111) planar defects. Radiation-induced point defects, such as interstitials and vacancies, migrate two-dimensionally between the (111) planar defects, which probably enhances the damage recovery.

36 MATERIALS SCIENCE↗