Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPURITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Acceptor impurity activation in III-nitride light emitting diodes

In this work, the role of the acceptor doping and the acceptor activation and its impact on the internal quantum efficiency (IQE) of a Gallium Nitride (GaN) based multi-quantum well light emitting diode is studied by microscopic simulation. Acceptor impurities in GaN are subject to a high activation energy which depends on the presence of proximate dopant atoms and the electric field. A combined model for the dopant ionization and activation barrier reduction has been developed and implemented in a semiconductor carrier transport simulator. By model calculations, we demonstrate the impact of the acceptor activation mechanisms on the decay of the IQE at high current densities, which is known as the efficiency droop. A major contributor to the droop is the electron leakage which is largely affected by the acceptor doping.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The effect of working gas impurities on plasma jets

Air intrusion reduced the purity of working gas inside the tube for plasma jet, and thereby, affected the discharge dynamics. In this paper, the effect of using working gas with different purity level (helium purity 99.99999%, 99.99%, 99.9%, and 99%) on photoionization and the chemical reactivity of plasma jet were studied using a 2 dimensional plasma jet model. Photoionization of air species acted as a source of pre-ionization in front of the ionization region, which facilitated the transition from localized discharge to streamers inside the tube. The density of reactive species inside the tube was found to increase with the concentration of working gas impurities. For the highest purity helium (99.99999%), despite a low photoionization rate and the distance between the photoionization region and ionization region inside the tube, by increasing the applied voltage and decreasing the distance between the electrode and nozzle, plasma jets were formed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interplay between mass-impurity and vacancy phonon scattering effects on the thermal conductivity of doped cadmium oxide

Understanding the impact and complex interaction of thermal carrier scattering centers in functional oxide systems is critical to their progress and application. In this work, we study the interplay among electron and phonon thermal transport, mass-impurity scattering, and phonon-vacancy interactions on the thermal conductivity of cadmium oxide. We use time domain thermoreflectance to measure the thermal conductivity of a set of CdO thin films doped with Dy up to the saturation limit. Using measurements at room temperature and 80 K, our results suggest that the enhancement in thermal conductivity at low Dy concentrations is dominated by an increase in the electron mobility due to a decrease in oxygen vacancy concentration. Furthermore, we find that at intermediate doping concentrations, the subsequent decrease in thermal conductivity can be ascribed to a large reduction in phononic thermal transport due to both point defect and cation-vacancy scattering. With these results, we gain insight into the complex dynamics driving phonon scattering and resulting thermal transport in functional oxides.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of magnetic field on the donor impurity in CdTe/Cd{sub 1-x}Mn{sub x}Te quantum well wire

The donor impurity binding energy in CdTe / Cd{sub 1-x}Mn{sub x}Te QWW with square well confinement along x – direction and parabolic confinement along y – direction under the influence of externally applied magnetic field has been computed using variational principle in the effective mass approximation. The spin polaronic shift has also been computed. The results are presented and discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Particle in cell/Monte Carlo collision analysis of the problem of identification of impurities in the gas by the plasma electron spectroscopy method

The work deals with the Particle in Cell/Monte Carlo Collision (PIC/MCC) analysis of the problem of detection and identification of impurities in the nonlocal plasma of gas discharge using the Plasma Electron Spectroscopy (PLES) method. For this purpose, 1d3v PIC/MCC code for numerical simulation of glow discharge with nonlocal electron energy distribution function is developed. The elastic, excitation, and ionization collisions between electron-neutral pairs and isotropic scattering and charge exchange collisions between ion-neutral pairs and Penning ionizations are taken into account. Applicability of the numerical code is verified under the Radio-Frequency capacitively coupled discharge conditions. The efficiency of the code is increased by its parallelization using Open Message Passing Interface. As a demonstration of the PLES method, parallel PIC/MCC code is applied to the direct current glow discharge in helium doped with a small amount of argon. Numerical results are consistent with the theoretical analysis of formation of nonlocal EEDF and existing experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of transition metal impurities on the strength of grain boundaries in vanadium

Effects of 3d (Ti-Ni), 4d (Zr-Pd), and 5d (Hf-Pt) transition metal impurities on strength of two representative vanadium grain boundaries (GBs), symmetric Σ3(111) and asymmetric Σ5(210), were studied by first-principles calculations within the framework of the Rice-Wang thermodynamic model and within the computational tensile test. The desirable elements to increase the GB cohesion were predicted based on their segregation and strengthening behaviors across the different GB sites. It reveals that the elements Ti, Zr, Hf, Nb, and Ta are good choices for the GB cohesion enhancers. In addition, the GB strengthening by solutes is sensitive to the GB structures. The elements Cr, Mn, Fe, Co, and Ni decrease the GB strength of the Σ3(111) GB but they can increase the cohesion of the Σ5(210) GB. Furthermore, the origin of Ti-induced change of the GB strength was uncovered by analyzing the atomic bonds and electronic structures as well as the tensile strength. This work provides a theoretical guidance to screen promising alloying elements in V-based materials with improved resistance to GB decohesion and also helps us to understand the formation mechanism of Ti-rich precipitates in the V-Cr-Ti alloys under neutron or ion irradiation environments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Off-resonant Raman quantum memory in impurity crystals: signal-to-noise ratio analysis

The possibility of implementing an off-resonant Raman scheme of optical quantum memory on the basis of an ensemble of three-level atoms is investigated under the condition of equal polarisations of resonant transitions forming the Λ-scheme. The developed model is used to analyse the signal-to-noise ratio at the output of an optical quantum memory device in {sup 143}Nd{sup 3+} : Y {sup 7}LiF{sub 4}. It is shown that this ratio can significantly exceed unity for single-photon input pulses. The required values of the parameters can be obtained by using an impurity crystal in the form of a whispering-gallery mode ring resonator. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Kinetics of the luminescence decay of Fe{sup 2+} impurity centres in polycrystalline ZnSe upon excitation by an electron beam

The kinetics of the decay of the luminescence of Fe{sup 2+} ions is measured at nitrogen temperature in polycrystalline ZnSe excited by a short pulse of accelerated electrons. The time dependence of the luminescence intensity differs from the exponential one, observed upon excitation of luminescence by a short light pulse. The obtained nonexponential dependence is theoretically described. The explanation is based on the quenching effect of the excited state of the Fe{sup 2+} ion by free electrons of the volume charge of the current of accelerated electrons in the sample (Auger effect). It was shown that the relaxation of the volume charge after the electron-accelerating voltage is removed makes a significant contribution to the decay kinetics of the impurity luminescence. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Avoidance of impurity-induced current quench using lower hybrid current drive

This work reports observations of a tokamak plasma that experienced a thermal quench due to a large, transient high-Z influx but avoided a current quench. This is argued to be caused by the presence of lower hybrid range of frequency (LHRF) waves that sustain a non-thermal, current-carrying electron population. In Alcator C-Mod L-mode plasmas at I p = 450 kA, n¯ e = 0.5 x 10 20 m –3 , nearly all of the current can be sustained non-inductively by injecting ≃700 kW of LHRF power at 4.6 GHz and n ∥ = 1.9. A sudden influx of a large amount of tungsten, n z /n e ≃ 0.0044, triggers a cooling wave that propagates at 2–3 m s –1 all the way into the core, dropping on-axis T e from 3 keV to temperatures less than measurement floor of 50 eV. An off-axis reheat begins after 100 ms, but T e profiles remain hollow for 300–350 ms after the injection. Throughout this temperature evolution, the plasma density, current and shape remain unchanged to within 10%. Following the expulsion of the tungsten, the plasma returns to its baseline conditions and the plasma ends as planned with a controlled current ramp-down. Energy balance analysis shows the LHRF power continues to be absorbed in the plasma after the thermal quench, as a significant fraction of it is needed to be consistent with radiated power measurements. Examination of current relaxation time, τ R , and fast-electron slowing down time, τ s , indicate the LHRF must contribute to driving current, despite the low temperatures, as the current remains nominally stationary despite τ R < 5 ms and τ s < 50 ms for relativistic electrons. Furthermore, these measurements represent an important existence proof of a possible technique for avoidance of disruptions caused by sudden, unplanned influx of impurities in the form of dust or flakes of high-Z wall material. Implications and suggestions for future experimental and modeling and simulation work are summarized.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interpretive modelling of boron transport in the boundary plasma of WEST experiments with the impurity powder dropper

Abstract Boron (B) powder injection is a potential alternative to glow discharge boronization as a wall conditioning method for tokamaks. This technique is currently being studied in WEST experiments, during which B powder is injected by an Impurity Powder Dropper developed by PPPL. In order to interpret and analyse experimental trends, and to help develop future experiments, a modelling workflow using a boundary plasma simulation (SOLEDGE-EIRENE) and powder ablation simulation (Dust Injection Simulator) was developed and tested. The effect of adding a B neutral source to simulated deuterium + oxygen (D + O) plasmas was compared to experimental data from the WEST C5 campaign, where B powder was injected in a dedicated experiment. While the impact of B injection on radiated power P rad measurements at the upper divertor was similar, there were significant differences in measurements of P rad , outer strike point electron temperature T e OSP and O-II line intensity at the lower divertor between experiment and simulation. This discrepancy suggests that those parameters were affected by phenomena not present in the simulations, with the most likely candidates being reduced D recycling and a reduced O sourcing from the divertor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterizing impurity sourcing and transport in the high temperature boundary of DIII-D wide pedestal QH-mode plasmas

Wide Pedestal QH-mode (WPQH) plasmas in the DIII-D tokamak show a sheath limited SOL, where electron density and temperature remain nearly constant along field lines from the midplane to the divertor. Consequently, parallel gradients are weak. The first Langmuir probe measurements in this regime point to a high sheath temperature with target electron temperature T e up to ~150 eV, leading to high carbon self-sputtering. Midplane carbon densities from SOLPS-ITER modeling of these plasmas in a double-null configuration fall far below experimental measurements unless full drifts are activated. In the drift-dependent SOLPS-ITER modeling, anomalous poloidally uniform, radially varying transport is adjusted to match measured radial electron temperature and density profiles in the pedestal and SOL region. The resulting carbon density (C6+) matches measured carbon densities just inside the separatrix. The C2+ density near the outer strike point is also consistent with spectroscopic imaging. With the ion B×∇B drift towards the X-point, carbon in the lower divertors is redistributed from the private flux region to the high field side (HFS) and pushed upstream in the SOL by poloidal E×B drifts. The B × ∇B drift dominates the radial flow of carbon as it moves upstream. Simulations with reversed toroidal field (ion B × ∇B drift away from the X-point) show a radically different behavior, where carbon accumulates on the low field side in lower divertors, and is pushed towards the HFS in the upper divertors, indicating a strong effect of particle drifts on impurity distribution. In double-null configurations which are usually used in WPQH plasmas, these drift effects tend to counterbalance, so that the carbon density and Z eff are reduced at the outer mid-plane only modestly, by around 7% in the modeling. Further predictive modeling indicates that the carbon density can be significantly reduced by an order of magnitude by implementing a single-null shape with reversed toroidal field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SICAS, a new integrated divertor-SOL-pedestal-core framework for self-consistent modeling of ion and impurity transport in fusion devices

We present a new framework for core-edge integration studies named SICAS (SOLPS-ITER coupled to ASTRA-STRAHL) which enables high fidelity simulations of the core, edge, and divertor regions encompassing the transport of ions as well as the impurities through the entire plasma domain. SICAS handles the exchanging of the particle and power fluxes as well as transport coefficients to ensure consistency through the codes. An overlapping region is defined from the inside of the separatrix of the plasma to the SOLPS-ITER core boundary allowing for matching profiles and fluxes between the two codes for a self-consistent approach. The results presented here demonstrated the flexibility of SICAS to simulate different configurations, scenarios, divertor geometries, and plasma species with good agreement with DIII-D experimental data. This tool opens new possibilities in integrated modeling of fusion devices integrating all relevant phenomena in the core and the divertor plasmas. These capabilities are required for the interpretation of current experiments as well as the design of new devices.

core-edge integration↗

Anderson impurity mechanism for a multi-level model in δ-Pu

Abstract Electronic correlations and spin–orbit interactions in plutonium create variations in the bonding behavior of each of its allotropes. In δ -Pu, the 5f electrons lie at the tipping point between itinerant and localized behavior which has made the use of mixed-level models successful in describing its mechanical properties. The mechanism for the emergence of a mixed-level model has not yet been understood. We use a series of density functional theory approximations to understand the interactions that create a mixed-level description of δ -Pu which leads to accurate physical properties. With the intersite interactions present in the hybrid functional, we show that a single 5f electron engages in orbital-selective bonding that can be understood with an Anderson impurity picture. The Anderson model gives us a mechanism to understand how the bonding in δ -Pu evolves as a function of the interactions in the material such that we obtain both the accuracy and physics of the multi-level models from ab initio theory.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Critical fields of superconductors with magnetic impurities

The upper critical field H c2 , the field H c3 for nucleation of the surface superconductivity, and the thermodynamic field H c are evaluated within the weak-coupling theory for the isotropic s-wave case with arbitrary transport, and pair-breaking scattering. In this study, we find that, for the standard geometry of a half-space sample in a magnetic field parallel to the surface, the ratio $\mathscr{R}$=H c3 /H c2 is within the window 1.55≲$\mathscr{R}$≲2.34 , regardless of temperature or the scattering type. While the nonmagnetic impurities tend to flatten the $\mathscr{R}$($\mathrm{T}$) variation, magnetic scattering merely shifts the maximum of $\mathscr{R}$($\mathrm{T}$) to lower temperatures. Surprisingly, while reducing the transition temperature, magnetic scattering has a milder impact on $\mathscr{R}$ than nonmagnetic scattering. The surface superconductivity is quite robust; in fact, the ratio $\mathscr{R}$≈1.7 even in the gapless state. We used Eilenberger's energy functional to evaluate the condensation energy F c and the thermodynamic critical field H c for any temperature and scattering parameters. By comparing H c2 and H c , we find that, unlike transport scattering, the pair-breaking pushes materials toward type-I behavior. Furthermore, we find a peculiar behavior of F c as a function of the pair-breaking scattering parameter at the low-$\mathrm{T}$ transition from gapped to gapless phases, which has recently been associated with the topological transition in the superconducting density of states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Feynman path-integral treatment of the BEC-impurity polaron

The description of an impurity atom in a Bose-Einstein condensate can be cast in the form of Froehlich's polaron Hamiltonian, where the Bogoliubov excitations play the role of the phonons. An expression for the corresponding polaronic coupling strength is derived, relating the coupling strength to the scattering lengths, the trap size and the number of Bose condensed atoms. This allows to identify several approaches to reach the strong-coupling limit for the quantum gas polarons, whereas this limit was hitherto experimentally inaccessible in solids. We apply Feynman's path-integral method to calculate for all coupling strengths the polaronic shift in the free energy and the increase in the effective mass. The effect of temperature on these quantities is included in the description. We find similarities to the acoustic polaron results and indications of a transition between free polarons and self-trapped polarons. The prospects, based on the current theory, of investigating the polaron physics with ultracold gases are discussed for lithium atoms in a sodium condensate.

74 ATOMIC AND MOLECULAR PHYSICS↗

Effects of metal impurities on the optical properties of polyethylene in the warm dense-matter regime

For the warm dense-matter regime, we have examined the effects on the equation of state, conductivity, and optical properties of the introduction of a metal impurity (Al) into a poorly conducting mixture (CH{sub 2}) by means of quantum molecular-dynamics simulations employing temperature-dependent density-functional theory for temperatures between 1 and 4 eV and densities from ambient solid to a few times compressed. The properties such as dc conductivity and Rosseland mean opacity exhibit significant departures from the pure CH{sub 2} results only for metal concentrations above about 50%. The system is representative of a wide range of environments that include planetary interiors, inertial confinement fusion capsules, and laser-produced plasmas.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Entanglement entropy and computational complexity of the periodically driven Anderson impurity model

We study the growth of entanglement entropy and bond dimension with time in density matrix renormalization group simulations of the periodically driven single-impurity Anderson model. The growth of entanglement entropy is found to be related to the ordering of the bath orbitals and to the relation of the driving period T to the convergence radius of the Floquet-Magnus expansion. Furthermore, ordering the bath orbitals by their Floquet quasienergy is found to reduce the exponential growth rate of the computation time at intermediate driving periods, suggesting new ways to optimize matrix product state calculations of driven systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hyperfine field and hyperfine anomalies of copper impurities in iron

A new value for the hyperfine magnetic field of copper impurities in iron is obtained by combining resonance frequencies from experiments involving {beta}-NMR on oriented nuclei on {sup 59}Cu, {sup 69}Cu, and {sup 71}Cu with magnetic moment values from collinear laser spectroscopy measurements on these isotopes. The resulting value, i.e., B{sub hf}(CuFe) = -21.794(10) T, is in agreement with the value adopted until now but is an order of magnitude more precise. It is consistent with predictions from ab initio calculations. Comparing the hyperfine field values obtained for the individual isotopes, the hyperfine anomalies in Fe were determined to be {sup 59{Delta}69}=0.15(9)% and {sup 71{Delta}69}=0.07(11)%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗