Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPINGEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Erosion in radial inflow turbines. Volume 4: Erosion rates on internal surfaces

An analytic study of the rate at which material is removed by ingested dust impinging on the internal surfaces of a typical radial inflow turbine is presented. Results show that there are several regions which experience very severe erosion loss, and other regions that experience moderate levels of erosion loss: (1) the greatest amount of material loss occurs on the trailing edges of the nozzle blades where very high velocity, moderate angle impacts occur. The tip regions of ductile materials are also subjected to serious levels of erosion loss; (2) moderate amounts of erosion occur near the end of the scroll and on a few of the nozzle blades near this location. Results are presented in the form of surface contours that exist on the scroll and blade surfaces after continuous particulate ingestion with time.

Clevenger, W. B., Jr.↗
NASA NTRS1975

User's guide and description of the streamline divergence computer program

The streamline divergence program was developed to demonstrate the capability to trace inviscid surface streamlines and to calculate outflow-corrected laminar and turbulent convective heating rates on surfaces subjected to exhaust plume impingement. The analytical techniques used in formulating this program are discussed. A brief description of the streamline divergence program is given along with a user's guide. The program input and output for a sample case are also presented.

Sulyma, P. R.↗
NASA NTRS1975

The Bulk Lunar Electrical Conductivity

The electrical conductivity structure was studied of a spherically layered moon consistent with the very low frequency magnetic data collected on the lunar surface and by Explorer 35. In order to obtain good agreement with the lunar surface magnetometer observations, the inclusion of a void cavity behind the moon requires a conductivity at shallow depths higher than that of models having the solar wind impinging on all sides. By varying only the source parameters, a conductivity model can be found that yields a good fit to both the tangential response upstream and the radial response downstream. This model also satisfies the dark side tangential response in the frequency range above 0.006 Hz, but the few data points presently available below this range do not seem to agree with the theory.

Leavy, Donald Lucien↗
NASA NTRS1975

Development of impact resistant boron/aluminum composites for turbojet engine fan blades

Composite fabrication was performed by vacuum press diffusion bonding by both the foil-filament array and preconsolidated monotape methods. The effect of matrix material, fiber diameter, matrix enhancement, fiber volume reinforcement, test temperature, angle-plying, notch, impact orientation, processing variables and fabrication methods on tensile strength and Charpy impact resistance are evaluated. Root attachment concepts, were evaluated by room and elevated temperature tensile testing, as well as by pendulum-Izod and ballistic impact testing. Composite resistance to foreign object damage was also evaluated by ballistic impacting of panels using projectiles of gelatin, RTV rubber and steel at various velocities, and impingement angles. A significant improvement in the pendulum impact resistance of B-Al composites was achieved.

Melnyk, P.↗
NASA NTRS1974

Wind tunnel test of model target thrust reversers for the Pratt and Whitney aircraft JT8D-100 series engines installed on a 727-200 airplane

The results of a low speed wind tunnel test of 0.046 scale model target thrust reversers installed on a 727-200 model airplane are presented. The full airplane model was mounted on a force balance, except for the nacelles and thrust reversers, which were independently mounted and isolated from it. The installation had the capability of simulating the inlet airflows and of supplying the correct proportions of primary and secondary air to the nozzles. The objectives of the test were to assess the compatibility of the thrust reversers target door design with the engine and airplane. The following measurements were made: hot gas ingestion at the nacelle inlets; model lift, drag, and pitching moment; hot gas impingement on the airplane structure; and qualitative assessment of the rudder effectiveness. The major parameters controlling hot gas ingestion were found to be thrust reverser orientation, engine power setting, and the lip height of the bottom thrust reverser doors on the side nacelles. The thrust reversers tended to increase the model lift, decrease the drag, and decrease the pitching moment.

Hambly, D.↗
NASA NTRS1975

A simulation study of active feedback supression of dynamic response in helicopter rotor blades

A parameter study is presented for active feedback control applied to a helicopter rotor blade during forward flight. The study was performed on an electromechanical apparatus which included a mechanical model rotor blade and electronic analog simulation of interaction between blade deflections and aerodynamic loading. Blade response parameters were obtained for simulated vortex impinging at the blade tip at one pulse per revolution, and for a pulse which traveled from the blade tip toward its root. Results show that the response in a 1 - 10-per-rev frequency band is diminished by the feedback action, but at the same time responses at frequencies above 10-per-rev become increasingly more prominent with increased feedback amplitude, and can even lead to instability at certain levels. It appears that the latter behavior results from limitations of the laboratory simulation apparatus, rather than genuine potential behavior for a prototype helicopter.

Kana, D. D.↗
NASA NTRS1975

Thermal/acoustical aircraft insulation material

Attempts made to improve the acoustical properties of low density Fiberfrax foam, an aircraft insulation material, are reported. Characterizations were also made of the physical and thermal properties. Two methods, optimization of fiber blend composition and modification of the foam fabrication process, were examined as possible means of improving foam acoustics. Flame impingement tests were also made; results show performance was satisfactory.

Struzik, E. A.↗
NASA NTRS1974

High performance N204/amine elements: Blowapart

The work is reported which was conducted to define the mechanisms governing blowapart of hypergolic propellant through the design, fabrication, test, and analysis of single element injectors. Data were developed that show the parameters exhibiting a controlling influence over blowapart are the chamber pressure, orifice diameter, and propellant temperature. Mixing, popping (cyclic blowapart), low pressure separation, and high pressure separation were identified as modes of reactive impingement.

Lawver, B. R.↗
NASA NTRS1974

An improved solution of the simplified two-phase plume

An exact solution of the two-phase, gas-particle, solid propellant rocket exhaust plume flowfield is presented. The good agreement between the exact solution and the experimental data proves that the accuracy of the present technique is acceptable for, at least, preliminary design calculations. A good comparison between the plume impingement effects predicted by the exact solution and those by the best computer code available has also been found for various propellant formulations and rocket sizes. This shows that the present exact solution does describe the basic characteristics of the two-phase plume. In case of a parametric analysis for obtaining an optimum design, the present exact solution will be a more convenient tool than any one of the numerical techniques especially when many parameters are involved in the optimization study. Several typical results are shown herein and their physical significance is discussed.

Wang, S. Y.↗
NASA NTRS1974

A boundary-layer analysis of atmospheric motion over a semi-elliptical surface obstruction

Flow over surface obstructions can produce adverse flying conditions for helicopters, V/STOL vehicles, etc. The disturbed boundary-layer concept is applied in approximating the localized flow field induced around a surface obstruction (modeled by a two-dimensional cylinder with elliptical cross section) by an impinging wind. The analysis concludes that: (1) localized wind-speed maxima occur at the top of a surface obstruction, which are expected in physically real flows; (2) increased elliptical aspect ratio decreases with speed within the boundary layer at the top of the ellipse; (3) increased surface roughness decreases velocity in the boundary layer; (4) Reynolds number has a negligible effect on the overall flow for the Re range considered; (5) decreased elliptical aspect ratio and increased surface roughness cause larger separation regions.

Frost, W.↗
NASA NTRS1974

Study of lubricant jet flow phenomena in spur gears

Review of the results of lubrication tests conducted in the NASA-Lewis Research Center gear test apparatus modified for high speed photography of gear tooth lubrication. The experimental results are compared with an analytical model that includes windage effects. The resulting findings show that the analytical model provides good agreement with the experimental impingement depth and that small oil drops are affected by gear windage. For this reason, the best lubrication is provided when the oil jet is not atomized.

Akin, L. S.↗
NASA NTRS1975

Noise radiation from turbulent flows over compliant surfaces

The present study is based on Lighthill-Curle's theory of aerodynamic noise. Using a correlation approach and the image concept of Powell, the volume contribution of turbulent flow over a large surface is approximated by a surface contribution of pressure fluctuations. Far-field noise intensities are expressed in terms of the surface pressure fluctuations and surface impedance. Based on available experimental measurements, numerical examples are performed for noise radiated from a turbulent boundary layer and from a normal jet impingement over rigid surfaces. Comparisons with available noise measurements are made. For general turbulent flows over compliant surfaces, measurements are suggested to obtain useful data for noise predictions.

Pan, Y. S.↗
NASA NTRS1975

Mathematical model of the current density for the 30-cm engineering model thruster

Mathematical models are presented for both the singly and doubly charged ion current densities downstream of the 30-cm engineering model thruster with 0.5% compensated dished grids. These models are based on the experimental measurements of Vahrenkamp at a 2-amp ion beam operating condition. The cylindrically symmetric beam of constant velocity ions is modeled with continuous radial source and focusing functions across 'plane' grids with similar angular distribution functions. A computer program is used to evaluate the double integral for current densities in the near field and to obtain a far field approximation beyond 10 grid radii. The utility of the model is demonstrated for (1) calculating the directed thrust and (2) determining the impingement levels on various spacecraft surfaces from a two-axis gimballed, 2 x 3 thruster array.

Cuffel, R. F.↗
NASA NTRS1975

Transients in a periodic slab - Coupled waves approach

The reflection and transmission of rectangular and Gaussian pulses impinging on a periodically stratified slab are studied and a number of examples are illustrated and analyzed. The coupled waves approach is used to derive the reflection and transmission coefficient, then the fast Fourier transform is used to illustrate the transient responses.

Elachi, C.↗
NASA NTRS1975

Performance of full size metallic and RSI thermal protection systems in a Mach 7 environment

The integrity and reusability of three flight-weight metallic and RSI thermal protection systems, designed for the Shuttle entry environment, have been demonstrated. Each model successfully survived over 23 entry thermal cycles without serious degradation. The metallic systems were more tolerant of the hostile environment and provided a higher degree of reusability than did the RSI. Thermal expansion slip joints of the metallic TPS successfully prevented hot gas ingress to the substructure. The RSI demonstrated high damage tolerance and field repairs increased its reusability. Heat-transfer tests to further assess RSI gap heating indicate that stacked tile orientations may impose a penalty on tile thickness. Parameters influencing RSI impingement heating were determined, and the heating data were correlated.

Bohon, H. L.↗
NASA NTRS1975

A study of the efficiency of various Navier-Stokes solvers

A comparative study of the efficiency of some finite difference methods for the solution of the Navier-Stokes equations was conducted. The study was restricted to the two-dimensional steady, uniform property vorticity-stream function equations. The comparisons were drawn by recording the CPU time required to obtain a solution as well as the accuracy of this solution using five numerical methods: central differences, first order upwind differences, second order upwind differences, exponential differences, and an ADI solution of the central difference equations. Solutions were obtained for two test cases: a recirculating eddy inside a square cavity with a moving top, and an impinging jet flow. The results show that whenever the central difference method is stable it generates results with a given accuracy for less CPU time than any other method.

Atias, M.↗
NASA NTRS1975

Cross-correlation methods for studying near- and farfield noise characteristics of flow-surface interactions

Systematic methods based on cross-correlation techniques are presented for experimental studies of near- and farfield noise characteristics in airflow-surface interaction problems. Analyses show that, in near- and farfields, the noise characteristics due to the surface contribution of fluctuating pressures and velocities and due to the volume contribution of the turbulence in the flow can be determined separately. Both farfield noise intensities and nearfield acoustic energy fluxes can be expressed in terms of appropriate cross correlations. These correlations can be obtained by making microphone measurements in the farfield, in the nearfield, and on the surface. Examples of the applications to the noise field generated by impinging jets, by surface blowing jets, and by turbulent flow over trailing edges are presented. Advantages of the present method over conventional methods are also discussed.

Pan, Y. S.↗
NASA NTRS1976

Simplified deflection-coil linearity testing

Mask placed over face of image-dissecting photomultiplier tube has precision array of pinholes that permit light to impinge on tube at known points. Signals are fed to deflection coil which sweeps beam across each point without complex operator procedures.

Kramer, G. P.↗