Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HEIGHTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Characteristics of surface roughness associated with leading edge ice accretion

Detailed size measurements of surface roughness associated with leading edge ice accretions are presented to provide information on characteristics of roughness and trends of roughness development with various icing parameters. Data was obtained from icing tests conducted in the Icing Research Tunnel (IRT) at NASA Lewis Research Center (LeRC) using a NACA 0012 airfoil. Measurements include diameters, heights, and spacing of roughness elements along with chordwise icing limits. Results confirm the existence of smooth and rough ice zones and that the boundary between the two zones (surface roughness transition region) moves upstream towards stagnation region with time. The height of roughness grows as the air temperature and the liquid water content increase, however, the airspeed has little effect on the roughness height. Results also show that the roughness in the surface roughness transition region grows during a very early stage of accretion but reaches a critical height and then remains fairly constant. Results also indicate that a uniformly distributed roughness model is only valid at a very initial stage of the ice accretion process.

Shin, Jaiwon↗
NASA NTRS1994

Cirrus cloud retrieval using infrared sounding data: Multilevel cloud errors

In this study we perform an error analysis for cloud-top pressure retrieval using the High-Resolution Infrared Radiometric Sounder (HIRS/2) 15-microns CO2 channels for the two-layer case of transmissive cirrus overlying an overcast, opaque stratiform cloud. This analysis includes standard deviation and bias error due to instrument noise and the presence of two cloud layers, the lower of which is opaque. Instantaneous cloud pressure retrieval errors are determined for a range of cloud amounts (0.1-1.0) and cloud-top pressures (850-250 mb). Large cloud-top pressure retrieval errors are found to occur when a lower opaque layer is present underneath an upper transmissive cloud layer in the satellite field of view (FOV). Errors tend to increase with decreasing upper-cloud effective cloud amount and with decreasing cloud height (increasing pressure). Errors in retrieved upper-cloud pressure result in corresponding errors in derived effective cloud amount. For the case in which a HIRS FOV has two distinct cloud layers, the difference between the retrieved and actual cloud-top pressure is positive in all cases, meaning that the retrieved upper-cloud height is lower than the actual upper-cloud height. In addition, errors in retrieved cloud pressure are found to depend upon the lapse rate between the low-level cloud top and the surface. We examined which sounder channel combinations would minimize the total errors in derived cirrus cloud height caused by instrument noise and by the presence of a lower-level cloud. We find that while the sounding channels that peak between 700 and 1000 mb minimize random errors, the sounding channels that peak at 300-500 mb minimize bias errors. For a cloud climatology, the bias errors are most critical.

Baum, Bryan A.↗
NASA NTRS1994

Suboptimal schemes for atmospheric data assimilation based on the Kalman filter

This work is directed toward approximating the evolution of forecast error covariances for data assimilation. The performance of different algorithms based on simplification of the standard Kalman filter (KF) is studied. These are suboptimal schemes (SOSs) when compared to the KF, which is optimal for linear problems with known statistics. The SOSs considered here are several versions of optimal interpolation (OI), a scheme for height error variance advection, and a simplified KF in which the full height error covariance is advected. To employ a methodology for exact comparison among these schemes, a linear environment is maintained, in which a beta-plane shallow-water model linearized about a constant zonal flow is chosen for the test-bed dynamics. The results show that constructing dynamically balanced forecast error covariances rather than using conventional geostrophically balanced ones is essential for successful performance of any SOS. A posteriori initialization of SOSs to compensate for model - data imbalance sometimes results in poor performance. Instead, properly constructed dynamically balanced forecast error covariances eliminate the need for initialization. When the SOSs studied here make use of dynamically balanced forecast error covariances, the difference among their performances progresses naturally from conventional OI to the KF. In fact, the results suggest that even modest enhancements of OI, such as including an approximate dynamical equation for height error variances while leaving height error correlation structure homogeneous, go a long way toward achieving the performance of the KF, provided that dynamically balanced cross-covariances are constructed and that model errors are accounted for properly. The results indicate that such enhancements are necessary if unconventional data are to have a positive impact.

Todling, Ricardo↗
NASA NTRS1994

High altitude molecular clouds

A population of molecular clouds with a significantly greater scale height than that of giant molecular clouds (GMCs) has been identified by examining maps of the latitude distribution of the (12)CO(1 - 0) emission in the first quadrant of the Galaxy. These clouds are found by identifying emission more than 2.6 times the scale-height away from the Galactic midplane (centroid of CO emission) at the tangent points. Since the distance to the tangent points is known, we know the heights and the sizes of these clouds. They are smaller and fainter than the GMCs and do not seem to be gravitationally bound. These clouds have properties similar to the high-latitude clouds in the solar neighborhood. Although they lie outside the molecular cloud layer, the high-altitude clouds are well within the H I layer in the Galaxy and coincide with distinct peaks in the H I distribution. These clouds represent a Galaxy-wide population of small molecular clouds having a larger scale height. They may be clouds in transition between molecular and atomic phases.

Malhotra, Sangeeta↗
NASA NTRS1994

Highly ionized gas in the Galactic halo

We reexamine the values of electron density n(sub e) and gas pressure P/k in the interstellar medium (ISM) of the Galactic halo, as inferred from C IV emission and absorption lines and using current C IV atomic data. In a homogeneous model with 4.7 less than or equal to log T less than or equal to 5.3, the data are consistent with 0.01 less than or equal to n(sub e) less than or equal to 0.02/cu cm and 2200 less than or equal to P/k less than or equal to 3700/cu cm K, a factor of 2-3 higher than advocated by Martin & Bowyer (1990) and comparable to the thermal pressure in the disk. If some of the C IV absorption arises from nonemitting, photoionized gas, then the inferred density and pressure will increase accordingly. The volume filling factor for homogeneous models ranges from 0.5% to 5%. Because of the constraints arising from filling factor and radiated power, most of the C IV must arise from gas near the peak of the cooling curve, at log t less than or equal to 5.6. We relate both emission-line and absorption-line observations to recent models in which turbulent mixing layers and isobarically cooling supernova remnants (SNRs) provide significant amounts of halo gas at approximately 10(exp 5.3) K and process 20-40 solar mass/yr with a power of approximately 10(exp 41) ergs/sec. Since the observed C IV and N V absorption scale heights have been reported to differ, at 4.9 kpc and 1.6 kpc, respectively, we examine inhomogeneous models with different exponential scale heights of T, P, and SN energy input. The ISM may change its character with distance above the Galactic plane, as superbubbles and mixing layers dominate over isolated SNRs as the source of the C IV. For appropiate scale heights, the midplane pressure is twice the homogeneous values quoted above. The O IV lambda 1034 diffuse emission line, which can be used as a temperature diagnostic of the hot gas, is predicted to be comparable in strength to that of C IV lambda 1549 (approximately 6000 photons/cu cm/s/sr. The ions C IV, N V, and O VI are predicted to show a decreasing trend in vertical extent, with the O IV scale height perhaps as low as approximately 1 kpc.

Shull, J. Michael↗
NASA NTRS1994

Atmospheric pressure loading effects on Global Positioning System coordinate determinations

Earth deformation signals caused by atmospheric pressure loading are detected in vertical position estimates at Global Positioning System (GPS) stations. Surface displacements due to changes in atmospheric pressure account for up to 24% of the total variance in the GPS height estimates. The detected loading signals are larger at higher latitudes where pressure variations are greatest; the largest effect is observed at Fairbanks, Alaska (latitude 65 deg), with a signal root mean square (RMS) of 5 mm. Out of 19 continuously operating GPS sites (with a mean of 281 daily solutions per site), 18 show a positive correlation between the GPS vertical estimates and the modeled loading displacements. Accounting for loading reduces the variance of the vertical station positions on 12 of the 19 sites investigated. Removing the modeled pressure loading from GPS determinations of baseline length for baselines longer than 6000 km reduces the variance on 73 of the 117 baselines investigated. The slight increase in variance for some of the sites and baselines is consistent with expected statistical fluctuations. The results from most stations are consistent with approximately 65% of the modeled pressure load being found in the GPS vertical position measurements. Removing an annual signal from both the measured heights and the modeled load time series leaves this value unchanged. The source of the remaining discrepancy between the modeled and observed loading signal may be the result of (1) anisotropic effects in the Earth's loading response, (2) errors in GPS estimates of tropospheric delay, (3) errors in the surface pressure data, or (4) annual signals in the time series of loading and station heights. In addition, we find that using site dependent coefficients, determined by fitting local pressure to the modeled radial displacements, reduces the variance of the measured station heights as well as or better than using the global convolution sum.

Vandam, Tonie M.↗
NASA NTRS1993

A regional simulation of marine boundary-layer clouds

A regional version of a two-layer model is used to simulate marine boundary-layer clouds over an area (20 deg - 42 deg and 117 - 145 deg W) of the eastern North Pacific. The large-scale conditions requried for the model are provided by European Centre for Medium-Range Weather Forecasts analyses and the Comprehensive Ocean-Atmosphere Data Set. The simulated cloud-top height and fractional cloudiness are compared with satellite data. The model predicts a realistic pattern of cloud-top height, although the heights appear to be overestimated in the southwest and underestimated along the eastern border of the domain. The overall simulated cloudiness is qualitatively comparable to the satellite derived, but the model predicts excessive cloudiness over cold ocean surfaces and insufficient cloudiness over an area centered at 30 deg N, 130 deg W. The possible causes for these discrepancies are discussed. Budget studies show that horizontal advection contributes substantially to the cloud-top height and cloud-layer moisture budgets. Thus, one may need to consider the effects of horizontal advection when validating steady-state solutions of a one-dimensional model. The simulated cloudiness is shown to be sensitive to large-scale subsidence, moisture above the clouds, and drizzle. An increase in the large-scale divergence by 2 x 10(exp -6)/sec decreases average cloudiness for the area by 30%. An increase in the moisture at 850 mb by 2 g/kg increases the cloudiness by 20%. The suppression of drizzle in the model increases the cloudiness by 34% and significantly changes its pattern.

Wang, Shouping↗
NASA NTRS1996

Wind tunnel test results of a 1/8-scale fan-in-wing model

A 1/8-scale model of a fan-in-wing concept considered for development by Grumman Aerospace Corporation for the U.S. Army was tested in the Langley 14- by 22-Foot Subsonic Tunnel. Hover testing, which included height above a pressure-instrumented ground plane, angle of pitch, and angle of roll for a range of fan thrust, was conducted in a model preparation area near the tunnel. The air loads and surface pressures on the model were measured for several configurations in the model preparation area and in the tunnel. The major hover configuration change was varying the angles of the vanes attached to the exit of the fans for producing propulsive force. As the model height above the ground was decreased, there was a significant variation of thrust-removed normal force with constant fan speed. The greatest variation was generally for the height-to-fan exit diameter ratio of less than 2.5; the variation was reduced by deflecting fan exit flow outboard with the vanes. In the tunnel angles of pitch and sideslip, height above the tunnel floor, and wind speed were varied for a range of fan thrust and different vane angle configurations. Other configuration features such as flap deflections and tail incidence were evaluated as well. Though the V-tail empennage provided an increase in static longitudinal stability, the total model configuration remained unstable.

Wilson, John C.↗
NASA NTRS1995

Interdecadal Variations in the Alaska Gyre

Climatic dynamic topography variations in the Alaska gyre during the period 1968-1990 are described with an objective analysis of more than 12000 STD and XBT stations, and COADS wind stress data Interannual the dynamic height and SST variations were correlated and were consistent with recently described large-scale climatic shifts in the North Pacific. The gyre was centered more to the east, circulation appeared stronger, and SST was lower during the early to mid-1970s than during the 1980s. The Aleutian low (NP and PNA indices) intensified during the interim, but the response did not appear as a gyre spinup. Instead, the associated wind stress anomalies forced a slowly varying dynamic height anomaly across the eastern and northern part of the gyre through Ekman convergence, which had the effect of displacing the gyre's low somewhat to the WSW in the 1980s. The wind curl spectrum was white, and the slow oceanic response was modeled as stochastic-forced climate variability with a simple first-order Markov autoregression process. Forcing was assumed to be Ekman pumping of the pycnocline, and the damping coefficient was estimated from the data to be approx. 1 yr. A hindcast with observed winds gave estimated dynamic height patterns similar to those observed, with a canonical correlation of 0.79 at 99% confidence. This response was weak in the western half of the gyre, where slow baroclinic variability may have been influenced by long Rossby wave propagation. A simple autoregression simulation using artificial white noise forcing shows the evolution of decadal variations similar in nature to those observed. This result, along with the low frequency correlation between dynamic height and SST, suggests that the upper-ocean climatic variability in this region is primarily wind forced.

Lagerloef, Gary S.E.↗
NASA NTRS1996

First Results of the TOPSAR C-Band / L-Band Interferometer: Calibration and Differential Penetration

The NASA/JPL TOPSAR instrument recently was extended from a single wavelength C-band dual aperture synthetic aperture radar (SAR) interferometer to include a second wavelength at the L-band. Adding the second wavelength invites comparison of wavelength-diverse effects in topographic mapping of surfaces, with the principal goal of understanding the penetration of the radar signals in vegetation canopies, and determining the inferred topographic height. A first analysis of these data was conducted at two sites. Elkhorn Slough near Monterey, California presented flat, vegetation free terrain required for calibrating the radar interferometer parameters. A second site stretching from San Jose to Santa Cruz, California, which is heavily vegetated, provided the first test case for wavelength diverse penetration studies. Preliminary results show that: (a) the interferometer calibration determined at Elkhorn Slough is extenable to Laurel Quad and gives confidence in the C- and L-band height measurements; (b) Clear differences were observed between the C- and L-band heights associated with vegetation, with the C-band derived topographic heights generally higher than those from L-band. The noise level in the L-band interferometer is presently the limiting factor in penetration studies.

Rosen, Paul A.↗
NASA NTRS1997

Characteristics of Non-Premixed Turbulent Flames in Microgravity

The overall objectives of this research are: (1) to obtain and analyze experimental data on flame images, and the spatial and temporal distributions of temperature, radiation, velocity and gas-phase species in microgravity turbulent gas-jet diffusion flames; and (2) to utilize these data to validate and refine the existing predictive capabilities. Work on this project commenced in June 1996. The first investigations on turbulent gas-jet diffusion flames in microgravity were initiated by Bahadori and co-workers in 1991. These studies have shown that significant differences exist in the transition processes in normal-gravity and microgravity flames, and that the turbulent flames in microgravity behave very differently as compared to their buoyancy-dominated normal-gravity counterparts. For example, in the transition regime while the visible flame height, for given fuel and nozzle size, in normal gravity decreases, the height of the microgravity flame increases. In the fully developed turbulent regime, the normal-gravity flame height is independent of injection velocity, whereas the microgravity flame height continues to increase, although at a lower rate than in the laminar and transitional regimes. Other differences between the normal-gravity and microgravity flames arise in the jet shear-layer instability characteristics, extent of the transitional regime and blow-off limit characteristics.

Hegde, Uday↗
NASA NTRS1992

On the Retrieval and Analysis of Multilevel Clouds

An accurate satellite retrieval of cloud properties depends upon the detection and analysis of multilayered, overlapping cloud systems that surface observations show to be common. Multiple cloud layers are often found, for instance, in frontal situations, where cirrus overlays boundary layer convective cloud or low-to mid-level stratus cloud. Surface observers (Hahan et al., 1982) indicate that over ocean in the Northern Hemisphere between 30 deg. N and 60 deg. N, 51 percent of observations are of multilevel clouds. A satellite analysis by Coakley (1983) over the Pacific Ocean finds that more than 50 percent of 500 (250 sq km) frames exhibit evidence of multilayered cloud systems. The questions addressed in this study are the following: What error is introduced when inferring the cloud pressure from a Field-Of-View (FOV) that contains some arbitrary amount of transparent cloud overlaying a lower-level black cloud, such as stratus, by making the assumption that there is only a single cloud layer in the FOV, and what may be done to improve the cloud retrieval? The CO2 slicing methods (e.g. McCleese and Wilson, 1976; Smith and Platt, 1978; Chahine, 1974) have been shown to provide accurate means of inferring cirrus cloud altitude from passive infrared radiance measurements. The CO2 techniques have been applied to radiometric data from several instruments, notably the High Resolution Infrared Radiometric Sounder (HIRS/2, hereafter referred to as HIRS), the VISSR Atmospheric Sounder (VAS) (e.g., Menzel et al., 1983; Wylie and Menzel, 1989), and most recently to the High Resolution Interferometer Sounder (HIS) (Smith and Frey, 1990). The methods take advantage of the fact that infrared CO2 sounding channels spaced closely in wavenumber each have varying opacity to CO2, thereby causing each channel to be sensitive to a different level in the atmosphere. The techniques have been shown to be effective for single-layered, nonblack, mid- to high-level clouds such as cirrus, but are generally applied operationally to any given cloud occurrence. The CO2 slicing algorithms are most accurate for clouds than occur in a single, well-defined layer, or for multi-layered cloud cases in which the uppermost cloud layer is nearly black. Significant cloud height retrieval errors may ensue if the HIRS Field-Of-View (FOV) is cotaminated with low cloud. McCleese and Wilson (1976) have shown that the retrieved cloud height for the case of multiple cloud layers is a weighted average of the cloud heights actually present. The weight is approximately proportional to the product of the cloud heigt and the effective cloud amount. The effect of their result is that the uppermost cloud layer dominates the cloud pressure retrieval. Beyond stating that the higher cloud dominates the cloud pressure retrieval, there is no quantitative information to provide a way of estimating the errors in cloud pressure retrieval one should expect for certain common multilevel cloud situations or any suggestions on how to reduce the errors. In this paper we estimate the magnitude of the errors and use a simple algorithm to reduce the errors in optically thin cloud height retrival.

Baum, Bryan A.↗
NASA NTRS1996

First Results of the TOPSAR C-Band/L-Band Interferometer: Calibration and Differential Penetration

The NASA/JPL TOPSAR instrument recently was extended from a single- wavelength C-band (5.6 cm-lambda) dual aperture synthetic aperture radar interferometer to include a second wavelength at L-band (24 cm). Adding the second wavelength invites comparison of wavelength-diverse effects in topographic mapping of surfaces, with the principal goal of understanding the penetration of the radar signals in vegetation canopies, and determining the inferred topographic height. A first analysis of these data was conducted at two sites. Elkhorn Slough near Monterey, California presented flat, vegetation free terrain required for calibrating the radar interferometric parameters. A second site stretching from San Jose to Santa Cruz, CA, which is heavily vegetated, provided the first test case for wavelength diverse penetration studies. Preliminary results show that: (a) the interferometer calibration determined at Elkhorn Slough is extendable to Laurel Quad and gives confidence in the C- and L-band height measurements; and (b) Clear differences are observed between the C- and L-band heights associated with vegetation, with C-band-derived topographic heights generally higher than those from L-band. The noise level in the L-band interferometer is presently the limiting factor in penetration studies.

Rosen, Paul A.↗
NASA NTRS1961

Interaction of Highly Underexpanded Jets with Simulated Lunar Surfaces

Pressure distributions and erosion patterns on simulated lunar surfaces (hard and soft) and interference effects between the surface and two representative lunar vehicles (cylindrical and spherical) were obtained with cold-air jets at various descent heights and nozzle total-pressure ratios up to 288,000. Surface pressure distributions were dependent on both nozzle area ratio and, nozzle contour. Peak pressures obtained with a sonic nozzle agreed closely with those predicted theoretically for a near-sonic jet expanding into a vacuum. Short bell-shaped nozzles gave annular pressure distributions; the low center pressure resulted from the coalescence of shocks that originated within the nozzle. The high surface pressures were contained within a circle whose diameter was about 16 throat diameters, regardless of nozzle area ratio or contour. The peak pressure increased rapidly as the vehicle approached the surface; for example, at a descent height of 40 throat diameters the peak pressure was 0.4 percent of the chamber pressure, but increased to 6 percent at 13 throat diameters. The exhaust jet eroded a circular concave hole in white sand at descent heights from about 200 to 600 throat diameters. The hole diameter was about 225 throat diameters, while the depth was approximately 60 throat diameters. The sand particles, which formed a conical sheet at a semivertex angle of 50 deg, appeared to follow a ballistic trajectory and at no time struck the vehicle. An increase in pressure was measured on the base of the cylindrical lunar vehicle when it approached to within 14 throat diameters of the hard, flat surface. No interference effects were noted between the spherical model and the surface to descent heights as low as 8 throat diameters.

Stitt, Leonard E.↗
NASA NTRS1980

Effects of Adverse Pressure Gradient on the Incompressible Reattaching Flow Over a Rearward-Facing Step

The turbulent, incompressible reattaching flow over a rearward-facing step has been studied by many researchers over the years. One of the principal quantities determined in these experiments has been the distance from the step to the point (or region) where the separated shear layer reattaches to the surface (x(r)). The values for x(r)/h, where h is the step height, have covered a wider range than can reasonably be attributed to experimental technique or inaccuracy. Often the reason for a largely different value of x(r)/h can be attributed to an incompletely developed turbulent layer, or a transitional or laminar boundary layer. However, for the majority of experiments where the boundary layer is believed to be fully developed and turbulent, x(r)/h still varies several step heights; generally, 5 1/2 approximately < x(r)/h approximately < 7 1/2. This observed variation has usually been attributed to such variables as l/h (step length to height, h/delta (step height to initial boundary-layer thickness), R(e)(theta)), or the experimental technique for determining reattachment location. However, there are so many different combinations of variables in the previous experiments that it was not possible to sort out the effects of particular conditions on the location of reattachment. In the present experiment velocity profiles have been measured in and around the region of separated flow. Results show a large influence of adverse pressure gradient on the reattaching flow over a rearward-facing step that has not been reported previously. Further, the many previous experiments for fully developed, turbulent flow in parallel-walled channels have shown a range of reattachment location that has not been explained by differences in initial flow conditions. Although these initial flow conditions might contribute to the observed variation of reattachment location, it appears that the pressure gradient effect can explain most of that variation.

Kuehn, Donald M.↗
NASA NTRS1999

Characteristics of Non-Premixed Turbulent Flames in Microgravity

The momentum of the fuel (and/or air) jet is important in classifying gas-jet diffusion flame behavior. Normal-gravity data on gas-jet flames show that the flame height (non-dimensionalized with respect to an effective diameter) can be correlated to a density weighted Froude number in the buoyancy-dominated limit. In the momentum-dominated limit this non-dimensional flame height asymptotes to a constant value. The momentum-dominated limit under normal gravity conditions is usually obtained for very high injection velocities which in turn results in high values of the injection Reynolds number. This results in a complicated flame structure because of the large number of turbulence scales involved. In order to gain better insight into the structure of these flames it would be useful to reduce the injection Reynolds number while still maintaining turbulent conditions. This can be done in microgravity where momentum-dominated turbulent flames are obtained at much smaller velocities than in normal gravity. In this paper, experimental results on the effects of nozzle diameter and fuel dilution on flame height are discussed. The experimental values are compared with predictions from a numerical procedure utilizing the standard k-epsilon turbulence model. Flame height scaling with nozzle size and dilution is established. Differences between model predictions and measurements are presented. In order to explain these differences, evolutions of turbulent spectra and Taylor microscale along the flame axis are considered.

Hegde, U.↗
NASA NTRS1999

Tilt Modulation Distortions in Wave Topography Measured by a Scanning Radar Altimeter

Work continues on estimating tilt modulation distortions in the wave topography measured by a scanning radar altimeter. To quantify this effect, a two-dimensional simulation has been performed in the cross-track plane only which assumed that sinusoidal waves of constant wavelength propagate in the cross-track direction (and are infinitely long-crested in the along-track direction). The initial results reported earlier for a Gaussian surface scattering model indicated that when the highest reasonable value of mss is used in the simulation (the Plant limit of 0.08), the nadir values of the ratio of the apparent to actual wave height are the same as for the omnidirectional scattering case. But as the off-nadir angle increased, the apparent wave height increased and became larger than the actual wave height by about 10 degrees off-nadir. And the shorter the wavelength, the larger the apparent wave height increase. This represented a systematic over-estimate of the wave amplitude for waves propagating in the cross-track direction. For lower values of mss the situation worsened. The simulation has been improved by incorporating actual variations of backscattered power with incidence angle measured by the SRA instead of the Gaussian model. The resulting distortion was about half that originally reported. The 3-dimensional simulation to model waves propagating at various azimuthal angles relative to the cross-track plane is still in progress. The results of this model will be verified by comparing them with Scanning Radar Altimeter (SRA) data and optimum correction procedures will be developed. An assessment of the improved 2-dimensional model indicates that the distortion will generally be small in the data taken during the Southern Ocean Waves Experiment (SOWEX) presently be analyzed. But tilt modulation effects are of great concern for SRA data collected during the 1998 hurricane season since the minimum aircraft altitude was 1.5 km and it frequently flew higher. For a given wave length and steepness, the effect increases with increasing aircraft altitude, and is larger for waves propagating in the cross-track direction, which was generally the situation during the hurricane flights.

Walsh, Edward J.↗
NASA NTRS1999

Hurricane Directional Wave Spectrum Spatial Variation in the Open Ocean

The sea surface directional wave spectrum was measured for the first time in all quadrants of a hurricane in open water using the NASA airborne scanning radar altimeter (SRA) carried aboard one of the NOAA WP-3D hurricane hunter aircraft at 1.5 km height. The SRA measures the energetic portion of the directional wave spectrum by generating a topographic map of the sea surface. At 8 Hz, the SRA sweeps a radar beam of 1 deg half-power width (two-way) across the aircraft ground track over a swath equal to 0. 8 of the aircraft height, simultaneously measuring the backscattered power at its 36 GHz (8.3 mm) operating frequency and the range to the sea surface at 64 positions. These slant ranges are multiplied by the cosine of the incidence angles to determine the vertical distances from the aircraft to the sea surface. Subtracting these distances from the aircraft height produces the sea surface elevation map. The sea surface topography is interpolated to a uniform grid, transformed by a two-dimensional FFT, and Doppler corrected. The data presented were acquired on 24 August 1998 when hurricane Bonnie was east of the Bahamas and moving slowly to the north. Wave heights up to 18 m were observed and the spatial variation of the wave field was dramatic. The dominant waves generally propagated at significant angles to the downwind direction and at times there were wave fields traveling at right angles to each other. The NOAA aircraft spent over five hours within 180 km of the hurricane Bonnie eye, and made five eye penetrations. A 2-minute animation of the directional wave spectrum spatial variation over this period will be shown.

Wright, C. W.↗