Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Gas sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Wind tunnel mass spectrometer design study

The sampling probe to measure the free stream gas composition in a hypersonic wind tunnel is described. Using a free expansion of the continuum flow, a series of sampling inlet-pumping stages is evaluated. Mass analysis is carried out with a quadrupole mass spectrometer employing a crossed electron beam, molecular beam ion source, and an off-axis electron multiplier. The spatial distribution of the sampled molecular flux and the pumping requirements are evaluated for varying inlet conditions of gas density and flow velocity. The signal-to-noise ratio of the molecular beam formed by this series of coaxial inlets is also determined. The signal-to-noise ratio of the unscattered flux is sufficiently high that an unambiguous determination of the beam composition and of the free stream gas properties can be made. The magnitude of the detected signal is sufficiently high that measurement of trace constituents two orders of magnitude below the primary beam signal can be made.

Hueser, J. E.↗
DOE OSTI2020

Mercury speciation using microcolumns with a direct mercury analyzer (DMA). Development of analytical method for the Savannah River Site liquid system

Mercury in the Savannah River Site (SRS) Liquid Waste System (LWS) exists in various forms, including: a) ionic inorganic mercury, organomercury (e.g., methyl Hg), and other less abundant species dissolved in LWS fluids, b) mercury solids such as oxides, hydroxides, amalgams, sulfides, and sorbed mercury, c) accumulations of dense liquid elemental mercury, and d) vapor phase elemental and organomercury mercury in tank headspace gas and in evaporators. Strategic and proactive management of the estimated 60,000 Kg mercury in the LWS requires deployment of efficient and effective paradigms for sampling and analysis of the total quantity of mercury in the various physical-chemical forms. Scoping tests of selective gas-phase sorbents for mercury speciation were performed to support LWS objectives. This research specifically focused on developing and testing streamlined methods to obtain high-quality analytical results for gaseous mercury species. The proposed methods are straightforward, using small columns (microcolumns) filled with materials that selectively sorb one or more target forms of mercury. Simple differentiation of mercury species and quantification is then achieved using an efficient thermal-desorption-based total mercury analyzer as the final step. Benefits associated with transitioning from multistep procedures such as EPA Methods 245.1, 1630 and 1631to streamlined microcolumn approaches include reduced analysis time, labor, and waste generation. Such transitioning would maximize the value of the current deployment of direct mercury analysis (EPA Method 7473) at SRS. This work has two target end uses: 1) simplifying the analysis steps and reducing costs for liquid samples (e.g., developing a total organic mercury (TOM) method), and 2) providing options for high-quality onsite analysis and rapid turnaround for gas samples in support of SRS LWS industrial hygiene (IH) objectives.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1999

Optical Imaging of Flow Pattern and Phantom

Time-resolved optical imaging technique has been used to image the spatial distribution of small droplets and jet sprays in a highly scattering environment. The snake and ballistic components of the transmitted pulse are less scattered, and contain direct information about the sample to facilitate image formation as opposed to the diffusive components which are due to multiple collisions as a light pulse propagates through a scattering medium. In a time-gated imaging scheme, these early-arriving, image-bearing components of the incident pulse are selected by opening a gate for an ultrashort period of time and a shadowgram image is detected. Using a single shot cooled CCD camera system, the formation of water droplets is monitored as a function of time. Picosecond time-gated image of drop in scattering cells, spray droplets as a function of let speed and gas pressure, and model calcification samples consisted of calcium carbonate particles of irregular shapes ranging in size from 0. 1 to 1.5 mm affixed to a microscope slide have been measured. Formation produced by an impinging jet will be further monitored using a CCD with 1 kHz framing illuminated with pulsed light. The desired image resolution of the fuel droplets is on the 20 pm scale using early light through a highly scattering medium. A 10(exp -6)m displacement from a jet spray with a flow speed of 100 m/sec introduced by the ns grating pulse used in the imaging is negligible. Early ballistic/snake light imaging offers nondestructive and noninvasive method to observe the spatial distribution of hidden objects inside a highly scattering environment for space, biomedical, and materials applications. In this paper, the techniques we will present are time-resolved K-F transillumination imaging and time-gated scattered light imaging. With a large dynamic range and high resolution, time-gated early light imaging has the potential for improving rocket/aircraft design by determining jets shape and particle sizes. Refinements to these techniques may enable drop size measurements in the highly scattering, optically dense region of multi-element rocket injectors. These types of measurements should greatly enhance the design of stable, and higher performing rocket engines.

Galland, Pierre A.↗
DOE OSTI2025

In-situ ion irradiation of fission products in a spent UO 2 fuel

This study investigates the behavior of fission gas bubbles and five metal precipitates (5MPs) (Mo, Ru, Rh, Tc, Pd) in spent uranium dioxide (UO 2 ) fuel under various ion irradiation doses, temperatures, and flux conditions. Utilizing in-situ ion irradiation and advanced transmission electron microscopy, we analyzed the evolution of fission gas bubbles and 5MPs in UO 2 samples from the Belgium Reactor 3 (BR-3). Our findings reveal significant shrinkage of fission gas bubbles and 5MPs with increasing irradiation dose, accompanied by a decrease in pair density. We demonstrate that ion irradiation induces a homogeneous re-solution process where individual atoms are ejected from bubbles and precipitates, leading to their dissolution and subsequent re-precipitation in the matrix. In conclusion, this study provides critical insights into the dynamic behavior of fission products under irradiation, facilitating the development of predictive models and contributing to the optimization of nuclear fuel performance and safety.

Fission products↗
DOE OSTI2021

An improved specimen preparation method for marine shallow gas-bearing sand sediments and its validations

Instabilities of shallow gas-charged seabed are potential geological hazards in ocean engineering. In practice, the conventional field sampling techniques failed to obtain undisturbed gas-bearing sediments from the seabed for laboratory mechanical testing because of sensitive gas exsolution and escape from sediments. However, preparation of representative remoulded gas-charged specimens is a challenging issue, because it is rather difficult to quantitatively control the gas content and obtain uniform distribution of gas bubbles within the specimen. Given the above problems, this work proposes a reliable approach to reconstitute the high-saturation specimen of gas-charged sediments in the laboratory by an improved multifunction integrated triaxial apparatus (MITA). This apparatus is developed based on an advanced stress path triaxial system by introducing a temperature-controlled system and a wave-monitoring system. The temperature-controlled system is used to accurately mimic the in situ environments of sediments in the seabed. The wave-monitoring system is utilized to identify exsolution point of free gas and examine the disturbance of gas to specimens during gas exsolution. The detailed procedure of gassy specimen preparation is introduced. Then, the quality of prepared specimens using our improved apparatus is validated by the high-resolution micro-X-ray computed tomography (μCT) scanning test, from which bubble occurrence and size distribution within the gassy sand specimen can be obtained; and preliminary mechanical tests on gassy sand specimens with various initial saturation degrees are performed. The proposed specimen preparation procedure succeeds in proving the postulated occurrence state of gas bubbles in coarse-grained sediments and accurately controlling the gas content.

58 GEOSCIENCES↗
DOE OSTI2024

Mid-IR UAV-based sensing platform with deep learning to Identify and Quantify Gaseous Emission in Gas Flares

This report details the development and evaluation of a Mid-Infrared (Mid-IR) Unmanned Aerial Vehicle (UAV)-based sensing platform integrated with deep learning algorithms for the identification and quantification of gaseous emissions in gas flares. The project, spearheaded by Omega Optics, Inc., aimed to address environmental monitoring challenges by leveraging advanced photonic technologies and autonomous UAV operations. The research focused on designing, optimizing, and fabricating photonic crystal waveguides and grating couplers to enhance the sensitivity and accuracy of gas detection. A comprehensive drone-based system was developed, featuring a miniaturized sensor, GPS module, and microcontroller communication network for real-time gas concentration monitoring. The system's adaptive sampling algorithm, implemented using the Robot Operating System (ROS), enables autonomous detection and localization of gas emission sources. Preliminary results demonstrate the platform's capability to detect and monitor gas emissions with high precision, cost-effectiveness, and scalability. Future work will expand upon this foundation by introducing 3D wind model-based learning for dynamic environmental conditions and further enhancing the user interface and data processing algorithms to support broader environmental monitoring applications. Overall, this project represents a significant step forward in UAV-based environmental sensing technologies, offering robust solutions for detecting and mitigating the impacts of gaseous emissions on public health and safety.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

In-situ ion irradiation of a spent UO2 fuel: evolution of fission products and nanograins with radiation dose

This study investigates the behavior of fission gas bubbles, five metal precipitates (5MPs) (Mo, Ru, Rh, Tc, Pd) and nanograins in spent uranium dioxide (UO2) fuel under various ion irradiation doses, temperatures, and flux conditions. Utilizing in-situ ion irradiation and advanced transmission electron microscopy, we analyzed the evolution of fission gas bubbles, 5MPs and nanograins in UO2 samples from the Belgium Reactor 3 (BR-3). Our findings reveal significant shrinkage of fission gas bubbles and 5MPs with increasing irradiation dose, accompanied by a decrease in pair density. The study also reveals nanograin coarsening under irradiation. We demonstrate that ion irradiation induces a homogeneous re-solution process where individual atoms are ejected from bubbles and precipitates, leading to their dissolution and subsequent re-precipitation in the matrix. This study provides critical insights into the dynamic behavior of fission products and nanograins under irradiation, facilitating the development of predictive models and contributing to the optimization of nuclear fuel performance and safety.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1975

Rare gases in etched 10084 ilmenite - A search for trapped solar-flare rare gases

Results are presented of rare-gas analyses of 10084 ilmenite samples which have been etched to depths of about 1 micrometer in an attempt to remove the surface layer of trapped solar-wind gases, thereby allowing detection of the more deeply implanted solar-flare ions in the remaining trapped gases. A tendency found for the Ne-20/Ne-22 ratios in the etched ilmenite to reflect the solar-wind ratio measured in the solar-wind composition experiment foils may represent a cancellation of mass-fractionation effects. The Ne-20/Ne-22 ratio in the saturated layer is lowered with respect to the solar wind by preferential diffusive loss, but is raised again in the gas diffusing inward by the same preferential mobilization of Ne-20 relative to Ne-22. Attention is also given to the significance of the findings in the case of argon, krypton, and xenon.

Leich, D. A.↗
DOE OSTI2025

Intrinsic Kinetics of Polyethylene Terephthalate Pyrolysis via Micropyrolysis and Multivariate Chromatographic Analysis

This study provides an in-depth investigation of the primary decomposition of polyethylene terephthalate (PET) via pyrolysis, employing an experimental-analytic workflow that integrates design of experiments (DoE), micropyrolysis coupled with comprehensive two-dimensional gas chromatography (GC×GC), and multivariate data analysis to verify intrinsic kinetic conditions and elucidate evolving product distributions for mapping key reaction pathways. Peaks that could not be identified using commercial spectral libraries were assigned using Mass Frontier simulations, enabling the identification of divinyl terephthalate, ethyl vinyl terephthalate, and 2-(benzoyloxy)ethyl vinyl terephthalate. A polar×polar (non-orthogonal) column set tailored for the detection of carboxylic acids enhanced the quantification of benzoic acid, 4-vinylbenzoic acid, 4-ethylbenzoic acid, and methylbenzoic acid by up to 6-fold relative to an orthogonal column combination (non-polar×mid-polar). Moreover, pyrolysis variables were systematically evaluated using a Box- Behnken design (BBD), encompassing pyrolysis temperature (500−600 °C), sample weight (50−150 μg), and carrier gas flow rate (100−300 mL min −1 ). Among these, pyrolysis temperature was the only statistically significant factor influencing product yields, ranging from 58.78 to 84.26 wt %. In contrast, neither the sample weight nor the carrier gas flow rate had a significant effect on product yields within the evaluated experimental space. At 600 °C, the major pyrolysis products were benzoic acid (up to 20.20 ± 1.46 wt %) and CO 2 (up to 21.28 ± 1.46 wt %), which can be produced through decarboxylation reactions. These findings underscore the critical importance of selecting appropriate analytical columns for the accurate quantification of heteroatomcontaining products such as carboxylic acids, which may otherwise be underestimated or undetected due to their reactivity with the stationary phase of non-polar and mid-polar columns, as well as other GC components. They also highlight the importance of selecting pyrolysis conditions for investigating the primary decomposition of PET under an isothermal kinetically limited regime.

aromatic compounds↗
DOE OSTI2020

Evaluation of Radiolysis Data for Hydrogen Gas Generation During Gamma Irradiation of Pre-Corroded and Pristine Aluminum Samples - An Aluminum SNF Dry Storage Study Interim Report

Information and data from radiolysis testing to measure hydrogen (H₂) generated from hydrated oxides on aluminum exposed to ⁶⁰Co radiation were reviewed to evaluate hydrogen generation with radiation dose. Hydrogen generation rate is a primary input to the coupled thermal-chemical system model of the performance of aluminum-clad spent nuclear fuel in a dry storage canister (ASNF-in-canister) over its storage life. Hydrogen generation data and hydrogen generation rate (hydrogen generated per absorbed radiation dose, $\Delta$(H₂)/$\Delta$(dose)) were reported in two reports for radiolysis testing [1, 2]. The testing involved first-time data¹ for radiolytic yield of hydrogen from hydrated-oxides-on-aluminum substrates, and from pristine (non-corroded) aluminum substrates. The laboratory-grown hydrated-oxides-on-aluminum substrates contained a ~ 5 μm film consisting of the trihydroxide bayerite (Al(OH)₃) with amounts of the oxyhydroxide boehmite (AlOOH). These specimens were assumed to also contain physisorbed water (unquantified). The pristine substrates were flat coupons of aluminum that were ground to a 600-grit finish but were not immersed in water to grow a hydrated oxide. The pristine substrates were tested as companion specimens to provide information on hydrogen generation from material without chemisorbed water and were assumed to contain physisorbed water (unquantified).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Efficient Intermolecular Energy Exchange and Soft-ionization of Water at Nanoplatelet Interfaces

X-ray, energetic photon and electron irradiation can ionize and electronically excite target atoms and molecules. These excitations undergo complicated relaxation and energy transfer processes that ultimately determine the manifold of system responses to the deposited excess energy. In weakly bound gas- and solution-phase samples, intermolecular Coulomb decay (ICD) and electron-transfer mediated decay (ETMD) can occur with neighboring atoms or molecules leading to efficient transfer of the excess energy to the surroundings. In ionic solids such as metal-oxides, intra- and inter-atomic Auger decay produces localized final states that lead to lattice damage and typically removal of cations from the substrate. The relative importance of Auger stimulated damage (ASD) versus ICD and ETMD in micro-solvated nanoparticle interfaces is not known. Though ASD is generally expected, essentially no lattice damage and very efficient ICD and ETMD resulting from ionization and electronic excitation of micro-solvated boehmite (AlOOH) nanoplatelets has been observed. Efficient energy transfer and soft ionization of interfacial molecules is likely a general phenomenon at gas-oxyhydroxide nanoparticle interfaces where the density of states of the ionized chemisorbed species significantly overlap the core hole states of the solid.

Jones, Brant M.↗
DOE OSTI2022

Dynamic properties of 316l stainless steel repaired using electron beam additive manufacturing

Additive manufacturing has the potential to be used for repair of high-value parts, but the strength and integrity of such repaired parts, especially under dynamic loading, in still unknown. This work presents the results of high strain-rate dynamic testing of additively repaired stainless steel samples. The 316L samples were intentionally damaged and subsequently repaired with 308L stainless steel wire using electron beam additive manufacturing. The repaired samples were subjected to gas-gun impact testing to induce incipient damage and determine the role played by the repaired region in dictating damage and failure. The results show the following: 1) the equation of state of the repaired region is comparable to the original material as shown by the unchanged spall plane location, 2) the deformation behavior is similar to the original material as shown by the similar Hugoniot Elastic limit, 3) the spall strength of the repaired region is slightly higher than the original material due to varying grain size, and 4) the damage morphology in the repaired region is different and involves a high rate of void coalescence. In conclusion, despite these minor differences in the spall strength and the damage morphology, the overall dynamic response of the original material and repaired samples is similar suggesting that AM is a promising approach for repairing high-value components.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Report on Hydrogen Content Measurements of Yttrium Hydrides

This report describes the hydrogen content measurements of yttrium samples as irradiated at Advanced Test Reactor as part of the Microreactor Program. Irradiated samples were prepared at the facilities of Analytical Research Laboratory (ARL) of Materials and Fuels Complex (MFC). Hydrogen content measurements were performed on reduced size specimens using an inert gas fusion analyzer. For a single sample, replicate samples were prepared and tested to improve statistics of results. Uncertainty analyses were conducted using two approaches to determine the hydrogen content variations in the samples. Hydrogen content of irradiated specimens were both lower and higher than the expected values, indicating stoichiometry variations. Hydrogen was detected in all samples, even for the cracked capsule’s specimens. Results also suggested a potential hydrogen redistribution is present between samples inside the capsules.

08 HYDROGEN↗
NASA NTRS2022

The Titan Haze Simulation (THS) Experiment on COSmIC. Part III. XANES Study of Laboratory Analogs of Titan Tholins

We have used the Titan Haze Simulation (THS) experimental set-up at NASA Ames’ COSmIC 19 facility to produce four laboratory analogs of Titan’s aerosols, or tholins. These tholin samples 20 were produced from four gas mixtures, representative of Titan’s atmosphere, of initial 21 compositions N2:CH4 (90:10 and 95:5) and N2:CH4:C2H2 (89.5:10:0.5 and 94.5:5:0.5) at 150 K, 22 using a plasma discharge in the stream of a jet-cooled gas expansion. Here we present an ex-situ 23 X-ray absorption near-edge structure (XANES) spectroscopy analysis of these four tholin 24 samples. The C- and N-XANES spectra show the presence of various functional groups 25 (aromatic carbon, imines, nitriles, etc.) whose abundances are correlated with (i) the relative 26 proportions between N2 and CH4, and (ii) the presence or absence of C2H2 in the initial mixtures. 27 In particular, mixtures containing C2H2 result in the formation of tholins consisting of more 28 aromatic structures and displaying larger relative amounts of imines and nitriles, but lower 29 overall nitrogen content. XANES spectroscopy also allowed for the determination of the 30 elemental C/N ratios for the four tholins, which were all found to be low (< 2.5) and consistent 31 with those measured for tholins produced in other, independent experimental set-ups. The C/N 32 ratios of tholins produced from gas mixtures that contained C2H2 (2.2–2.4) were found to be 33 about twice as large as those of tholins produced from gas mixtures that did not contain C2H234 (0.9–1.3). These new experimental results from the COSmIC/THS experiment demonstrate the 35 impact initial precursors have on the nitrogen chemistry during the formation of tholins, which 36 may help in the interpretation of observations and the development of models of Titan’s 37 atmosphere.

Titan↗
DOE OSTI2021

A study of outer disc stellar populations of face-on star-forming galaxies in SDSS-IV MaNGA: causes of H α deficiency

ABSTRACT Integral field unit spectra of face-on star-forming galaxies from the MaNGA survey are stacked in radial bins so as to reach an S/N high enough to measure emission lines and Lick indices out to 2.5–3Re. Two-thirds of galaxies have stellar populations in the outer discs that are older, more metal poor, and less dusty than in the inner discs. Recent bursts of star formation have occurred more frequently in the outer disc, but extinction-corrected H α equivalent widths are significantly lower at fixed Dn(4000) in these regions. I examine the properties of a subset of galaxies with the most H α-deficient outer discs. These regions contain young stellar populations that must have formed within the last 0.5 Gyr, but have extinction-corrected H α values well below the values predicted for a standard Kroupa initial mass function. The H α-deficient galaxies have flat Dn(4000) and H δA profiles with little radial fluctuation, indicating that star formation has occurred extremely uniformly across the entire disc. The H α line profiles indicate that the ionized gas kinematics is also very regular across the disc. The main clue to the origin of the H α deficiency is that it sets in at the same radius where the dust extinction abruptly decreases, suggesting a mode of star formation deficient in massive stars in quiescent, H i-dominated gas. Finally, I have carried out a search for galaxies with signatures of unusual H α kinematics and find that 15 per cent of the sample exhibits evidence for significant ionized gas that is displaced from the systemic velocity of the disc.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Phenomenological Model of Nonlinear Dynamics and Deterministic Chaotic Gas Migration in Bentonite: Experimental Evidence and Diagnostic Parameters

Understanding gas migration in compacted clay materials, e.g., bentonite and claystone, is important for the design and performance assessment of an engineered barrier system of a radioactive waste repository system, as well as many practical applications. Existing field and laboratory data on gas migration processes in low-permeability clay materials demonstrate the complexity of flow and transport processes, including various types of instabilities, caused by nonlinear dynamics of coupled processes of liquid–gas exchange, dilation, fracturing, fracture healing, etc., which cannot be described by classical models of fluid dynamics in porous media. We here show that the complexity of gas migration processes can be explained using a phenomenological concept of nonlinear dynamics and deterministic chaos theory. To do so, we analyzed gas pressure and gas influx (i.e., input) and outflux (i.e., output), recorded during the gas injection experiment in the compact Mx80-D bentonite sample, and calculated a set of the diagnostic parameters of nonlinear dynamics and chaos, such a global embedding dimension, a correlation dimension, an information dimension, and a spectrum of Lyapunov exponents, as well as plotted 2D and 3D pseudo-phase-space strange attractors, based on the univariate influx and outflux time series data. These results indicate the presence of phenomena of low-dimensional deterministic chaotic behavior of gas migration in bentonite. In particular, during the onset of gas influx in the bentonite core, before the breakthrough, the development of gas flow pathways is characterized by the process of chaotic gas diffusion. After the breakthrough, with inlet-to-outlet movement of gas, the prevailing process is chaotic advection. During the final phase of the experiment, with no influx to the sample, the relaxation pattern of gas outflux is resumed back to a process of chaotic diffusion. The types of data analysis and a proposed phenomenological model can be used to establish the basic principles of experimental data-gathering, modeling predictions, and a research design.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Nature of the galaxies on top of quasars producing Mg ii absorption

ABSTRACT Quasar–galaxy pairs at small separations are important probes of gas flows in the disc–halo interface in galaxies. We study host galaxies of 198 Mg ii absorbers at 0.39 ≤ zabs ≤ 1.05 that show detectable nebular emission lines in the Sloan Digital Sky Survey (SDSS) spectra. We report measurements of impact parameter (5.9 ≤ D [kpc] ≤ 16.9) and absolute B-band magnitude (−18.7 ≤ MB ≤ −22.3 mag) of host galaxies of 74 of these absorbers using multiband images from the Dark Energy Spectroscopic Instrument (DESI) Legacy Imaging Survey, more than doubling the number of known host galaxies with D ≤ 17 kpc. This has allowed us to quantify the relationship between Mg ii rest equivalent width (W2796) and D, with best-fitting parameters of W2796 (D = 0) = 3.44 ± 0.20 Å and an exponential scale length of 21.6$^{+2.41}_{-1.97}\, \mathrm{ kpc}$. We find a significant anticorrelation between MB and D, and MB and W2796, consistent with the brighter galaxies producing stronger Mg ii absorption. We use stacked images to detect average emissions from galaxies in the full sample. Using these images and stacked spectra, we derive the mean stellar mass (9.4 ≤ log(M*/M⊙) ≤ 9.8), star formation rate (2.3 ≤ SFR [M⊙ yr−1] ≤ 4.5), age (2.5–4 Gyr), metallicity (12 + log(O/H) ∼ 8.3), and ionization parameter (log q [cm s−1] ∼ 7.7) for these galaxies. The average M* found is less than that of Mg ii absorbers studied in the literature. The average SFR and metallicity inferred are consistent with that expected in the main sequence and the known stellar mass–metallicity relation, respectively. High spatial resolution follow-up spectroscopic and imaging observations of this sample are imperative for probing gas flows close to the star-forming regions of high-z galaxies.

Astronomy & Astrophysics↗
DOE OSTI2023

3D-printed sheet jet for stable megahertz liquid sample delivery at X-ray free-electron lasers

X-ray free-electron lasers (XFELs) can probe chemical and biological reactions as they unfold with unprecedented spatial and temporal resolution. A principal challenge in this pursuit involves the delivery of samples to the X-ray interaction point in such a way that produces data of the highest possible quality and with maximal efficiency. This is hampered by intrinsic constraints posed by the light source and operation within a beamline environment. For liquid samples, the solution typically involves some form of high-speed liquid jet, capable of keeping up with the rate of X-ray pulses. However, conventional jets are not ideal because of radiation-induced explosions of the jet, as well as their cylindrical geometry combined with the X-ray pointing instability of many beamlines which causes the interaction volume to differ for every pulse. This complicates data analysis and contributes to measurement errors. An alternative geometry is a liquid sheet jet which, with its constant thickness over large areas, eliminates the problems related to X-ray pointing. Since liquid sheets can be made very thin, the radiation-induced explosion is reduced, boosting their stability. These are especially attractive for experiments which benefit from small interaction volumes such as fluctuation X-ray scattering and several types of spectroscopy. Although their use has increased for soft X-ray applications in recent years, there has not yet been wide-scale adoption at XFELs. Here, gas-accelerated liquid sheet jet sample injection is demonstrated at the European XFEL SPB/SFX nano focus beamline. Its performance relative to a conventional liquid jet is evaluated and superior performance across several key factors has been found. This includes a thickness profile ranging from hundreds of nanometres to 60 nm, a fourfold increase in background stability and favorable radiation-induced explosion dynamics at high repetition rates up to 1.13 MHz. Its minute thickness also suggests that ultrafast single-particle solution scattering is a possibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗