Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Flux Measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Attosecond intra-valence band dynamics and resonant-photoemission delays in W(110)

Time-resolved photoelectron spectroscopy with attosecond precision provides new insights into the photoelectric effect and gives information about the timing of photoemission from different electronic states within the electronic band structure of solids. Electron transport, scattering phenomena and electron-electron correlation effects can be observed on attosecond time scales by timing photoemission from valence band states against that from core states. However, accessing intraband effects was so far particularly challenging due to the simultaneous requirements on energy, momentum and time resolution. Here we report on an experiment utilizing intracavity generated attosecond pulse trains to meet these demands at high flux and high photon energies to measure intraband delays between sp- and d- band states in the valence band photoemission from tungsten and investigate final-state effects in resonant photoemission.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Causal interaction in high frequency turbulence at the biosphere–atmosphere interface: Structural behavior

High-frequency (e.g., 10 Hz) eddy covariance measurements are typically used to estimate fluxes at the land–atmosphere interface at timescales of 15–60 min. These multivariate data contain information about the interdependency at high frequency between the interacting variables such as wind, humidity, temperature, and CO 2⁠ . We use data at 10 Hz from an eddy covariance instrument located at 25 m above agricultural land in the Midwestern US, which offers an opportunity to move beyond the traditional spectral analyses to explore causal dependency among variables. In this study, we quantify the structure of inter-dependencies of interacting variables at high frequency represented by a directed acyclic graph (DAG). We compare DAGs to investigate changes in structural differences in causal interactions. We then apply a distance-based classification and -means clustering approach to identify the evolution of the causal structure represented by a DAG. Our method selects an unbiased number of clusters of similar structures and characterizes the similarities and differences between them. We explore a range of dynamic behavior using data from a clear sky day and during a solar eclipse in 2017. Our results show well-defined clusters of similar causal dependencies as the system evolves. Furthermore, our approach provides a methodological framework to understand how causal dependence in turbulence manifests in high-frequency data when represented through a DAG.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Separation of Hydrogen Using Pd/Ag Membranes: Experimental and Modeling Results with Potential Application to Direct Internal Recycle

Implementation of fusion energy requires processing the deuterium-tritium (D-T) mixture used to fuel the reaction, and separation of hydrogen isotopes from other gases is imperative. Specifically, the separation of hydrogen isotopes from helium is a matter of importance to the fusion fuel cycle community. Initial testing with a palladium-silver (Pd-Ag) membrane indicates that even moderate vacuum (~100 torr permeate pressure) can provide a high degree of separation (>90%) at a high ratio of H 2 to He. Given the presence of He in many fusion systems, a high technology readiness level (TRL) for Q 2 /He (where Q represents any isotope of hydrogen) separations is needed. This study demonstrates the efficacy of H 2 removal from He via permeation and potential applications for direct internal recycle. Modeling will accompany the experimental campaign to generate a predictive capability and quantify the separation performance. Modeling from previous hydrogen permeation studies has demonstrated that the typical Sieverts’ law fails to predict the measured permeation rates at high hydrogen fluxes. Existing models are being refined to integrate the effects of surface phenomena into permeation predictions, which have been expanded to account for mixtures with large ranges of Q 2 concentrations. These data will improve the TRL of permeators as a separation technology for the fusion fuel cycle.

08 HYDROGEN↗
DOE OSTI2025

Review of Neutron Yield from (α, n) Reactions: Data, Methods, and Prospects

Understanding the radiogenic neutron production rate through the (α, n) reaction is crucial in many areas of physics, including dark matter searches, neutrino studies, and nuclear astrophysics. In addition to its relevance for fundamental research, the (α, n) reaction also plays a significant role in nuclear energy technologies, for example by contributing to neutron production in subcritical systems using UO2, as well as in applications such as medical physics. This review examines the current state of (α, n) yield calculations and neutron spectra, describes the computational tools used for their estimation, and discusses the available cross-section data. We discuss the uncertainties affecting (α, n) yield estimations and propose a strategy to enhance their accuracy. Furthermore, this paper discusses and emphasizes the need for new measurements of (α, n) cross-sections for a variety of relevant materials. Such measurements are essential for improving neutron flux predictions, which are crucial for reducing uncertainties in sensitivity estimates for next-generation physics experiments operating in the keV—MeV range.

(α, n)reactions↗
DOE OSTI2021

Drift orbit islands of energetic particles due to 3D fields in ITER

In this study, we report a comparative study of the orbit islands formed by the guiding center drift motion of test energetic particles (EPs), including both high-energy deuterium ions and fusion-born α-particles, with respect to the magnetic islands formed by tracing the field lines, for an ITER plasma representing the 15 MA baseline scenario. The particle drift orbit is modified by the presence of static resonant magnetic perturbations (RMPs) of different toroidal mode numbers n (n = 1 and 3 in this study), forming orbit islands in the Poincaré plane by passing EPs. The key findings are as follows. (i) With an n = 1 RMP field, the size of the orbit islands combined with the total RMP field, including the plasma response, is about three times smaller than that obtained by assuming the corresponding vacuum field. (ii) The orbit island size is not sensitive to the EP energy, and is comparable to those of the magnetic islands. (iii) Passing EPs with outward radial orbital drift form orbit islands that shift inward with respect to the corresponding magnetic islands, and vice versa. This radial shift, ΔΨ, measured in the normalized equilibrium poloidal flux, is quantified as ΔΨ ≃ 0.03X for the ITER baseline plasma and assuming n = 1 RMPs, with $X\equiv {(M/{M}_{\mathrm{p}})}^{1/2}{(E[\mathrm{M}\mathrm{e}\mathrm{V}])}^{1/2}{Z}^{-1}$, where M is the particle mass, Mp is the proton mass, E is the particle energy, and Z is the particle charge number. (iv) Trapped EPs do not form drift orbit islands, even in the presence of the 3D fields produced by the 90 kAt ELM control coil current in ITER, and thus possess good confinement properties. Nevertheless, the deformation of the trapped particle drift orbits in the Poincaré plane shows that the canonical toroidal angular momentum of EPs is no longer conserved in the presence of the RMP fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Understanding the L-H isotope effect at the DIII-D tokamak and advancements in synthetic turbulence diagnostics

Abstract It is determined that while heat flux differences between hydrogen and deuterium isotope experiments result from natural differences in carbon impurity content at DIII-D, it is not the origin of the low to high confinement mode (L-H) transition isotope effect. More specifically, a two times larger edge radial electric field in hydrogen compared to deuterium is uncovered and believed to play an important role. The origin of this radial electric field difference is determined to have two possible origins: differences in poloidal rotation and turbulent Reynolds stress in the closed field line region, and increased outer strike point temperatures and space potentials on open field lines. Experimental observations from both profile and turbulence diagnostics are supported by nonlinear gyrokinetic simulations using the code CGYRO. Simulations illustrated heat transport isotope effects in the plasma edge and shear layer resulting from differences in impurity content, electron non-adiabaticity, and main ion mass dependent E × B shear stabilization. Turbulence prediction comparisons from flux-matched CGYRO simulations to experimental measurements including electron temperature, density and velocity fluctuations are found to be in good agreement with available data. A dedicated DIII-D experiment in hydrogen was performed to seed more carbon than naturally occurring, to match deuterium experiments, and possibly reduce the L-H power threshold based on gyro-kinetic predictions. To our surprise, while ion temperature gradient (ITG) turbulence was stabilized, nodiscernible change in L-H power threshold were observed in these special hydrogen experiments. In particular, it is noticed that the edge radial electric field and Reynolds stress were observed as nearly unchanging in the presence of ITG stabilization. These experimental data have enabled a more comprehensive picture of the multitude of isotope effects at play in fusion experiments, and the important potential connection between the confined and unconfined plasma regions in regulating L-H transition dynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

The NASA Carbon Monitoring System Phase 2 synthesis: scope, findings, gaps and recommended next steps

Abstract Underlying policy efforts to address global climate change is the scientific need to develop the methods to accurately measure and model carbon stocks and fluxes across the wide range of spatial and temporal scales in the Earth system. Initiated in 2010, the NASA Carbon Monitoring System is one of the most ambitious relevant science initiatives to date, exploiting the satellite remote sensing resources, computational capabilities, scientific knowledge, airborne science capabilities, and end-to-end system expertise that are major strengths of the NASA Earth Science program. Here we provide a synthesis of ‘Phase 2’ activities (2011–2019), encompassing 79 projects, 482 publications, and 136 data products. Our synthesis addresses four key questions: What has been attempted? What major results have been obtained? What major gaps and uncertainties remain? and What are the recommended next steps? Through this review, we take stock of what has been accomplished and identify future priorities toward meeting the nation’s needs for carbon monitoring reporting and verification.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Property Variations in Modern REBCO Coated Conductors from Multiple Manufacturers

The complex, multilayer structure of REBCO Coated Conductor (CC) poses significant challenges in the fabrication of high magnetic field devices where large stresses may initiate various forms of damage. Our goal is to peer below the cartoon representations of CC so that, amongst other things, we might better understand whether a CC from one manufacturer is interchangeable with that from another. This involves knowledge of a broad range of electromagnetic, geometric, microstructural, and J c (θ,B,T) properties, and their variations that collectively pose challenges for the fault tolerance of REBCO CC devices. Accordingly, comparative measurements of J c , visualization of flux penetration with Magneto-Optical Imaging (MOI), tape geometry from Scanning Electron Microscopy (SEM) of polished cross-sections, and extensive optical microscopy was performed on recently purchased samples from multiple manufacturers. Our analyses reveal many deviations from or characteristics absent from manufacturers’ specifications, while a comparison of different manufacturers’ mechanically and laser slit tapes shows a diverse array of slitting characteristics amongst the manufacturers and variation in properties those made to the same specification. Laser slit tapes from several manufacturers reveal ablated edges with damaged regions extending up to 50 μm, comparable to the damaged region found in the mechanically slit CC of this study. Overall, the aim of this study is to flesh out appropriate ways to understand the real conductor below the manufacturers’ cartoons to avoid surprises in our REBCO CC coil development program. The goal of this work was to perform a broad array of characterizations of the type needed for validation of purpose for making high field magnets: to our surprise we found a wide range of properties which greatly impact the mechanical strength and electromagnetic performance of solenoids composed of these conductors and reinforced the need for a broad characterization program for each conductor prior to its implementation.

Bradford, G.↗
DOE OSTI2026

Dark-matter-enhanced probe of relic neutrino clustering

We propose heavy decaying dark matter (DM) as a new probe of the cosmic neutrino background (C⁢𝜈⁢B). Heavy DM, with mass ≳ 10 9 GeV, decaying into neutrinos can be a new source of ultrahigh-energy (UHE) neutrinos. Including this contribution along with the measured astrophysical and predicted cosmogenic neutrino fluxes, we study the scattering of UHE neutrinos with the C⁢𝜈⁢B via standard weak interactions mediated by the 𝑍 boson. We solve the complete neutrino transport equation, taking into account both absorption and reinjection effects, to calculate the expected spectrum of UHE neutrino flux at future neutrino telescopes, such as the IceCube-Gen2 radio. We argue that such observations can be used to probe the C⁢𝜈⁢B properties and, in particular, local C⁢𝜈⁢B clustering. We find that, depending on the absolute neutrino mass and the DM mass and lifetime, a local C⁢𝜈⁢B overdensity ≳ 10 6 can be probed at the IceCube-Gen2 radio within ten years of data taking.

Dark matter↗
DOE OSTI2022

In-plasma photo-assisted etching of Si with chlorine aided by an external vacuum ultraviolet source

Photo-assisted etching of p-type Si was previously found to occur in a chlorine-containing, Faraday-shielded, inductively coupled plasma (ICP), and this was attributed to the vacuum ultraviolet (VUV) light generated by the plasma. Other causes for the very high etching rates were ruled out, including ion bombardment. In the present study, the substrate in the main Cl2/Ar ICP was subjected to extra VUV light that was generated in an independently controlled, auxiliary Ar/He ICP in tandem with the main ICP. The ICPs were separated by a tungsten mesh and a bundle of high-aspect-ratio quartz tubes in a honeycomb configuration. There was no measurable perturbation of the main plasma by the auxiliary plasma. The etching rate was found to be enhanced by 11%–51% with the additional VUV light provided by the auxiliary ICP. With absolute measurements of the auxiliary ICP photon flux at the sample surface, as described elsewhere, incredibly large etching yields of 90–240 Si atoms per photon were obtained. It is argued that etching is not a result of electron–hole pair formation but is instead ascribed to a photocatalytic chain reaction.

42 ENGINEERING↗
DOE OSTI2026

Searching for synchrotron emission from the geminga TeV halo using the planck satellite

Pulsars convert a significant fraction of their total spin-down power into very high-energy electrons, leading to the formation of TeV halos. While these halos are well characterized at TeV energies, it remains unclear whether pulsars also accelerate electrons efficiently at lower energies and how these particles propagate through their surrounding environments. We aim to test whether synchrotron emission from $\sim 50$–$300 \, \textrm{GeV}$ electrons around the Geminga pulsar can be detected in the frequency range observed by the Planck satellite. This would help constrain low-energy particle acceleration and diffusion in the vicinity of pulsars. We model the expected synchrotron emission from Geminga’s TeV halo based on various diffusion and injection spectrum scenarios and compare these predictions to publicly available multi-frequency Planck data. We find no conclusive evidence of spatially extended synchrotron emission associated with Geminga in any of Planck’s frequency bands. Our calculations show that even under favorable diffusion and injection conditions, the predicted synchrotron flux lies well below Planck’s measured background levels.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

A radioisotope - enabled reactive transport model for deep vadose zone carbon

In mountainous regions, which constitute the principle source of recharge to major rivers and regional aquifers, infiltration occurs through fractured, partially saturated, weathered bedrock that acts as a boundary layer between saturated aquifers and surface soil. Commonly this deep vadose zone (DVZ) is many meters thick, and yet its role in regulating the generation, retention and mobility of reactive solutes, including nutrients, contaminants and weathering products, is largely unknown. In particular, many of the key reactions that drive the formation of the weathered DVZ and the quality of water moving through it are redox processes, regulated by the availability of organic carbon and oxygen below the soil layer. The role of the DVZ is thus also poorly constrained in the context of carbon stocks and mobility, particularly in lithologies that are naturally high in organic carbon, such as shales. The overarching hypothesis of this study is that upland regions developed in geologic settings with abundant petrogenic carbon store and actively cycle carbon in the weathered DVZ below the soil and above the water table at rates that are significant and currently unconstrained. In order to quantify this cycling, the current study combines novel instrumentation techniques allowing new direct sampling of DVZ systems with advanced numerical reactive transport simulations of carbon transport and transformation. Critically, these simulations will explicitly treat the three isotopes of carbon (the abundant 12C, the stable rare 13C and the radioactive 14C) in a unified framework, thus clearly parsing between the contributions of modern surface derived carbon and lithologic carbon sources in integrated measurements of fluid and gas phase fluxes. This novel model capability will be applied to test the role of DVZ carbon cycling as a regulator of water quality and geological weathering in two complementary field sites both located in organic carbon rich shale lithologies. The first is the Eel River Critical Zone Observatory (ERCZO) in Mendocino County, California, and the second is the Lawrence Berkeley National Laboratory Watershed Function Scientific Focus Area (SFA) in the East River watershed, near Crested Butte, Colorado. At the ERCZO, a novel vadose zone monitoring system has been installed in a 20 m thick, partially saturated, weathered shale hillslope, and preliminary data already indicate substantial CO2 flux generated many meters below the soil surface. At the SFA field site, an instrumented hillslope transect indicates a more complex multi-dimensional fluid and solute transport regime, which will serve as a key test of the calibrated models. Collectively, this project will advance understanding of the cycling of carbon belowground and in relation to transport pathways across the poorly constrained DVZ characteristic of primary water recharge areas. The key product of this work will be enhanced isotope simulation capabilities that are robust and publicly available for application across a broad diversity of systems.

58 GEOSCIENCES↗
DOE OSTI2024

Strategy to Develop a Control Scheme for Core Thermal Performance Optimization

This report outlines a three-year research plan for optimizing reactor core thermal performance through use of a Digital Twin (DT) model and a set of neutron detectors to correspondingly adapt the reactor control strategy. It identifies reactor features and achievable neutron measurements that factor into this optimization task. It considers spatial effects that are important and how they can be managed by a real-time algorithm that controls reactivity actuators. The report presents a set of tasks, along with corresponding methods, for accomplishing this objective. The final task in this set is to validate the combined optimization procedure in the Purdue University’s PUR-1 reactor, for which we have an agreement of understanding. Additionally, we describe an alternative approach for overcoming some of the limitations inherent in the above approach, which includes the computational costs of high-fidelity simulations and achievable integration of neutron measurements into the DT. The proposed algorithms lower the technology readiness level (TRL) of the overall approach as some additional analysis and the development of a new neutron detector concept are necessary. In particular, a sensor measuring the gradient of the neutron flux is required, and the prototype is expected to be validated in the PUR-1 reactor. The potential benefits and the opportunity to significantly push forward the state-of-the-art make this approach worthy of further exploration in the upcoming years.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

MPEX AI Digital Twins

All magnetically confined plasma fusion power plant concepts (Tokamak, Spherical Tokamak, Stellarator, Mirror, ...) must exhaust the heat and plasma from the core confinement region to the material walls. The primary channel for this exhaust is through a plasma divertor which directs plasma along open magnetic field lines to a material target. The Material Plasma Exposure eXperiment (MPEX) illustrated in Figure 1, is a high-power, steady-state linear plasma device designed to produce the plasma material interaction (PMI) conditions of the divertor of future magnetic confinement fusion power plants: energy flux 20MW/m 2 , ion fluence 1031/m 2 , pulse duration 106 sec. These goals of plasma exposure in MPEX are well beyond those achieved in magnetic fusion experimental devices. Successfully achieving these high power steady state conditions for long pulses requires operational control of the heating and particle sources and the plasma flux to the walls and target. The MPEX AI Hot Spot Controller, proposed in this project, will help achieve the operational milestones of MPEX. The MPEX device will begin commissioning at the end of FY26. A smaller proto-MPEX was operated for 14,666 plasma discharges and will resume operation in September of 2025 as proto-MPEX-lite, with reduced capability, to test a new window for the Helicon plasma source. The proto-MPEX data has undergone surrogate modeling with machine learning methods (R. Archibald, 2022 IEEE International Conference on Big Data). This proto-MPEX data will be used to begin development of the AI digital twins described in this white paper. The scientific mission of MPEX is to qualify materials of different composition for use in the high energy and plasma flux conditions of a fusion power plant. The materials exposed in MPEX will in some cases be exposed to high neutron fluxes at other ORNL facilities to measure the changes to their PMI properties. The targets exposed in MPEX will be transported under vacuum to a Surface Analysis Station (SAS). The SAS will be equipped with the following diagnostics: Focused Ion Beam (FIB) for trench milling, 100-400 angstrom resolution scanning electron microscope (SEM), surface mapping x-ray spectrometer, high resolution camera, and a future upgrade to a laser induced breakdown spectroscopy quadruple mass spectrometer (LIBS-QMS). The MPEX experiments will generate diverse pre- and post-exposure measurement data of detailed material properties down to the crystal grain level in 3D for post-exposure assessment of PMI damage (e.g. cracking, melting, erosion and redeposition of the material). Physics models for the PMI, and how the material composition and manufacturing impact its performance under high energy plasma exposure, need to be validated with MPEX data to guide the selection of new candidate materials. Our vision for the MPEX AI Digital Twins project is to supply experimental and physics model simulation data to train Artificial Intelligence (AI) models for data processing, analysis, operational control, PMI and materials simulation to maximize the scientific output of the MPEX device. Ultimately, an AI digital twin of MPEX material assessment metrics for tested and synthetic material types with simulated PMI will be trained by the AI Modeling Teams on the experimental and physics simulation data submitted to the American Science Cloud by this project. A purely empirical search for the best material is inefficient given the finite number of samples that can be tested on MPEX. In order to expand the material properties database for training the MPEX Material Assessment AI Digital Twin, and to gain physics understanding of the PMI processes, physics models of the material properties and PMI processes are required. The physics simulations provide detailed simulation data, like impact angles for plasma ions, sputtering yields, transport of the ionized sputtered target material in the plasma, and redeposition locations. This simulation data expands the measurement data for deeper physics understanding. The experimental data is essential to validate the PMI and material structure simulation models. The validated models can then be used to generate new simulation data of MPEX material assessments for synthetic material compositions that have not been exposed in MPEX. These predictive simulations, plus the whole experimental dataset, will be used to train the MPEX Material Assessment AI Digital Twin allowing a rapid generative AI search for new materials with reduced PMI damage by interpolating the domain of the training set. These new optimum materials can be simulated with the physics codes and/or tested in MPEX. The ability of AI neural networks to interpolate multi-dimensional parameter spaces and generate virtual data is exploited for a more efficient search for optimum materials. The advent of the Transformational AI Models Consortium (TAIMC) is an opportunity to engage with state of the art private and public AI developers to achieve the goals of the AI digital twins and AI accelerated physics models proposed in this project. Our partners at ORNL from the Advance Scientific Computing Research (ASCR) organization will collaborate in accelerating the integrated plasma material interaction simulation framework. This simulation framework will provide a platform for generating simulation data across a range of physical fidelities, including hybrid methods that produce multi-fidelity results. This data will be leveraged for AI model development, both for generation of surrogates and the automation of simulation campaigns. A part of the research below will include collaborative efforts with the TAIMC to (i) adapt data storage approaches to ensure AI-readiness, (ii) provide a protypical exemplar to inform and exercise constructed workflows, and (iii) generate and share data, using the TAIMC unified AI data standard, for foundational models that will be trained from multiple sources across the DOE complex. We will also collaborate with the TAIMC, as well as the planned AI modeling teams, to develop approaches for reducing the cost of data generation. These include tailored multi-fidelity approaches as well as fine-tuning strategies to augment general, large-scale foundational models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Demonstration of Algorithm for Sensor Placement Optimization using Simulation Data

This deliverable reports FY26 progress in advancing a neural-network-based Green’s-function framework for reconstructing neutron-flux distributions from ex-core measurements and for translating reconstruction requirements into a practical detector-layout strategy. Building on the FY25 formulation, the present work had two main objectives: (1) refine and re-evaluate the reconstruction methodology on an updated Purdue University Reactor Number One (PUR-1) model, and (2) develop a systematic, Green’s-function-guided procedure for boundary detector placement.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

RELICS: Properties of z ≥ 5.5 Galaxies Inferred from Spitzer and Hubble Imaging, Including A Candidate z ~ 6.8 Strong [O iii] emitter

We present constraints on the physical properties (including stellar mass, age, and star formation rate) of 207 6 ≲ z ≲ 8 galaxy candidates from the Reionization Lensing Cluster Survey (RELICS) and Spitzer-RELICS surveys. We measure photometry using T-PHOT and perform spectral energy distribution fitting using EA z Y and BAGPIPES. Of the 207 candidates for which we could successfully measure (or place limits on) Spitzer fluxes, 23 were demoted to likely z < 4. Among the high- z candidates, we find intrinsic stellar masses between 1 &#x00d7; 10 6 M ⊙ and 4 &#x00d7; 10 9 M ⊙ , and rest-frame UV absolute magnitudes between -22.6 and -14.5 mag. While our sample is mostly comprised of galaxies, it extends to . Our sample spans ~4 orders of magnitude in stellar mass and star formation rates, and exhibits ages that range from maximally young to maximally old. We highlight 11 z ≥ 6.5 galaxies with detections in Spitzer/IRAC imaging, several of which show evidence for some combination of evolved stellar populations, large contributions of nebular emission lines, and/or dust. Among these is PLCKG287+32-2013, one of the brightest z ~ 7 candidates known (AB mag 24.9 at 1.6 μ m) with a Spitzer 3.6 μ m flux excess suggesting strong [O iii ] + H- β emission (~1000 Å rest-frame equivalent width). We discuss the possible uses and limits of our sample and present a public catalog of Hubble + Spitzer photometry along with physical property estimates for all objects in the sample. Because of their apparent brightnesses, high redshifts, and variety of stellar populations, these objects are excellent targets for follow-up with the James Webb Space Telescope.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Are All Post-starbursts Mergers? HST Reveals Hidden Disturbances in the Majority of PSBs

How do galaxies transform from blue, star-forming spirals to red, quiescent early-type galaxies? To answer this question, we analyzed a set of 26 gas-rich, shocked post-starburst galaxies with Hubble Space Telescope (HST) imaging in $B$, $I$, and $H$ bands and Sloan Digital Sky Survey (SDSS) $i$-band imaging of similar depth but lower resolution. We found that post-starbursts in our sample have intermediate morphologies between disk- and bulge dominated (Sérsic $n$ = ${1.7}_{-0.0}^{+0.3}$ ) and have red bulges, likely due to dust obscuration in the cores. A majority of galaxies in our sample are more morphologically disturbed than regular galaxies (88%, corresponding to >3$σ$ significance) when observed with HST, with asymmetry and Sérsic residual flux fraction being the most successful measures of disturbance. Most disturbances are undetected at the lower resolution of SDSS imaging. Although ~27% galaxies are clear merger remnants, we found that disturbances in another ~30% of the sample are internal, caused by small-scale perturbations or dust substructures rather than tidal features, and require high-resolution imaging to detect. We found 2.8$σ$ evidence that asymmetry features fade on timescales ~200 Myr, and may vanish entirely after ~750 Myr, so we do not rule out a possible merger origin of all post-starbursts given that asymmetric features may have already faded. This work highlights the importance of small-scale disturbances, detected only in high-resolution imaging, in understanding structural evolution of transitioning galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Effects of Pressure on Superconducting Properties and Vortex Pinning of CaKFe 4 As 4 Single Crystals

Measurements of low field magnetization, trapped flux magnetization and 5 K flux creep in single crystal of CaKFe 4 As 4 under pressure up to 7.5 GPa in a diamond pressure cell are presented. Further, the observed evolution of the temperature dependence of the self-field critical current and slowing down of the base temperature flux creep rate are explained within the two sources of pinning hypothesis involving presence of CaFe 2 As 2 intergrowths suggested in the literature. Above the half collapsed tetragonal structural transition under pressure, where superconductivity is non-bulk or absent, critically diminished or no diamagnetism and flux trapped magnetization were observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗