Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FRACTURE MECHANICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

A fuselage/tank structure study for actively cooled hypersonic cruise vehicles: Structural analysis

The effects of fuselage cross-section (circular and elliptical) and structural arrangement (integral and nonintegral tanks) on the performance of actively cooled hypersonic cruise vehicles was evaluated. It was found that integrally machined stiffening of the tank walls, while providing the most weight-efficient use of materials, results in higher production costs. Fatigue and fracture mechanics appeared to have little effect on the weight of the three study aircraft. The need for thermal strain relief through insulation is discussed. Aircraft size and magnitude of the internal pressure are seen to be significant factors in tank design.

Baker, A. H.↗

The 1975 NASA/ASEE summer faculty fellowship research program

A research program was conducted to further the professional knowledge of qualified engineering and science faculty members, to stimulate an exchange of ideas between participants and NASA engineers and scientists, and to enrich the research activities of the participants' institutions. Abstracts of reports submitted at the end of the program are presented. Topics investigated include multispectral photography, logic circuits, gravitation theories, information systems, fracture mechanics, holographic interferometry, surface acoustic wave technology, ion beams in the upper atmosphere, and hybrid microcircuits.

Source record↗

Corrosion and fatigue of surgical implants

Implants for the treatment of femoral fractures, mechanisms leading to the failure or degradation of such structures, and current perspectives on surgical implants are discussed. Under the first heading, general usage, materials and procedures, environmental conditions, and laboratory analyses of implants after service are considered. Corrosion, crevice corrosion, stress corrosion cracking, intergranular corrosion, pitting corrosion, fatigue, and corrosion fatigue are the principal degradation mechanisms described. The need for improvement in the reliability of implants is emphasized.

Lisagor, W. B.↗

Fatigue crack propagation behavior of the Ni-Ni3Cb eutectic composite

The experimental procedures used in the investigation are considered, taking into account solidification and heat treatment, fatigue testing, questions of test specimen and loading fixture design verification, metallographic techniques, and electron microscopy techniques. Attention is given to the characteristics of the microstructure, aspects of fatigue crack propagation (FCP) in the Ni-Ni3Nb composite, the effect of test variables on FCP, the effect of metallurgical variables on FCP, and fatigue fracture mechanisms. Fractographic and metallographic observations are discussed.

Mills, W. J.↗

Hydrogen-environment embrittlement of metals and its control

Types of hydrogen embrittlement are discussed together with characteristics of hydrogen-environment embrittlement, the degree of hydrogen-environment embrittlement of a wide variety of alloys, the effect of hydrogen environments on various properties, (tension, fatigue, creep and fracture mechanics), and the influence of hydrogen exposure parameters on the degree of embrittlement. Design methods for high-pressure hydrogen service and for prevention of hydrogen-environment embrittlement are also covered.

Chandler, W. T.↗

A review of the state-of-the-art of the non-destructive testing of flight pressure vessels

The design of flight vessels is based on a nominal stress requirement and a fracture mechanics approach, and optimization of the weight of the vessel is based on the smallest size defect that can be detected with a high degree of confidence. The wide variety of metals used for fabrication, and the different defects that may be present in them at every stage, up to completion of the vessel, is described. Techniques currently being used for NDT are described along with their advantages, limitations and limits of detectability at high levels of confidence. Techniques considered for use in the future to improve the limits of the minimum flaw size that can currently be detected include the Delta Scan and Acoustic Emission techniques. The construction of space vessels for use in the future has been modified to reduce the presence of critical defects and so to improve the cost effectiveness of projected NDT requirements.

Noronha, P. J.↗

Improved turbine disk design to increase reliability of aircraft jet engines

An analytical study was conducted on a bore entry cooled turbine disk for the first stage of the JT8D-17 high pressure turbine which had the potential to improve disk life over existing design. The disk analysis included the consideration of transient and steady state temperature, blade loading, creep, low cycle fatigue, fracture mechanics and manufacturing flaws. The improvement in life of the bore entry cooled turbine disk was determined by comparing it with the existing disk made of both conventional and advanced (Astroloy) disk materials. The improvement in crack initiation life of the Astroloy bore entry cooled disk is 87% and 67% over the existing disk made of Waspaloy and Astroloy, respectively. Improvement in crack propagation life is 124% over the Waspaloy and 465% over the Astroloy disks. The available kinetic energies of disk fragments calculated for the three disks indicate a lower fragment energy level for the bore entry cooled turbine disk.

Alver, A. S.↗

A reliability-based cost effective fail-safe design procedure

The authors have developed a methodology for cost-effective fatigue design of structures subject to random fatigue loading. A stochastic model for fatigue crack propagation under random loading has been discussed. Fracture mechanics is then used to estimate the parameters of the model and the residual strength of structures with cracks. The stochastic model and residual strength variations have been used to develop procedures for estimating the probability of failure and its changes with inspection frequency. This information on reliability is then used to construct an objective function in terms of either a total weight function or cost function. A procedure for selecting the design variables, subject to constraints, by optimizing the objective function has been illustrated by examples. In particular, optimum design of stiffened panel has been discussed.

Hanagud, S.↗

A theory for creep crack growth

The paper derives an analytical expression for creep crack growth rate based on a model in which the higher and concentrated stresses ahead of the crack tip enhance creep deformation, thus progressively causing stress rupture and continuous crack advance. The equation derived for creep crack growth rate is expressed in terms of a geometrical factor in the stress intensity expression and in terms of the crack tip radius whose lower limit estimate is the fracture mechanics crack-tip opening displacement. The functional features of the derived creep crack growth rate equation can be compared with those of a pertinent empirical equation. The analytical expression provides some guidelines for alloy and microstructure design.

Purushothaman, S.↗

Cyclic-load crack growth in ASME SA-105 grade II steel in high-pressure hydrogen at ambient temperature

ASME SA-105 Grade II steel, which is used in high-pressure hydrogen compressor systems, is similar to steels used or considered for use in high-pressure hydrogen storage vessels and pipelines. This paper summarizes the results of a program conducted to provide cyclic-load crack growth rate (da/dN) data for a fracture mechanics analysis of a 15,000 psi hydrogen compressor facility which contains pulse quieter and after-cooler separator vessels constructed of the ASME SA-105 Grade II steel. Included in the program were tests performed to assist in establishing operating procedures that could minimize the effect of hydrogen on crack growth rates during operation.

Walter, R. J.↗

Astronautic Structures Manual, Volume 3

This document (Volumes I, II, and III) presents a compilation of industry-wide methods in aerospace strength analysis that can be carried out by hand, that are general enough in scope to cover most structures encountered, and that are sophisticated enough to give accurate estimates of the actual strength expected. It provides analysis techniques for the elastic and inelastic stress ranges. It serves not only as a catalog of methods not usually available, but also as a reference source for the background of the methods themselves. An overview of the manual is as follows: Section A is a general introduction of methods used and includes sections on loads, combined stresses, and interaction curves; Section B is devoted to methods of strength analysis; Section C is devoted to the topic of structural stability; Section D is on thermal stresses; Section E is on fatigue and fracture mechanics; Section F is on composites; Section G is on rotating machinery; and Section H is on statistics. These three volumes supersede Volumes I and II, NASA TM X-60041 and NASA TM X-60042, respectively.

Source record↗

Crack-propagation predictions

New program, FLAGRO-III, aids predictive analysis of preexisting subcritical flaws or cracks. Fracture mechanics are applied as tool to predict growth of fatigue cracks and to evaluate tolerance of given structural design damage.

Kan, H. P.↗

Advances in engineering science, volume 1

Proceedings from a conference on engineering advances are presented, including materials science, fracture mechanics, and impact and vibration testing. The tensile strength and moisture transport of laminates are also discussed.

Source record↗

Recertification of the air and methane storage vessels at the Langley 8-foot high-temperature structures tunnel

This center operates a number of sophisticated wind tunnels in order to fulfill the needs of its researchers. Compressed air, which is kept in steel storage vessels, is used to power many of these tunnels. Some of these vessels have been in use for many years, and Langley is currently recertifying these vessels to insure their continued structural integrity. One of the first facilities to be recertified under this program was the Langley 8-foot high-temperature structures tunnel. This recertification involved (1) modification, hydrotesting, and inspection of the vessels; (2) repair of all relevant defects; (3) comparison of the original design of the vessel with the current design criteria of Section 8, Division 2, of the 1974 ASME Boiler and Pressure Vessel Code; (4) fracture-mechanics, thermal, and wind-induced vibration analyses of the vessels; and (5) development of operating envelopes and a future inspection plan for the vessels. Following these modifications, analyses, and tests, the vessels were recertified for operation at full design pressure (41.4 MPa (6000 psi)) within the operating envelope developed.

Hudson, C. M.↗

Concepts for improving turbine disk integrity

Advanced disk structural concepts are used to improve the cyclic lives and reliability of turbine disks. Analytical studies were conducted to evaluate bore-entry disks as potential replacements for the existing first-stage turbine disks in the CF6-50 and JT8D-17 engines. Results of low-cycle fatigue, burst, fracture mechanics, and fragment energy analyses are summarized for the advanced disk designs and the existing disk designs with both conventional and advanced disk materials. Other disk concepts such as composite, laminated, link, multibore, multidisk, and spline disks were also evaluated for the CF6-50 engine.

Kaufman, A.↗

Investigation of lightweight designs and materials for LO2 and LH2 propellant tanks for space vehicles, phase 1

Design, analysis, and fabrication studies were performed on nonintegral (suspended) tanks using a representative space tug design. The LH2 and LO2 tank concept selection was developed. Tank geometries and support relationships were investigated using tug design propellant inertias and ullage pressures, then compared based on total tug systems effects. The tank combinations which resulted in the maximum payload were selected. Tests were conducted on samples of membrane material which was processed in a manner simulating production tank fabrication operations to determine fabrication effects on the fracture toughness of the tank material. Fracture mechanics analyses were also performed to establish a preliminary set of allowables for initial defects.

Source record↗

Influences of chemical and thermal environments on delay in a Ti-6Al-4V alloy

Experiments were conducted within the framework of linear fracture mechanics to study the effects of chemical and thermal environments on crack-growth retardation (delay) in mill-annealed Ti-6Al-4V alloy under elemental load spectra. Attention is focused on the influence of hold time at high load on delay in a 3.5 percent NaCl solution at room temperature. It is shown that delay is strongly affected by hold time at high load, where delay is longest if the high-load excursion occurs at high temperature and the subsequent fatigue is at room temperature, and shortest if the temperature profile is reversed. The results suggest that residual stresses ahead of the advancing crack play an important role in delay. The significance of combined load and environment (chemical and thermal) effects in terms of modeling and life prediction procedures is discussed.

Shih, T. T.↗

Crack border stress and displacement equations revisited

It is more or less accepted in fracture mechanics that the elastic stress and displacements very near to the tip of a plane line crack can be approximated with sufficient accuracy, for all geometries and outer boundary loading conditions, by a one-parameter representation, i.e., strictly in terms of the stress intensity factors KI and/or KII. It is shown here that this presumption which appears to be reasonable on face value, quantitatively speaking, is nevertheless unacceptable as a general proposition. The reason lies with the quite arbitrary practice of omitting the second term of the series representation for the stresses, a contribution which is independent of distance from the crack tip. It is not difficult to show by way of specific examples how such omission can lead to error of serious qualitative nature in the prediction of stress and displacement related quantities of interest.

Eftis, J.↗