SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The focused helium ion beam is ideally suited to precision milling of thin films avoiding implantation artifacts.
In situ SAXS and population balance modeling (PBM) are used to discover the mechanism(s) of size focusing during Pd nanoparticle synthesis.
Fossil fuels are being replaced with renewable energy resources (biomass and biomass waste, solar, geothermal, wind, etc.) to ensure sustainable development, reduce the dependence on fossil fuels, address environmental challenges including climate change. Today, biomass produces 5 × 10 19 kJ of energy/year, which corresponds to 10% of the annual global energy consumption. Considering the variety of biomass resources, this value is predicted to reach 150 × 10 19 kJ by 2050. Biomass may become even more important for use as an energy resource and chemical raw material in the 21st century. Hydrothermal biomass conversion stands out as a promising and alternative technology. Methods such as traditional gasification and pyrolysis require dry biomass. Hydrothermal techniques have been developed to eliminate the cost and time required for drying biomass. The purpose of this process is to decompose biomass with a high moisture content into small molecules and reduce its oxygen content to obtain liquid fuels or valuable chemicals. Finally, this review presents the current and future state of energy, energy sources, biomass properties and biomass conversion technologies with a focus on hydrothermal technologies.
This review provides a focused discussion on the structures and ionic conduction mechanisms of inorganic solid-state proton and hydride anion conductors.
Focused electron beam induced etching (FEBIE) of Nb films produced a maximum etching yield of 3 Nb atoms/e − while varying beam energy, beam current, dwell time, and XeF 2 precursor working pressure. An optimized etch resolution of 17 nm was achieved.
The interaction of a focused acoustic beam with materials generates Rayleigh surface waves (RSW) and surface skimming longitudinal waves (SSLW). Acoustic microscopic investigations have used the RSW amplitude and the velocity measurements, extensively for grain structure analysis. Although, the presence of SSLW has been recognized, it is rarely used in acoustic imaging. This paper presents an approach to perform microstructure imaging and local elastic modulus measurements by combining both RSW and SSLW. The acoustic imaging of grain structure was performed by measuring the amplitude of RSW and SSLW signal. The microstructure images obtained on the same region of the samples with RSW and SSLW are compared and the difference in the contrast observed is discussed based on the propagation characteristics of the individual surface waves. The velocity measurements are determined by two point defocus method. The surface wave velocities of RSW and SSLW of the same regions of the sample are combined and presented as average Young's modulus image.
CoSi-C binary alloys have been fabricated by focused electron beam-induced deposition by the simultaneous use of dicobaltoctacarbonyl, Co{sub 2}(CO){sub 8}, and neopentasilane, Si{sub 5}H{sub 12}, as precursor gases. By varying the relative flux of the precursors, alloys with variable chemical composition are obtained, as shown by energy dispersive x-ray analysis. Room temperature electrical resistivity measurements strongly indicate the formation of cobalt silicide and cobalt disilicide nanoclusters embedded in a carbonaceous matrix. Temperature-dependent electrical conductivity measurements show that the transport properties are governed by electron tunneling between neighboring CoSi or CoSi{sub 2} nanoclusters. In particular, by varying the metal content of the alloy, the electrical conductivity can be finely tuned from the insulating regime into the quasi-metallic tunneling coupling regime.
We demonstrate the existence and control of inter-particle magnetic exchange coupling in densely packed nanostructures fabricated by focused electron beam induced deposition. With Xe beam post-processing, we have achieved the controlled reduction and eventual elimination of the parasitic halo-like cobalt deposits formed in the proximity of intended nanostructures, which are the identified source of the magnetic exchange coupling. The elimination of the halo-mediated exchange coupling is demonstrated by magnetic measurements using Kerr microscopy on Co pillar arrays. Electron microscopy studies allowed us to identify the mechanisms underlying this process and to verify the efficiency and opportunities of the described nano-scale fabrication approach.
We report ferroelectric domain inversion in strontium barium niobate (SBN) single crystals by irradiating the surface locally with a strongly focused ultraviolet (UV) laser beam. The generated domains are investigated using piezoresponse force microscopy. We propose a simple model that allows predicting the domain width as a function of the irradiation intensity, which indeed applies for both SBN and LiNbO{sub 3}. Evidently, though fundamentally different, the domain structure of both SBN and LiNbO{sub 3} can be engineered through similar UV irradiation.
Virtual cathode oscillators, or vircators, are a type of high power microwave device which operates based on the instability of a virtual cathode, or cloud of electrons, which forms when electron current injected into the drift tube exceeds the space charge limited current within the drift tube. Anode heating by the electron beam during vircator operation ultimately limits achievable pulse lengths, repetition rates, and the duration of burst mode operation. This article discusses a novel cathode design that focuses electrons through holes in the anode, thus significantly reducing anode heating by the electrons emitted from the cathode during the first transit through the A-K gap. Reflexing electrons continue to deposit energy on the anode; however, the discussed minimization of anode heating by main beam electrons has the potential to enable higher repetition rates as well as efficiency and longer diode lifetime. A simulation study of this type of cathode design illustrates possible advantages.
Previous analyses suggest that microwave frequency combs (MFCs) with harmonics having extremely narrow linewidths could be produced by photodetection with a mode-locked ultrafast laser. In the MFC generated by focusing a passively mode-locked ultrafast laser on a tunneling junction, 200 harmonics from 74.254 MHz to 14.85 GHz have reproducible measured linewidths approximating the 1 Hz resolution bandwidth (RBW) of the spectrum analyzer. However, in new measurements at a RBW of 0.1 Hz, the linewidths are distributed from 0.12 to 1.17 Hz. Measurements and analysis suggest that, because the laser is not stabilized, the stochastic drift in the pulse repetition rate is the cause for the distribution in measured linewidths. It appears that there are three cases in which the RBW is (1) greater than, (2) less than, or (3) comparable with the intrinsic linewidth. The measured spectra in the third class are stochastic and may show two or more peaks at a single harmonic.
Atom-photon interfaces are one of the building blocks of the future quantum information protocols. Accomplishing a strong interaction between the atom and the photons can be successfully done by high finesse and small mode volume cavities. However, this method requires sophisticated dielectric coatings and stabilization of the cavity against even small vibrations and small line width of those cavities impose higher input photon numbers if spontaneously emitted photons are to be used, which make it seem hard to scale up such atom-light interfaces to form quantum networks. An alternative method is to use a nearly concentric cavity, which has a strongly focused optical mode.
Rhythmic neuronal oscillations across a broad range of frequencies, as well as spatiotemporal phenomena, such as waves and bumps, have been observed in various areas of the brain and proposed as critical to brain function. While there is a long and distinguished history of studying rhythms in nerve cells and neuronal networks in healthy organisms, the association and analysis of rhythms to diseases are more recent developments. Indeed, it is now thought that certain aspects of diseases of the nervous system, such as epilepsy, schizophrenia, Parkinson's, and sleep disorders, are associated with transitions or disruptions of neurological rhythms. This focus issue brings together articles presenting modeling, computational, analytical, and experimental perspectives about rhythms and dynamic transitions between them that are associated to various diseases.
The nonlinear dynamics of electromagnetic waves propagating through a plasma considering the effects of relativistic mass and ponderomotive nonlinearities is investigated. The modified electron density distribution, the dispersion relation, and the spatial profiles of electromagnetic wave amplitude in the plasma are obtained. It is shown that the cut-off frequency decreases, and there is an intensity range in which the ponderomotive self-focusing takes place. In the upper limit of this range, the laser beam is defocused due to the relativistic ponderomotive force. In addition, the stability of electromagnetic waves to stimulated Brillouin scattering is studied, and the backscattered wave resulting from decay of high power electromagnetic beam is resolved in relativistic regime. The study of effects of electron density and temperature on the growth rate of backscattered wave has been shown that by increasing these effects, the growth rate of instability increases.
Electron holography in the transmission electron microscope (TEM) offers the spatial and signal resolution for studying effects like Fermi level pinning or dopant concentration variations important for the design of modern electronic devices. To overcome the loss of information along the projection direction, surface effects, and surface damage due to TEM specimen preparation, we apply electron holographic tomography to analyze the 3D potential distribution of semiconductor samples prepared by focused-ion-beam. We observe mid-band gap pinning of the Fermi level at Si surfaces but valence band pinning at Ge surfaces. The pinning extends over tens of nanometers into the bulk.
We demonstrate a simple device to generate chemical concentration gradients in a microfluidic channel using focused travelling surface acoustic waves (F-TSAW). A pair of curved interdigitated metal electrodes deposited on the surface of a piezoelectric (LiNbO{sub 3}) substrate disseminate high frequency sound waves when actuated by an alternating current source. The F-TSAW produces chaotic acoustic streaming flow upon its interaction with the fluid inside a microfluidic channel, which mixes confluent streams of chemicals in a controlled fashion for an adjustable and rapidly switching gradient generation.
Near-field plates consist of non-periodically patterned surfaces that can overcome the diffraction limit and confine electromagnetic fields to subwavelength dimensions. Previous near-field plates experimentally demonstrated extreme field tailoring capabilities. However, their performance suffered from radiation/reflection in undesired directions, those other than the subwavelength focus. This issue can limit the practical use of near-field plates. In this paper, we address this issue by designing a unidirectional near-field plate that can form a subwavelength focal pattern, while suppressing the field radiated/reflected in other directions. The design and operation of the proposed unidirectional near-field plate are verified through full-wave simulation. The unidirectional near-field plate may find application in high resolution imaging and probing, high density data storage, and wireless power transfer systems. As an example, its utility as a high resolution probe is demonstrated through full-wave electromagnetic simulation.
Transverse magnetic focusing properties of graphene using a ballistic four terminal structure are investigated. The electric response is obtained using the semiclassical billiard model. The transmission exhibits pronounced peaks as a consequence of skipping orbits at the edge of the structure. When we add a pn-junction between the two probes, snake states along the pn-interface appear. Injected electrons are guided by the pn-interface to one of the leads depending on the value of the applied magnetic field. Oscillations in the resistance are found depending on the amount of particles that end up in each lead.